UZZSFQ01Hi Fi dock with Bluetooth wireless Audio system

Save this manual SFQ-01 / SFQ-01W The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Safety Information WARNINGS: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER or OPEN THE CABINET. Dangerous high voltages are present inside the enclosure. No user serviceable parts inside. Leave all servicing to qualified service personnel. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, l i q u i d h a s be e n s p i l l e d o r o b j e c t s h a v e fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall not be placed on the apparatus. 16. The mains plug is used as disconnect device and it shall remain readily operable during intended use. In order to disconnect the mains plug from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 17. The batteries (battery pack & batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. PORTABLE CART WARNING (Symbol provided by RETAC) For compatibility between the SFQ-01 system and another device with Bluetooth technology, consult the device's documentation and dealer. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. Bluetooth is a registered trademark of Bluetooth SIG, Inc Please read rating label at the bottom of system for power input and other safety information. FCC and IC Information: This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. l Consult the dealer or an experienced radio TV technician for help. Warnings: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and users can obtain Canadian information on RF exposure and compliance from the Canadian Representative Burnport Holdings Ltd. 72MT Belcher Pls, East, Calgary, Alberta, T2Z 2G1, CANADA. Tel: 403-257-4961 FCC&IC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the exemption from the routine evaluation limits in section 2.5 of RSS 102. 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters from user and bystanders. .1..2. Getting Started Packag…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Project No.: 1007C119 Page 2 of 18 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 3 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 3 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 4 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 4 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 5 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 5 of 18 1007C119 1007C119

SFQ-01 Rating label 21.Jul.2010 72.80 +0.00 -0.5 44.70 +0.00-0.5 2.79 2.79 (updated dim) (updated dim) 01Update serial no. printing content.21.Jul.2010 1 1 DWN/DATE NO.DATE REVISION RECORD CHK/DATE APP/DATEVER. 02 TITLE: DWG/NO.: MODEL NO.: Fo rm NO. :S -ENG-0119-01 LABEL FOR UNIT SFQ-01_01_002 SFQ-01 Rating label P/N:460-032294-000V0 DATE CODE LABEL P/N:460-041763-001X0 DATE CODE LABEL P/N:460-041763-001X0 Serial No.:100700001 Serial No.:100700001 日期“年＂（10=2010，11=2011，12=2012...) 日期“月＂（07=7月,08=8月......) 流水號（注意流水號每月從#00001開始) 此Label為空白，需要生產部按照要求自己打印.

Neutron Engineering Inc. Project No.: 1007C119 Page 6 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 6 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 7 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 7 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 8 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 8 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 9 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 9 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 10 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 10 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 11 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 11 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 12 of 18 1007C119 1007 C119 Neutron Engineering Inc. Project No.: 1007C119 Page 12 of 18 1007C119 1007 C119 Neutron Engineering Inc. Project No.: 1007C119 Page 13 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 13 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 14 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 14 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 15 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 15 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 16 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 16 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 17 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 17 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 18 of 18 1007C119 1007C119 Neutron Engineering Inc. Project No.: 1007C119 Page 18 of 18 1007C119 1007C119

Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 2 of 107 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 3 of 107 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 12 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 16 4.1.7 TEST RESULTS 17 4.2 RADIATED EMISSION MEASUREMENT 25 4.2.1 RADIATED EMISSION LIMITS 25 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 26 4.2.3 TEST PROCEDURE 27 4.2.4 DEVIATION FROM TEST STANDARD 27 4.2.5 TEST SETUP 28 4.2.6 EUT OPERATING CONDITIONS 29 4.2.7 TEST RESULTS (BETWEEN 30 – 1000 MHZ) 30 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 34 5 . NUMBER OF HOPPING CHANNEL 64 5.1 APPLIED PROCEDURES / LIMIT 64 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 64 5.1.2 TEST PROCEDURE 64 5.1.3 DEVIATION FROM STANDARD 64 5.1.4 TEST SETUP 64 5.1.5 EUT OPERATION CONDITIONS 64 5.1.6 TEST RESULTS 65 Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 4 of 107 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 67 6.1 APPLIED PROCEDURES / LIMIT 67 6.1.1 MEASUREMENT INSTRUMENTS LIST 67 6.1.2 TEST PROCEDURE 67 6.1.3 DEVIATION FROM STANDARD 67 6.1.4 TEST SETUP 68 6.1.5 EUT OPERATION CONDITIONS 68 6.1.6 TEST RESULTS 69 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 81 7.1 APPLIED PROCEDURES / LIMIT 81 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 81 7.1.2 TEST PROCEDURE 81 7.1.3 DEVIATION FROM STANDARD 81 7.1.4 TEST SETUP 81 7.1.5 EUT OPERATION CONDITIONS 81 7.1.6 TEST RESULTS 82 8 . BANDWIDTH TEST 86 8.1 APPLIED PROCEDURES / LIMIT 86 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 86 8.1.2 TEST PROCEDURE 86 8.1.3 DEVIATION FROM STANDARD 86 8.1.4 TEST SETUP 86 8.1.5 EUT OPERATION CONDITIONS 86 8.1.6 TEST RESULTS 87 9 . PEAK OUTPUT POWER TEST 91 9.1 APPLIED PROCEDURES / LIMIT 91 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 91 9.1.2 TEST PROCEDURE 91 9.1.3 DEVIATION FROM STANDARD 91 9.1.4 TEST SETUP 91 9.1.5 EUT OPERATION CONDITIONS 91 9.1.6 TEST RESULTS 92 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 96 10.1 APPLIED PROCEDURES / LIMIT 96 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 96 10.1.2 TEST PROCEDURE 96 10.1.3 DEVIATION FROM STANDARD 96 10.1.4 TEST SETUP 97 10.1.5 EUT OPERATION CONDITIONS 97 Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 5 of 107 Table of Contents Page 10.1.6 TEST RESULTS 98 11 . RF EXPOSURE TEST 102 11.1 APPLIED PROCEDURES / LIMIT 102 11.1.1 MEASUREMENT INSTRUMENTS LIST 102 11.1.2 MPE CALCULATION METHOD 103 11.1.3 DEVIATION FROM STANDARD 103 11.1.4 TEST SETUP 103 11.1.5 EUT OPERATION CONDITIONS 103 11.1.6 TEST RESULTS 104 12 . EUT TEST PHOTO 105 Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 6 of 107 1. CERTIFICATION E q u i p m e n t : Hi Fi dock with bluetooth wireless Audio system Brand Name : N/A Model Name : SFQ-01 A p p l i c a n t : Beautiful Enterprise Co., Ltd Factory : Shenzhen Synchron Electronics Co.,Ltd Address : No. 9 Mei Li Road, Xia Mei Lin, Fu Tian Area, Shenzhen, China Date of Test: Jul. 13, 2010 ~ Jul. 19, 2010 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / Canada RSS-210:2007 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-1-1007C119) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 7 of 107 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: APPLIED STANDARD: 47 CFR Part 15, Subpart C; Canada RSS-210:2007 Standard Section RSS-210 47 CFR Part 15 Test Item Judgment Remark RSS-GEN 7.2.2 15.207 Conducted Emission PASS RSS-210 Annex 8 (A8.1d) 15.247 (c) Antenna conducted Spurious EmissionPASS RSS-210 Annex 8 (A8.1d) 15.247 …

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 101 of 103 12. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 101 of 103 12. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 102 of 103 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 102 of 103 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 103 of 103 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1007C119 Page 103 of 103 Radiated Measurement Photos Above 1000MHz