V9X-NK24Y2.4G Transceiver module

OPERATION GUIDE OG_NK24Y_v08eCircuit Design, Inc. 11 Regulatory compliance information Regulatory Statement for FCC Instructions to the final system integrators The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module. This module should be installed in the host device according to the interface specification. Labeling FCC ID:V9X-NK24Y The proposed FCC ID label format is to be placed on the module. If FCC ID is not visible when the module is installed into the system, “Contains FCC ID: V9X-NK24Y shall be placed on the outside of final host system. The following information must be indicated on the host device of this module. *If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual. The following statements or equivalent must be described on the user manual of the host device of this module; This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for product compliance could void the user's authority to operate the equipment. Caution: Exposure to radio frequency radiation This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption rate(SAR). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. OPERATION GUIDE OG_NK24Y_v08eCircuit Design, Inc. 12 Regulatory Statement for IC Instructions to the final system integrators The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module. This module should be installed in the host device according to the interface specification. Labeling: IC Number: 6079A-NK24Y The proposed IC Number label format is to be placed on the module. If IC Number is not visible when the module is installed into the system, “Contains IC: 6079A-NK24Y” shall be placed on the outside of final h ost system. The following statements or equivalent must be described on the user manual of the host device of this module; Antenna This radio transmitter IC Number 6079A-NK24Y has been approved by Industry Canada to operate withthe antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. The antenna used this module is as follows; Antenna Type & Antenna Gain; Sleeve Antenna (ANT-2G4S2/ANT-2G4S3) 2.14 dBi Pattern antenna -2.0 dBi Caution: Exposure to Radio Frequency Radiation This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption rate (SAR). Cetéquipement est conforme aux limites d’ exposition aux rayonnementsénoncées pour un environnement non contrôléet respecte les règles d’ exposition aux fréquences radioélectriques (RF) CNR-102 de l’ IC. Cetéquipementémet uneénergie RF très faible qui est considérée conforme sansévaluation du débit d’ absorption spécifique (DAS). This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Photo Circuit Design, Inc. NK-2.4Y With Antenna (ANT-2G4S3) With Antenna (ANT-2G4S2) Photo Circuit Design, Inc. NK-2.4Y

Label Location

㻺㻷㻙㻞㻚㻠㼅 㻹㼛㼐㼑㼘䠖 㻖㻖㻖㻙㻖㻖㻖㻖㻖㻖 㻵㻯䠖㻌㻖㻖㻖㻖㻖㻖㻖㻖㻖㻖㻖㻖 㻲㻯㻯㻌㻵㻰㻦㻌㻖㻖㻖㻖㻖㻖㻖㻖㻖㻖 㻿㻛㻺㼛㻦㻌㻜㻜㻜㻜㻜㻜㻜㻜 㻹㻭㻰㻱㻌㻵㻺㻌㻶㻭㻼㻭㻺 䣔       5     ᵏ ᵐ ᵑ ᵒ ᵓ [ [ [ ᵟ ᵠ ᵡ ᵓ ᵒ ᵑ ᵐ ᵏ ᵟᵠᵡ MARK DATEMEMO CH. AP. COMMERCIAL TOLERANCE SCALE MATERIAL FINISHEDCHECK DRAWN DESIGN APPROV. NAME CODE NO. DATE DRAWING NO. s s s 㹼 㹼 㹼 ڹ ڹ ڹ ᵢ SPEC. 㒊ရྡ䢿䣐䣃䣏䣇凚ᅗ㠃ྡ凛䢭䣕䣒䣇䣅䢰凚௙ᵝ凛 㹼 s ڹ [ WR. 䣒 䣆 䣈 䢴䢼䢳 S.Tanaka S.Tanaka 䢴䢲䢳䢷䢰䢲䢷䢰䢴䢻 䣕䣇䣔䣋䣃䣎䢢䣎䣃䣄䣇䣎 䢳䢶䢯䢲䢲䢴䢻 䣐䣍䢯䢴䢰䢶䣛 䢲䢲䢲䢲䢲 V9X-NK24Y 6079A-NK24Y

Photo Circuit Design, Inc. NK-2.4Y

UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone: +81 463 50 6400 Facsimile: +81 463 50 6401 June 11, 2015 UL Japan, Inc. 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan FCC ID: V9X-NK24Y To whom it may concern, We, UL Japan, Inc., hereby declare that 2.4G Transceiver module, model : NK-2.4Y (FCC ID: V9X-NK24Y) of Circuit Design, Inc is exempt from RF exposure SAR evaluation as its output power meets the exclusion limits stated in FCC Part 2 §2.1093. KDB 447498D01(v05r02) has the following exclusion for portable devices: The 1g and 10g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances < 50 mm are determined by: [(measured maximum average output power(mW))/(Minimum separation distance(mm))]•[ √ f (GHz)] < 3.0 for 1g SAR and < 7.5 for 10g extremity SAR where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is < 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. This device f = 2.48 GHz, distance = 5mm (minimum separation distance: 5 mm was used in the calculation) and the measured maximum average output power was 1 mW So for this device: 1 mW [measured maximum average output power] / 5 mm [minimum separation distance] * ( √ 2.48) = 0.3 *This is less than 3.0, so no SAR is required. Even taking into account the tolerance, this device can be satisfied with the limits. Thank you for your attention to this matter. Akio Hayashi Leader Consumer Technology Division UL Japan, Inc.

Test report No. : 10726974S-A Page : 1 of 56 Issued date : June 11, 2015 Revised date : June 25, 2015 FCC ID : V9X-NK24Y UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 13-EM-F0429 RADIO TEST REPORT Test Report No. : 10726974S-A Applicant : Circuit Design, Inc Type of Equipment : 2.4G Transceiver module Model No. : NK-2.4Y FCC ID : V9X-NK24Y Test regulation: FCC Part 15 Subpart C: 2015 Test Result : Complied 1. This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the above regulation. 4. The test results in this report are traceable to the national or international standards. 5. The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan has been accredited. 6. This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable) Date of test: May 11 to 17, 2015 Representative test engineer: Shinichi Takano Engineer Consumer Technology Division Approved by: Tatsuya Arai Engineer Consumer Technology Division RTL02610 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan. There is no testing item of "Non-accreditation". Test report No. : 10726974S-A Page : 2 of 56 Issued date : June 11, 2015 Revised date : June 25, 2015 FCC ID : V9X-NK24Y UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 REVISION HISTORY Original Test Report No.: 10726974S-A Revision Test report No. Date Page revised Contents - (Original) 10726974S-A June 11, 2015 - - 1 10726974S-A June 18, 2015 4, 9 Correction of Rating 2 10726974S-A June 23, 2015 3,4, 5,15,16 44 Correction of erroneous description Addition of comment 3 10726974S-A June 25, 2015 4 Correction of Antenna RF Cable length Test report No. : 10726974S-A Page : 3 of 56 Issued date : June 11, 2015 Revised date : June 23, 2015 FCC ID : V9X-NK24Y UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 CONTENTS PAGE SECTION 1: Customer information ....................................................................................................... 4 SECTION 2: Equipment under test (E.U.T.) ......................................................................................... 4 SECTION 3: Test specification, procedures & results .......................................................................... 5 SECTION 4: Operation of E.U.T. during testing .................................................................................. 8 SECTION 5: Conducted Emission ........................................................................................................ 10 SECTION 6: Radiated Spurious Emission .......................................................................................... 11 SECTION 7: Antenna Terminal Conducted Tests .............................................................................. 12 APPENDIX 1: Test data ........................................................................................................................ 13 Conducted Emission ......................................................................................................................... 13 20dB Bandwidth and Carrier Frequency Separation ......................................................................... 19 Number of Hopping Frequency ........................................................................................................ 22 Dwell time ......................................................................................................................................... 24 Maximum Peak Output Power .......................................................................................................... 26 Average Output Power ...................................................................................................................... 27 Radiated Spurious Emission ............................................................................................................. 28 Conducted Spurious Emission .......................................................................................................... 40 Conducted Emission Band Edge compliance ................................................................................... 43 99%Occupied Bandwidth ................................................................................................................. 45 APPENDIX 2: Test instruments ........................................................................................................... 47 APPENDIX 3: Photographs of test setup ............................................................................................. 49 Conducted Emission(Antenna : ANT-2G4S2) .................................................................................. 49 Conducted Emission(Antenna : ANT-2G4S3) .................................................................................. 50 Conducted Emission(Antenna : Pattern antenna) .............................................................................. 51 Radiated Spurious Emission(Antenna : ANT-2G4S2) ...................................................................... 52 Radiated Spurious Emission(Antenna : ANT-2G4S3) ...................................................................... 53 Radiated Spurious Emission(Antenna : Pattern antenna) ................................................................. 54 Worst Case Position ..........................................................................…

Text truncated - open the document above for the full version.

Test report No. : 10726974S-A Page : 49 of 56 Issued date : June 11, 2015 FCC ID : V9X-NK24Y UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 APPENDIX 3: Photographs of test setup Conducted Emission(Antenna : ANT-2G4S2) Photo 1 Photo 2 Test report No. : 10726974S-A Page : 50 of 56 Issued date : June 11, 2015 FCC ID : V9X-NK24Y UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Conducted Emission(Antenna : ANT-2G4S3) Photo 1 Photo 2 Test report No. : 10726974S-A Page : 51 of 56 Issued date : June 11, 2015 FCC ID : V9X-NK24Y UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Conducted Emission(Antenna : Pattern antenna) Photo 1 Photo 2 Test report No. : 10726974S-A Page : 52 of 56 Issued date : June 11, 2015 FCC ID : V9X-NK24Y UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Radiated Spurious Emission(Antenna : ANT-2G4S2) Front view Rear view (below 1GHz) Rear view (above 1GHz) Test report No. : 10726974S-A Page : 53 of 56 Issued date : June 11, 2015 FCC ID : V9X-NK24Y UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Radiated Spurious Emission(Antenna : ANT-2G4S3) Front view Rear view (below 1GHz) Rear view (above 1GHz) Test report No. : 10726974S-A Page : 54 of 56 Issued date : June 11, 2015 FCC ID : V9X-NK24Y UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Radiated Spurious Emission(Antenna : Pattern antenna) Front view Rear view (below 1GHz) Rear view (above 1GHz) Test report No. : 10726974S-A Page : 55 of 56 Issued date : June 11, 2015 FCC ID : V9X-NK24Y UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Worst Case Position Module / Pattern Antenna X-axis Y-axis Z-axis Test report No. : 10726974S-A Page : 56 of 56 Issued date : June 11, 2015 FCC ID : V9X-NK24Y UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Antenna(ANT-2G4S2) Antenna(ANT-2G4S3) X-axis X-axis Y-axis Y-axis End of Report