U4P-1350002Broadband Wireless Gateway

Install Guide EZ Connect™ Wireless Cable Modem Gateway SMC8014W-G Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2006 by SMC Networks, Inc. 38 Tesla Irvine, California 92618 All rights reserved. Trademarks Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. TABLE OF CONTENTS CHAPTER 1 | Introduction Features and Benefits Package Contents Minimum Requirements CHAPTER 2 | Getting to know the EZ Connect™ Wireless Cable Modem Gateway LED Indicators Rear Panel Description Resetting and Restoring the EZ Connect™ Wireless Cable Modem Gateway CHAPTER 3 | Installation Basic Installation Procedure CHAPTER 4 | Configuring your Computer Configuring Windows 95/98/Me Configuring Windows 2000 Configuring Windows XP Configuring a Macintosh Computer CHAPTER 5 | Configuring the EZ Connect™ Wireless Cable Modem Gateway Browser Configuration Disable Proxy Connection Accessing the EZ Connect™ Wireless Cable Modem Gateway Web Management CHAPTER 6 | Navigating the Web-based Administration Making Configuration Changes System WAN LAN Routing Wireless NAT Firewall Tools VPN Status APPENDIX A | Telnet/CLI Information APPENDIX B | Troubleshooting APPENDIX C | Technical Specifications APPENDIX D | Compliances APPENDIX E | Technical Support CHAPTER 1 | Introduction Congratulations on your purchase of the EZ Connect™ Wireless Cable Modem Gateway. SMC is proud to provide you with a powerful yet simple communication device for connecting your local area network (LAN) to the Internet. Features and Benefits • EZ 3-Click Installation Wizard - A new and improved way to install your Gateway Modem. In 3 simple clicks, you will be connected to the Internet. • Internet connection to cable modem service via an integrated cable modem port • Local network connection via 10/100 Mbps Ethernet ports or 54 Mbps wireless interface. • 802.11g - interoperable with multiple vendors. • Wireless: WEP and WPA encryption, Hide SSID, and MAC Filtering • DHCP for dynamic IP configuration, and DNS for domain name mapping. • Firewall with Stateful Packet Inspection, client privileges, hacker prevention, DoS, and NAT. • Virtual Private Network (VPN) end-point support using PPTP, L2TP, or IPSec • VPN pass-through support using PPTP, L2TP, or IPSec • User-definable application sensing tunnel supports applications requiring multiple connections • Built-in Parental controls allow you to limit certain web sites – configurable by time and date. • Email alerts when hacking attempts on the users network are made • Easy setup through a web browser on any operating system that supports TCP/IP • Compatible with all popular Internet applications Package Contents Before installing the EZ Connect™ Wireless Cable Modem Gateway, verify that you have the items listed under below. Also be sure that you have the necessary cabling. If any of the items are missing or damaged, contact your local SMC distributor. • 1 - EZ Connect™ Wireless Cable Modem Gateway • 1 - Power adapter (12V/1.25A) • 1 - CAT-5 Ethernet cable • 1 - USB Cable • Installation CD, including: o User Guide o USB Drivers If possible, retain the carton and original packing materials in case there is a need to return the product. Please register your product on SMC’s web site at http://www.smc.com. System Requirements You must meet the following minimum requirements: • Provisioned Internet access from a cable operator that has approved the SMC8014W-G • A computer equipped with a wired or wireless network adapter with TCP/IP installed. • A Java-enabled web browser, such as Microsoft Internet Explorer 5.5 or above, or Netscape Communicator 5.0 or above. • Windows 98 Second Edition or higher is required for USB driver support. CHAPTER 2 | Getting to Know the EZ Connect™ Wireless Cable Modem Gateway The EZ Connect™ Wireless Cable Modem Gateway is the perfect all in one solution, for the home or business environment. This full-featured device has: • An approved DOCSIS 1.1 and 2.0 Cable modem • Advanced SPI Firewall Gateway • High-speed 54 Mbps 802.11g Wireless Access Point • Comprehensive LEDs for network status and troubleshooting • Reset Button • 4 – 10/100 Mbps Auto-Sensing LAN ports with Auto-MDI MDIX feature • 1 – USB 1.1 LAN Port for PC connectivity NOTE: Cable modems provide up to 38 Mbps downstream and 10 Mbps upstream. However, you should note that the actual rate provided by specific service providers may vary dramatically from these upper limits. LED Indicators The Gateway includes LED indicators on the front panel that simplify installation and network troubleshooting. The Gateway includes LED indicators on the front panel that simplify installation and network troubleshooting. LABEL LED COLOR ON FLASHING OFF Power Green Power is supplied to the Gateway N/A Power is not supplied to the Gateway Diag Amber System Failure. Reboot Gateway N/A Normal Operation Cable Green Successfully connected to cable network Attempting to connect to network N/A Traffic Green Cable Modem has finished CMTS registration Attempting to register with CMTS N/A WLAN Green Good Wireless Link Data transmitting No Wireless Link LAN (1-4) Green Connected at 10 or 100 Mbps Data transmitting No Ethernet link detected USB Green USB port connected Data transmitting No USB link detected R…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

RevNoRevision noteSignatureDate 1 Checked 23456 123456 A B C D A B C D Project: Part Name: Part Number Description: Version Dwg No: Material: Coating: Date: Designed by Checked by Approve by-date 2008/01/16 1A FCC Label Daisy Wang Model:SMC8014WG US LISTED I.T.E. E140523 Input: 12Vdc , 1A 16mm 6.5mm 8.5mm 10.0mm 45.0mm 25.0mm FCC ID: U4P-1350002 番 消銀龍 5.0mm 8.0mm Model:SMC8014WG US LISTED I.T.E. E140523 Input: 12Vdc , 1A FCC ID: U4P-1350002 50 *實際樣式，請參照樣品 Scale: 1:1 8010400869N0

FCC ID: U4P-1350002 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15

Report No.: SA961130H07 1 RF EXPOSURE REPORT REPORT NO.: SA961130H07 MODEL NO.: SMC8014W-G, SMC8014WG, SMC8014WG-RES, SMC8014WG-TWC, SMC8014WG-BIZ, SMC8014WG-COX, SMC8014WG-TES, SMC8014WG-RRR ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: HitronTechnologies ADDRESS: NO. 1-8, LISING 1ST RD., HSINCHU SCIENCE PARK, HSINCHU, 300, TAIWAN. ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan, R.O.C. Report No.: SA961130H07 2 RF Exposure Measurement 1. Introduction In this document, we try to prove the safety of radiation harmfulness to the human body for our product. The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The Gain of the antenna used in this product is measured in a Fully Anechoic Chamber (FAC) calibrated for antenna measurement in ADT, and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis transmission formula is a far field assumption, the calculated result of that is an over-prediction for near field power density. We will take that as the worst case to specify the safety range. 2. RF Exposure Limit According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) (A)Limits For Occupational / Control Exposures 300-1500 ... ... F/300 6 1500-100,000 ... ... 5 6 (B)Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 6 1500-100,000 ... ... 1.0 30 F = Frequency in MHz Report No.: SA961130H07 3 3. Friis Formula Friis transmission formula : Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1 mW/cm 2 . If we know the maximum Gain of the antenna and the total power input to the antenna, through the calculation, we will know the MPE value at distance 20cm. Ref. : David K. Cheng, Field and Wave Electromagnetics, Second Edition, Page 640, Eq. (11-133). 4. EUT Operating condition The software provided by client enabled the EUT to transmit and receive data at specific channel frequencies individually. 5. Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. Warning statement to the user for keeping at least 20cm or more separation distance with the antenna should be included in users manual. So, this device is classified as Mobile Device Report No.: SA961130H07 4 6. Test Results 6.1 Antenna Gain The maximum Gain measured in Fully Anechoic Chamber is 3dBi or 1.9953 (numeric) 6.2 Output Power Into Antenna & RF Exposure value at distance 20cm: For Part 802.11b: Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 1 2412 69.502 0.028 1.0 6 2437 95.499 0.038 1.0 11 2462 70.469 0.028 1.0 For Part 802.11g: Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 1 2412 63.096 0.025 1.0 6 2437 165.959 0.066 1.0 11 2462 67.920 0.027 1.0

Report No.: RF961130H07 1 Report Format Version 2.0.6 FCC TEST REPORT REPORT NO.: RF961130H07 MODEL NO.: SMC8014W-G, SMC8014WG, SMC8014WG-RES, SMC8014WG-TWC, SMC8014WG-BIZ, SMC8014WG-COX, SMC8014WG-TES, SMC8014WG-RRR RECEIVED: Dec. 11, 2007 TESTED: Dec. 21, 2007 to Jan. 03, 2008 ISSUED: Jan. 09, 2008 APPLICANT: HitronTechnologies ADDRESS: NO. 1-8, LISING 1ST RD., HSINCHU SCIENCE PARK, HSINCHU, 300, TAIWAN. ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan, R.O.C. This test report consists of 66 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. No. 2177-01 Report No.: RF961130H07 2 Report Format Version 2.0.6 Table of Contents 1 CERTIFICATION...........................................................................................4 2 SUMMARY OF TEST RESULTS...................................................................5 2.1 MEASUREMENT UNCERTAINTY.................................................................5 3 GENERAL INFORMATION............................................................................6 3.1 GENERAL DESCRIPTION OF EUT..............................................................6 3.2 DESCRIPTION OF TEST MODES................................................................8 3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL:................9 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS.............................11 3.5 DESCRIPTION OF SUPPORT UNITS........................................................12 3.6 CONFIGURATION OF SYSTEM UNDER TEST.........................................13 4 TEST TYPES AND RESULTS.....................................................................14 4.1 CONDUCTED EMISSION MEASUREMENT..............................................14 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................14 4.1.2 TEST INSTRUMENTS.................................................................................14 4.1.3 TEST PROCEDURES.................................................................................15 4.1.4 TEST SETUP..............................................................................................15 4.1.5 EUT OPERATING CONDITIONS................................................................16 4.1.6 TEST RESULTS..........................................................................................17 4.2 RADIATED EMISSION MEASUREMENT...................................................19 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.................................19 4.2.2 TEST INSTRUMENTS.................................................................................20 4.2.3 TEST PROCEDURES.................................................................................21 4.2.4 TEST SETUP..............................................................................................22 4.2.5 EUT OPERATING CONDITIONS................................................................22 4.2.6 TEST RESULTS..........................................................................................23 4.2.7 TEST RESULTS..........................................................................................24 4.2.8 TEST RESULTS..........................................................................................31 4.3 6DB BANDWIDTH MEASUREMENT..........................................................38 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT........................................38 4.3.2 TEST INSTRUMENTS.................................................................................38 4.3.3 TEST PROCEDURE....................................................................................39 4.3.4 TEST SETUP..............................................................................................39 4.3.5 EUT OPERATING CONDITIONS................................................................39 4.3.6 TEST RESULTS..........................................................................................40 4.3.7 TEST RESULTS-OFDM..............................................................................43 4.4 MAXIMUM PEAK OUTPUT POWER...........................................................46 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT...........46 4.4.2 TEST INSTRUMENTS.................................................................................46 4.4.3 TEST PROCEDURES.................................................................................47 4.4.4 TEST SETUP..............................................................................................47 4.4.5 EUT OPERATING CONDITIONS................................................................47 4.4.6 TEST RESULTS..........................................................................................48 4.4.7 TEST RESULTS..........................................................................................49 4.5 POWER SPECTRAL DENSITY MEASUREMENT......................................50 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT....................50 Report No.: RF961130H07 3 Report Format Version 2.0.6 4.5.2 TEST INSTRUMENTS.................................................................................50 4.5.3 TEST PROCEDURE....................................................................................51 4.5.4 TEST SETUP..............................................................................................51 4.5.5 EUT OPERATING CONDITIONS................................................................51 4.5.6 TEST RESULTS.........................................................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST