UMPTX343Remote controller

TX342 1/5 TX342 Remote Electronic Ignition and Control System OPERATING INSTRUCTIONS -FOR OEM USE ONLY ⚠ WARNING GM8K-935 NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsi- ble for compliance could void the user’s authority to operate the equip- ment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accord- ance with the instructions, may cause harmful interference to radio com- munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compli- ance with FCC exposure compliance requirement, please follow opera- tion instruction as documented in this manual. NOTE: This device complies with CAN ICES-3 (B)/NMB-3(B) ◆ This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit repond aux specifications techniques applicables a l'inno- vation, Science et Developpement economique Canada. ◆ Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interfer- ence that may cause undesired operation of the device. Le present appareil est conforme aux CNR d’Industrie Canada appli- cables aux appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioelec- trique subi, meme si le brouillage est susceptible d’en compro- mettre le fonctionnement. ◆ ISED RF exposure statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co- located or operating in conjunction with any other antenna or trans- mitter. Cet équipement est conforme aux limites d'exposition aux rayonne- ments ISED établies pour un environnement non contrôlé. Cet émetteur ne doit pas être co-localisé ou fonctionner en conjonction avec une autre antenne ou un autre émetteur. Fire or explosion hazard. Attempted disassembly or repair of con- trols can cause property damage, severe injury or death. Do not disassemble the gas valve; it contains no serviceable components. Read these instructions carefully. Failure to follow them could re- sult in a fire or explosion causing property damage, personal inju- ry, or loss of life. The product must be installed and operated according to all local regulations. A. ● Do not light any appliance. ● Do not touch any electrical switch; do not use any phone in your building. ● ● If you cannot reach the gas supplier, call the fire department. B. Use only your hand to push in or turn the gas control knobs. Never use tools. If a knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion. C. Do not use this control or any gas appliance if any part has been under water or in contact with water.Immediately call a qualified service technician to replace the control system and any gas control system which has been under water or in contact with water. D. These instructions are to be referenced as a user guide, and do not supersede appliance manufacturer’s lighting instructions. APPLICATION TX342 is a battery-powered electronic remote ignition and control system for gas appliances with pilot burners and ODS systems. GENERAL NOTES Radio frequency Remote 315 MHz for US, Canada; Batteries - Remote Handset: 3 x1.5V “AAA” (quality alkaline recommended) 4.5V 100mA Batteries - Receiver: 4 x 1.5V “AA” (quality alkaline recommended) 6.0V 1500mA NOTE: These remote handsets, receiver, wall switches,are not interchangeable with previous versions. For all lighting/ignition instructions please referto appliance manufacturer’s instructions. An AC Mains Adapter may be used instead of batteries (only the Grand Mate or an AC Mains Adapter approved by Grand Mate can be used). TX342—Operating Instructions D03 2/5 TX343 SERIES REMOTE HANDSET FEATURES Remote Controller Model 315MHz Unidirectional TX342 TX343 ON/ OFF ★ ★ Childproof ★ ★ Revo Home Compatible** ★ ★ Flame Height Adjustment ★ ★ Standing Pilot* ★ ★ LCD ★ ★ Low Battery Indicator ★ ★ Second Burner Thermostat ★ ★ Timer ★ ★ Error Code Notification** ★ ★ Fan Speed Light Dimmer AUX ON/ OFF Fan Delay ON/ OFF Clock ★ Daily Program Thermostat ★ 3 Independent Access Keys *Disabled for Europe **ONLY for Bidirectional Model TX342 TX343 TX342—Operating Instructions D03 3/5 SYMBOL Figure 1: Symbol Display SETTIN…

Text truncated - open the document above for the full version.

1/6 TX343 Remote Electronic Ignition and Control System OPERATING INSTRUCTIONS -FOR OEM USE ONLY Fire or explosion hazard. Attempted disassembly or repair of con- trols can cause property damage, severe injury or death. Do not disassemble the gas valve; it contains no serviceable components. Read these instructions carefully. Failure to follow them could re- sult in a fire or explosion causing property damage, personal inju- ry, or loss of life. The product must be installed and operated according to all local regulations. A. ● Do not light any appliance. ● Do not touch any electrical switch; do not use any phone in your building. ● ● If you cannot reach the gas supplier, call the fire department. B. Use only your hand to push in or turn the gas control knobs. Never use tools. If a knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion. C. Do not use this control or any gas appliance if any part has been under water or in contact with water.Immediately call a qualified service technician to replace the control system and any gas control system which has been under water or in contact with water. D. These instructions are to be referenced as a user guide, and do not supersede appliance manufacturer’s lighting instructions. APPLICATION TX343 is a battery-powered electronic remote ignition and control system for gas appliances with pilot burners and ODS systems. GENERAL NOTES TX343 Radio frequency Remote 315 MHz for US, Canada; ⚠ WARNING NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsi- ble for compliance could void the user’s authority to operate the equip- ment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accord- ance with the instructions, may cause harmful interference to radio com- munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compli- ance with FCC exposure compliance requirement, please follow opera- tion instruction as documented in this manual. NOTE: This device complies with CAN ICES-3 (B)/NMB-3(B) ◆ This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit repond aux specifications techniques applicables a l'inno- vation, Science et Developpement economique Canada. ◆ Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interfer- ence that may cause undesired operation of the device. Le present appareil est conforme aux CNR d’Industrie Canada appli- cables aux appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioelec- trique subi, meme si le brouillage est susceptible d’en compro- mettre le fonctionnement. ◆ ISED RF exposure statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co- located or operating in conjunction with any other antenna or trans- mitter. Cet équipement est conforme aux limites d'exposition aux rayonne- ments ISED établies pour un environnement non contrôlé. Cet émetteur ne doit pas être co-localisé ou fonctionner en conjonction avec une autre antenne ou un autre émetteur. Batteries - Remote Handset: 3 x1.5V “AAA” (quality alkaline recommended) 4.5V 100mA Batteries - Receiver: 4 x 1.5V “AA” (quality alkaline recommended) 6.0V 1500mA NOTE: These remote handsets, receiver, wall switches,are not interchangeable with previous versions. For all lighting/ignition instructions please referto appliance manufacturer’s instructions. GM8K-935 An AC Mains Adapter may be used instead of batteries (only the Grand Mate or an AC Mains Adapter approved by Grand Mate can be used). TX343—Operating Instructions D03 2/6 TX343 SERIES REMOTE HANDSET FEATURES Remote Controller 315MHz Unidirectional TX342 TX343 ON/ OFF ★ ★ Childproof ★ ★ Revo Home Compatible** ★ ★ Flame Height Adjustment ★ ★ Standing Pilot* ★ ★ LCD ★ ★ Low Battery Indicator ★ ★ Second Burner Thermostat ★ ★ Timer ★ ★ Error Code Notification** ★ ★ Fan Speed Light Dimmer AUX ON/ OFF Fan Delay ON/ OFF Clock ★ Daily Program Thermostat ★ 3 Independent Access Keys *Disabled for Europe **ONLY for Bidirectional Model TX342 TX343 TX343—Operating Instructions D03 3/6 SYMBOL Figure 1: Symbol Display SETTING TEMP…

Text truncated - open the document above for the full version.

Grand Mate Co., Ltd CFR 47 §2.911(d)(5)(i) Attestation Letter QA-FR-1006-A RC 02-08-2023 Attestation Letter Date: 02/14/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID:UMPTX343 Grand Mate Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Sarah Huang/Sales Assistant Address: No.30 Lugong S. 2nd Road, Lukang Township, Changhua County, 505 Taiwan TEL: 886-4-22757317 FAX: 886-4-22763502 Email: [email protected]

Grand Mate Co., Ltd CFR 47 §2.911 (d)(5)(ii) Attestation Letter QA-FR-1007 -A RC 02-08-2023 Attestation Letter Date: 02/14/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 § 2.911(d)(5)(ii) Filing FCC ID:UMPTX343 Grand Mate Co., Ltd (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Sarah Huang/Sales Assistant Address: No.30 Lugong S. 2nd Road, Lukang Township, Changhua County, 505 Taiwan TEL: 886-4-22757317 FAX: 886-4-22763502 Email: [email protected]

Grand Mate Co., Ltd CFR 47 §2.911(d)(7) U.S Agent QA-FR-1005 -A RC 02-08-2023 CFR 47 §2.911(d)(7) Agent Designation Attestation 02/14/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID:UMPTX343 Grand Mate Co., Ltd (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. U.S. Agent Information: Contact Name: Joslyn Teng Company Name: Dexen Industries, Inc. Company Address: 9220 S. Norwalk Blvd. Santa Fe Springs, CA 90670 Email: [email protected] Sincerely yours, Applicant Agent Signature Signature Sarah Huang/Sales Assistant Address: No.30 Lugong S. 2nd Road, Lukang Township, Changhua County, 505 Taiwan TEL: 886-4-22757317 FAX: 886-4-22763502 Email: [email protected] FRN: 0014196885

QA-FR-170-B 7/29/2014 Grand Mate Co., Ltd FCC Authorization 2023/01/04 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Grand Mate Co., Ltd the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corp. (Linkou Laboratory) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corp. (Linkou Laboratory) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Sarah Huang/Sales Assistant Address: No.30 Lugong S. 2nd Road, Lukang Township, Changhua County, 505 Taiwan TEL: 886-4-22757317 FAX: 886-4-22763502 Email: [email protected]

QA-FR-171-A Grand Mate Co., Ltd FCC Confidential Authorization 2023/03/28 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:UMPTX343 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Grand Mate Co.,Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  BOM The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Sarah Huang/Sales Assistant Address: No.30 Lugong S. 2nd Road, Lukang Township, Changhua County, 505 Taiwan TEL: 886-4-22757317 FAX: 886-4-22763502 Email: [email protected]

QA-FR-227-A 11/05/2013 Grand Mate Co.,Ltd. DECLARATION OF SIMILARITY March 7, 2023 To: FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We Grand Mate Co.,Ltd. hereby declare that product: Remote controller, model(s): TX342 is electrically identical with the same electromagnetic emissions and electromagnetic compatibility characteristics, difference firmware and XTAL components doesn’t affect to RF characteristic, it’s same as model: TX343 tested by BACL(Linkou Laboratory), the results of which are featured in BACL(Linkou Laboratory) Project Number: RLK221216004RF01 A description of the differences between the tested model and those that are declared similar are as follows: FCC ID: UMPTX343 QA-FR-227-A 11/05/2013 Please contact me should there be need for any additional clarification or information. Best Regards, Responsible Party Signature Sarah Huang/Sales Assistant No.30 Lugong S. 2nd Road, Lukang Township, Changhua County, 505 Taiwan

Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 1 of 6 External Photographs Mode: TX343 Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 2 of 6 Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 3 of 6 Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 4 of 6 Mode: TX342 Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 5 of 6 Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 6 of 6 ***** END *****

Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 1 of 7 Internal Photographs Mode: TX343 Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 2 of 7 Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 3 of 7 Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 4 of 7 Antenna Mode: TX342 Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 5 of 7 Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 6 of 7 Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 7 of 7 Antenna ***** END *****

Note: It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Page 1 of 32 FCC Part 15.231 RSS-GEN ISSUE 5 February 2021 Amendment 2 RSS-210, ISSUE 10, April 2020 Amendment TEST REPORT For Grand Mate Co.,Ltd. No.30, Lugong S.2nd Road, Lukang Township, Changhua County, Taiwan 505 FCC ID: UMPTX343 IC: 8474A-TX343 Report Type: Original Report Product Type: Remote controller Report Producer : JoJo Lu Report Number : RLK221216004RF01 Report Date : 2023-02-22 Reviewed By: David Hsu Prepared By: Bay Area Compliance Laboratories Corp. (Linkou Laboratory) No. 6, Wende 2Rd., Guishan Dist., Taoyuan City 33382, Taiwan (R.O.C.) Tel: +886 (3)3961072 Fax: +886 (3) 3961027 www.bacl.com.tw Bay Area Compliance Laboratories Corp. (Linkou Laboratory) No.:RLK221216004RF01 Note: It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Page 2 of 32 Revision History Revision No. Report Number Issue Date Description Author/ Revised by 0.0 RLK221216004 RLK221216004RF01 2023-02-22 Original Report JoJo Lu Bay Area Compliance Laboratories Corp. (Linkou Laboratory) No.:RLK221216004RF01 Note: It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Page 3 of 32 TABLE OF CONTENTS 1 General Information ......................................................................................................... 5 1.1 Product Description for Equipment under Test (EUT) ......................................................... 5 1.2 Objective ............................................................................................................................... 5 1.3 Related Submittal(s)/Grant(s) ................................................................................................ 5 1.4 Test Methodology.................................................................................................................. 6 1.5 Statement ............................................................................................................................... 6 1.6 Measurement Uncertainty ..................................................................................................... 6 1.7 Environmental Conditions ..................................................................................................... 6 1.8 Test Facility ........................................................................................................................... 7 2 System Test Configuration ............................................................................................... 8 2.1 Description of Test Configuration ......................................................................................... 8 2.2 Equipment Modifications ...................................................................................................... 8 2.3 EUT Exercise Software ......................................................................................................... 8 2.4 Test Mode .............................................................................................................................. 8 2.5 Support Equipment List and Details...................................................................................... 8 2.6 External Cable List and Details ............................................................................................. 8 2.7 Block Diagram of Test Setup ................................................................................................ 9 3 Summary of Test Results ................................................................................................ 10 4 Test Equipment List and Details ................................................................................... 11 5 FCC §1.1307(b)(3)(i) – RF EXPOSURE .................................................................... 12 5.1 Applicable Standard ............................................................................................................ 12 5.2 RF Exposure Evaluation Result........................................................................................... 13 6 FCC §15.203 & RSS-GEN Clause 6.8– Antenna Requirements ................................. 14 6.1 Applicable Standard ............................................................................................................ 14 6.2 Antenna Connected Construction ........................................................................................ 14 7 RSS-102 § 2.5.1 – EXEMPTION LIMITS FROM ROUTINE EVALUATION – SAR EVALUATION ..................................................................................................................... 15 7.1 Applicable Standard ............................................................................................................ 15 7.2 Calculated Data: .................................................................................................................. 16 8 FCC §15.209, §15.205 , §15.231(b) & RSS-210 Annex A.1.2, RSS-GEN Clause 8.10– Radiated Emissions .............................................................................................................. 17 8.1 Applicable Standard ............................................................................................................ 17 8.2 EUT Setup ........................................................................................................................... 18 8.3 EMI Test Receiver & Spectrum Analyzer Setup................................................................. 19 8.4 Test Procedure ..................................................................................................................... 19 8.5 Corrected Factor & Margin Calculation .............................................................................. 19 8.6 Test …

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 1 of 2 EUT Setup Photographs Radiated Emission (Below 1GHz)： Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Project No.: RLK221216004 Page 2 of 2 Radiated Emission (Above 1GHz)： ***** END *****