UZZSFQ08Sound Rise

Sound Rise SFQ-08 User Manual 2 Safety Information IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. PORTABLE CART WARNING (Symbol provided by RETAC) 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vase, shall not be placed on the apparatus. 16. The mains plug is used as disconnect device and it shall remain readily operable during intended use. In order to disconnect the mains plug from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 17. The batteries (battery pack & batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNINGS: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.  DO NOT REMOVE COVER or OPEN THE CABINET. Dangerous high voltages are present inside the enclosure. No user serviceable parts inside. Leave all servicing to qualified service personnel. 3 18. Do not place any naked flame sources, such as lighted candles, on the apparatus. 19. The battery used in this product must be properly recycled or disposed of. Please contact your local recycling center for proper battery handling and disposal instructions. FCC and IC Information: This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canada IC statments Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: y Reorient or relocate the receiving antenna. y Increase the separation between the equipment and receiver. y Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. y Consult the dealer or an experienced radio TV technician for help. Warnings: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and users can obtain Canadian information on RF exposure and compliance from the Canadian Representative Burnport Holdings Ltd. 72MT Belcher Pls, East, Calgary, Alberta, T2Z 2G1, CANADA. Tel: 403-257-4961 FCC&IC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the exemption from the routine evaluation limits in section 2.5 of RSS 102. 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or tran…

Text truncated - open the document above for the full version.

Beautiful Enterprise Co., Ltd. 27 th Floor, Beautiful Group Tower, Tel: 852-23270195 77 Connaught Road Central, Hong Kong Fax: 852-23523380 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. Beautiful Enterprise Co., Ltd would like the following documents regarding this submission for FCC ID: UZZSFQ08 to be kept confidential. 1. Schematic 2. Block diagram 3. Circuit description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Name: John Liao Title: Product Approbation Supervisor Nov 04, 2013

Beautiful Enterprise Co., Ltd. 27 th Floor, Beautiful Group Tower, Tel: 852-23270195 77 Connaught Road Central, Hong Kong Fax: 852-23523380 Nov 08, 2013 To whom it may concern: We the undersigned, hereby authorize EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EMCCert DR. RAŠEK GmbH and Neutron Engineering, Inc. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Beautiful Enterprise Co., Ltd. Sincerely, Signature :............................. Name: John Liao Title: Product Approbation Supervisor

Neutron Engineering Inc. Project No.: 1310C159 Page 2 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 3 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 4 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 5 of 15

CR2025 52.9 mm 95.5 mm Bottom view for SFQ-08 SFQ-08 Rating Label 20131112 Label location labellocation

Neutron Engineering Inc. Project No.: 1310C159 Page 6 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 7 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 8 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 9 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 10 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 11 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 12 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 13 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 14 of 15 Neutron Engineering Inc. Project No.: 1310C159 Page 15 of 15

Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C159 Page 1 of 125 FCC&IC Radio Test Report FCC ID: UZZSFQ08 IC: 7633A-SFQ08 This report concerns (check one) : Original Grant Class II Change Issued Date : Nov. 14, 2013 Project No. : 1310C159 Equipment : Sound Rise Model Name SFQ-08 Applicant : Beautiful Enterprise Co., Ltd. Address : 27th Floor, Beautiful Group Tower, 77 Connaught Road Central, Hong Kong Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Oct. 28, 2013 Date of Test: Oct. 28, 2013 ~ Nov. 13, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL: 0769-8318-3000 FAX: 0769-8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C159 Page 2 of 125 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C159 Page 3 of 125 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 21 4.2.1 RADIATED EMISSION LIMITS 21 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 22 4.2.3 TEST PROCEDURE 23 4.2.4 DEVIATION FROM TEST STANDARD 23 4.2.5 TEST SETUP 24 4.2.6 EUT OPERATING CONDITIONS 25 4.2.7 TEST RESULTS (BELOW 30MHZ) 26 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 27 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 52 5 . NUMBER OF HOPPING CHANNEL 76 5.1 APPLIED PROCEDURES / LIMIT 76 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 76 5.1.2 TEST PROCEDURE 76 5.1.3 DEVIATION FROM STANDARD 76 5.1.4 TEST SETUP 76 5.1.5 EUT OPERATION CONDITIONS 76 5.1.6 TEST RESULTS 77 6 . AVERAGE TIME OF OCCUPANCY 79 Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C159 Page 4 of 125 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 79 6.1.1 MEASUREMENT INSTRUMENTS LIST 79 6.1.2 TEST PROCEDURE 79 6.1.3 DEVIATION FROM STANDARD 79 6.1.4 TEST SETUP 80 6.1.5 EUT OPERATION CONDITIONS 80 6.1.6 TEST RESULTS 81 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 93 7.1 APPLIED PROCEDURES / LIMIT 93 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 93 7.1.2 TEST PROCEDURE 93 7.1.3 DEVIATION FROM STANDARD 93 7.1.4 TEST SETUP 93 7.1.5 EUT OPERATION CONDITIONS 93 7.1.6 TEST RESULTS 94 8 . BANDWIDTH TEST 98 8.1 APPLIED PROCEDURES / LIMIT 98 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 98 8.1.2 TEST PROCEDURE 98 8.1.3 DEVIATION FROM STANDARD 98 8.1.4 TEST SETUP 98 8.1.5 EUT OPERATION CONDITIONS 98 8.1.6 TEST RESULTS 99 9 . PEAK OUTPUT POWER TEST 103 9.1 APPLIED PROCEDURES / LIMIT 103 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 103 9.1.2 TEST PROCEDURE 103 9.1.3 DEVIATION FROM STANDARD 103 9.1.4 TEST SETUP 103 9.1.5 EUT OPERATION CONDITIONS 103 9.1.6 TEST RESULTS 104 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 108 10.1 APPLIED PROCEDURES / LIMIT 108 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 108 10.1.2 TEST PROCEDURE 108 10.1.3 DEVIATION FROM STANDARD 108 10.1.4 TEST SETUP 108 10.1.5 EUT OPERATION CONDITIONS 108 10.1.6 TEST RESULTS 109 11 . EUT TEST PHOTO 121 Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C159 Page 5 of 125 REPORT ISSUED HISTORY Issued No. Description Issued Date NEI-FICP-1-1310C159 Original Issue. Nov. 14, 2013 - - - Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C159 Page 6 of 125 1. CERTIFICATION Equipment : Sound Rise Brand Name : Model Name SFQ-08 Applicant : Beautiful Enterprise Co., Ltd. Manufacture : Beautiful Enterprise Co., Ltd. Address : 27th Floor, Beautiful Group Tower, 77 Connaught Road Central, Hong Kong Factory : Shenzhen Synchron Electronics Co., Ltd. Address : No. 9 Mei Li Road, Xia Mei Lin, Fu Tian Area, Shenzhen, Guangdong, China Date of Test : Oct. 28, 2013 ~ Nov. 13, 2013 Test Item : ENGINEERING SAMPLE Standard(s) : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 RSS-GEN Issue 3, Dec 2010 The above equipment has been tested and found compliance with the requirement of the relative st…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C159 Page 121 of 125 11. EUT TEST PHOTO Conducted Measurement Photos Adapter: NSA15EU-075200 Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C159 Page 122 of 125 Conducted Measurement Photos Adapter: S018KM0900200 Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C159 Page 123 of 125 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C159 Page 124 of 125 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C159 Page 125 of 125 Radiated Measurement Photos Above 1000MHz