UZ5-BUD1000001Bluetooth USB Dongle

Bluetooth USB Adapter Bluetooth USB Adapter

FCC ID:UZ5-BUD1000001 Statement in user manual:

RF Exposure Statement 1. Standard Applicable According to 1.1307 (b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a portable device. 2. Measurement Result: This is a portable device and the max peak output power is 7.62 dBm (.0058 W). Lower than the low threshold 60/f GHz = (24.19 mW), d<2.5 cm general population category. The SAR/MPE measurement is not necessary.

Report No.: GLEMR070200418RFT-1 Page: 1 of 40 FCC ID: UZ5-BUD1000001 Authorized Signature: Stephen Guo Manager This report refers to the General Conditions for Inspection and Testing Services, printed overleaf This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. Member of the SGS Group (Société Générale de Surveillance) SGS-CSTC Standards Technical Services Ltd. No.198 Kezhu Road, Science Town Economic& Technology Development District Guangzhou, China 510663Telephone: Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] FEDERAL COMMUNICATIONS COMMISSION Registration number: 282399 TEST REPORT Application No. : GLEMR070200418RF Applicant: Phoenix International Co.,Ltd FCC ID: UZ5-BUD1000001 Fundamental Carrier Frequency : 2.402GHz to 2.480GHz Equipment Under Test (EUT): Name: Bluetooth USB Dongle Model No.: BUD-100,PNX-BTA-6090,H49225,SKM-BD100,PTM-UBT3♣ Standards: FCC PART 15, SUBPART C: 2006 (Section 15.247). Date of Receipt: 14 February 2007 Date of Test: 14 February to 25 June 2007 Date of Issue: 07 July 2007 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 2 of this report for further details. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR070200418RFT-1 Page: 2 of 40 FCC ID: UZ5-BUD1000001 2 Test Summary For Bluetooth Function: Test Test Requirement Standard Paragraph Result Maximum Peak Output Power FCC PART 15 :2006Section 15.247(b)(1) PASS Conducted Emission FCC PART 15 :2006Section 15.207 PASS Conducted Spurious Emission (30MHz to 25GHz) FCC PART 15 :2006 Section 15.209 &15.247(d) PASS Radiated Spurious Emission (30MHz to 25GHz) FCC PART 15 :2006 Section 15.209 &15.247(d) PASS Band Edges Measurement FCC PART 15 :2006 Section 15.247 (d) &15.205 PASS Hopping Channel Number FCC PART 15 :2006 Section 15.247(a)(1)(iii) PASS Carrier Frequencies Separated FCC PART 15 :2006Section 15.247(a)(1) PASS Dwell Time FCC PART 15 :2006 Section 15.247(a)(1)(iii) PASS Antenna Requirement FCC PART 15 :2006Section 15.247 (c) PASS Remark: ♣ Model: BUD-100,PNX-BTA-6090,H49225,SKM-BD100,PTM-UBT3 For only one model was tested, according to the confirmation from the applicant. Since the applicant declared electrical circuit design, layout, components used and internal wiring were identical for the above items, with only difference being the model no. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GLEMR070200418RFT-1 Page: 3 of 40 FCC ID: UZ5-BUD1000001 3 Contents Page 1 COVER PAGE ...........................................................................................................................................1 2 TEST SUMMARY ....................................................................................................................................... 2 3 CONTENTS ................................................................................................................................................ 3 4 GENERAL INFORMATION ........................................................................................................................ 4 4.1 CLIENT INFORMATION.............................................................................................................................. 4 4.2 GENERAL DESCRIPTION OF E.U.T. .......................................................................................................... 4 4.3 DESCRIPTION OF SUPPORT UNITS........................................................................................................... 4 4.4 STANDARDS APPLICABLE FOR TESTING.................................................................................................... 4 4.5 TEST LOCATION...................................................................................................................................... 4 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER............................................................................. 4 4.7 TEST FACILITY........................................................................................................................................ 5 5 EQUIPMENTS USED DURING TEST........................................................................................................ 6 6 TEST RESULTS ......................................................................................................................................... 7 6.1 E.U.T. OPERATION................................................................................................................................. 7 6.2 MAXIMUM PEAK OUTPUT POWER............................................................................................................ 7 6.3 CONDUCTED EMISSIONS MAINS TERMINALS, 150KHZ TO 30MHZ............................................................ 10 6.4 CONDUCTED SPURIOUS EMISSIONS....................................................................................................... 13 6.5 RADIATED SPURIOUS EMISSIONS........................................................................................................... 18 6.6 BAND EDGES REQUIREMENT.........................................…

Text truncated - open the document above for the full version.

Conducted Emission Radiated Spurious Emission