UK5MOKTAKBluetooth Speaker

MANUAL MOKTAK Bluetooth Speaker Included Items: - Speaker - Micro USB Charging Cable - Auxiliary / AUX Cord Micro USB charging port & Auxiliary port Before using your speaker, connect to power source and charge speaker. The initial charge should take approximately 2,5 hours. Charging Instructions: 1. Connect the Micro USB charging Cable to a USB Port 2. Red light indicates speaker is in charging mode. 3. No light indicates full charge complete. 4. Once fully charged, play time is approximately 8 hours. Note: The speaker will beep when it is down to 10% power to indicate charging is needed. Powering Speaker ON/OFF: Press and hold the Power Button for 3 seconds to power ON and OFF. When speaker is not in use, turn power device off to preserve battery power. Pairing Your Device: 1. Press and hold the Power Button. 2. You will hear one beep and a blue light will start flashing. Continue holding the Power Button and wait for the second beep and the red/blue light to begin flash i 3. At this point the speaker is discoverable and ready to pair to your device. 4. On your device, set your Bluetooth capability to discoverable. 5. On your Bluetooth device list, select MOKTAK. 6. Once paired, your device should link to the speaker whenever in 30 foot (10m) range. 7. NFC function is available . Note: Speaker can be paired with only one device at a time. Playing Music: 1. Turn on speaker and pair your device (see previous sections). 2. If previously paired, speaker will flash blue light indicating that it is searching for your device. 3. Use your device to start play music. 4. For Bluetooth paired mode, use +/- keys on speaker to skip back and forth to navigate songs. Use your device to control volume. 5. For Auxiliary mode, press and hold +/-keys to control volume. Use your device to navigate songs. Flexible Cable : 1. Bend the cable any shape and the cable will be able to retain this shape . 2. The bent cable can serve as a hook , a handle and a stander . FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 EUT View 3 EUT View 4 Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 EUT View 5 EUT View 6 Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 EUT View 7 EUT View 8

Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: UK5MOKTAK This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specifications: Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location

Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: UK5MOKTAK This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specifications: Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location

Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 Solder Board-Component View 1 Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 Solder Board-Component View 2 Solder Board-Component View 3 BT Antenna Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 Solder Board-Component View 4 Solder Board-Component View 5 Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 Solder Board-Component View 6 Solder Board-Component View 7 Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 Solder Board-Component View 8

RF Exposure Requirements Product Description: Bluetooth Speaker Model No.: MOKTAK FCC ID: UK5MOKTAK According to the KDB-447498 D01 V05r02, the following RF exposure evaluation shall to demonstrate RF exposure compliance. Bluetooth Tx frequency range: 2402~2480MHz Device category: Removable device Maximum Conducted Output Power: -3.383dBm (0.4589mW) Maximum Antenna Gain: 2 dBi Maximum EIRP Output Power: -1.383dBm (0.7273mW) Minimum Distance: 5mm Limit: 10mW Source-based time-averaged EIRP output power is0.7273 mW < 10 mW So the transmitter complies with the RF exposure requirements and the SAR is not required.

Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I PAGE 1 OF 53 FCC PART 15.247 FCC Part 15C Measurement and Test Report For Chuang Feng Electronics Co., Ltd. Bihua Road, Songbotang, Changping Town, Dongguan City, China FCC ID: UK5MOKTAK FCC Rule(s): FCC Part 15.247 Product Description: Bluetooth Speaker Tested Model: MOKTAK Report No.: STRD1405067I Tested Date: 2014-05-28 to 2014-06-20 Issued Date: 2014-06-20 Tested By: Tony Lan / Engineer Reviewed By: Lahm Peng / EMC Manager Approved & Authorized By: Jandy so / PSQ Manager Prepared By: Shenzhen SEM.Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bao'an District, Shenzhen, P.R.C.（518101） Tel.: +86-755-33663308 Fax.: +86-755-33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM.Test Technology Co., Ltd. Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I PAGE 2 OF 53 FCC PART 15.247 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................... 5 1.3 TEST METHODOLOGY ............................................................................................................................................. 5 1.4 TEST FACILITY ....................................................................................................................................................... 5 1.5 EUT SETUP AND TEST MODE ................................................................................................................................. 6 2. SUMMARY OF TEST RESULTS ........................................................................................................................... 7 3. RF EXPOSURE ......................................................................................................................................................... 8 3.1 STANDARD APPLICABLE ......................................................................................................................................... 8 3.2 TEST RESULT.......................................................................................................................................................... 8 4. ANTENNA REQUIREMENT .................................................................................................................................. 9 4.1 STANDARD APPLICABLE ......................................................................................................................................... 9 4.2 EVALUATION INFORMATION .................................................................................................................................. 9 5. FREQUENCY HOPPING SYSTEM REQUIREMENTS ................................................................................... 10 5.1 STANDARD APPLICABLE ....................................................................................................................................... 10 5.2 FREQUENCY HOPPING SYSTEM............................................................................................................................. 10 5.3 EUT PSEUDORANDOM FREQUENCY HOPPING SEQUENCE .................................................................................... 11 6. QUANTITY OF HOPPING CHANNELS AND CHANNEL SEPARATION ................................................... 12 6.1 STANDARD APPLICABLE ....................................................................................................................................... 12 6.2 TEST EQUIPMENT LIST AND DETAILS ................................................................................................................... 12 6.3 TEST PROCEDURE ................................................................................................................................................. 12 6.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 12 6.5 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 13 7. DWELL TIME OF HOPPING CHANNEL .......................................................................................................... 17 7.1 STANDARD APPLICABLE ....................................................................................................................................... 17 7.2 TEST EQUIPMENT LIST AND DETAILS ................................................................................................................... 17 7.3 TEST PROCEDURE ................................................................................................................................................. 17 7.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 17 7.5 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 18 8. 20DB BANDWIDTH ............................................................................................................................................... 28 8.1 STANDARD APPLICABLE ....................................................................................................................................... 28 8.2 TEST EQUIPMENT LIST AND DETAILS .......................…

Text truncated - open the document above for the full version.

Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 EXHIBIT 4 - TEST SETUP PHOTOGRAPHS Conducted Emission Test Setup Radiation Emission Test Setup Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 Radiation Emission Test Setup (Below 30MHz) Radiation Emission Test Setup (30MHz to 1GHz) Chuang Feng Electronics Co., Ltd. Model: MOKTAK REPORT NO.: STRD1405067I FCC PART 15.247 Radiation Emission Test Setup (Above 1GHz)