UZZRKS100Portable Bluetooth Sound System

PLUGGING IN THE AC ADAPTER PLAYING BACK VIA BLUETOOTH PLAYING BACK VIA AUX ELECTRICAL OUTLET DC JACK Press the ON/OFF button to turn on the unit. The power indicator lights up. Connect any device with headphone or line out jack with a 3.5mm line in cable to AUX IN jack on the bottom of the unit. 1 Press the button to turn on the unit. You can enjoy the sound from an external device such as a portable digital music player. Be sure to turn off the power of the external device before making any connections. For details, refer to the instruction manual of the device to be connected. USB PORT FOR MOBILE DEVICE CHARGING (5V, 500mAh) ADJUSTING THE VOLUME LEVEL Connect one end of the USB cord to your device and the other end to the USB jack of the unit. 1 Press the button to start charging for your device. Press the button again to stop charging. Note: Use the USB power cord that came with your device to connect to the unit. 2 The USB jack can be used to charge most devices that allow for USB charging (including many mobile phones, smart phones and wireless headsets). Press the and buttons to adjust the volume levels. Note: During volume adjustments, if the LED indicator starts to blink, minimum or maximum volume level has been reached. BASS BOOST Press the button to turn on bass boost. Press the button again to turn off. AUTOMATIC ENERGY SAVING If unit is idle for 10 minutes (no sound output or operation), the unit will turn off automatically. SWITCHING E INK DISPLAY BACKGROUND COLORS Press and hold the for 5 seconds to toggle between black and white backgrounds on the E Ink display. CHARGING THE BUILT-IN BATTERY BY THE AC POWER/SOLAR ENERGY The unit has a built-in Lithium ion battery for portable power when not using the AC adapter. When the adapter is plugged in or the unit is exposed under the sunshine, the unit will start charging. During charging, the indicator on the display starts blinking. To fully charge an empty battery: AC/DC: 3 hours Solar: 6 hours *Charge times may vary depending on solar conditions. Note: To maximize battery life, charge the unit through AC for 12 hours prior to first use. Press the Bluetooth button to switch the sound source to Bluetooth mode. The indicator appears on the display. Connect one end of the AC adapter to the DC jack of the unit and the other end to an electrical outlet. Hold the button for 3 seconds to place the unit in pairing mode. The indicator starts blinking rapidly. Unit will give off two short beeps. Note: The indicator turns solid after the unit is successfully connected. If the indicator turn to blink slowly after 3 minutes, the pair was unsuccessful. Open the Bluetooth settings menu on your Bluetooth-enabled mobile device or computer. Once it is recognized, “rukus solar” will appear on the display of the Bluetooth-enabled device. Select “rukus solar” to pair and connect with your device. Note: On an iPhone or iPad, tap “rukus solar” to select. If prompted for a password, enter "1234”. Once Bluetooth is connected, seclect the music and press button on your device. The unit will playback music automatically. Note: Playback time on built-in battery is ~8 hours, depending on music level and other factors. 2 Press the button to switch the sound source to AUX mode, if the unit is not in AUX mode. 3 Turn on your external device and press button. 4 The unit will play back the music from the external device automatically. 5 AUX BASS Portable Bluetooth Sound System with Solar Panel v030612 16 Mar 2012 S afety Information WARNINGS: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER or OPEN THE CABINET. Dangerous high voltages are present inside the enclosure. No user serviceable parts inside. Leave all servicing to qualied service personnel. PORTABLE CART WARNING (Symbol provided by RETAC) Canada IC statments Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. FCC&IC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the exemption from the routine evaluation limits in section 2.5 of RSS 102. 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters from user and bystanders. Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determ ined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.  Consult the dealer or an experienced radio TV technician for help. By disposing of this product correctly, you will help to conserve natural resources and will help …

Text truncated - open the document above for the full version.

Beautiful Enterprise Co., Ltd. 26 th Floor, Beautiful Group Tower, Tel: 852-23270195 77 Connaught Road Central, Hong Kong Fax: 852-23523380 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Beautiful Enterprise Co., Ltd would like the following documents regarding this submission for FCC ID: UZZRKS100 to be kept confidential. 1. Schematic 2. Block diagram 3. Circuit description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Name: John Liao Title: Product Approbation Supervisor Mar 15, 2012

Beautiful Enterprise Co., Ltd. 26 th Floor, Beautiful Group Tower, Tel: 852-23270195 77 Connaught Road Central, Hong Kong Fax: 852-23523380 Mar 15, 2012 To whom it may concern: We the undersigned, hereby authorize EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Beautiful Enterprise Co., Ltd. Sincerely, Signature : Name: John Liao Title: Product Approbation Supervisor

Beautiful Enterprise Co., Ltd. 26 th Floor, Beautiful Group Tower, Tel: 852-23270195 77 Connaught Road Central, Hong Kong Fax: 852-23523380 Model Declaration Letter Mar 15, 2012 To whom it may concern: We the undersigned, hereby confirm that the following products: Product description: Portable Bluetooth Sound System Type designation: RKS100; RK100 Brand: That All versions of the Model RKS100 and RK100 are electrically equal and only model differs as RKS100(With solar panel and rechargeable li-battery 7.4Vd.c,1500mAh), RK100 (Without solar panel and rechargeable li-battery) Signature :............................. Name: John Liao Title: Product Approbation Supervisor

Neutron Engineering Inc. Project No.: 1203C041 Page 2 of 14 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 3 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 3 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 4 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 4 of 14 1203C041 1203C041

1 OF 1 (B/E) (Customer) Form NO.:S-ENG-0120-02 ADHESIVE COATING RUKUSRUKUS 0.2 10.Mar.1201 1 / 1 Rating label printing :black base white letter 460-032434-000V0 460-032434-000V0 CONFIDENTIAL UNDER NDA 1 OF 1 (B/E) (Customer) Form NO.:S-ENG-0120-02 ADHESIVE COATING RUKUSRUKUS 0.2 10.Mar.1201 1 / 1 Rating label printing :black base white letter 460-032404-000V0 460-032404-000V0 CONFIDENTIAL UNDER NDA RKS100 RK100

Neutron Engineering Inc. Project No.: 1203C041 Page 5 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 5 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 6 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 6 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 7 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 7 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 8 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 8 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 9 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 9 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 10 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 10 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 11 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 11 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 12 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 12 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 13 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 13 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 14 of 14 1203C041 1203C041 Neutron Engineering Inc. Project No.: 1203C041 Page 14 of 14 1203C041 1203C041

Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 1 of 123 FCC/IC Radio Test Report FCC ID: UZZRKS100 IC: 7633A-RKS100 This report concerns (check one) : Original Grant Class II Change Issued Date : Mar. 16, 2012 Project No. : 1203C041 Equipment : Portable Bluetooth Sound System Model Name : RKS100; RK100 Applicant : Beautiful Enterprise Co., Ltd. Address : 26th Floor, Beautiful Group Tower, 77 Connaught Road Central, Hong Kong Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Mar. 06, 2012 Date of Test: Mar. 06, 2012 ~ Mar. 15, 2012 Testing Engineer : (David Mao) Technical Manager : (Leo Heng) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 2 of 123 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutronshall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 3 of 123 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 21 4.2.4 DEVIATION FROM TEST STANDARD 21 4.2.5 TEST SETUP 22 4.2.6 EUT OPERATING CONDITIONS 23 4.2.7 TEST RESULTS (BELOW 30MHZ) 24 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 25 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 39 5 . NUMBER OF HOPPING CHANNEL 75 5.1 APPLIED PROCEDURES / LIMIT 75 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 75 5.1.2 TEST PROCEDURE 75 5.1.3 DEVIATION FROM STANDARD 75 5.1.4 TEST SETUP 75 5.1.5 EUT OPERATION CONDITIONS 75 Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 4 of 123 Table of Contents Page 5.1.6 TEST RESULTS 76 6 . AVERAGE TIME OF OCCUPANCY 78 6.1 APPLIED PROCEDURES / LIMIT 78 6.1.1 MEASUREMENT INSTRUMENTS LIST 78 6.1.2 TEST PROCEDURE 78 6.1.3 DEVIATION FROM STANDARD 78 6.1.4 TEST SETUP 79 6.1.5 EUT OPERATION CONDITIONS 79 6.1.6 TEST RESULTS 80 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 92 7.1 APPLIED PROCEDURES / LIMIT 92 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 92 7.1.2 TEST PROCEDURE 92 7.1.3 DEVIATION FROM STANDARD 92 7.1.4 TEST SETUP 92 7.1.5 EUT OPERATION CONDITIONS 92 7.1.6 TEST RESULTS 93 8 . BANDWIDTH TEST 97 8.1 APPLIED PROCEDURES / LIMIT 97 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 97 8.1.2 TEST PROCEDURE 97 8.1.3 DEVIATION FROM STANDARD 97 8.1.4 TEST SETUP 97 8.1.5 EUT OPERATION CONDITIONS 97 8.1.6 TEST RESULTS 98 9 . PEAK OUTPUT POWER TEST 102 9.1 APPLIED PROCEDURES / LIMIT 102 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 102 9.1.2 TEST PROCEDURE 102 9.1.3 DEVIATION FROM STANDARD 102 9.1.4 TEST SETUP 102 9.1.5 EUT OPERATION CONDITIONS 102 9.1.6 TEST RESULTS 103 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 107 10.1 APPLIED PROCEDURES / LIMIT 107 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 107 10.1.2 TEST PROCEDURE 107 10.1.3 DEVIATION FROM STANDARD 107 10.1.4 TEST SETUP 107 Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 5 of 123 Table of Contents Page 10.1.5 EUT OPERATION CONDITIONS 107 10.1.6 TEST RESULTS 108 11 . EUT TEST PHOTO 120 Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 6 of 123 1. CERTIFICATION E q u i p m e n t : Portable Bluetooth Sound System Brand Name : Model Name : RKS100; RK100 A p p l i c a n t : Beautiful Enterprise Co., Ltd. Factory : Shenzhen Synchron Electronics Co., Ltd. Address : No. 9 Mei Li Road, Xia Mei Lin, Fu Tian Area, Shenzhen, Guangdong, China Date of Test : Mar. 06, 2012 ~ Mar. 15, 2012 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2003 / ANSI C63.10:2009 / FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test r…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 120 of 123 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 120 of 123 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 121 of 123 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 121 of 123 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 122 of 123 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 122 of 123 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 123 of 123 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1203C041 Page 123 of 123 Radiated Measurement Photos Above 1000MHz