UB8-FWBD0501Broadband Digital Transmission System Module

FWBD0501 User’s Guide Revision 1.0 1 November 2012 Copyright © 2012 Deliberant www.deliberant.com deliberant Page 2 Copyright © 2012 Deliberant This user’s guide and the software described in it are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Deliberant. Notice Deliberant reserves the right to change specifications without prior notice. While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. Deliberant shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from Deliberant. Trademarks Deliberant logo is trademark of Deliberant LLC. All other registered and unregistered trademarks in this document are the sole property of their respective owners. FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 100cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. deliberant Page 3 List of additional approval antenna: Omni Directional (fiberglass pole) EXTRALINK OMNI 12dBi Omni Directional (Rubber Duck Omni Antenna (RPSMA)) 3dBi Sector FWA-5 16dBi Panel FWA-24 8dBi Panel FWA18 14dBi Dish RocketDish 24dBi Antenna Installation Warning: 1, It is installer’s responsibility to ensure that when using the authorized antennas in the United States (Or where FCC rules only); 2, only those antennas certified with the product are used; 3, the use of any antenna other than those certified with the product is expressly forbidden in accordance to FCC rules CFR 47 part 15.204; 4, The Installer should configure the output power level of antenna, according to country regulations and per antenna type; 5, Professional installation is required of equipment with connectors to ensure compliance with health and safety issues. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 100 cm may be maintained between the antenna and users. This final and product must be labeled in a visible area with the following: Contains FCC ID: “UB8-FWBD0501’’. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/Warning as show in this manual. RSS (Category I Equipment): This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. deliberant Page 4 This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. User’s Guide deliberant Page 5 Contents Copyright ............................................................................................................................................. 2 Notice .................................................................................................................................................. 2 Trademarks ......................................................................................................................................... 2 CONTENTS ........................................................................................................................................... 5 ABOUT THIS GUIDE............................................................................................................................. 7 Prerequisite Skills and Knowledge ...................................................................................................... 7 Conventions Used in this Document ................................................................................................... 7 Abbreviation List .................................................................................................................................. 7 INITIAL DEVICE SETUP ....................................................................................................................... 8 Initial AP Setup .................................…

Text truncated - open the document above for the full version.

Deliberant LLC 138 Mountain Brook Dr Canton, GA 30115 United States Tel:(800)742-9865 Fax: (866) 893-8432 FCC Authorization 9/24/2012 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Deliberant LLC , the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Sincerely Yours, Caleb C Knauer COO

MODULAR APPROVAL LETTER Date:2012-9-26 Dear Application Examiner: Deliberant LLC is submitting this application for certification of their Broadband Digital Transmission System under FCC ID: UB8-FWBD0501. It is seeking modular approval. The radio meets the requirements for modular approval as detailed in FCC 15.212. Compliance to each of the requirements which described below: 1. “The modular transmitter must have its own RF shielding.” The radio portion of the module is contained in its own RF shielding. The shielding is installed at the factory. Please see the EUT Photos . 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs to insure compliance with Part 15 requirements under conditions of excessive data rates or over modulation. Please see the Schematics exhibit. 3. “The modular transmitter must have its own power supply regulation.” The EUT has its own power supply regulation to insure compliance with Part 15 requirements regardless of the quality or level of external DC supplying the module from the host unit. Please see user manual. Also, the technical report exhibit contains AC power line conducted emissions data taken with the EUT powered from a linear power supply that contains no EMC suppression components. 4. “The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c).” The EUT meets the FCC antenna requirements. Please see EUT photo, user manual . 5. “The modular transmitter must be tested in a stand-alone configuration.” The EUT was tested in a stand-alone configuration. Please see test setup photos exhibit and technical report exhibit. 6. “The modular transmitter must be labeled with its own FCC ID number.” The module will be labeled with its own FCC ID number. The FCC ID: UB8-FWBD0501 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The module complies with all applicable of FCC rules; instructions for maintaining compliance are given in the use manual 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. Please see technical report and the user manual. Please contact me if you have additional questions. Your attention to this matter is greatly appreciated. Best regards, Signature: Caleb C Knauer COO

Deliberant LLC 138 Mountain Brook Dr Canton, GA 30115 United States Tel:(800)742-9865 Fax: (866) 893-8432 FCC Confidential Authorization 2012-11-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request regarding application for certification of FCC ID: UB8- FWBD0501 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: • Detailed Circuit Schematics of EUT--- (Long term) ƒ Block Diagram--- (Long term) ƒ Circuit Description--- (Long term) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely Yours, Signature: Caleb C Knauer COO

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Type 1: EUT – Top View EUT – Bottom View EUT – Side View Type 2: EUT – Top View EUT – Bottom View EUT – Side View EUT – 3dBi Antena Full View Omni Directional (Rubber Duck Omni Antenna (RPSMA)) EUT – 3dBi Antena Port View Omni Directional (Rubber Duck Omni Antenna (RPSMA)) EUT – 8dBi Antena Top View 1 (Panel FWA-24) EUT – 8dBi Antena Top View 2 (Panel FWA-24) EUT – 8dBi Antena Bottom View (Panel FWA-24) EUT – 8dBi Antena Side View 1 (Panel FWA-24) EUT – 8dBi Antena Side View 2 (Panel FWA-24) EUT – 12dBi Antena Full View (Omni Directional (fiberglass pole) EXTRALINK OMNI) EUT – 12dBi Antena Top View (Omni Directional (fiberglass pole) EXTRALINK OMNI) EUT – 12dBi Antena Port View (Omni Directional (fiberglass pole) EXTRALINK OMNI) EUT – 14dBi Antena Top View 1 (Panel FWA18) EUT – 14dBi Antena Top View 2 (Panel FWA18) EUT – 14dBi Antena Bottom View (Panel FWA18) EUT – 14dBi Antena Side View 1 (Panel FWA18) EUT – 14dBi Antena Side View 2 (Panel FWA18) EUT – 16dBi Antena Top View (Sector FWA-5) EUT – 16dBi Antena Bottom View (Sector FWA-5) EUT – 16dBi Antena Side View 1 (Sector FWA-5) EUT – 16dBi Antena Side View 2 (Sector FWA-5) EUT – 24dBi Antena Front View (Dish RocketDish) EUT – 24dBi Antena Rear View (Dish RocketDish) AC Adapter View AC Adapter Label View PoE Power Adapter View PoE Power Adapter Label View

EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label FCC ID Label Location Label here The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Type 1: EUT – Top Shielding off View Type 2: EUT – Top Shielding off View

AirMax Carrier Class 2x2 PtP Bridge Dish Antenna Models: RD-2G-24, RD-3G-26, RD-5G-30, RD-5G-34 Ultimate in RF Performance Integrated Mount lets you easily snap Rocket M into place Incredible Range and Speed rocket D I S H Datasheet | rocket D I S H Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reservedwww.ubnt.com * When paired with Rocket M GPS * RocketDish is a Carrier Class Dish Antenna that was designed to seamlessly integrate with Rocket M radios (sold separately). Rocket M combines the “brains” in one robust unit; pair Rocket M with RocketDish to create powerful 2x2 MIMO PtP bridging applications. This seamless integration gives network architects unparalleled flexibility and convenience. On the right is one example of how RocketDishes can be deployed: Internet Backbone ISP Network RocketDish with Rocket M RocketDish with Rocket M AirMax BaseStation with Rocket M Corporate building with NanoStation M client. House with NanoStation M client. Small business with NanoStation M client. Lightpole with NanoStation M daisy- chained to a PicoStation M to create a wireless hotspot. AirMax 2x2 PtP Dish Antenna RocketDish Antennas and Rocket M radios have been designed to seamlessly work together. Installing Rocket M on RocketDish requires no special tools, you simply snap it securely into place with the universal Rocket mount built into the antennas. Easy Installation Pair RocketDish with Rocket M GPS to utilize Ubiquiti AirSync GPS Synchronization technology. AirSync enhances the hardware and software of Rocket M to use GPS signals for precision timing. GPS Signal Reporting AirOS was upgraded to take full advantage of the new GPS hardware in Rocket M GPS units; easily manage/monitor GPS satellite signals. No Co-location Interference Synchro- nized transmission among Rocket M GPS powered BaseStations effectively eliminates co-location interference. Seamless AirMax Integration Rocket M GPS units seamlessly integrate with AirMax BaseStation and RocketDish Antennas. Channel Re-use Frequency reuse for increased scalability. GPS Synchronization Unlike standard WiFi protocol, Ubiquiti's Time Division Multiple Access (TDMA) AirMax protocol allows each client to send & receive data using pre-designated time slots scheduled by an intelligent AP controller. This "time slot" method eliminates hidden node collisions & maximizes air time efficiency. It provides many magnitudes of performance improvements in latency, throughput, & scalability compared to all other outdoor systems in its class. Intelligent QoS Priority is given to voice/video for seamless access. Scalability High capacity and scalability. Long Distance Capable of high speed 50km+ links Latency Multiple features dramatically reduce noise. Integrated AirMax Technology 02 1 2 3 4 5 6 7 8 9 Overview ROCKETDISH PTP (Point to Point) BACKHAUL LINK 12 3 4 5 6789 Datasheet | rocket D I S H 03 Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reservedwww.ubnt.com Models *RocketDish does not include Rocket M (sold separately) **RocketDish Radome does not include RocketDish (sold separately) RAD-2RD (2 ft / 648 mm) RAD-3RD (3 ft / 972 mm) • Greatly Reduce Wind Load • Protect Antenna Surfaces from Harsh Environments • Conceal Antenna Equipment from Public view • Designed specifically for RocketDish Antennas RocketDish Radome** RD-2G-24 (2.4 GHz, 24 dBi) RD-3G-26 (3.3-3.7 GHz, 26 dBi) RD-5G-30 (5 GHz, 30 dBi) RD-5G-34 (5 GHz, 34 dBi) RocketDish* Datasheet | rocket D I S H AirOS is an intuitive, versatile, highly developed Ubiquiti firmware technology. It is exceptionally intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture which enables hi-performance outdoor multipoint networking. Protocol Support Ubiquiti Channelization Spectral Width Adjust ACK Auto-Timing AAP Technology GPS Signal Reporting* 04 Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reservedwww.ubnt.com Software View OS Integrated on all Ubiquiti M products, AirView provides Advanced Spectrum Analyzer Functionality: Waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference. Waterfall Aggregate energy over time for each frequency. Waveform Aggregate energy collected. Real-time Energy is shown real-time as a function of frequency. Recording Automize AirView to record and report results. Contro l AirControl is a powerful and intuitive web based server network management application which allows operators to centrally manage entire networks of Ubiqutii devices. Network Map Monitor Device Status Mass Firmware Upgrade Web UI Access Manage Groups of Devices Task Scheduling www.ubnt.com/aircontrol www.ubnt.com/airview www.ubnt.com/airos * When RocketDish is paired with Rocket M * Datasheet | rocket D I S H Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reservedwww.ubnt.com 05 Specifications Antenna Characteristics RD-2G-24RD-3G-26RD-5G-30RD-5G-34 Frequency Range2.3-2.7 GHz3.3-3.8 GHz5.1-5.8 GHz Gain24 dBi26 dBi30 dBi34 dBi PolarizationDual Linear Cross-pol Isolation35 dB min Max VSWR1.6:11.4:1 Hpol Beamwidth3.8 deg. (Rx Dish) 6.6 deg. (Tx Dish) 7 deg. (6 dB)5 deg. (3 dB)3 deg. (3 dB) Vpol Beamwidth3.8 deg. (Rx Dish) 6.6 deg. (Tx Dish) 7 deg. (6 dB)5 deg. (6 dB)3 deg. (6 dB) F/B Ratio-50 dB (Rx Dish) -65 dB (Tx Dish) -33 dB-34 dB-42 dB ETSI SpecificationEN 302 326 DN2 MountingUniversal pole mount, Rocket M bracket, and weatherproof RF jumpers included Dimensions648 mm diameter1050 mm diameter Weight9.8 kg13.5 kg Wind Survivability120 mph125 mph Wind Loading113 lb @ 100 mph256 lb @ 100 mph RocketDish does not include Rocket M (sold separately) Datasheet | rocket D I S H Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reservedwww.ubnt.com 06 Specifications (cont.) RD-3G-26 90 -90 120 -120 150 -150 180 60 -60 30 -30 0 -30 3.43.5 pol #1 dB GHz 3.6 -20 -10 pole #2 E-Plane, 3550 MHzReturn Loss -25 -120-60060 dB degrees…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, NIST, or any agency of the Federal Government. * This report may contain data that are not covered by the NVLAP accreditation and shall bemarked with an asterisk “★”. FCC PART 15.247 MEASUREMENT AND TEST REPORT For Deliberant LLC 138 Mountain Brook Dr Canton, GA 30115 United States R e p o r t T y p e : O r i g i n a l R e p o r t P r o d u c t T y p e : B r o a d b a n d D i g i t a l T r a n s mi s s i o n S y s t e m Test Engineer: Tiger Ye Report Number: RSZ120906004-00 Report Date: 2012-11-07 Reviewed By: Alvin Huang RF Leader Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn FCC ID: UB8-FWBD0501 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ120906004-00 FCC Part 15.247 Page 2 of 187 TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................4 OBJECTIVE...................................................................................................................................................................4 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................4 TEST METHODOLOGY..................................................................................................................................................4 TEST FACILITY.............................................................................................................................................................5 SYSTEM TEST CONFIGURATION ..........................................................................................................................6 DESCRIPTION OF TEST CONFIGURATION......................................................................................................................6 EUT EXERCISE SOFTWARE..........................................................................................................................................6 EQUIPMENT MODIFICATIONS.......................................................................................................................................8 SUPPORT EQUIPMENT LIST AND DETAILS....................................................................................................................8 EXTERNAL I/O CABLE..................................................................................................................................................8 BLOCK DIAGRAM OF TEST SETUP................................................................................................................................8 SUMMARY OF TEST RESULTS ...............................................................................................................................9 FCC §15.247 (i) & §1.1307 (b) (1) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE)............................10 APPLICABLE STANDARD............................................................................................................................................10 FCC §15.203 - ANTENNA REQUIREMENT...........................................................................................................13 APPLICABLE STANDARD............................................................................................................................................13 ANTENNA CONNECTOR CONSTRUCTION....................................................................................................................13 FCC §15.207 (a) - CONDUCTED EMISSIONS .......................................................................................................14 APPLICABLE STANDARD............................................................................................................................................14 MEASUREMENT UNCERTAINTY..................................................................................................................................14 EUT SETUP................................................................................................................................................................14 EMI TEST RECEIVER SETUP.......................................................................................................................................15 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................15 TEST PROCEDURE......................................................................................................................................................15 TEST RESULTS SUMMARY..........................................................................................................................................15 TEST DATA................................................................................................................................................................15 FCC §15.209, §15.205 & §15.247(d) - SPURIOUS EMISSIONS.............................................................................20 APPLICABLE STANDARD............................................................................................................................................20 MEASUREMENT UNCERTAINTY.....................................…

Text truncated - open the document above for the full version.

EXHIBIT C - TEST SETUP PHOTOGRAPHS Conducted Emissions- Front View (AC Adapter Power) Conducted Emissions- Side View (AC Adapter Power) Conducted Emissions- Front View (PoE Power) Conducted Emissions- Side View (PoE Power) Radiated Emissions View (Below 1 GHz, 3dBi Antenna) Radiated Emissions View (Above 1 GHz, 3dBi Antenna) Radiated Emissions View (Below 1 GHz, 8dBi Antenna) Radiated Emissions View (Above 1 GHz, 8dBi Antenna) Radiated Emissions View (Below 1 GHz, 12dBi Antenna) Radiated Emissions View (Above 1 GHz, 12dBi Antenna) Radiated Emissions View (Below 1 GHz, 14dBi Antenna) Radiated Emissions View (Above 1 GHz, 14dBi Antenna) Radiated Emissions View (Below 1 GHz, 16dBi Antenna) Radiated Emissions View (Above 1 GHz, 16dBi Antenna) Radiated Emissions View (Below 1 GHz, 24dBi Antenna) Radiated Emissions View (Above 1 GHz, 24dBi Antenna)