TXJ-XRS660UXRS Connect Handheld UHF GMRS Radio

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name GME Pty Ltd Address 17 Gibbon Road Winston Hills 2153 Australia FRN 0014530471 Grantee Code TXJ FCC ID: TXJ-XRS660U Authorized Contact Name Kingsley Allan Contact Phone +61-2-8867-6054 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2026/07/09 Print Name: Kingsley Allan Title: Chief Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name GME Pty Ltd Address 17 Gibbon Road Winston Hills 2153 Australia FRN 0014530471 Grantee Code TXJ FCC ID: TXJ-XRS660U Authorized Contact Name Kingsley Allan Contact Phone +61-2-8867-6054 Contact Email [email protected] We certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. Link to the Covered List: Covered List Applicant Signature: Date: 2026/07/09 Print Name: Kingsley Allan Title: Chief Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

GME Pty Ltd Date: 2025/05/09 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: TXJ-XRS370CU, TXJ-XRS660U, TXJ-XRS330CU, TXJ-XRSPTTU To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with GME Pty Ltd. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Kingsley Allan Title: Chief Engineer Signature: On behalf of Company: GME Pty Ltd Telephone: +61-2-8867-6054 E-mail: [email protected]

GME Pty Ltd Date: 2025/05/09 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: TXJ-XRS370CU, TXJ-XRS660U, TXJ-XRS330CU, TXJ-XRSPTTU LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune UP The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Kingsley Allan Title: Chief Engineer Signature: On behalf of Company: GME Pty Ltd Telephone: +61-2-8867-6054 E-mail: [email protected]

Printing Specifications: XRS-660-U COMPLIANCE LABEL Dimensions: 31.4 (w) x 18.5 (h) mm Stock: Printed on GME P/N 403517 Print: Graphics print 100% Black on above stock Finish: Per above stock Part Number: 404402 Drawing Number: 54084-2 ARTWORK SUMMARY DRAWING # 54084-2 PART # 404402 JIRA REFERENCE GRA-6420 ECO # MPE # N/A SUPPLIER # In-house MADE IN AUSTRALIA FCC ID: TXJ-XRS660U Contains FCC ID: 2ABRU-2564C GME PTY LTD S/N:

` Report No.: SUCR260500045601 Page: 1 of 37 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected] SAR TEST REPORT Application No.: SUCR2605000456AT Applicant: GME Pty Ltd Address of Applicant: 17 Gibbon Rd, Winston Hills NSW 2153, Australia Manufacturer: GME Pty Ltd Address of Manufacturer: 17 Gibbon Rd, Winston Hills NSW 2153, Australia EUT Description: XRS TM connect 5Watt GMRS Two-Way Radio Model No.: XRS-660-U Trade Mark: FCC ID: TXJ-XRS660U Standards: FCC 47CFR §2.1093 Date of Receipt: 2026-05-19 Date of Test: 2026-06-13 to 2026-07-28 Date of Issue: 2026-07-28 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. ` Report No.: SUCR260500045601 Page: 2 of 37 Revision Record Version Description Date Remark 00 Original 2026-07-28 / Authorized for issue by: Prepared By Leon Liu/ Project Engineer Approved By Nick Hu/ Reviewer ` Report No.: SUCR260500045601 Page: 3 of 37 TEST SUMMARY Frequency Band Maximum Reported SAR(W/kg) Front To Face Body 0mm UHF 0.94 1.35 BT <0.10 <0.10 SAR Limited(W/kg) 1.6 Maximum Simultaneous Transmission SAR (W/kg) Scenario Front To Face Body 0mm Sum SAR 0.94 1.35 SPLSR / / SPLSR Limited 0.04 ` Report No.: SUCR260500045601 Page: 4 of 37 Contents 1 General Information ............................................................................................................... 6 1.1 General Description of EUT ........................................................................................ 6 1.2 Test Specification ....................................................................................................... 7 1.3 RF exposure limits ...................................................................................................... 8 1.4 Test Location .............................................................................................................. 9 1.5 Test Engineer ............................................................................................................. 9 1.6 Test Facility ................................................................................................................ 9 2 Laboratory Environment ...................................................................................................... 10 3 SAR Measurements System Configuration ........................................................................ 11 3.1 The SAR Measurement System ................................................................................ 11 3.2 Isotropic E-field Probe EX3DV4 ................................................................................ 13 3.3 Data Acquisition Electronics (DAE) ........................................................................... 14 3.4 SAM Twin Phantom .................................................................................................. 14 3.5 ELI Phantom ............................................................................................................. 15 3.6 Device Holder for Transmitters ................................................................................. 16 3.7 Measurement Procedure .......................................................................................... 17 3.7.1 Scanning procedure ........................................................................................... 17 3.7.2 Data storage ...................................................................................................... 19 3.7.3 Data Evaluation by SEMCAD ............................................................................. 19 4 SAR measurement variability and uncertainty ................................................................... 21 4.1 SAR measurement variability .................................................................................... 21 4.2 SAR measurement uncertainty ................................................................................. 21 5 Description of Test Position ................................................................................................ 22 5.1 Handheld Push-to-Talk Two-way Radios .................................................................. 22 6 SAR System Verification Procedure ................................................................................... 23 6.1 Tissue Simulate Liquid .............................................................................................. 23 6.1.1 Recipes for Tissue Simulate Liquid .................................................................... 23 6.1.2 Measurement for Tissue Simulate Liqui…

Text truncated - open the document above for the full version.

` ReportNo.:SUCR260500045601 Page: 1 of 4 AppendixA DetailedSystemCheckResults 1.SystemPerformanceCheck SystemPerformanceCheck450MHz SystemPerformanceCheck2450MHz Date: 2026/06/13 Test Laboratory: SGS-SAR Lab System Performance Check 450 MHz Head DUT: D450V3; Type: D450V3; Serial: 1103 Communication System: UID 0, CW (0); Frequency: 450 MHz;Duty Cycle: 1:1 Medium: HSL450;Medium parameters used: f = 450 MHz; σ = 0.896 S/m; ε r = 42.777; ρ = 1000 3 kg/m Phantom section: Flat Section DASY 5 Configuration: • Probe: EX3DV4 - SN3982; ConvF(11.49, 11.49, 11.49); Calibrated: 2025/11/07 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 2025/09/08 • Phantom: SAM 8; Type: SAM; Serial: 1824 • DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=15mm, Pin=250mW/Area Scan (11x21x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.28 W/kg Body/d=15mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 38.90 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 1.86 W/kg SAR(1 g) = 1.25 W/kg; SAR(10 g) = 0.826 W/kg Smallest distance from peaks to all points 3 dB below = 8.6 mm Ratio of SAR at M2 to SAR at M1 = 47.2% Maximum value of SAR (measured) = 1.31 W/kg 0 dB = 1.31 W/kg = 1.18 dBW/kg Date: 2026/07/28 Test Laboratory: SGS-SAR Lab System Performance Check 2450MHz DUT: D2450V2; Type: Dipole; Serial: 922 Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL2450;Medium parameters used: f = 2450 MHz; σ = 1.816 S/m; ε r = 40.025; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: lProbe: EX3DV4 -SN3982; ConvF(7.18, 7.67, 7.44); Calibrated: 2025/11/07 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1245; Calibrated: 2025/09/08 lPhantom: SAM 8; Type: SAM; Serial: 1824 lDASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=10mm, Pin=250mW/Area Scan (9x10x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 17.4 W/kg Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 87.07 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 25.2 W/kg SAR(1 g) = 13.1 W/kg; SAR(10 g) = 6.09 W/kg Smallest distance from peaks to all points 3 dB below = 9.2 mm Ratio of SAR at M2 to SAR at M1 = 56.2% Maximum value of SAR (measured) = 16.8 W/kg 0 dB = 16.8 W/kg = 12.25 dBW/kg ` ReportNo.:SUCR260500045601 Page: 4 of 4 -EndoftheAppendix-

` ReportNo.:SUCR260500045601 Page: 1 of 6 AppendixB DetailedTestResults 1.UHF 2.BT Date: 2026/06/13 Test Laboratory: SGS-SAR Lab RPT 467.725MHz Front to Face 25mm Communication System: UID 0, CW (0); Frequency: 467.725 MHz;Duty Cycle: 1:0.5 3 Medium: HSL450;Medium parameters used: f = 468 MHz; σ = 0.9 S/m; ε = 42.559; ρ = 992 kg/m r Phantom section: Flat Section DASY 5 Configuration: lProbe: EX3DV4 -SN3982; ConvF(11.49, 11.49, 11.49); Calibrated: 2025/11/07 lSensor-Surface: 1.4mm (Mechanical Surface Detection) l Electronics: DAE4 Sn1245; Calibrated: 2025/09/08 lPhantom: SAM 8; Type: SAM; Serial: 1824 lDASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Body/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.26 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 46.26 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 2.58 W/kg SAR(1 g) = 1.87 W/kg; SAR(10 g) = 1.41 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid Ratio of SAR at M2 to SAR at M1 = 72.7% Maximum value of SAR (measured) = 2.32 W/kg 0 dB = 2.32 W/kg = 3.65 dBW/kg Date: 2026/06/13 Test Laboratory: SGS-SAR Lab RPT 467.725MHz Back side with Belt clip 0mm Communication System: UID 0, CW (0); Frequency: 467.725 MHz;Duty Cycle: 1:0.5 3 Medium: HSL450;Medium parameters used: f = 468 MHz; σ = 0.9 S/m; ε = 42.559; ρ = 992 kg/m r Phantom section: Flat Section DASY 5 Configuration: lProbe: EX3DV4 -SN3982; ConvF(11.49, 11.49, 11.49); Calibrated: 2025/11/07 lSensor-Surface: 1.4mm (Mechanical Surface Detection) l Electronics: DAE4 Sn1245; Calibrated: 2025/09/08 lPhantom: SAM 8; Type: SAM; Serial: 1824 lDASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Body/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.36 W/kg Configuration/Body/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 51.19 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 3.77 W/kg SAR(1 g) = 2.68 W/kg; SAR(10 g) = 1.96 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid Ratio of SAR at M2 to SAR at M1 = 70.8% Maximum value of SAR (measured) = 3.37 W/kg 0 dB = 3.37 W/kg = 5.28 dBW/kg Date: 2026/07/28 Test Laboratory: SGS-SAR Lab Bluetooth DH5 Front To Face 25mm Communication System: UID 0, Bluetooth (0); Frequency: 2480 MHz;Duty Cycle: 1:1.301 Medium: HSL2450;Medium parameters used: f = 2480 MHz; σ = 1.848 S/m; ε = 39.925; ρ = 992 r 3 kg/m Phantom section: Flat Section DASY 5 Configuration: lProbe: EX3DV4 -SN3982; ConvF(7.18, 7.67, 7.44); Calibrated: 2025/11/07 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1245; Calibrated: 2025/09/08 lPhantom: SAM 8; Type: SAM; Serial: 1824 lDASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Body/Area Scan (11x18x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.00792 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.0120 W/kg SAR(1 g) = 0.00241 W/kg; SAR(10 g) = 0.000685 W/kg Smallest distance from peaks to all points 3 dB below = 5.8 mm Ratio of SAR at M2 to SAR at M1 = 50.1% Maximum value of SAR (measured) = 0.00601 W/kg 0 dB = 0.00601 W/kg = -22.21 dBW/kg Date: 2026/07/28 Test Laboratory: SGS-SAR Lab Bluetooth DH5 Back side with Belt clip 0mm Communication System: UID 0, Bluetooth (0); Frequency: 2480 MHz;Duty Cycle: 1:1.301 Medium: HSL2450;Medium parameters used: f = 2480 MHz; σ = 1.848 S/m; ε r = 39.925; ρ = 992 kg/m 3 Phantom section: Flat Section DASY 5 Configuration: lProbe: EX3DV4 -SN3982; ConvF(7.18, 7.67, 7.44); Calibrated: 2025/11/07 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1245; Calibrated: 2025/09/08 lPhantom: SAM 8; Type: SAM; Serial: 1824 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Body/Area Scan (11x18x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.00819 W/kg Configuration/Body/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.2690 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.0150 W/kg SAR(1 g) = 0.00246 W/kg; SAR(10 g) = 0.000987 W/kg Smallest distance from peaks to all points 3 dB below = 5.3 mm Ratio of SAR at M2 to SAR at M1 = 36.2% Maximum value of SAR (measured) = 0.00777 W/kg 0 dB = 0.00777 W/kg = -21.10 dBW/kg ` ReportNo.:SUCR260500045601 Page: 6 of 6 -EndoftheAppendix-

` ReportNo.:SUCR260500045601 Page: 1 of 27 AppendixC Calibrationcertificate 1.Dipole D450V3-SN1103 D2450V2-SN922 2.DAE DAE4-SN 1245 3.Probe EX3DV4-SN3982 4.DipoleExtend DipoleD450V3SN1103 HeadLiquid Dateof Measurement Return Loss(dB) Δ% Impedance (Ω) ΔΩ Impedance imaginary （ jΩ ） ΔjΩ 2024-06-03-21.6/59/-0.5/ 2025-06-02-21.40.93%58.80.2-0.80.3 DipoleD2450V2SN922 HeadLiquid Dateof Measurement Return Loss(dB) Δ% Impedance (Ω) ΔΩ Impedance imaginary （jΩ） ΔjΩ 2023-08-28-24.3/53.2/5.45/ 2024-08-27-24.10.82%52.90.35.230.22 2025-08-26-24.20.41%530.25.290.16 ` ReportNo.:SUCR260500045601 Page: 27 of 27 -EndoftheAppendix-

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600003002 Page: 1 of 83 TEST REPORT Application No.: FYCR2606000030AT Applicant: GME Pty Ltd Address of Applicant: 17 Gibbon Rd, Winston Hills NSW 2153, Australia Manufacturer: GME Pty Ltd Address of Manufacturer: 17 Gibbon Rd, Winston Hills NSW 2153, Australia Factory: GME Pty Ltd Address of Factory: 17 Gibbon Rd, Winston Hills NSW 2153, Australia Equipment Under Test (EUT): EUT Name: XRS TM Connect Handheld UHF GMRS Radio Model No.: XRS-660-U Trade Mark: FCC ID: TXJ-XRS660U Standard(s) : 47 CFR Part 95, Subpart E Date of Receipt: 2024-09-30 Date of Test: 2024-09-30 to 2024-10-30 for RF Conducted test 2026-06-25 to 2026-06-29 for RSE/ERP test Date of Issue: 2026-07-08 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600003002 Page: 2 of 83 Revision Record Version Chapter Date Modifier Remark 01 2026-07-08 Original Authorized for issue by: Byron Liang/Project Engineer Tree Zhan/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600003002 Page: 3 of 83 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 95, Subpart E, ANSI/TIA 603-E-2016 N/A 47 CFR Part 95, Subpart E 95.1741 & 95.317 & 95.1787 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result GMRS frequency accuracy 47 CFR Part 95, Subpart E, ANSI/TIA 603-E-2016, ANSI C63.26-2015 ANSI/TIA-603- E:2016 ANSI C63.26- 2015 47 CFR FCC Part95.1765 & FCC Part2.1055; Pass Effective Radiated Power (ERP) 47 CFR FCC Part95.1767 & FCC Part2.1046; Pass GMRS authorized bandwidths 47 CFR FCC Part 95.1773 & FCC Part2.1049; Pass GMRS modulation requirements 47 CFR FCC Part 95.1775 & FCC Part2.1047; Pass GMRS Emission Mask 47 CFR FCC Part 95.1779 & FCC Part2.1051; Pass GMRS unwanted emissions 47 CFR FCC Part 95.1779 & FCC Part2.1051; Pass Radiated Spurious Emissions 47 CFR FCC Part 95.1779 & FCC Part2.1053; Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600003002 Page: 4 of 83 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 8 4.3 Measurement Uncertainty .................................................................................................................. 8 4.4 Test Location ...................................................................................................................................... 9 4.5 Test Facility ........................................................................................................................................ 9 4.6 Deviation from Standards ................................................................................................................... 9 4.7 Abnormalities from Standard Conditions ........................................................................................... 9 5 Equipment List ........................................................................................................................................ 10 6 Radio Spectrum Technical Requirement ............................................................................................. 12 6.1 Antenna Requirement ...................................................................................................................... 12 6.1.1 Test Requirement: ....................................................................................................................... 12 6.1.2 Requirement ................................................................................................................................ 12 6.1.3 Conclusion ................................................................................................................................... 13 7 Radio Spectrum Matter Test Results .................................................................................................... 14 7.1 GMRS frequency accuracy .............................................................................................................. 14 7.1.1 E.U.T. Operation .......................................................................................................................... 14 7.1.2 Test Mode Description ................................................................................................................. 14 7.1.3 Test Setup Diagram ..................................................................................................................... 14 7.1.4 Measurement Procedure and Data............................................................................................. 15 7.2 Effective Radiated Power (ERP) ......................…

Text truncated - open the document above for the full version.