U726950Laser Imager

Publication No. AB3145_en 2014-06-09 Safety Manual All rights reserved. No part of this manual may be reproduced or copied in any form by any mean graphic, electronic, or mechanical, including photocopying, typing, or information retrieval systems without written permission. AB3145_en | 2014-06-09i Contents Safety and Related Information Safety, Warnings, and Cautions....................................................................................................... 1 Safety Labels ............................................................................................................................... 4 System Labels .............................................................................................................................. 5 Safety and Health Compliance ........................................................................................................ 8 Safety Standards ......................................................................................................................... 8 EMC Standards ............................................................................................................................ 8 EU Directives ............................................................................................................................. 16 Publication History AB3145_en | 2014-06-091 Safety and Related Information The information contained herein is based on the experience and knowledge relating to the subject matter gained by the manufacturer prior to publication. No patent license is granted by this information. The manufacturer reserves the right to change this information without notice and makes no warranty, express or implied, with respect to this information. The manufacturer shall not be liable for any loss or damage, including consequential or special damages, resulting from the use of this information, even if loss or damage is caused by the manufacturer’s negligence or other fault. For product specifications, see the User Manual. Safety, Warnings, and Cautions Please read and understand all instructions before using this product. DANGER This equipment is operated with hazardous voltage which can shock, burn, or cause death. •Remove wall plug before servicing equipment. Never pull on cord to remove from outlet. Grasp plug and pull to disconnect. Do not attempt to service or repair the laser imager yourself to avoid exposure to dangerous voltage, laser beam, or other danger. Always call an authorized service provider for any service or repair. •Do not operate equipment with a damaged power cord. •Do not use an extension cord to power this equipment. •Do not operate equipment with any of the safety interlocks overridden. •Position the power cord so it will not be tripped over or pulled. •Connect this equipment to a grounded wall outlet. •A power cord is provided with this equipment. All countries must use an agency-approved power cord with plug type suitable for the country of use. Contact a qualified dealer for help. •Do not operate equipment with the covers open. DANGER This equipment contains moving parts that may be accessible to the user. Loose clothing, jewelry or long hair may cause personal injury or damage to the equipment. Safety, Warnings, and Cautions 2AB3145_en | 2014-06-09 DANGER This equipment is not contained in a sealed cabinet. Do not use this equipment in locations where it can come in contact with liquids, including body fluids. Caution The operator must not touch or have contact simultaneously with the patient and the laser imaging system. Caution Do not use a cell phone within 2.0 m (6.6 ft) of a laser imager. This proximity includes any imager behind a wall adjacent to your location. Caution Do not use a microwave oven within 4.0 m (13.1ft) of a laser imager. Electromagnetic radiation from a microwave oven is only an issue if after the oven door is closed and latched, the seal does not maintain an electromagnetic tight fit between the oven door and oven main housing. Determining if the seal has an electromagnetic tight fit requires special detection equipment. Caution Do not use in the presence of flammable anesthetics, oxygen, or nitrous oxide. This equipment does not have a gas-sealed electronics enclosure and could ignite any flammable or explosive gases present in its environment. Caution This equipment uses a DICOM network port, and is intended to connect to other medical devices over the network. It is not intended to be connected directly to other medical devices. Only qualified personnel may provide installation and service. Caution This device should not be used in close contact with MRI devices, due to possible very high magnetic fields near an MRI unit. The magnetic field in the area where this equipment is installed must be less than 50 G. Caution Do not substitute or modify any part of this equipment. Safety, Warnings, and Cautions AB3145_en | 2014-06-093 Caution This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the User Guide and other User Documentation, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution Changes or modifications not expressly approved by the party responsible…

Text truncated - open the document above for the full version.

Carestream CarestreamHealthInc. 150 VeronaStreet Rochester,NY 14608 Date28/04/2014 TUV SUD BABTTCB OctagonHouse, SegensworthRoad, Fareham, Hampshire, P0155RL Dear Sir or Madam, We, CarestreamHealth,Inc., herebyauthorize Joel Schneiderand SusanRupp TUV SUD America,Inc., 19333Wild MountainRd. TaylorFalls,MN 55084 Ph. 651-638-0297 to act as our agentin all mattersrelatingto applicationsfor equipmentauthorhation,including the signingof all documentsrelatingto thesematters.II This authorizationexpireson 28/10/2014. Sincerely, CompanyOfficer: TelephoneNumber: Email: RonaldL. Cain 585-627-8321 [email protected]

Front Back Top Bottom Right Side Left Side

1 0.5 0.26 6950 ERIC VRAA 2013-12-16 2013-12-16 AB2655 A B C D 1234 D C B A 1234 MM (INCH) 25.4 MM = 1 INCH TOLERANCES EXCEPT AS NOTED MM 0 ± .0 ± .00 ± ANGLES ± MATERIAL FINISH INCHES .0 ± .00 ± .000± DATE DATE DRFT ENG INTERPRET PER ASME Y14.5M-1994 THIRD ANGLE PROJECTION TITLE MODEL FSCM NO. SIZE DRAWING NO. DO NOT SCALE DRAWING REV SHT 11 OF DRA WING NO. OAKDALE, MN CARESTREAM HEALTH, INC. 0.5 SEENOTES SEENOTES AB2655 ERIC VRAA B LABEL- FCC STATEMENT, 6950 COMPLIES WITH 21 CFR 1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 FCC ID: U726950 7027B-6950 French Can. ARTWORK FORAB2655 DIELINE FORAB2655 AB2655.B 73 47.4 PMS White PMS Black DIE LINE LABELNOTES: COLORS ARE INDICATED AS PANTONE (PMS) VALUES, PROCESS COLORS MAY BE USED WITH PRIOR WRITTEN APPROVAL, SIGNATURE, AND PRINTED SAMPLES. NOTES: 1.MATERIAL: ITEM 1: 0.254 MM HIGH GLOSS POLYCARBONATE MANUFACTURER'S PART NUMBER: LEXAN 8010 COLOR: OPTICALLY CLEAR RAW MATERIALMANUFACTURER MUSTBE: SABIC INNOVATIVE PLASTICS WWW.GEPLASTICS.COM ITEM 2: ACRYLIC ADHESIVE WITH RELEASE LINER MANUFACTURER'S PART NUMBER: 3M 468MP RAW MATERIALMANUFACTURER MUSTBE: 3M INDUSTRIALADHESIVES AND TAPE WWW.3M.COM 3.LABELTO BE MADE PER ELECTRONIC ARTWORK SUPPLIED BY CARESTREAM HEALTH INC. 4. SUPPLIER ARTWORK TO BE APPROVED BYCARESTREAM HEALTH INC. OAKDALE ENGINEERING PRIOR TO PRINTING. 5.INSPECTION REQUIREMENTS, IF SHOWN ON DRAWING: A INDICATES PRIMARY INSPECTION DIMENSION. B. GEOMETRIC TOLERANCES ARE PRIMARY INSPECTION ATTRIBUTES. C. REFERENCE DIMENSIONS ARE ENCLOSED IN PARENTHESES ( ). DO NOT INSPECTREFERENCE DIMENSIONS. 6. SUPPLIER MUSTUSE ULRECOGNIZED PRINTING PROCESS PER UL STANDARD 969 (MARKING AND LABELING SYSTEMS [PGDQ2]). 7. CERTIFICATION OF COMPLIANCE: SUPPLIER MUSTINDICATE COMPLIANCE TO ULSTANDARD 969 AND THE FOLLOWING MUSTBE INCLUDED WITH SHIPMENT: A. ITEM 1 SUPPLIER'S NAME AND/OR TRADEMARK. B. D. CARESTREAM HEALTH INC. PART NUMBER AND REVISION. E . DATE OF PRODUCTION. F . PURCHASE ORDER NUMBER AND QUANTITY. G . LOTNUMBER. ITEM 1 MATERIAL GRADE DESIGNATION C. UL FILE NUMBER OF APPROVED PGDQ2 LABEL MANUFACTURER. REV ECO REVISION RECORD DESCRIPTION DESIGNERDATE ERIC VRAA A 2013-12-16RELEASE 1.5 radius 4 places THIS IS AN UNPUBLISHED WORK THAT IS CARESTREAM HEALTH, INCORPORATED. RESTRICTED INFORMATION. DISCLOSURE, USE OR REPRODUCTION WITHOUT THE WRITTEN AUTHORIZATION OF CARESTREAM HEALTH, INCORPORATED IS PROHIBITED. IF PUBLICATION OCCURS, THE FOLLOWING NOTICE APPLIES: COPYRIGHT (c) 2014, CARESTREAM HEALTH, INCORPORATED. ALL RIGHTS RESERVED. ALTERNATE: GENERAL ELECTRIC LEXAN 8B35, 0.254 MIL, MATTE VELVET, POLYCARBONATE ALTERNATE: 467MP 2.ENVIRONMENTAL SPECIFICATIONS: SUPPLIER MUST PROVIDE IPC-1752A DECLARATION THAT ALL COMPONENT MATERIALS ARE CERTIFIED RoHS - RESTRICTED MATERIALS COMPLIANT. CARESTREAM HEALTH, INC. MODEL: DRYVIEW 6950 ERIC VRAA B 2014-06-05 ADDED COMPANY NAME AND MODEL. UPDATED THE INDUSTRY CANADA INFORMATION. REMOVED REV FROM THE ARTWORK AND DIELINE NOTES. THIS CLASS A DIGITAL APPARATUS COMPLIES WITH: CAN ICES-3 (B)/NMB-3(B) FCC: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES, OPEERATION IS SUPJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION CET APPAREIL NUMERIQUE DE CLASSE A EST CONFORME AUX NORMES SUIVANTES: CAN ICES-3 (B) /NMB-3 (B) ECN004860 ,

1 0.5 0.26 TX65 ERIC VRAA 2013-12-16 2013-12-16 AB2942 A B C D 1234 D C B A 1234 MM (INCH) 25.4 MM = 1 INCH TOLERANCES EXCEPT AS NOTED MM 0 ± .0 ± .00 ± ANGLES ± MATERIAL FINISH INCHES .0 ± .00 ± .000± DATE DATE DRFT ENG INTERPRET PER ASME Y14.5M-1994 THIRD ANGLE PROJECTION TITLE MODEL FSCM NO. SIZE DRAWING NO. DO NOT SCALE DRAWING REV SHT 11 OF DRA WING NO. OAKDALE, MN CARESTREAM HEALTH, INC. 0.5 SEENOTES SEENOTES AB2942 ERIC VRAA B LABEL- FCC STATEMENT, TX65 FCC ID: U726950 ARTWORK FORAB2942 DIELINE FORAB2942 AB2942.B 73 47.4 PMS White PMS Black DIE LINE LABELNOTES: COLORS ARE INDICATED AS PANTONE (PMS) VALUES, PROCESS COLORS MAY BE USED WITH PRIOR WRITTEN APPROVAL, SIGNATURE, AND PRINTED SAMPLES. NOTES: 1.MATERIAL: ITEM 1: 0.254 MM HIGH GLOSS POLYCARBONATE MANUFACTURER'S PART NUMBER: LEXAN 8010 COLOR: OPTICALLY CLEAR RAW MATERIALMANUFACTURER MUSTBE: SABIC INNOVATIVE PLASTICS WWW.GEPLASTICS.COM ITEM 2: ACRYLIC ADHESIVE WITH RELEASE LINER MANUFACTURER'S PART NUMBER: 3M 468MP RAW MATERIALMANUFACTURER MUSTBE: 3M INDUSTRIALADHESIVES AND TAPE WWW.3M.COM 3.LABELTO BE MADE PER ELECTRONIC ARTWORK SUPPLIED BY CARESTREAM HEALTH INC. 4. SUPPLIER ARTWORK TO BE APPROVED BYCARESTREAM HEALTH INC. OAKDALE ENGINEERING PRIOR TO PRINTING. 5.INSPECTION REQUIREMENTS, IF SHOWN ON DRAWING: A INDICATES PRIMARY INSPECTION DIMENSION. B. GEOMETRIC TOLERANCES ARE PRIMARY INSPECTION ATTRIBUTES. C. REFERENCE DIMENSIONS ARE ENCLOSED IN PARENTHESES ( ). DO NOT INSPECTREFERENCE DIMENSIONS. 6. SUPPLIER MUSTUSE ULRECOGNIZED PRINTING PROCESS PER UL STANDARD 969 (MARKING AND LABELING SYSTEMS [PGDQ2]). 7. CERTIFICATION OF COMPLIANCE: SUPPLIER MUSTINDICATE COMPLIANCE TO ULSTANDARD 969 AND THE FOLLOWING MUSTBE INCLUDED WITH SHIPMENT: A. ITEM 1 SUPPLIER'S NAME AND/OR TRADEMARK. B. D. CARESTREAM HEALTH INC. PART NUMBER AND REVISION. E . DATE OF PRODUCTION. F . PURCHASE ORDER NUMBER AND QUANTITY. G . LOTNUMBER. ITEM 1 MATERIAL GRADE DESIGNATION C. UL FILE NUMBER OF APPROVED PGDQ2 LABEL MANUFACTURER. REV ECO REVISION RECORD DESCRIPTION DESIGNERDATE ERIC VRAA A 2014-06-18RELEASE 1.5 radius 4 places THIS IS AN UNPUBLISHED WORK THAT IS CARESTREAM HEALTH, INCORPORATED. RESTRICTED INFORMATION. DISCLOSURE, USE OR REPRODUCTION WITHOUT THE WRITTEN AUTHORIZATION OF CARESTREAM HEALTH, INCORPORATED IS PROHIBITED. IF PUBLICATION OCCURS, THE FOLLOWING NOTICE APPLIES: COPYRIGHT (c) 2014, CARESTREAM HEALTH, INCORPORATED. ALL RIGHTS RESERVED. ALTERNATE: GENERAL ELECTRIC LEXAN 8B35, 0.254 MIL, MATTE VELVET, POLYCARBONATE ALTERNATE: 467MP 2.ENVIRONMENTAL SPECIFICATIONS: SUPPLIER MUST PROVIDE IPC-1752A DECLARATION THAT ALL COMPONENT MATERIALS ARE CERTIFIED RoHS - RESTRICTED MATERIALS COMPLIANT. CARESTREAM HEALTH, INC. MODEL: TRIMAX TX65 FCC: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES, OPEERATION IS SUPJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION COMPLIES WITH 21 CFR 1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 ERIC VRAA B 2014-06-25FCC ID was U72TX65.

Label location For DRYVIEW 6950 label and TRIMAX TR65 Label

Densitometer light source back Densitometer light source Front RF Tag Back RF Tag Front Densitometer Receiver Back Densitometer Receiver Front DRE Back DRE Front Data Path Back Data Path Front Laser Driver Back Laser Driver Front MCS Back MCS Front Sort Back Sorter Front User Interface Back User Interface Front Start of scan detector back Start of scan detector back front

206 BH CONNECTOR Disconnectable Crimp style connectors 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Crimp Emboss Tape Specifications ––––––––––––––––––– • Current rating:1.0A AC, DC (AWG#22) • Voltage rating:600V AC, DC • Temperature range: -25 ̊C to +85 ̊C (including temperature rise in applying electrical current) • Contact resistance: Initial value/10m Ωmax. After environmental testing/20m Ωmax. • Insulation resistance:1,000M Ωmin. • Withstanding voltage:1,800V AC/minute • Applicable wire: AWG #28 to #22 * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards –––––––––––––––––––––– 0 Recognized E60389 1 Certified LR20812 HJST 2 1 3 HJST Low profile connectors with high withstanding voltage, designed for connecting liquid crystal display back light lamps to their starters. Features –––––––––––––––––––––––– • Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). • SMT configuration Shrouded headers are SMT style, suited for high density mounting. The headers feature reinforcing solder tabs to prevent lifting of the header during mating and unmating. • Applicable to special wires Its crimp style contact can be inserted into the housing with little force, thus making them suitable for use with flexible wires such as those insulated with silicone rubber. • Headers with locating bosses Headers with locating bosses are also available at option. • Housing lock also serves as polarizing device The housing lock, which is also designed to be a polarizing device, prevents both misinsertion and accidental disengagement due to vibration or shock. 207 Contact ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 7.35(.289) 1.5(.059) 3.1(.122) 1.5(.059) 2.2(.089) 1.6(.063) Model No. Material and Finish mm 2 AWG # Q'ty / reel Applicable wire SBH-001T-P0.5 0.08 to 0.3328 to 221.6 to 2.4(.063 to .094) Phosphor bronze, tin-plated 4,000 Insulation O.D. min(in.) Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––– H JST B A 3.2(.126) 8.8(.346) 5.1(.201) 2.2 (.087) 4.0 (.157) H JST 21.8(.858) 3.2(.126) 8.8(.346) 5.1(.201) 2.2 (.087) 4.0 (.157) 16.0(.630) 18.4(.724) 19.6(.772) Material Circuits 4.0(.157) 8.0(.315) 8.0(.315) 12.0(.472) 4.0(.157) 4.0(.157) 4.0(.157) 4.0(.157) 2 3 4 5 BHR-02VS-1 BHR-03VS-1 BHR-02(8.0)VS-1N BHR-04VS-1 BHR-03VS-1 BHR-03(4-3)VS-1N BHR-04VS-1 BHR-05VS-1 Nylon 66, UL94V-0, natural (white) Pitch mm(in.) A B Q'ty / bag Dimensions mm(in.) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 4.0(.157) 8.0(.315) 8.0(.315) 12.0(.472) 8.0(.315) 12.0(.472) 12.0(.472) 16.0(.630) 9.8(.386) 13.8(.543) 13.8(.543) 17.8(.701) 13.8(.543) 17.8(.701) 17.8(.701) 21.8(.858) Model No. Note: Wire conductors should be tin-plated annealed copper strands. Note: 1. BHR-02(8.0)VS-1N: 2 circuits 8.0mm(.315") pitch plugged up. 2. BHR-03(4-3)VS-1N: 4 circuits 4.0mm(.157") pitch header with circuit No.3 plugged up. BH CONNECTOR 2 to 4 circuits 5 circuits Note: The applicable housing is "BHR-02(8.0)VS-1N" only. 14.0(.551) 10.4(.409) 8.0(.315) 3.2(.126) 12.0(.472) 7.1(.280) [6.85(.270)] 1.0(.039) [3.2(.126)] 3.0 (.118) CircuitsModel No. Material and Finish 2S02(8.0)B-BHS Pitch mm(in.) Post: Copper alloy, copper-undercoated, tin/lead-plated Wafer: Polyamide resin, UL94V-0, natural (ivory) Q'ty / tray 1,000 8.0(.315) 208 BH CONNECTOR SMT type shrouded header ––––––––––––––––––––––––––––––––––––––––––––––––– 4.0(.157) 3.0 (.118) 10.0(.394) 6.4(.252) 3.2(.126) 7.1(.280)1.5(.059) 14.0(.551) 10.4(.409) 8.0(.315) 3.2(.126) 12.0(.472) 7.1(.280) 1.5(.059) 5.0(.197) 3.2(.126) 14.0(.551) 10.4(.409) 8.0(.315) 7.1(.280) 1.5(.059) 12.0(.472) 18.0(.709) 14.4(.567) 3.2(.126) 4.0(.157) 7.1(.280) 1.5(.059) 14.0(.551) 10.4(.409) 8.0(.315) 3.2(.126) 7.1(.280)1.5(.059) 14.0(.551) 10.4(.409) 8.0(.315) 3.2(.126) 7.1(.280)1.5(.059) 12.0(.472) 18.0(.709) 14.4(.567) 3.2(.126) 7.1(.280)1.5(.059) 3.2(.126) 14.0(.551) 10.4(.409) 8.0(.315) 4.0(.157) 7.1(.280) 1.5(.059) 12.0(.472) 18.0(.709) 14.4(.567) 3.2(.126) 4.0(.157) 7.1(.280) 1.5(.059) 16.0(.630) 22.0(.866) 18.4(.724) 3.2(.126) 4.0(.157) 12.0(.472) No.1 7.1(.280)1.5(.059) 3.0 (.118) 3.0 (.118) 3.0 (.118) 3.0 (.118) 3.0 (.118) 3.0 (.118) 3.0 (.118) No.1 (2 circuits 4.0mm(.157")pitch)(2 circuits 8.0mm(.315")pitch) (2 circuits 8.0mm(.315")pitch with bosses) Note 1) (2 circuits 8.0mm(.315")pitch plugged up) Note 2) (2 circuits 8.0mm(.315")pitch with ribs against prying) Note 4) (2 circuits 12.0mm(.472")pitch) (3 circuits 4.0mm(.157")pitch plugged up) Note 3) (3 circuits 4.0mm(.157")pitch) (4 circuits 4.0mm(.157")pitch)(4 circuits 4.0mm(.157")pitch with post removed) Note 5) 209 BH CONNECTOR Q'ty / reel CircuitsModel No. Material and Finish 4.0(.157) 8.0(.315) Note1) 8.0(.315) Note2) 8.0(.315) Note4) 8.0(.315) 12.0(.472) 4.0(.157) Note3) 4.0(.157) 4.0(.157) Note5) 4.0(.157) 2 3 4 5 SM02(4.0)B-BHS-1-TB SM02(8.0)B-BHS-1-TB SM02(8.0)B-BHS-TB SM02(8.0)B-BHS-1N-TB SM02(8.0)B-BHS-1R-TB SM02(12)B-BHS-1-TB SM03(4.0)B-BHS-1-TB SM03(7-D1)B-BHS-1N-TB SM04(4.0)B-BHS-1-TB SM04(9-E2)B-BHS-1-TB Post: Copper alloy, copper-undercoated, tin/lead-plated Wafer: Polyamide resin, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin/lead-plated Pitch mm(in.) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 Note: 1. Header with bosses. Contact JST for other circuits headers with bosses. 2. 2 circuits 8.0mm(.315") pitch plugged up. 3. 4 circuits 4.0mm(.157") pitch header with circuit No.3 plugged up. 4. Header with ribs against prying. Contact JST for other circuits headers with ribs against prying. 5. 5 circuits 4.0mm(.157") pitch header with circuit No.3 post removed. 6. The products listed above are supplied on embossed tape. 7. Products with bosses supplied in loose piece are also available. Contact JST for details. 210 BH CONNEC…

Text truncated - open the document above for the full version.

TÜV SÜD America Inc. 19333 Wild Mountain Road Taylors Falls, MN 55084 Phone: 651-638-0297 Fax: 651-638-0298 www.tuv-sud-america.com 25 June 2014 TUV SUD BABT Octagon House, Concorde Way Segensworth Rd N, Fareham PO15 5RL Subject: SAR Evaluation Exemption Compliance information FCC KDB 447498 D01v05 Clause 4.3.1.1 SAR test exemption criteria FCC ID: U726950 Portable Exposure SAR Exemption Per FCC KDB 447498 D01 RF Exposure v05r01 Maximum e.r.p. power = 0.00001325 mW erp based on 3m field strength f(GHz) = .01356 A test separation distance of 5 mm has been applied to the SAR test exclusion calculation. [(max. power of channel, including tune‐up tolerance, mW)/(min. test separation distance, mm)] [√f (GHz)] ≤ 3.0 f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation17 The result is rounded to one decimal place for comparison [Ref: Clause 4.3.1.1] [(.00001325mW)/(5, mm)] [√.01356 (GHz)] ≤ 3.0 3.08 x 10 ‐7 ≤ 3.0 Therefore, the device meets the FCC SAR exemption requirements . Joel T Schneider Senior EMC Engineer

TÜV SÜD AMERICA INC 1775 Old Hwy 8 NW, Suite 104 New Brighton MN 55112-1891 Tel: (651) 638-0297 Fax: (651) 638-0298 Rev. 113006 TEST REPORT FCC Part 15 Subpart C Section 15.207 FCC Part 15 Subpart C Section 15.209 IC RSS-210 Issue 8 IC RSS-Gen Issue 3 MANUFACTURER'S NAME Carestream Health Incorporated 1049 W Ridge Road Rochester NY 14615 PRODUCT NAME DRYVIEW 6950 Laser Imaging System with 13.56 MHz RFID MODEL NUMBER(S) TESTED DRYVIEW 6950 SERIAL NUMBER(S) TESTED 6950EM7 PRODUCT DESCRIPTION DRYVIEW 6950 Laser Imaging System with 13.56 MHz RFID TEST REPORT NUMBER NC1401722.2 TEST DATE(S) 07-09 May 2014 TÜV SÜD America Inc, as an independent testing laboratory, declares that the equipment tested as specified above conforms to the applicable EMC requirements of FCC Part 15 Subpart C Sections 15.207 “Conducted Limits” and 15.209 “Radiated emission limits; general requirements” and IC RSS-210 “Low-power Licence-exempt Radiocommunication Devices (All Frequency Bands): Category I Equipment” and IC RSS-Gen “General Requirements and Information for the Certification of Radiocommunication Equipment”. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical characteristics. Any modifications necessary for compliance made during testing on the above mentioned date(s) must be implemented in all production units for compliance to be maintained. Date: 04 June 2014 Greg Jakubowski Joel T Schneider Senior EMC Technician Senior EMC Engineer Not Transferable FCC IC: U726950 IC: 7027A-6950 TÜV SÜD AMERICA INC 1775 Old Hwy 8 NW, Suite 104 New Brighton MN 55112-1891 Tel: (651) 638-0297 Fax: (651) 638-0298 Rev. 113006 EMC TEST REPORT Test Report No. NC1401722.2 Date of issue: 04 June 2014 Product Name DRYVIEW 6950 Laser Imaging System with 13.56 MHz RFID Model(s) Tested DRYVIEW 6950 Serial No(s) Tested 6950EM7 Product Description DRYVIEW 6950 Laser Imaging System with 13.56 MHz RFID Manufacturer Carestream Health Incorporated 1049 W Ridge Road Rochester NY 14615 Test Result  Positive  Negative TÜV SÜD America Inc reports apply only to the specific samples tested under stated test conditions. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. TÜV SÜD America Inc shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD America Inc issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. TÜV SÜD America’s Wild River Lab Oakwood Lab maintains A2LA accreditation to ISO/IEC 17025 for the specific tests listed in A2LA Certificate #2955.11 as an Electrical Testing Laboratory. TÜV SÜD America Inc and its professional staff hold government and professional organization certifications and are members of AAMI, ACIL, AEA, ANSI, IEEE, NARTE, and VCCI. Test Report NC1401722.2Page 1 of 30 FCC IC: U726950 IC: 7027A-6950 TÜV SÜD AMERICA INC 1775 Old Hwy 8 NW, Suite 104 New Brighton MN 55112-1891 Tel: (651) 638-0297 Fax: (651) 638-0298 Rev. 113006 REVISION RECORD REVISION TOTAL NUMBER OF PAGES DATE DESCRIPTION 30 04 June 2014 Initial Release Test Report NC1401722.2Page 2 of 30 FCC IC: U726950 IC: 7027A-6950 TÜV SÜD AMERICA INC 1775 Old Hwy 8 NW, Suite 104 New Brighton MN 55112-1891 Tel: (651) 638-0297 Fax: (651) 638-0298 Rev. 113006 D I R E C T O R Y Contents Revision Record 2 Directory 3 Test Regulations 4 Environmental Conditions 4 Power Supply 4 Test Equipment Traceability 4 Test Information General Field Strength Limits 0.009 – 30 MHz FCC 15.209(a), (c), IC RSS-210 2.5, RSS- GEN 7.2.5 5 Radiated Emissions 30 - 8000 MHz 15.209(c) & (f) , IC RSS-210 2.5 6 - 8 Occupied Bandwidth RSS-Gen 4.6.1 9 - 11 Conducted limits - AC Power Lines 15.207(a), IC RSS-Gen 7.2.4 12 - 13 Test area diagram 14 Test-setup Photos 15 - 19 Equipment Under Test Information 20 General Remarks, Deviations, Summary 21 Appendix A Constructional Data Form 22 - 30 Test Report NC1401722.2Page 3 of 30 FCC IC: U726950 IC: 7027A-6950 TÜV SÜD AMERICA INC 1775 Old Hwy 8 NW, Suite 104 New Brighton MN 55112-1891 Tel: (651) 638-0297 Fax: (651) 638-0298 Rev. 113006 EMC TEST REGULATIONS: The tests were performed according to the following regulations: FCC Part 15 Subpart C Section 15.207 Paragraph (a) FCC Part 15 Subpart C Section 15.209 Paragraphs (a), (c), (f) IC RSS-210 Issue 8 Section 2.5 IC RSS-Gen Issue 3 Sections 4.6.1, 7.2.5 ENVIRONMENTAL CONDITIONS IN THE LAB Actual Temperature: : 22-23°C Atmospheric pressure : 98-99kPa Relative Humidity : 35-41% POWER SUPPLY UTILIZED Power supply system : 110/230 V / 60/50 Hz TEST EQUIPMENT All measurement instrumentation is traceable to the National Institute of Standards and Technology and is calibrated according to internal procedure. MEASUREMENT UNCERTAINTY The test system for conducted emissions is defined as the LISN, tuned receiver or spectrum analyzer, and coaxial cable. The test system has a measurement uncertainty of ±1.8 dB. The test system for radiated emissions is defined as the antenna, the pre-amplifier, the spectrum analyzer and the coaxial cable. The test system has a measurement uncertainty of ±4.8 dB. All measurement instrumentation is traceable to the National Institute of Standards and Technology and is calibrated according to internal procedure. SIGN EXPLANATIONS  - not applicable  - applicable Test Report NC1401722.2Page 4 of 30 FCC IC: U726950 IC: 7027A-6950 TÜV SÜD AMERICA INC 1775 Old Hwy 8 NW, Suite 104 New Brighton MN 55112-1891 Tel: (651) 638-0297 Fax: (651) 638-0298 Rev. 113006 General field strength limits 0.009 – 30 MHz FCC 15.209(a), FCC 15.209(c), IC RSS-210 2.5, RSS-Gen 7.2.5 Test summary The requirements are:  - MET  - NOT MET Testing was perf…

Text truncated - open the document above for the full version.

TÜV SÜD AMERICA INC 1775 Old Hwy 8 NW, Suite 104 New Brighton MN 55112-1891 Tel: (651) 638-0297 Fax: (651) 638-0298 Rev. 113006 TEST REPORT FCC Part 15 Subpart C Section 15.207 FCC Part 15 Subpart C Section 15.209 IC RSS-210 Issue 8 IC RSS-Gen Issue 3 MANUFACTURER'S NAME Carestream Health Incorporated 1049 W Ridge Road Rochester NY 14615 PRODUCT NAME TRIMAX TX65 Laser Imaging System with 13.56 MHz RFID MODEL NUMBER(S) TESTED TRIMAX TX65 SERIAL NUMBER(S) TESTED 6950EM7 PRODUCT DESCRIPTION TRIMAX TX65 Laser Imaging System with 13.56 MHz RFID TEST REPORT NUMBER NC1401722.5 TEST DATE(S) 07-09 May 2014 TÜV SÜD America Inc, as an independent testing laboratory, declares that the equipment tested as specified above conforms to the applicable EMC requirements of FCC Part 15 Subpart C Sections 15.207 “Conducted Limits” and 15.209 “Radiated emission limits; general requirements” and IC RSS-210 “Low-power Licence-exempt Radiocommunication Devices (All Frequency Bands): Category I Equipment” and IC RSS-Gen “General Requirements and Information for the Certification of Radiocommunication Equipment”. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical characteristics. Any modifications necessary for compliance made during testing on the above mentioned date(s) must be implemented in all production units for compliance to be maintained. Date: 04 June 2014 Greg Jakubowski Joel T Schneider Senior EMC Technician Senior EMC Engineer Not Transferable FCC IC: U726950 TÜV SÜD AMERICA INC 1775 Old Hwy 8 NW, Suite 104 New Brighton MN 55112-1891 Tel: (651) 638-0297 Fax: (651) 638-0298 Rev. 113006 EMC TEST REPORT Test Report No. NC1401722.5 Date of issue: 04 June 2014 Product Name TRIMAX TX65 Laser Imaging System with 13.56 MHz RFID Model(s) Tested TRIMAX TX65 Serial No(s) Tested 6950EM7 Product Description TRIMAX TX65 Laser Imaging System with 13.56 MHz RFID Manufacturer Carestream Health Incorporated 1049 W Ridge Road Rochester NY 14615 Test Result  Positive  Negative TÜV SÜD America Inc reports apply only to the specific samples tested under stated test conditions. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. TÜV SÜD America Inc shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD America Inc issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. TÜV SÜD America’s Wild River Lab Oakwood Lab maintains A2LA accreditation to ISO/IEC 17025 for the specific tests listed in A2LA Certificate #2955.11 as an Electrical Testing Laboratory. TÜV SÜD America Inc and its professional staff hold government and professional organization certifications and are members of AAMI, ACIL, AEA, ANSI, IEEE, NARTE, and VCCI. Test Report NC1401722.5Page 1 of 30 FCC IC: U726950 TÜV SÜD AMERICA INC 1775 Old Hw…

Text truncated - open the document above for the full version.