Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|
| 2 | 15C | 2.42 GHz - 2.45 GHz | 330.00 mW |
Modular TypeLimited Single Modular ApprovalConfidentialityLong Term Grant NotesPower Output listed is conducted. The antennas are self-colocated as documented in this filing and must not otherwise be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only, and the host in which this module is integrated should provide stable 3.3 VDC power to this module through regulator circuit. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This
device approved for use in products which operate as a mobile transmitting device with respect to Rule Part 2.1091. This modular device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. Compliance of this module in its final configuration is the responsibility of
Grantee. Separate approval is required for portable configurations with respect to Rule Part 2.1093. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz.
