UZZSFQ02Sound Step Audio Docking System

SFQ-02RB Sound Step 16 Mar 2011 Safety Information WARNINGS: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER or OPEN THE CABINET. Dangerous high voltages are present inside the enclosure. No user serviceable parts inside. Leave all servicing to qualified service personnel. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objec ts have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall not be placed on the apparatus. 16. The mains plug is used as disconnect device and it shall remain readily operable during intended use. In order to disconnect the mains plug from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 17. The batteries (battery pack & batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. 18. Do not place any naked flame sources, such as lighted candles, on the apparatus. 19. The battery used in this product must be properly recycled or disposed of. Please co n t a c t yo u r l o c a l re c yc l i n g ce n te r fo r p ro p e r b a t te r y h a n d l i n g a n d d i s p o s a l instructions. For compatibility between the SFQ-02/02RB system and another device with Bluetooth technology, consult the device's documentation and dealer. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. Bluetooth is a registered trademark of Bluetooth SIG, Inc Please read rating label at the bottom of system for power input and other safety information. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7 . Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protec t the power cord from being walked on or pinched par ticularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. PORTABLE CART WARNING (Symbol provided by RETAC) FCC and IC Information: This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warnings: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and users can obtain Canadian information on RF exposure and compliance from the Canadian Representative Burnport Holdings Ltd. 72MT Belcher Pls, East, Calgary, Alberta, T2Z 2G1, CANADA. Tel: 403-257-4961 FCC&IC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the exemption from the routine evaluation limits in section 2.5 of RSS 102. 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters from user and bystanders. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate t…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Project No.: 1102C111 Page 2 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 2 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 3 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 3 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 4 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 4 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 5 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 5 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 6 of 23 1102C111 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 6 of 23 1102C111 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 7 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 7 of 23 1102C111 1102C111

Neutron Engineering Inc. Project No.: 1102C111 Page 8 of 23 1102C1111102C1111102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 9 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 9 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 10 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 10 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 11 of 23 1102C111 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 11 of 23 1102C111 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 12 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 12 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 13 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 13 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 14 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 14 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 15 of 23 1102C111 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 15 of 23 1102C111 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 15 of 23 1102C111 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 16 of 23 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 17 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 17 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 18 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 18 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 19 of 23 1102C111 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 19 of 23 1102C111 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 20 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 20 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 21 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 21 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 22 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 22 of 23 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 23 of 23 1102C111 1102C111 1102C111 1102C111 Neutron Engineering Inc. Project No.: 1102C111 Page 23 of 23 1102C111 1102C111 1102C111 1102C111

Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 2 of 108 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 3 of 108 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BELOW 30MHZ) 23 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 24 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 28 5 . NUMBER OF HOPPING CHANNEL 58 5.1 APPLIED PROCEDURES / LIMIT 58 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 58 5.1.2 TEST PROCEDURE 58 5.1.3 DEVIATION FROM STANDARD 58 5.1.4 TEST SETUP 58 5.1.5 EUT OPERATION CONDITIONS 58 Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 4 of 108 Table of Contents Page 5.1.6 TEST RESULTS 59 6 . AVERAGE TIME OF OCCUPANCY 61 6.1 APPLIED PROCEDURES / LIMIT 61 6.1.1 MEASUREMENT INSTRUMENTS LIST 61 6.1.2 TEST PROCEDURE 61 6.1.3 DEVIATION FROM STANDARD 61 6.1.4 TEST SETUP 62 6.1.5 EUT OPERATION CONDITIONS 62 6.1.6 TEST RESULTS 63 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 75 7.1 APPLIED PROCEDURES / LIMIT 75 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 75 7.1.2 TEST PROCEDURE 75 7.1.3 DEVIATION FROM STANDARD 75 7.1.4 TEST SETUP 75 7.1.5 EUT OPERATION CONDITIONS 75 7.1.6 TEST RESULTS 76 8 . BANDWIDTH TEST 80 8.1 APPLIED PROCEDURES / LIMIT 80 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 80 8.1.2 TEST PROCEDURE 80 8.1.3 DEVIATION FROM STANDARD 80 8.1.4 TEST SETUP 80 8.1.5 EUT OPERATION CONDITIONS 80 8.1.6 TEST RESULTS 81 9 . PEAK OUTPUT POWER TEST 85 9.1 APPLIED PROCEDURES / LIMIT 85 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 85 9.1.2 TEST PROCEDURE 85 9.1.3 DEVIATION FROM STANDARD 85 9.1.4 TEST SETUP 85 9.1.5 EUT OPERATION CONDITIONS 85 9.1.6 TEST RESULTS 86 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 90 10.1 APPLIED PROCEDURES / LIMIT 90 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 90 10.1.2 TEST PROCEDURE 90 10.1.3 DEVIATION FROM STANDARD 90 10.1.4 TEST SETUP 90 Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 5 of 108 Table of Contents Page 10.1.5 EUT OPERATION CONDITIONS 90 10.1.6 TEST RESULTS 91 11 . RF EXPOSURE TEST 103 11.1 APPLIED PROCEDURES / LIMIT 103 11.1.1 MPE CALCULATION METHOD 103 11.1.2 DEVIATION FROM STANDARD 103 11.1.3 EUT OPERATION CONDITIONS 103 11.1.4 TEST RESULTS 104 12 . EUT TEST PHOTO 105 Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 6 of 108 1. CERTIFICATION E q u i p m e n t : Sound Step Audio Docking System Brand Name : Model Name : SFQ-02RB; SFQ-02 A p p l i c a n t : Beautiful Enterprise Co., Ltd Factory : Shenzhen Synchron Electronics Co., Ltd. Address : No.9 Mei Li Road, xia Mei Lin, Fu Tian Area, Shenzhen, China Date of Test : Mar. 07, 2011~ Mar. 15, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2003 / Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-1-1102C111) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 7 of 108 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: APPLIED STANDARD: 47 CFR Part 15, Subpart C; Canada RSS-210:2010 Standard Section RSS-210 47 CFR Part 15 Test Item Judgment Remark RSS-GEN 7.2.2 15.207 Conducted Emission PASS RSS-210 Annex 8 (A8.1d) 15.247(d)Antenna conducted Spurious EmissionPASS RSS-210 Annex 8 (A8.1d) 15.247 (a)(1) Hopping Chan…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 105 of 108 12. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 105 of 108 12. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 106 of 108 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 106 of 108 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 107 of 108 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 107 of 108 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 108 of 108 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1102C111 Page 108 of 108 Radiated Measurement Photos Above 1000MHz