TXTPTM20MirX2 Bluetooth Module

PTM20 MirX2 Bluetooth ® Module User Guide V3.0 (24 July, 2023 ) Robert Bosch Power Tools GmbH 70538 Stuttgart Germany Visitor: Max-Lang-Straße 40-46 70771 Leinfelden-Echt- erdingen www.bosch-pt.com Contents 1 General Information .................................................................................................. 2 1.1 Key Specifications ..................................................................................................... 2 1.2 PCBA Electrical Interface .......................................................................................... 3 1.3 RF Shield Marking .................................................................................................... 4 1.4 Placement Requirements on host PCBA (ELO) ........................................................ 5 2 Softwar Detail and Operation .................................................................................... 7 2.1 System Layout .......................................................................................................... 7 2.2 UART Communication Interface ................................................................................ 7 3 Regulatory and Certification Information ................................................................... 8 3.1 Federal Communications Commission (FCC) Statement .......................................... 8 3.2 Canada Statement .................................................................................................. 10 General Inforamtion The PTM20 was designed to be integrated into products as combined equipment, not to be used independently. The nominal size of the Bluetooth module is 25.4mm x 15.0mm x 2.0 mm thick. The difference between PTM20R and PTM20 is the real time clock (RTC) function. Both modules share the same PCB trace layout, electronic parts, physical con- nections arrangement and electrical characteristics except the real time clock related function, i.e. 32.768 kHz crystal. The R designation of the module name is the indication of RTC function. 1.1 Key Specifications The follow lists the key specifications of PTM20 CATEGORY FEATURE SPECIFICATIUON Wireless Specification Bluetooth ® 5.2 Low Energy Frequency Band 2400 MHz to 2483.5 MHz Frequency Range 2402 MHz to 2480 MHz Support Function 2.4 GHz ISM Band Frequency Modulation GFSK Number of Channels 40 Channel Separation 2 MHz Maximum conducted average output power 5 dBm ±1 dBm Antenna Type Integrate PCB, inverted F design Antenna Gain -1.24 dBi Antenna Efficiency -4.5 dB (TBC; coupling + radiation) Receiver Sensitivity -104 dBm (125 kbps) -100 dBm (500 kbps) -97 dBm (1Mbps) -92 dBm (2Mbps) Communication UART Interface Tx, Rx; Baud Rate 115200 TI MCU 2.4 GHz Wireless MCU CC2561R3; output power up to +5 dBm External Memory SPI Flash 16 Mbit, 2.7 V – 3.6 V Electrical Interface VCC 2.7 VDC to 3.6 VDC Current Consumption < 15 mA (RF transmission dependent) GND JTAG TCKC; TMSC JTAG Reset N Active low Miraculix Wake Up active high Mechanical Dimension PCB dimension -25.4 mm x 15.0 mm ( -0.0 / + 0.1 mm) PCB thickness 0.8 mm, 2 layers RF shield can 1.2 mm overall thick (material wall thickness 0.15 mm) Total module thickness 2.0mm ( -0.0 / +0.2 mm) Environment Operating Temperature -10 °C to +50 °C 1.2 PCBA Electrical Interface Top View Bottom View Key components layout (Top View) 1.3 RF Shield Marking The RF shield will receive a laser marking with DMC code, the RB HW part number and revision of the MirX hardware, production week and year, as well as the re- ceived certification ID and approval numbers of FCC and IC. The BT- and CE- symbol will be at the corners. Part Number DMC Code Model Name FW Version & Product Week / Year Industrial Canada ID # FCC ID # 1.4 Module Placement Requirements on the Host PCBA (ELO) (i) This module was designed to be integrated into Bosch Power Tool products to support connectivity functions. (ii) There is no Real Time Clock (RTC) on MirX2. Therefore, if ELO has RTC needs, the RTC function must be added by ELO. (iii) When routing UART traces between ELO and MirX2, R=0 Ohm in-line resis- tors should be used and placed side-by-side as shown below of the GND / TX / RX / VCC signal. This is to aid test sample preparation as the MirX2 UART bus must be disconnected from the ELO and connected to test PC during con- ductive and radiative RF tests. (iv) For better TX/RX performance, high pass filtering capacitor (1 – 2 pF) can be placed between the TX line and GND or RX line and GND on the ELO PCBA just outside the MirX2 soldering pads. (v) The module can be soldered on the host board (ELO) and a clearance must be provided for the antenna where no routing or ground is allowed in any layer. Here is an example of a module placed in a host board. Placing the module at the edge is recommended as it gives the best RF performance and does not require any clearance surrounding the antenna. Module placement on host board: Guidelines for Enclosure and Ground Plane • The type label of the end product must carry a label stating “Contains FCC ID:TXTPTM20” for products sold in the US. • The type label of the end product must carry a label stating “Contains IC:909H-PTM20” for products sold in the Canada. • FCC ID:TXTPTM20 must be on the same line on the type label and must be at least 4pt (or 1.41 mm high) and must be legible. • There should not be any ground directly below the antenna • Ensure that there is no component, mounting screw, or ground plane near the tip of the antenna or the length of antenna. No large components should be placed near the antenna. • No battery cable, microphone cable, or any trace should cross the antenna trace on the PCB on the same side of the antenna. • The antenna should not be covered by a metallic enclosure completely. If the product has a metallic casing or a shield, the casing should not cover the antenna. No metal is allowed in the antenna near field. • Ensure the paint on the plastic enclosure is nonmetallic near the an…

Text truncated - open the document above for the full version.

are Trademarks of Robert Bosch GmbH, Germany Robert Bosch Tool Corporation 1800 W. Central Rd. Mount Prospect, IL 60056 www.bosch.us May 25, 2023 Attention: Application Examiner Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch Re: Certification designating a U.S. agent for service of process pursuant to 47 CFR part §2.911(d)(7) of the FCC rules To whom it may concern, This letter is to certify that Robert Bosch Tool Corporation (“Applicant”) accepts responsibilities to act as its own agent pursuant to 47 CFR part §2.911(d)(7) of the FCC rules for service of process. I consent to the obligation to accept service of process on behalf of the Applicant for all certification applications to the FCC. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC and Intertek if there is any change in the status identified above. Applicant Company Name : Robert Bosch Tool Corporation Contact Name : Josh MACY Address : 1800 West Central Road Mount Prospect IL 60056 U. S. A. Telephone No : 224-232-2192 Email : [email protected] Applicant FRN : 0014548713 Signature: ____________________________________ Date: May 25, 2023

are Trademarks of Robert Bosch GmbH, Germany Robert Bosch Tool Corporation 1800 W. Central Rd. Mount Prospect, IL 60056 www.bosch.us Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts §2.903 and §2.911(d)(5)(ii) of the FCC rules Applicant: Robert Bosch Tool Corporation FCC ID: TXTPTM20 To whom it may concern, Robert Bosch Tool Corporation (“Applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part §2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant is not identified on the Covered List as an entity producing “covered” equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part §1.50002 and required by 47 CFR part §2.911(d)(5)(ii) of the FCC rules. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. ______________________________ [Signature] Josh MACY Regulatory and Agency Approvals Manager (PT/ESS2-NA) Robert Bosch Tool Corporation May 25, 2023

are Trademarks of Robert Bosch GmbH, Germany Robert Bosch Tool Corporation 1800 W. Central Rd. Mount Prospect, IL 60056 www.bosch.us FCC ID: TXTPTM20 To the certification reviewer: We are hereby applying for [full] modular approval of the above-referenced FCC ID, based on compliance with [all] of the criteria as detailed below. Sincerely, ______________________________ [Signature] Josh MACY Regulatory and Agency Approvals Manager (PT/ESS2-NA) Robert Bosch Tool Corporation Part 15 Unlicensed Single Modular Transmitter Approval Justification per 15.212 Requirement per 15.212 reference (i) The radio elements of the modular transmitter must have their own RF shielding. The module has RF shield and shielding is provided by a ground plane on the printed wiring board. (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided. All modulation and data inputs are buffered by circuitry on the RF transmitter chip. (iii) The modular transmitter must have its own power supply regulation. The module RF transmitter chip has integrated voltage regulation over the range of 1.8V to 3.8V. Further power supply regulation is provided by external circuitry of the host equipment over the range of 2.7 to 3.6 volts. May 25, 2023 May 25, 2023 Page 2 of 2 (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). The module has an integrated permanently attached non-replaceable PCB antenna. (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 parameters. Testing was performed with the module extended outside of the host on a special extender board, as shown in the test setup photos. (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. A sample of the host label is provided as an exhibit, showing the FCC identifier of the module. (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The module complies fully with the operating requirements of Part 15 section [247] as demonstrated in the test report exhibit. (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. This module operates under Part 15 section [247], which is exempt from RF exposure evaluation owing to the very low operating power.

are Trademarks of Robert Bosch GmbH, Germany Robert Bosch Tool Corporation 1800 W. Central Rd. Mount Prospect, IL 60056 www.bosch.us Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement Robert Bosch Tool Corporation FCC ID: TXTPTM20 To Whom It May Concern: Robert Bosch Tool Corporation (“Applicant”) hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number (TXTPTM20) under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is May 25, 2023. The Limited Agency Agreement expires on May 24, 2024, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, ______________________________ [Signature] Josh MACY Regulatory and Agency Approvals Manager (PT/ESS2-NA) Robert Bosch Tool Corporation May 25, 2023

are Trademarks of Robert Bosch GmbH, Germany Robert Bosch Tool Corporation 1800 W. Central Rd. Mount Prospect, IL 60056 www.bosch.us May 25, 2023 Attention: Application Examiner RE: Request for Confidentiality Applicant: [Robert Bosch Tool Corporation] FCC ID: [TXTPTM20] To Whom It May Concern: Permanent Confidentiality Request is hereby submitted by Robert Bosch Tool Corporation to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block Diagrams • Detailed Operational/Functional Description Short-term Confidentiality Request is hereby submitted by Robert Bosch Tool Corporation to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization: • Test setup photos • External photos • Internal photos • User manual are Trademarks of Robert Bosch GmbH, Germany May 25, 2023 Page 2 of 2 Rationale for request for confidentiality: Robert Bosch Tool Corporation has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] [For FCC certification; delete for TCB certification: The fee for confidentiality has been submitted along with the fee for certification.] If you have questions or need further information, please contact the undersigned. Sincerely, ______________________________ [Signature] Josh MACY Regulatory and Agency Approvals Manager (PT/ESS2-NA) Robert Bosch Tool Corporation

Page 1 of 1 FCC ID: TXTPTM20 IC: 909H-PTM20 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo

Ind. Change/Aend. YYYYMMDD Drawn/Gez. Checked/Gepr. Releas./Freig. BWN Resp. dept./Verantw. Abt. Add. info./Zus. Info. Size/Gst. Missed details/Fehlende Angaben Treatment/ Behandlung Mat./Stoff From/Aus Repl. for Doc.type Sheet/Bl. Ind. DP/TD Repl. by Format MNR Scale/M.stab Mat.meets/Stoffe s Crit. P. Lang./Spr. Wght./Gew. Syst. C B A D E F C B D E 4 3 2 5 6 7 8 4 3 2 1 5 6 7 8 © Robert Bosch Power Tools GmbH. Alle Rechte vorbehalten, auch bzgl. jeder Verfuegung, Verwertung, Reproduktion, Bearbeitung,Weitergabe sowie für den Fall von Schutzrechtsanmeldungen. © Robert Bosch Power Tools GmbH. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. A F 1 1107 AALIL1DON177PT-MT/EXP2 -- -- -- -- -- -- en/de-- PRINTED-BOARD ASSEMBLY MIRACULUX, MTFW LEITERPLATTE BESTUECKT 1/1 --5:1DRW1 600 A02 B97AAA3 N2580-1PE 1 600 A02 B97 not release 1600A02C16 MTFW FIRMWARE & LASER MARKING (Laser etching to metal shielding surface) MIRACULIX PCB CIRCUIT MTFW FIRMWARE (PER LASER MARKING 1600A02C16) METAL SHEILDING (SOLDERED TO PCBA) 5:1

Page 1 of 1 FCC ID: TXTPTM20 IC: 909H-PTM20 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo

Page 1 of 9 Report No.: 2301123744RFC-2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 RF EXPOSURE EVALUATION REPORT Product Name: MirX2 Bluetooth Module Trade Mark: N/A Model No. / HVIN: PTM20 Add. Model No. / HVIN: N/A Report Number: 2301123744RFC-2 Test Standards: FCC 47 CFR Part 1 Subpart I RSS-102 Issue 5 FCC ID: TXTPTM20 IC: 909H-PTM20 Test Result: PASS Date of Issue: July 19, 2023 Prepared for: Robert Bosch Tool Corp. 1800 W. Central Road, Mount Prospect, IL 60056, U. S. A. Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Kieron Luo Henry Lu Project Engineer Team Leader Approved by: Date: July 19, 2023 Kevin Liang Assistant Manager Page 2 of 9 Report No.: 2301123744RFC-2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 Version Version No. Date Description V1.0 July 19, 2023 Original Page 3 of 9 Report No.: 2301123744RFC-2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 OTHER INFORMATION ......................................................................................................................................... 4 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................................................... 5 1.6 DEVIATION FROM STANDARDS ............................................................................................................................ 5 1.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 5 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 5 2. EQUIPMENT LIST .................................................................................................................................................... 5 3. MPE EVALUATION ................................................................................................................................................... 6 3.1 REFERENCE DOCUMENTS FOR EVALUATION ........................................................................................................ 6 3.2 MPE COMPLIANCE REQUIREMENT ..................................................................................................................... 6 3.2.1 LIMITS ................................................................................................................................................... 6 3.2.2 TEST PROCEDURE ................................................................................................................................. 7 3.3 MPE CALCULATION METHOD ............................................................................................................................. 7 3.4 MPE CALCULATION RESULTS ............................................................................................................................ 7 3.4.1 FOR BT ................................................................................................................................................. 7 APPENDIX 1 PHOTOS OF TEST SETUP ....................................................................................................................... 9 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS ................................................................................... 9 Page 4 of 9 Report No.: 2301123744RFC-2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 1. GENERAL INFORMATION 1.1 CLIENT INFORMATION Applicant: Robert Bosch Tool Corp. Address of Applicant: 1800 W. Central Road, Mount Prospect, IL 60056, U. S. A. Manufacturer: Robert Bosch Tool Corp. Address of Manufacturer: 1800 W. Central Road, Mount Prospect, IL 60056, U. S. A. Factory 1: Huizhou Blueway Electronics Co., Ltd. Address of Factory 1: No. 101 Hechang Road 5.W., Zhongkai, High-Tech Industry Develoipment Zone, Huizhou, Guangdong Province, China Factory 2: Elrad Electronics (DongGuan) co. Ltd. Address of Factory 2: 3rd Industrial Zone, Tiantou Village, HengLiTow, Dongguan City, Guangdong Povince, China 1.2 EUT INFORMATION Product Name: MirX2 Bluetooth Module Model No. / HVIN: PTM20 Add. Model No. / HVIN: N/A Trade Mark: N/A DUT Stage: Produc…

Text truncated - open the document above for the full version.

Page 1 of 49 Report No.: 2301123744RFC-3 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 TEST REPORT Product Name: MirX2 Bluetooth Module Trade Mark: N/A Model No. / HVIN: PTM20 Add. Model No. / HVIN: N/A Report Number: 2301123744RFC-3 Test Standards: FCC 47 CFR Part 15 Subpart C RSS-247 Issue 2 RSS-Gen Issue 5 FCC ID: TXTPTM20 IC: 909H-PTM20 Test Result: PASS Date of Issue: July 19, 2023 Prepared for: Robert Bosch Tool Corp. 1800 W. Central Road, Mount Prospect, IL 60056, U. S. A. Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Kieron Luo Henry Lu Project Engineer Team Leader Approved by: Date: July 19, 2023 Kevin Liang Assistant Manager Page 2 of 49 Report No.: 2301123744RFC-3 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 Version Version No. Date Description V1.0 July 19, 2023 Original Page 3 of 49 Report No.: 2301123744RFC-3 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 OTHER INFORMATION ......................................................................................................................................... 5 1.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 5 1.6 TEST LOCATION ................................................................................................................................................. 5 1.7 TEST FACILITY ................................................................................................................................................... 5 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 6 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 6 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 6 1.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 6 2. TEST SUMMARY ...................................................................................................................................................... 7 3. EQUIPMENT LIST .................................................................................................................................................... 8 4. TEST CONFIGURATION .......................................................................................................................................... 9 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ........................................................................................................ 9 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................... 9 4.1.2 RECORD OF NORMAL ENVIRONMENT AND TEST SAMPLE .......................................................................... 9 4.2 TEST CHANNELS ............................................................................................................................................... 9 4.3 EUT TEST STATUS ............................................................................................................................................ 9 4.4 TEST SETUP .................................................................................................................................................... 10 4.4.1 FOR RADIATED EMISSIONS TEST SETUP ................................................................................................ 10 4.4.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 11 4.4.3 FOR CONDUCTED RF TEST SETUP ........................................................................................................ 12 4.5 SYSTEM TEST CONFIGURATION ........................................................................................................................ 12 4.6 DUTY CYCLE ...........…

Text truncated - open the document above for the full version.

Page 25 of 49 Report No.: 2301123744RFC-3 Shenzhen UnionTrust Quality and Technology Co., Ltd. Add…

Text truncated - open the document above for the full version.