U5X-RE202Security Transmitter, 345MHz

RE202_Honeywell-Compat_Pencil_DWS_Instructions.doc Page 1 of 3 28-Jul-11 www.ResolutionProducts.com Wireless Security Solutions RE202 Honeywell-Compatible Pencil Door / Window Features • Senses opening or separation. Narrow mounting loca tions. • ½ width of competitive products. Great for casemen ts! • Magnet and Internal reed switch operation. • Magnet can mount beside or over sensor housing. • Strong, reliable RF signal. • 8-10 year battery life on 2-AAA batteries. Key Instructions • Battery “+” faces towards white “+” on circuit boar d. • Install batteries: rear batt – tail in first, front battery – nose in first. • Board goes in and out of housing without batteries (not with). • Reed switch is at the top of the housing, near the push button hole. • Reed switch = Loop 2 • (Inserting battery will send a Loop 4 Tamper, but S ensor does not actually have a tamper) • Enrolling:
Place Panel in RF Learning mode.
Input Type = RF
Lynx *56 “E I” mode: To enroll any particular loop: cause the loop to fa ult... restore... (panel should beep to indicate ID capture) ... fault... restore... [panel will confirm enrollment].
Vista *56 “10 INPUT S/N: L” mode: Transmit two open/close sequences (using magnet). Press * (to check for duplicate serial/loop number) . Press * (to continue to confirmation screen). Press * if you wish to skip confirmation; or “Yes” and activate the loop to confirm. RE202_Honeywell-Compat_Pencil_DWS_Instructions.doc Page 2 of 3 28-Jul-11 www.ResolutionProducts.com Operation • Magnetic reed switch: Alarm, when... ... magnet is pulled away from reed switch. • Supervisories, every hour. Specifications Magnet trip distance: 0.75 inch nominal Mounting hardware: # 4 or #6 screws Replacement Battery: 2 AAA Alkaline Temperature Range: 0F to 120F Housing dimensions: 4 x 0.6 x 0.9 inches. Specifications subject to change without notice. Internal Picture ID Barcode Wall mount plate Battery Positive Magnet position Reed Switch RE202_Honeywell-Compat_Pencil_DWS_Instructions.doc Page 3 of 3 28-Jul-11 www.ResolutionProducts.com Notices “GE”, “Honeywell”, and “DSC” are trademarks owned b y General Electric Company, Honeywell International Inc., and Tyco Safety Products Canada LTD, respectively. Resolution Products, Inc. products will function wi th one of either GE, DSC or Honeywell systems. However, no Resolution product is produce d by, endorsed by, nor is officially associated with GE, Honeywell or DSC. Resolution recommends verifying proper enrollment and operation, per control panel installation instr uctions, at installation. Warranty Resolution Products, Inc. will replace products tha t are defective in their first year. FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference that may b e received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user's authority to operate this equipment . FCC ID: U5X-RE202 IC Notice This device complies with Industry Canada license-e xempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, includ ing interference that may cause undesired operation of the device. Cet appareil est conforme avec d’Industrie Canada R SS standard exempts de licence. Son fonctionnement est soumis aux deux conditions s uivantes: 1. Ce dispositif ne peut causer des interférences, et 2. Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dis positif. IC: 8310A-RE202

July 28, 2011 RE: Confidentiality Request for U5X-RE202/8310A-RE202 To Whom It May Concern: Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality RequestedExhibit Short Term PermanentBlock Diagrams Short TermExternal Photos Short Term Permanent* 1 Internal Photos Short Term PermanentOperation Description/Theory of Operation Short Term PermanentParts List & Placement/BOM Short Term PermanentTune-Up Procedure Short Term PermanentSchematics Short TermTest Setup Photos Short Term Permanent*User’s Manual *Note: ______(Insert Explanation as Necessary)______ Resolution Products, Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” of ___(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By:__________________________ Paul Saldin, Vice President (Signature/Title 3 )(Print name) 2 - Please refer to http://atcb.com/publicdocs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Exhibit A RE202 External Photos

Exhibit B RE202 ID Label Photo

Exhibit C RE202 Internal Photos

Resolution Products, Inc. Security Transmitter FCC ID: U5X-RE202 Certification Test Report July 28, 2011 U5X-RE202 Resolution Products, Inc.07/28/11Page 1 of 9 Test Report 226 Locust Street, Suite 4 Hudson, WI 54016 Contents 1. Introduction.................................................................................................................................................................3 2. Statement of Compliance............................................................................................................................................3 2.1. FCC Part 2 §2.907................................................................................................................................................3 2.2. FCC Part 2 §2.911................................................................................................................................................3 2.3. FCC Part 2 §2.913................................................................................................................................................3 2.4. FCC Part 2 §2.915................................................................................................................................................3 2.5. FCC Part 2 §2.925................................................................................................................................................3 2.6. FCC Part 2 §2.943, 2.945....................................................................................................................................3 2.7. FCC Part 2 §2.947................................................................................................................................................3 2.8. FCC Part 2 §2.948................................................................................................................................................4 2.9. FCC Part 2 §2.1033..............................................................................................................................................4 3. Discussion of Laboratory Measurements and Rules Compliance...............................................................................5 3.1. FCC Part 15 §15.231(a)(1)..................................................................................................................................5 3.2. FCC Part 15 §15.231(a)(3)..................................................................................................................................5 3.3. FCC Part 15 §15.231(a)(4)..................................................................................................................................6 3.4. FCC Part 15 §15.231(a)(5)..................................................................................................................................6 3.5. FCC Part 15 §15.231(b).......................................................................................................................................6 3.5.1. Raw Field Strength Limits............................................................................................................................6 3.5.2. Duty Cycle Correction Factor and Resulting Limits.....................................................................................6 3.5.3. Measured Radiated Field Strength Data.......................................................................................................7 3.6. FCC Part 15 §15.231(c).......................................................................................................................................8 U5X-RE202 Resolution Products, Inc.07/28/11Page 2 of 9 Test Report 226 Locust Street, Suite 4 Hudson, WI 54016 1.Introduction This device is a small sensor for use in a wireless security system. The unit is powered by a 3V lithium battery. The device measures 1 x 0.5 x 4” and weighs approximately 2 ounces. The device transmits transmission packets for the purpose of alerting a security system. A microcontroller monitors the input for activations and transmits four data packets when valid activations are detected. Input is provided by a reed switch. In the absence of external activations, a set of three supervision transmissions is sent once per hour. Certification is requested under FCC Rules, Part 15, Subpart C, Paragraph 15.231. 2.Statement of Compliance Specific sections of FCC Rules Part 2 that require information or listing are given below. 2.1.FCC Part 2 §2.907 This is an application for certification of original equipment 2.2.FCC Part 2 §2.911 a)This application has been filed electronically using form 731. b)All required information has been supplied in this application and its attachments. c)This application has been electronically signed by an officer of Resolution Products, Inc. d)The technical test data has been signed by the agency performing the testing. e)Signature supplied in appropriate block on form 731. f)Processing fee has been paid. g)Signatures have been supplied electronically. 2.3.FCC Part 2 §2.913 a)This application has been filed electronically. b)Appropriate fees have been filed electronically. c)Equipment samples shall be supplied as requested. 2.4.FCC Part 2 §2.915 We are requesting a grant of certification. This application shows compliance with the technical standards. 2.5.FCC Part 2 §2.925 A label shall be affixed to each piece of equipment, showing the FCC identifier. The label shall read “FCC ID: U5X- RE202”. See Exhibit B for a photograph showing the label and location on the device. 2.6.FCC Part 2 §2.943, 2.945 Sample production equipment shall be submitted to the FCC upon request. 2.7.FCC Part 2 §2.947 a)Measurement procedure follows ANSI C63.4: 2009. b)A description of utilized test equipment is contained in the report. U5X-RE202 Resolution Products, Inc.07/28/11Page 3 of 9 Test Report 226 Locust Street, Suite 4 Hudson, WI 54016 2.8.FCC Part 2 §2.948 Radiated measurements were…

Text truncated - open the document above for the full version.

   
          !" #$!%$&#' #   ()*  +)!$,&-.$/0",1. /"01$2$ #$*  ()*  $&),3#")/4/5"/$$*"/5    %6.*)7$0#839:$*;;<;<  %$&#4/5"/$$*-' /"$,= ,#>$,, ?@ABCDEFCGHIJKFGLDCDECFMNODMPDQODEGAKRNSSPTAG@FNGG@DRNSSTCAGGDKIEECFUISFRV@DAK?DO@ WILFCIGFCADBPXKOYIKMVDBFSNGAFKZK[AKDDCAK[Y?DBGCDBNSGBCDSIGDFKSJGFG@DAGDHGDBGDMY ?@DBDGDBGBICDIOOCDMAGDMIKMHDDGG@DCD\NACDHDKGBFRX]^_XZ`abcdeIBUDCARADMLJfg]Xhf]i gIGAFKISfOOCDMAGIGAFKjFICM_f`Wf]]YVDRDCGFODCGARAOIGDIKMBOFEDFRIOOCDMAGIGAFKf?hakkeY

           !  "   # $%&'()*    +*,$-#  & ,$.
"))
 
 /" 0,1,1  232452672 89:;9<=:>?@;AA;BCA>D=A<>E9<9>F>GHH>I;@;<A>J>K@>E;A<9CL=> M N=CL;O>KPQ>RST>F>SBU;TBC<9O>N=9V>  GU=WX=CLY> ZRST[> SBU;TBC<9O>N=9V> Z:\X][> ^;<=>HBUU=L<;BC>G9L<BU> Z:\J@[> HBUU=L<=:>N=9V> Z:\X]J@[> I;@;<> Z:\X]J@[> R9U_;C> Z:\[> %. $,`a$%``, 1-a1$ 1 1.a-,, --a$. $. ,a,..-- -%a$ $` .$,,$. -%a,- $-,. 1-.%%.$ --a,, ,-a$$ ..--a%$` ,%$.%%1a% %%.--a,` ,-%-a. %-$-%a,1 $.%.$a, %$1--a.% %..-.a,1 .%--a,,-   N=CL;O>KPQ>RST>F>]=U<;L9O>N=9V>  GU=WX=CLY> ZRST[> ]=U<;L9O>N=9V> Z:\X][> ^;<=>HBUU=L<;BC>G9L<BU> Z:\J@[> HBUU=L<=:>N=9V> Z:\X]J@[> I;@;<> Z:\X]J@[> R9U_;C> Z:\[> %. $%.a$% `11 1-a-% 1 .1`a-,., --a,%- $. .,1a,..% -%a, $` %1,$.$- -%a,, $-,. ..%%$ --a ,-a$$,,--a%.$ ,%$.%$,a%%`--a. ,-%-%a.%1-%a,-$ $.%`a,%--a- %..a,1.$--a,%,   

           !  "   # $%&'()*    +*,$-#  & ,$.
"))
 
 /" 0,1,1  232452672     89:;<=>?@A>BCD>EFG:H>I<9J>  

           !  "   # $%&'()*    +*,$-#  & ,$.
"))
 
 /" 0,1,1  232452632     789:;<=>?@=ABC=DE:F=G;8H=    

           !  "   # $%&'()*    +*,$-#  & ,$.
"))
 
 /" 0,1,1  2342562342 7 89:;7<=>?9@A=97  /  B

/     
/  
C   


  " 

 D   
"   
/  / E/F" *(# %,G$,H

/  /    

 D   $ %/ 
 C  

I       
/ E///  B J

F   D  /  /    "  F   *     
 B$ F B B K
$!F       
 B$!F B  B K   
 K  $!F
D  
    D    
 /   

     
  LM87NO:P>:O;O>Q7 
C   "       / B   " "   89:;7LRAOPS9Q;7TO:;7  UV=?>@97WVQAXV?;A=9=7W>@9Y7<V=;78ZP97 [9=OVY7 \AS]9=7 ^VYO]=V;O>Q7 NA97 1$.$  _   `#a$.a,%a `# & ,b(*$)$-)1 1$.$-  _   `#a$.aa `# & c(*$)$-)1 1$.!d e#%a$,a%$a . */"B $a,fF J  ()*)%)$ 1-1$
J$$$J J     g!Fh,!Fi ()*$,)$,)$ 1$,$.   G.1! #" /*  F  g1Fa$,GfFi G,*$%%$),)1 1--,!j$$a,  *   g,a%fFi 1G%a$%%)$%)$ 11.

 a$% j*#$  /"B  %J g!Fh,fFi $%)$)$ 11$   G.%,* !D  &#   g1`Fh.fFi ,.*$.1)G)$  ( / )' &$.,$g i)/  k 89:;7<9=:>QQ9Yl7  ' _J  F  e,1,1   #  ' jB  k

U5X-RE202 8310A-RE202 Test Setup Photos