UZZBTSPK05Bluetooth� Speaker

Safety Information Setting up the System To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. As the main plug of AC adaptor is used to disconnect the AC adaptor from the mains, connect it to an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it from the AC outlet immediately. The AC adaptor is not disconnected from the mains as long as it is connected to PORTABLE CART WARNING (Symbol provided by RETAC) Instruction Book WSBS2000 Bluetooth Speaker Design and specifications are subject to change without notice. the AC outlet, even if the main unit itself has been turned off. The nameplate is located on the bottom exterior of the main unit and on the surface of the AC adaptor. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Please read rating label at the bottom of system for power input and other safety information. FCC and IC Information: This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warnings: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and users can obtain Canadian information on RF exposure and compliance from the Canadian Representative Burnport Holdings Ltd. 72MT Belcher Pls, East, Calgary, Alberta, T2Z 2G1, CANADA. Tel: 403-257-4961 Canada IC statments Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling in accordance with your national legislation. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative eects on the environment and human health that could otherwise be caused by inappropriate waste handling of this product. For more information about collection point and recycling of this product, please contact your local municipal oce, your household waste disposal service or the shop where you purchased the product. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. [Other Countries outside the European Union] If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment. Attention: This symbol is only valid in the European Union. 10 cm (3- 15 / 16 ") 15 cm (5- 15 / 16 ") 15 cm (5- 15 / 16 ") 15 cm (5- 15 / 16 ") 15 cm (5- 15 / 16 ") Front view:Side view: Front side Back side FCC&IC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the exemption from the routine evaluation limits in section 2.5 of RSS 102. 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters from user and bystanders. W…

Text truncated - open the document above for the full version.

Beautiful Enterprise Co., Ltd. 26 th Floor, Beautiful Group Tower, Tel: 852-23270195 77 Connaught Road Central, Hong Kong Fax: 852-23523380 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Beautiful Enterprise Co., Ltd would like the following documents regarding this submission for FCC ID: UZZBTSPK05 to be kept confidential. 1. Schematic 2. Block diagram 3. Circuit description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Name: John Liao Title: Product Approbation Supervisor Date: July 27, 2012

Beautiful Enterprise Co., Ltd. 26 th Floor, Beautiful Group Tower, Tel: 852-23270195 77 Connaught Road Central, Hong Kong Fax: 852-23523380 July 27, 2012 To whom it may concern: We the undersigned, hereby authorize EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Beautiful Enterprise Co., Ltd. Sincerely, Signature :............................. Name: John Liao Title: Product Approbation Supervisor

Neutron Engineering Inc. Project No.: 1207C116 Page 2 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 2 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 3 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 3 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 4 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 4 of 11 1207C116 1207C116

Bottom view

Neutron Engineering Inc. Project No.: 1207C116 Page 5 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 5 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 6 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 6 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 7 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 7 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 8 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 8 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 9 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 9 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 10 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 10 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 11 of 11 1207C116 1207C116 Neutron Engineering Inc. Project No.: 1207C116 Page 11 of 11 1207C116 1207C116

Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C116 Page 1 of 133 FCC/IC Radio Test Report FCC ID: UZZBTSPK05 IC: 7633A-BTSPK05 This report concerns (check one) : Original Grant Class II Change Issued Date : Aug. 07, 2012 Project No. : 1207C116 Equipment : Bluetooth® Speaker Model Name : WSBS2000 Applicant : Beautiful Enterprise Co., Ltd. Address : 26th Floor, Beautiful Group Tower, 77 Connaught Road Central, Hong Kong Manufacturer : Beautiful Enterprise Co., Ltd. Address : 26th Floor, Beautiful Group Tower, 77 Connaught Road Central, Hong Kong Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Jul.27, 2012 Date of Test: Jul. 27, 2012 ~ Aug. 06, 2012 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C116 Page 2 of 133 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C116 Page 3 of 133 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BELOW 30MHZ) 23 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 24 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 48 5 . NUMBER OF HOPPING CHANNEL 84 5.1 APPLIED PROCEDURES / LIMIT 84 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 84 5.1.2 TEST PROCEDURE 84 5.1.3 DEVIATION FROM STANDARD 84 5.1.4 TEST SETUP 84 5.1.5 EUT OPERATION CONDITIONS 84 5.1.6 TEST RESULTS 85 Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C116 Page 4 of 133 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 87 6.1 APPLIED PROCEDURES / LIMIT 87 6.1.1 MEASUREMENT INSTRUMENTS LIST 87 6.1.2 TEST PROCEDURE 87 6.1.3 DEVIATION FROM STANDARD 87 6.1.4 TEST SETUP 88 6.1.5 EUT OPERATION CONDITIONS 88 6.1.6 TEST RESULTS 89 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 101 7.1 APPLIED PROCEDURES / LIMIT 101 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 101 7.1.2 TEST PROCEDURE 101 7.1.3 DEVIATION FROM STANDARD 101 7.1.4 TEST SETUP 101 7.1.5 EUT OPERATION CONDITIONS 101 7.1.6 TEST RESULTS 102 8 . BANDWIDTH TEST 106 8.1 APPLIED PROCEDURES / LIMIT 106 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 106 8.1.2 TEST PROCEDURE 106 8.1.3 DEVIATION FROM STANDARD 106 8.1.4 TEST SETUP 106 8.1.5 EUT OPERATION CONDITIONS 106 8.1.6 TEST RESULTS 107 9 . PEAK OUTPUT POWER TEST 112 9.1 APPLIED PROCEDURES / LIMIT 112 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 112 9.1.2 TEST PROCEDURE 112 9.1.3 DEVIATION FROM STANDARD 112 9.1.4 TEST SETUP 112 9.1.5 EUT OPERATION CONDITIONS 112 9.1.6 TEST RESULTS 113 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 117 10.1 APPLIED PROCEDURES / LIMIT 117 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 117 10.1.2 TEST PROCEDURE 117 10.1.3 DEVIATION FROM STANDARD 117 10.1.4 TEST SETUP 117 10.1.5 EUT OPERATION CONDITIONS 117 10.1.6 TEST RESULTS 118 Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C116 Page 5 of 133 Table of Contents Page 11 . EUT TEST PHOTO 130 Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C116 Page 6 of 133 1. CERTIFICATION Equipment : Bluetooth® Speaker Brand Name : WILLIAMS-SONOMA Model Name : WSBS2000 Applicant : Beautiful Enterprise Co., Ltd. Factory : Shenzhen Synchron Electronics Co., Ltd. Address : No. 9 Mei Li Road, Xia Mei Lin, Fu Tian Area, Shenzhen, Guangdong, China Date of Test : Jul. 27, 2012 ~ Aug. 06, 2012 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. …

Text truncated - open the document above for the full version.