UZZSFQ05Sound Rise Wireless Speaker with Alarm Clock

SFQ-05 Sound Rise Wireless Speaker with Alarm Clock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Safety Information WARNINGS: .1. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER or OPEN THE CABINET. Dangerous high voltages are present inside the enclosure. No user serviceable parts inside. Leave all servicing to qualified service personnel. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vase,shall not be placed on the apparatus. 16. The mains plug is used as disconnect device and it shall remain readily operable during intended use. In order to disconnect the mains plug from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 17. The batteries (battery pack & batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. PORTABLE CART WARNING (Symbol provided by RETAC) .2.  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio TV technician for help. Warnings: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and users can obtain Canadian information on RF exposure and compliance from the Canadian Representative Burnport Holdings Ltd. 72MT Belcher Pls, East, Calgary, Alberta, T2Z 2G1, CANADA. Tel: 403-257-4961 FCC&IC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the exemption from the routine evaluation limits in section 2.5 of RSS 102. 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters from user and bystanders. For compatibility between the SFQ-05 system and another device with Bluetooth technology, consult the device's documentation and dealer. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. is a registered trademark of Bluetooth SIG, Inc Please read rating label at the bottom of system for power input and other safety information. 18. Do not place any naked flame sources, such as lighted candles, on the apparatus. 19. The battery used in this product must be properly recycled or disposed of. Please contact your local recycling center for proper battery handling and disposal instructions. FCC and IC Information: This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canada IC statments Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limi…

Text truncated - open the document above for the full version.

Beautiful Enterprise Co., Ltd. 26 th Floor, Beautiful Group Tower, Tel: 852-23270195 77 Connaught Road Central, Hong Kong Fax: 852-23523380 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Beautiful Enterprise Co., Ltd would like the following documents regarding this submission for FCC ID: UZZSFQ05 to be kept confidential. 1. Schematic 2. Block diagram 3. Circuit description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Name: John Liao Title: Product Approbation Supervisor July 23, 2012

Beautiful Enterprise Co., Ltd. 26 th Floor, Beautiful Group Tower, Tel: 852-23270195 77 Connaught Road Central, Hong Kong Fax: 852-23523380 July 23, 2012 To whom it may concern: We the undersigned, hereby authorize EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Beautiful Enterprise Co., Ltd. Sincerely, Signature :............................. Name: John Liao Title: Product Approbation Supervisor

Neutron Engineering Inc. Project No.: 1207C117 Page 2 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 2 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 3 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 3 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 4 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 4 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 5 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 5 of 19 1207C117 1207C117

1 OF 1 2012.8.14 01 (B/E) (Customer) F o r m N O . : S -ENG-0120- 0 2 CONFIDENTIAL UNDER NDA Rating label 460-032462-000V0 460-032462-000V0 SFQ-05BSFQ-05B PC PC T=0.3mm Printing : BLACK 73 +0.00 -0.5 45 +0.00-0.5 4.2 4.2 Neutron Engineering Inc. Project No.: 1207C117 Page 3 of 19 1207C117 1207C117

Neutron Engineering Inc. Project No.: 1207C117 Page 6 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 6 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 7 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 7 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 8 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 8 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 9 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 9 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 10 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 10 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 11 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 11 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 12 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 12 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 13 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 13 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 14 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 14 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 15 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 15 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 16 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 16 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 17 of 19 1207C117 1207C117 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 17 of 19 1207C117 1207C117 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 18 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 18 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 19 of 19 1207C117 1207C117 Neutron Engineering Inc. Project No.: 1207C117 Page 19 of 19 1207C117 1207C117

Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 1 of 133 FCC/IC Radio Test Report FCC ID: UZZSFQ05 IC: 7633A-SFQ05 This report concerns (check one) : Original Grant Class II Change Issued Date : Jul. 30, 2012 Project No. : 1207C117 Equipment : Wireless Speaker with Alarm Clock Model Name : SFQ-05 Applicant : Beautiful Enterprise Co., Ltd. Address : 26th Floor, Beautiful Group Tower, 77 Connaught Road Central, Hong Kong Manufacturer : Beautiful Enterprise Co., Ltd. Address : 26th Floor, Beautiful Group Tower, 77 Connaught Road Central, Hong Kong Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Jul.20, 2012 Date of Test: Jul. 20, 2012 ~ Jul. 29, 2012 Testing Engineer : (David Mao) Technical Manager : (Leo Heng) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 2 of 133 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 3 of 133 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BELOW 30MHZ) 23 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 24 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 48 5 . NUMBER OF HOPPING CHANNEL 84 5.1 APPLIED PROCEDURES / LIMIT 84 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 84 5.1.2 TEST PROCEDURE 84 5.1.3 DEVIATION FROM STANDARD 84 5.1.4 TEST SETUP 84 5.1.5 EUT OPERATION CONDITIONS 84 5.1.6 TEST RESULTS 85 Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 4 of 133 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 87 6.1 APPLIED PROCEDURES / LIMIT 87 6.1.1 MEASUREMENT INSTRUMENTS LIST 87 6.1.2 TEST PROCEDURE 87 6.1.3 DEVIATION FROM STANDARD 87 6.1.4 TEST SETUP 88 6.1.5 EUT OPERATION CONDITIONS 88 6.1.6 TEST RESULTS 89 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 101 7.1 APPLIED PROCEDURES / LIMIT 101 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 101 7.1.2 TEST PROCEDURE 101 7.1.3 DEVIATION FROM STANDARD 101 7.1.4 TEST SETUP 101 7.1.5 EUT OPERATION CONDITIONS 101 7.1.6 TEST RESULTS 102 8 . BANDWIDTH TEST 106 8.1 APPLIED PROCEDURES / LIMIT 106 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 106 8.1.2 TEST PROCEDURE 106 8.1.3 DEVIATION FROM STANDARD 106 8.1.4 TEST SETUP 106 8.1.5 EUT OPERATION CONDITIONS 106 8.1.6 TEST RESULTS 107 9 . PEAK OUTPUT POWER TEST 112 9.1 APPLIED PROCEDURES / LIMIT 112 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 112 9.1.2 TEST PROCEDURE 112 9.1.3 DEVIATION FROM STANDARD 112 9.1.4 TEST SETUP 112 9.1.5 EUT OPERATION CONDITIONS 112 9.1.6 TEST RESULTS 113 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 117 10.1 APPLIED PROCEDURES / LIMIT 117 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 117 10.1.2 TEST PROCEDURE 117 10.1.3 DEVIATION FROM STANDARD 117 10.1.4 TEST SETUP 117 10.1.5 EUT OPERATION CONDITIONS 117 10.1.6 TEST RESULTS 118 Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 5 of 133 Table of Contents Page 11 . EUT TEST PHOTO 130 Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 6 of 133 1. CERTIFICATION Equipment : Wireless Speaker with Alarm Clock Brand Name : Model Name : SFQ-05 Applicant : Beautiful Enterprise Co., Ltd. Factory : Shenzhen Synchron Electronics Co., Ltd. Address : No. 9 Mei Li Road, Xia Mei Lin, Fu Tian Area, Shenzhen, Guangdong, China Date of Test : Jul. 20, 2012 ~ Jul. 29, 2012 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Labora…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 129 of 132 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 129 of 132 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 130 of 132 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 130 of 132 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 131 of 132 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 131 of 132 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 132 of 132 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1207C117 Page 132 of 132 Radiated Measurement Photos Above 1000MHz