TX2RTL8188CEB8802.11b/g/n RTL8188CE Combo miniCard

RTL8188CEB8 User’s Manual RTL8188CEB8 PCI-Express miniCard User’s Manual Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel.: +886-3-578-0211. Fax: +886-3-577-6047 www.realtek.com.tw RTL8188CEB8 User’s Manual Installing the Wireless PCIe miniCard module Hardware Step 1. Shut down the computer. Step 2. Installing PCIe MiniCard module to PCIe MiniCard connector. Step 3. Connect two external Wi-Fi antennas on I-PEX connectors. step4. Power on the computer. RTL8188CEB8 User’s Manual Un-installing the Wireless PCIe MiniCard module Hardware Step 1. Shut down the computer. Step 2. Remove 2 external Wi-Fi Antennas from the Wireless PCIe MiniCard module board. Step 3. Remove the Wireless PCIe MiniCard module board from PCIe MiniCard connector port. Step 4. Power on the computer. RTL8188CEB8 User’s Manual Installing the Wireless PCIe miniCard module Software Before you proceed with the installation, please notice following descriptions. Note1: The following installation was operated under Windows XP. (Procedures are similar for Windows 98SE/Me/2000.) Note2: If you have installed the WLAN driver & utility before, please uninstall the old version first. If you install the “Realtek11n Single Chip PCIE WLAN NIC Mass production kit” into your laptop computer before installing the software program from the CD. A. Insert the Installation CD to your CD-ROM Drive. Execute the “setup” program. B. Click “Next” to process the installation RTL8188CEB8 User’s Manual C. The system starts to install the software of the WLAN adapter. D. The system will automatically detect the card and display “Hardware Installation” screen. Click “繼續安裝” to continue. RTL8188CEB8 User’s Manual E. Please click “Finish” to complete the installation. RTL8188CEB8 User’s Manual Un-installing the Wireless PCIe MiniCard module Software If you install Realtek11n Single Chip PCIE WLAN NIC Mass production kit into your laptop computer after installing the software program from the CD. When you install Realtek11n Single Chip WLAN PCIE MINICARD Adapter, the following dialog will be shown. A. Uninstall the RTL8188CE WLAN Driver from “Start”→ “All Programs”→ “Realtek11n Single Chip WLAN PCIE NIC Mass production kit” or “Control Panel”“”→“Change or Remove Programs”. Please click “Un-install” (or “Change/Remove”) to remove RTL8188CE WLAN driver. B. Please click “Finish” to complete the un-installation RTL8188CEB8 User’s Manual Installing the Bluetooth USB Module Software If you install the “BlueSuite2.2” into your laptop computer before installing the software program from the CD. A. Insert the Installation CD to your CD-ROM Drive. Execute the “setup” program. B. Click “Next” to process the installation RTL8188CEB8 User’s Manual C. License Agreement D. Select Destination Location . RTL8188CEB8 User’s Manual E. Select Components F. Select Start Menu Folder RTL8188CEB8 User’s Manual G. Select Additional Tasks H Click “Next” to process the installation RTL8188CEB8 User’s Manual I. The system starts to install the software of the CSR BlueSuite. J. Please click “Finish” to complete the installation. Un-installing the Bluetooth USB RTL8188CEB8 User’s Manual Module Software A. Uninstall the CSR Bluetooth Driver from “Start”→ “All Programs”→ “CSR BlueSuite” or “Control Panel”→“Change or Remove Programs”. Please click “Un-install” (or “Change/Remove”) to remove CSR Bluetooth driver. B. Please click “Yse” to complete the un-installation

Report No.: 080215 Page No. : E1 of E7 Appendix E. Antenna List Report No.: 080215 Page No. : E2 of E7 Table for Filed Antenna Peak Gain (dBi) No. Brand Ant. Type Con. Type 2.4GHz Model No. 1 WNC PIFA IPEX Main: 3.95 Aux.: 3.90 DQ661500301 2 Wan shih Dipole IPEX 2.0 TN1WFI0009A 3 WNC PIFA IPEX Main: -2.50 Aux.: -1.12 Main: 25.90970.021 Aux.: 25.90970.031 4 Smart Approach PIFA IPEX Main: 0.90 Aux.: 2.75 Main: SE-042C0-ECL30 Aux.: SE-042D0-ECL30 5 ACON PIFA IPEX Left: 1.89 Right: -2.13 Left: 25.90915.041 Right: 25.90915.051 6 WHAYU PIFA IPEX Main: -2.12 Aux.: -2.49 MSA-00005A 7 Quanta PIFA IPEX TX 1: 1.8 TX 2: -0.3 37LX6AATP00 8 Quanta PIFA IPEX TX 1: 0.3 TX 2: 1.7 37LX7AATP00 9 Quanta PIFA IPEX TX: 1.0 RX: 0.2 3ASP8AATP20 10 NISSEI PIFA IPEX TX: 1.80 RX: 0.54 TX: 3172509 RX: 3172467 11 Amphenol PIFA IPEX TX: 1.68 RX: 1.47 TX: LX0968-11-000-R RX: LX0970-11-000-R 12 FOXCONN PIFA IPEX TX: 1.10 RX: -0.40 TX: WDAN-L1ML3002-DF RX: WDAN-L1ML3001-DF 13 NISSEI PIFA IPEX TX: -0.61 RX: -0.83 TX: 3176674 RX: 3176658 14 FOXCONN PIFA IPEX TX: -0.88 RX: 1.16 TX: 024-01F0-2243 RX: 024-01F0-2242 15 NISSEI PIFA IPEX TX: 1.99 RX: 1.35 TX: 3172566 RX: 3172525 16 Amphenol PIFA IPEX TX: 1.57 RX: 1.61 TX: LX0983-11-000-R RX: LX0980-11-000-R 17 Hitachi PIFA IPEX TX: 1.54 RX: 1.82 TX: HMT14-AUX RX: HMT14-MAIN 18 FOXCONN PIFA IPEX TX: 1.43 RX: 1.71 TX: WDAN-L1WK1002-DF RX: WDAN-L1WK1001-DF 19 NISSEI PIFA IPEX TX: 1.26 RX: 1.88 TX: 3210002 RX: 3209970 20 ACON PIFA IPEX TX: -0.86 RX: -0.96 TX: APM6P-700034 RX: APM6P-700033 21 Amphenol PIFA IPEX TX: -1.60 RX: -1.85 TX: 14G152168131LV RX: 14G152168231LV 22 ACON PIFA IPEX TX: -0.23 RX: -1.32 TX: APM6P-700029 RX: APM6P-700027 23 TYCO PIFA IPEX TX: 1.52 RX: -2.39 TX: 2023944-1 RX: 2023940-1 24 ACON PIFA IPEX TX: -0.74 RX: -1.16 TX: APM6P-700030 RX: APM6P-700028 Report No.: 080215 Page No. : E3 of E7 Peak Gain (dBi) No. Brand Ant. Type Con. Type 2.4GHz Model No. 25 TYCO PIFA IPEX TX: -0.11 RX: -0.58 TX: 2023950-1 RX: 2023946-1 26 ACON PIFA IPEX TX: 1.27 RX: -1.21 TX: 25.90702.001 RX: 25.90700.001 27 ACON PIFA IPEX TX: 1.21 RX: 1.37 TX: 25.90802.001 RX: 25.90800.001 28 ACON PIFA IPEX TX: 1.04 RX: 1.17 TX: 25.90597.001 RX: 25.90598.001 29 Wistron NW PIFA IPEX TX: 0.59 RX: 1.94 TX: 25.90586.001 RX: 25.90587.001 30 ACON PIFA IPEX TX: -0.13 RX: -0.42 TX: 25.90654.001 RX: 25.90653.001 31 Wistron NW PIFA IPEX TX: 0.31 RX: -0.52 TX: 25.90650.001 RX: 25.90649.001 32 ACON PIFA IPEX TX: 0.64 RX: -0.39 TX: 25.90676.001 RX: 25.90675.001 33 Wistron NW PIFA IPEX TX: 1.32 RX: -1.53 TX: 25.90670.001 RX: 25.90669.001 34 Quanta PIFA IPEX TX: -0.40 RX: 0.10 TX: DQ6GC200200 RX: DQ6GC200100 35 Quanta PIFA IPEX TX: 0.7 RX: -1.3 TX: DQ6GC300200 RX: DQ6GC300100 36 ACON PIFA IPEX TX: 1.16 RX: -0.04 TX: 25.90930.001 RX: 25.90929.001 37 Ethertronics PIFA IPEX TX: -0.59 RX: 0.60 TX: 25.90935.001 RX: 25.90934.001 38 Wistron NW PIFA IPEX TX: -0.93 RX: 0.87 TX: 25.90920.001 RX: 25.90919.001 39 ACON PIFA IPEX TX: -2.64 RX: -0.37 TX: C-1335-11-000-26 RX: C-1334-11-000-26 40 Wistron NW PIFA IPEX TX: 0.74 RX: 0.77 TX: 25.90980.001 RX: 25.90979.001 41 Quanta PIFA IPEX TX: -0.10 RX: -0.10 TX: QADCFL3_WLA RX: QADCFL3_WL_M 42 QUANTA PIFA IPEX TX: -1.40 RX.: -0.50 TX: QADCPS1_WL_A RX.: QADCPS1_WL_M 43 Hitachi PIFA IPEX Main: 0.58 Aux.: 1.12 HFT40 44 Hitachi PIFA IPEX Main: -1.65 Aux.: -0.92 HFT60 45 WNC PIFA IPEX Main: -1.10 Aux.: 1.76 Main: 81.EE215.002 Aux.: 81.EE215.001 46 WNC PIFA IPEX Main: 1.18 Aux. 1.75 WNC002 47 Tyco PIFA IPEX Main: 3.45 Aux: 2.41 MIMO: 1.04 TBN001 48 Tyco PIFA IPEX Main: -1.11 Aux.: -1.11 MIMO: -0.95 TBN003 Report No.: 080215 Page No. : E4 of E7 Peak Gain (dBi) No. Brand Ant. Type Con. Type 2.4GHz Model No. 49 Hitachi PIFA IPEX TX 1: 2.19 TX 2: -0.33 HBY07 50 Hitachi PIFA IPEX TX 1: 2.91 TX 2: 2.82 HBY051 51 Hitachi PIFA IPEX TX 1: 0.27 TX 2: 0.02 HBY052 52 Hitachi PIFA IPEX TX 1: 1.30 TX 2: 2.42 HBY061 53 Hitachi PIFA IPEX TX 1: -1.04 TX 2: -1.19 HBY062 54 Hitachi PIFA IPEX TX 1: -1.74 TX 2: 1.16 HFT65 55 Hitachi PIFA IPEX Main: 0.87 Aux.: 1.94 HCT01 56 FOXCONN PIFA IPEX TX 1: -0.43 TX 2: -0.7 WDAN-TQ 57 Tyco PIFA IPEX -1.11 TBN005 & TBN006 58 WNC PIFA IPEX Main: 2.40 Aux.: 1.50 WNC004 59 WNC PIFA IPEX Main: 1.19 Aux.: 0.28 WNC001 60 WNC PIFA IPEX Main: 0.52 Aux.: 1.07 WNC003 61 WNC PIFA IPEX Main: -2.76 Aux.: -3.64 WNC005 62 WNC PIFA IPEX Main: 0.42 Aux.: 0.79 MIMO: 0.14 81.EJZ 63 WNC PIFA IPEX Main: 0.86 Aux.: -0.08 81.EJT 64 Tyco (20-D1130002D) PIFA IPEX TX1: -0.10 TX2: -0.92 TX 3: 0.56 TBN008 65 Tyco (20-D1130002D) PIFA IPEX TX: -0.10 RX: -0.92 TBN008 66 Tyco PIFA IPEX Main: 0.28 Aux.: -0.83 TBN004 67 TYCO PIFA IPEX TX 1: 1.98 TX 2: 1.97 TX 3: -0.88 TBN007 68 Hitachi PIFA IPEX -0.80 HFS23 69 Hitachi PIFA IPEX 0.64 HFS40 70 TYCO (20238740-1) PIFA IPEX TX 1: 0.47 TX 2: 0.06 TX 3: 1.65 TBN008 71 TYCO (2023750-1) PIFA IPEX TX 1: 0.47 TX 2: 0.06 TBN008 Report No.: 080215 Page No. : E5 of E7 Peak Gain (dBi) No. Brand Ant. Type Con. Type 2.4GHz Model No. 72 TYCO (2023772-1) PIFA IPEX TX 1: -2.60 TX 2: -0.26 TX 3: -0.91 TBN008 73 TYCO (2023770-1) PIFA IPEX TX 1: -2.60 TX 2: -0.26 TBN008 74 Smart Approach PIFA IPEX TX 1: 2.37 TX 2: 1.59 03-FR021-016 75 WNC PIFA IPEX Main: 2.71 Aux.: 1.75 MIMO: 2.57 Main: 81.EEO15.001 Aux.: 81.EEO15.002 MIMO: 81.EEO15.003 76 WNC PIFA IPEX Main: 2.23 Aux.: 1.18 Main: 81.EHD15.003 Aux.: 81.EHD15.002 77 WNC PIFA IPEX TX1: 2.3 TX2.: -0.77 TX1: 81.EHD15.004 TX2.: 81.EHD15.005 78 WNC PIFA IPEX Main: -1.51 Aux.: -0.49 Main: 81.EHD15.004 Aux.: 81.EHD15.006 79 WNC PIFA IPEX Main: -1.51 Aux.: -1.10 Main: 81.EHD15.004 Aux.: 81.EHD15.007 80 WNC PIFA IPEX TX1: 1.86 TX2: 1.19 TX1: 81.EHD15.G09 TX2: 81.EHD15.G10 81 Foxconn PIFA IPEX Main: -0.28 Aux.: -1.24 Main: WDAN-M1WC1001-DF Aux.: WDAN-M1MM1001-DF 82 Amphenol KAE PIFA IPEX Main: 2.49 Aux.: 0.58 MIMO: 0.65 Main: SS-03-03-099 Aux.: SS-03-03-100 MIMO: SS-03-03-101 83 Foxconn PIFA IPEX Main: -0.28 Aux.: -0.14 Main: WDAN-M1WC1001-DF Aux.: WDAN-M1BN1001-DF 84 Foxconn PIFA IPEX 0.68 WDAN-M1NY1001-DF 85 Foxconn PIFA IPEX TX1: …

Text truncated - open the document above for the full version.

Page No. : 9 Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel: 886-3-5780211 Fax: 886-3-5776598 Date: 2010/10/4 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Confidentiality Request for FCC ID：TX2RTL8188CEB8 Gentlemen: The form 731 and application have been electronically submitted and any attachments will be up loaded to your web site to be used in obtaining a grant of certification. Short-term Pursuant to DA 04-1705 of the Commission’s pubic notice, we request short-term confidential treatment for the following information until 45 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: 1. External Photos 2. Internal Photos 3. Test Setup photos 4. User’s Manual Permanent Realtek Semiconductor Corp. requests that the material in the following files be withheld from public disclosure in accordance with Section 0.459 of the Commission’s Rules, 47 C.F.R. 0.459, following grant of the application. 1. Block Diagram 2. Circuit Diagram 3. Operational Description Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Note: The registered grantee contact is not available, Judy Hsu is signing for grantee contact. He can be reached at email : [email protected]. Sincerely, Applicant’s company name : Realtek Semiconductor Corp. Applicant’s company address : No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Signature : _____________________________ Signed for Ricky Lee Job Title and Dept. : Ricky Lee / Assistant Project Manager E-Mail : [email protected] Tel. : 886-3-5780211

Page No. : 14 Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel: 886-3-5780211 Fax: 886-3-5776598 DoC Attestation Letter Date: 2010/10/4 We Realtek Semiconductor Corp., as the grantee of this project FCC ID: TX2RTL8188CEB8, would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures. Regards, Note: The registered grantee contact is not available, Judy Hsu is signing for grantee contact. He can be reached at email : [email protected]. FCC Grantee contact person information. Applicant’s company name : Realtek Semiconductor Corp. Applicant’s company address : No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Signature : _____________________________ Signed for Ricky Lee Job Title and Dept. : Ricky Lee / Assistant Project Manager E-Mail : [email protected] Tel. : 886-3-5780211

Page No. : 18 Module Approval Request Letter Subject: Module Approval Date: 2010/10/4 FCC ID: TX2RTL8188CEB8 Dear Reviewer, We, Sporton International Inc., are authorized by Realtek Semiconductor Corp. to have their state-of-the-art 802.11b/g/n RTL8188CE Combo miniCard approved under module approval authorization. The application of this module is specified to mobile host equipment. The requirements regulated in Public Notice DA00-1407 have been fulfilled and clearly explained below. 1. The requirement of RF shielding: The shielding of the radio portion can be demonstrated in exhibition External Photo. 2. The requirement of buffered inputs: Buffered data inputs stage has been integrated in chip RTL8188CE. 3. The requirement of power supply regulation: No power regulator can provide stability power source. But specific of hosts have 3.3Vdc regulator to provide stability power via mini-PCI interface to EUT. 4. The requirements of section 15.203 and 15.204(C): The requirements of antenna connector and spurious emission have been fulfilled. Please reference the exhibition Test Report. 5. The requirement of stand-alone test configuration: Please reference exhibition Test Configuration Photo for the stand-alone test configuration. 6. The requirement of labeling: The instruction on the labeling rule of the end product has been stated in the users manual of this module. Please also see the exhibition Label Sample. 7. The requirement of compliance on specific rule or operating requirements: The required FCC rule has been fulfilled and all the instructions for maintaining compliance has been clearly stated in the Users Manual. 8. The requirement of RF exposure: Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. Please do not hesitate to contact me for any questions of this request letter. Thank you. Company name : Sporton International Inc. Company Address : No.8, Lane 724, Bo-ai St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Signature : Name : Leo Huang Job Title : Manager

Page No. : 2 Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel: 886-3-5780211 Fax: 886-3-5776598 Power of Attorney Date: 2010/10/4 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : [email protected] I am therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment: Realtek / RTL8188CEB8 FCC ID: TX2RTL8188C EB8 Product name: 802.11b/g/n RTL8188CE Combo miniCard Note: The registered grantee contact is not available, Judy Hsu is signing for grantee contact. He can be reached at email : [email protected]. FCC Grantee contact person information. Applicant’s company name : Realtek Semiconductor Corp. Applicant’s company address : No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Signature : _____________________________ Signed for Ricky Lee Job Title and Dept. : Ricky Lee / Assistant Project Manager E-Mail : [email protected] Tel. : 886-3-5780211

SPORTON International Inc. PAGE NUMBER : A1 OF A4 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 APPENDIX A. Photographs of EUT <Main Source> SPORTON International Inc. PAGE NUMBER : A2 OF A4 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 frame and cover) <Second Source> SPORTON International Inc. PAGE NUMBER : A3 OF A4 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A4 OF A4 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255

Realtek RTL8188CEB8 Label description Label location <Top side on metal shielding> Label Here

SPORTON International Inc. PAGE NUMBER : A1 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 APPENDIX A. Photographs of EUT <Main Source>: EUT Type 1: Dual Port Diversity Transmitter (with assembly by soldering frame and cover) SPORTON International Inc. PAGE NUMBER : A2 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 <Main Source>: EUT Type 1: Dual Port Diversity Transmitter (with one piece splicing by soldering) SPORTON International Inc. PAGE NUMBER : A3 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A4 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 <Main Source>: EUT Type 2: Dual Port Fixed Path Transmitter-Fixed (with assembly by soldering frame and cover) SPORTON International Inc. PAGE NUMBER : A5 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 <Main Source>: EUT Type 2: Dual Port Fixed Path Transmitter-Fixed (with one piece splicing by soldering) SPORTON International Inc. PAGE NUMBER : A6 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A7 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 <Main Source>: EUT Type 3: Single Port Diversity Transmitter (with assembly by soldering frame and cover) SPORTON International Inc. PAGE NUMBER : A8 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 <Main Source>: EUT Type 3: Single Port Diversity Transmitter (with one piece splicing by soldering) SPORTON International Inc. PAGE NUMBER : A9 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A10 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 <Second Source>: EUT Type 1: Dual Port Diversity Transmitter (with assembly by soldering frame and cover) SPORTON International Inc. PAGE NUMBER : A11 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 <Second Source>: EUT Type 1: Dual Port Diversity Transmitter (with one piece splicing by soldering) SPORTON International Inc. PAGE NUMBER : A12 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A13 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 <Second Source>: EUT Type 2: Dual Port Fixed Path Transmitter-Fixed (with assembly by soldering frame and cover) SPORTON International Inc. PAGE NUMBER : A14 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 <Second Source>: EUT Type 2: Dual Port Fixed Path Transmitter-Fixed (with one piece splicing by soldering) SPORTON International Inc. PAGE NUMBER : A15 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A16 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 <Second Source>: EUT Type 3: Single Port Diversity Transmitter (with assembly by soldering frame and cover) SPORTON International Inc. PAGE NUMBER : A17 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255 <Second Source>: EUT Type 3: Single Port Diversity Transmitter (with one piece splicing by soldering) SPORTON International Inc. PAGE NUMBER : A18 OF A18 TEL : 886-2-2696-2468 ISSUED DATE : Oct. 05, 2010 FAX : 886-2-2696-2255

Report No.: FR080215 FCC ID: TX2RTL8188CEB8 Page No. : C1 of C5 Appendix C. Maximum Permissible Exposure Report No.: FR080215 FCC ID: TX2RTL8188CEB8 Page No. : C2 of C5 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) ＝ d GP××30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Peak RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d GP × ×× From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Report No.: FR080215 FCC ID: TX2RTL8188CEB8 Page No. : C3 of C5 1.3. Calculated Result and Limit 1.3.1. For WLAN Function: <For Main Source – EUT 2 (Mode 1 with Dipole Antenna)>: Antenna Type : Dipole Antenna Max Peak Output Power for IEEE 802.11g: 26.21 dBm Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power ( mW ) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 2.00 1.5849 26.2100 417.8304 0.131811 1 Complies <For Main Source – EUT 2 (Mode 2 with PIFA Antenna)>: Antenna Type : PIFA Antenna Max Conducted Power for IEEE 802.11g: 26.21 dBm Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power ( mW ) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 3.90 2.4547 26.2100 417.8304 0.204150 1 Complies <For Second Source – EUT 2 (Mode 1 with Dipole Antenna)>: Antenna Type : Dipole Antenna Max Conducted Power for IEEE 802.11g: 26.01 dBm Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power ( mW ) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 2.00 1.5849 26.0100 399.0249 0.125878 1 Complies <For Second Source – EUT 2 (Mode 2 with PIFA Antenna)>: Antenna Type : PIFA Antenna Max Conducted Power for IEEE 802.11g: 26.01 dBm Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power ( mW ) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 3.90 2.4547 26.0100 399.0249 0.194962 1 Complies Report No.: FR080215 FCC ID: TX2RTL8188CEB8 Page No. : C4 of C5 1.3.2. For Bluetooth Function: <For Main Source – EUT 2 (Mode 1 with Dipole Antenna)>: Antenna Type : Dipole Antenna Max Peak Output Power for bluetooth: 11.69 dBm Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power ( mW ) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 2.00 1.5849 11.6900 14.7571 0.004655 1 Complies <For Main Source – EUT 2 (Mode 2 with PIFA Antenna)>: Antenna Type : PIFA Antenna Max Conducted Power for bluetooth: 11.69 dBm Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power ( mW ) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 3.95 2.4831 11.6900 14.7571 0.007294 1 Complies <For Second Source – EUT 2 (Mode 1 with Dipole Antenna)>: Antenna Type : Dipole Antenna Max Conducted Power for bluetooth: 11.63 dBm Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power ( mW ) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 2.00 1.5849 11.6300 14.5546 0.004591 1 Complies <For Second Source – EUT 2 (Mode 2 with PIFA Antenna)>: Antenna Type : PIFA Antenna Max Conducted Power for bluetooth: 11.63 dBm Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power ( mW ) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 3.95 2.4831 11.6300 14.5546 0.007194 1 Complies Report No.: FR080215 FCC ID: TX2RTL8188CEB8 Page No. : C5 of C5 1.3.3. For Co-Location: CONCULSION: Both of the WLAN and Bluetooth can transmit simultaneously, the formula of calculatedthe MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.204150 / 1 + 0.007294 / 1 = 0.211444, which isless than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit.

Report No.: FR080215 FCC ID: TX2RTL8188CEB8 Page No. : D1 of D5 Appendix D. Co-location Report Report No.: FR080215 FCC ID: TX2RTL8188CEB8 Page No. : D2 of D5 1. Results of Radiated Emissions for Co-located <For Main Source>: Temperature 23°C Humidity 53% Test Engineer Satoshi Yang Configurations 2.4GHz Bluetooth + 2.4GHz WLAN Horizontal Report No.: FR080215 FCC ID: TX2RTL8188CEB8 Page No. : D3 of D5 Vertical Report No.: FR080215 FCC ID: TX2RTL8188CEB8 Page No. : D4 of D5 <For Second Source>: Temperature 23°C Humidity 53% Test Engineer Satoshi Yang Configurations 2.4GHz Bluetooth + 2.4GHz WLAN Horizontal Report No.: FR080215 FCC ID: TX2RTL8188CEB8 Page No. : D5 of D5 Vertical

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: 01 FCC RADIO TEST REPORT Applicant’s company Realtek Semiconductor Corp. Applicant Address No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan FCC ID TX2RTL8188CEB8 Manufacturer’s company Realtek Semiconductor Corp. Manufacturer Address No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Product Name 802.11b/g/n RTL8188CE Combo miniCard Brand Name Realtek Model Name RTL8188CEB8 Test Rule 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 2400 ~ 2483.5MHz Received Date Jul. 23, 2010 Final Test Date Sep. 29, 2010 Submission Type Original Equipment Statement Test result included is only for the Bluetooth part of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.4-2003 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR080215AB Report Format Version: 01 Page No. : i of ii FCC ID: TX2RTL8188CEB8 Issued Date : Oct. 05, 2010 Table of Contents 1. CERTIFICATE OF COMPLIANCE ......................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT .......................................................................................................................... 2 3. GENERAL INFORMATION .................................................................................................................................. 3 3.1. Product Details....................................................................................................................................................................................3 3.2. Accessories .........................................................................................................................................................................................3 3.3. Table for Filed Antenna.......................................................................................................................................................................4 3.4. Table for Carrier Frequencies .............................................................................................................................................................6 3.5. Table for Test Modes ...........................................................................................................................................................................6 3.6. Table for Testing Locations..................................................................................................................................................................8 3.7. Table for Supporting Units ...................................................................................................................................................................8 3.8. Table for Parameters of Test Software Setting .....................................................................................................................................8 3.9. Test Configurations ...........................................................................................................................................................................10 4. TEST RESULT ................................................................................................................................................... 14 4.1. AC Power Line Conducted Emissions Measurement.........................................................................................................................14 4.2. Conducted Peak Output Power Measurement.................................................................................................................................24 4.3. Hopping Channel Separation Measurement ...............................................…

Text truncated - open the document above for the full version.