VG5WIN7023WiMax Transceiver; Compact Base Station (cBST)

RuggedMAX™ WiN7000 High Power Base Station Installation Guide Revision 1.1 - November 3, 2011 www.ruggedcom.com RuggedMAX™ WiN7000 High Power Base Station RuggedMAX™ WiN7000 High Power Base Station: Installation Guide Copyright © 2011 RuggedCom Inc. All Rights Reserved Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized except where expressly permitted. Violations are liable for damages. All rights are reserved, particularly for the purposes of patent application or trademark registration. This document contains proprietary information, which is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of RuggedCom Inc. Disclaimer Of Liability We have checked the contents of this manual against the hardware and software described. However, deviations from the description cannot be completely ruled out. RuggedCom shall not be liable for any errors or omissions contained herein or for consequential damages in connection with the furnishing, performance, or use of this material. The information given in this document is reviewed regularly and any necessary corrections will be included in subsequent editions. We appreciate any suggested improvements. We reserve the right to make technical improvements without notice. Registered Trademarks ROX™, RuggedRated™, eRSTP™, RuggedBackbone™, and RuggedMAX™ are trademarks of RuggedCom Inc. RuggedRouter® is a registered trademark of RuggedCom Inc. Other designations in this manual might be trademarks whose use by third parties for their own purposes would infringe the rights of the owner. Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis. Warranty Five (5) years from date of purchase, return to factory. For warranty details, visit www.RuggedCom.com or contact your customer service representative. Contacting RuggedCom Corporate HeadquartersUS HeadquartersEurope Headquarters RuggedCom Inc. 300 Applewood Crescent, Concord, Ontario Canada, L4K 5C7 Tel: +1 905 856 5288 Fax: +1 905 856 1995 Toll-free: 1 888 264 0006 RuggedCom 1930 Harrison Street, Suite 209 Hollywood, Florida USA, 33020 Tel: +1 954 922 7938 ext.103 Fax: +1 954 922 7984 Toll-free: 1 888 264 0006 RuggedCom Unit 41, Aztec Centre, Aztec West, Almondsbury, Bristol United Kingdom BS32 4TD Tel: +44 1454 203 404 Fax: +44 1454 203 403 Email: [email protected] Technical Support Toll Free (North America): 1 866 922 7975 International: +1 905 856 5288 Email: [email protected] Web: www.RuggedCom.com RuggedMAX™ WiN7000 High Power Base Station RuggedCom® RuggedMAX™3Installation Guide Rev 1.1 Table of Contents FCC Statement And Cautions ................................................................................................... 6 1. Introduction ............................................................................................................................ 7 1.1. About this Guide ...... ................................................................................................... 7 1.2. Capabilities and Features ........................................................................................... 8 1.3. Safety Information ....................................................................................................... 9 1.3.1. General ........... .................................................................................................. 9 1.3.2. Power Supply Requirements ............................................................................ 9 1.3.3. Equipment Installation ....... ............................................................................. 11 1.3.4. Radio Frequency (RF) Exposure .................................................................... 11 1.3.5. Lightning Protection ........................................................................................ 11 1.3.6. Power Cord Protection ........... ........................................................................ 11 1.3.7. Servicing ......................................................................................................... 12 1.3.8. Antenna Grounding Requirements .......... ....................................................... 12 1.3.9. Outdoor Grounding System ........ .................................................................... 12 1.3.10. User ports and power supply ....................................................................... 12 1.3.11. Safety Hazards ....... ...................................................................................... 12 1.4. WiN7000 High Power Base Station Physical Specifications ..................................... 13 2. Site and Installation Requirements ...................................................................................... 14 2.1. Mounting Considerations ........................................................................................... 14 3. Installation Procedures ......................................................................................................... 15 3.1. Pre-Installation Safety Instructions .... ........................................................................ 15 3.2. Package Components and Unpacking ...................................................................... 15 3.3. Installation Tools ....................................................................................................... 15 3.4. Installing the Base Station ........................................................................................ 16 3.4.1. WiN7000 High Power Base Station Mounting Bracket ................................... 17 3.4.2. Pole Mounting ........ .................................…

Text truncated - open the document above for the full version.

Date: 16/10/2011 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen, This letter is to comply with the requirements of section 15.203 as we hereby state that the device pertaining to application FCC ID: VG5WIN7023 requires professional installation due to the following reasons: A) This device must be professionally installed and used only with components (e.g. antennas) provided with the product. Failure to do so may result in significantly lower performance of the product. B) The device and all of its components should be installed only by experienced installation professionals who are familiar with local building and safety codes and, wherever applicable, are licensed by the appropriate government regulatory authorities. Sincerely, Israel Aminov HW Engineer

Compact Base Station Block Diagram General block diagram RF Transceiver #1 ANT #1 Digital Board GPS Board CPU Board PSU RX #1 TX #1 RF Transceiver #2 ANT #2 RX #2 TX #2 Digital board +CPU+ PSU block diagram RF Transceiver block diagram There are 2 transceivers in the Compact base station (to get full MIMO 2xTX + 2xRX), each one connected to antenna. This is the block diagram of single transceiver

Company Name: Ruggedcom Inc. Address : 30 Whitmore Road City: Woodbridge, Ontario Country: Canada To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for confidentiality FCC ID: VG5WIN7023 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: 27/9/2011 Name and signature of applicant: Israel Aminov Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

October 17, 2011 To whom it may concern: Being the current FCC contact person on record for RuggedCom Inc.(Concord, Ontario office), I am authorizing Israel Aminov (also employed by RuggedCom Inc., Israel office) to act on my behalf as the FCC registered signee for current RuggedCom wireless submissions. This means that Israel Aminov has my approval and authorization to sign off on all relevant FCC documentation for RuggedCom Inc. Please don’t hesitate to contact me if there is any further clarification needed on the information presented above. Regards, Phil Levy, P. Eng. Manager, Software Engineering RuggedCom Inc. Tel:(905) 482-4549 Email:[email protected] RuggedCom Inc.Tel:(905) 856-5288 300 Applewood CresFax:(905) 856-1995 Concord, OntarioToll-Free:(888) 264-0006 Canada, L4K 5C7 www.RuggedCom.com

Ruggedcom Inc. WiMax Base Station Model: WiN7023 EXTERNAL PHOTOGRAPHS

Ruggedcom Inc. CAVITY FILTERS PHOTOGRAPHS A+B cavity filter A+B cavity filter ‐ front view A+B cavity filter ‐ rear view A+B cavity filter ‐ top view A+B cavity filter ‐ bottom view A+B cavity filter ‐ side view C+D cavity filter C+D cavity filter – front view C+D cavity filter – rear view C+D cavity filter – top view C+D cavity filter – bottom view C+D cavity filter – side view

External photos of Antenna Manufacturer: KENBOTONG; Model: KBT90DP16-2327 Antenna Top view Antenna Bottom view Antenna side view Antenna RF connectors view

Label Location Figure 20

Ruggedcom Inc. WiMax Base Station Model: WiN7023 INTERNAL PHOTOGRAPHS Internal view Digital Board – Top view Digital Board – Bottom view CPU Board – Top view CPU Board – Bottom view PSU Board – Top view PSU Board –Bottom view GPS Board – Top view GPS Board – Bottom view RF Board – With cover RF Board – Without cover

      

   


                  !  "  # $   %#$&"#'(#)*+,- $   %$&" *
"'..
-  /"# $  '!  $$$.0 1      !  "  '   !  *   ! $    (2 *  $ "#'(#)*+3" 
    45 #+,,,6 *7'      ! ) 8+"   

9,+"    )  % )&: ! !     !    ;$4 7   <3 4          /      / 4        ): " 5 #+,,,   !          "/   /  = )   !5 #+,,,"    ): ":   /   >        / )     !     9<!  / 
  !  

          ! "  #$    %
     !&$   '     !&      $      !
"!# $!         1 /?   51    /?        

Test Report No. 9112340871 Applicant: Ruggedcom Inc. Equipment Under Test: WiMax Transceiver Compact Base Station (cBST). Model: RuggedMax TM WIN7023 From The Standards Institution Of Israel Industry Division Electronics & Telematics Laboratory EMC Section Test report No: 9112340871 Page 1 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Table of Contents 1. Applicant information .............................................................................. 2 2. Test performance ..................................................................................... 2 3. Summary of test: ..................................................................................... 3 4. Equipment under test description. ......................................................... 4 4.1 General description ................................................................................. 4 4.2 EUT configuration. ................................................................................... 5 5. Test results ............................................................................................... 6 5.1. Transmitter characteristics ..................................................................... 6 5.1.1. Occupied bandwidth according to § 2.1049. .......................................................6 5.1.2 EIRP output power test § 27.50 (1)(A) ..............................................................10 5.1.3 Peak - to - average power ratio test § 27.50 (1)(B). ...........................................15 5.1.4. Spurious emissions and band edge mask at antenna terminal § 27.53 (1) .........17 5.1.5. Radiated emissions test according to §§ 2.1053, 27.53 (1) ...............................35 5.1.6. Frequency stability test according to § 27.54 ....................................................50 APPENDIX A Photographs .............................................................................. 51 APPENDIX B Test equipment used ................................................................. 54 APPENDIX C General information. ................................................................... 59 Test report No: 9112340871 Page 2 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 1. Applicant information Applicant: Ruggedcom Inc. Address: 32 Maskit str, Herzlia, 12412, Israel Sample for test selected by: The applicant The date of test: 14 November, 26 December 2011 Equipment under test information Description of Equipment Under Test (EUT ): WiMax Transceiver Model: WIN7023 Serial Number: NA Software version of radio unit 4.2 Hardware version of radio unit ID = 15 Manufactured by: Ruggedcom Inc. 2. Test performance Location: SII EMC Section Purpose of test: Apparatus compliance verification in accordance with emission requirements Test specifications: 47CFR part 27 Subpart C, D, part 2 §§ 2.1049, 2.1053, part 1 §1.1310 This Test Report contains 59 pages and may be used only in full. This Test Report applies only to the specimen tested and may not be applied to other specimens of the same product. Test report No: 9112340871 Page 3 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 3. Summary of test: The EUT was found to be in compliance with requirements of: 47CFR part 27, §§ 27.50, 27.53, 27.54 and part 2 §§ 2.1049 Transmitter characteristics Subclasses Transmitter characteristics Occupied bandwidth 2.1049 Peak output power 27.50 Peak-to-average power ratio (PAPR) 27.50 Spurious emissions at antenna terminal 27.53 Spurious emissions radiated 27.53 Frequency stability 27.54 Telematics Laboratory 27 December 2011 Test performed by: Mr. Michael Feldman test technician Test report prepared by: Mr. Michael Feldman test technician Test report approved by: Mr. Yuri Rozenberg Head of EMC Branch Measurement uncertainty. Were relevant, the following measurement uncertainty level have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expended uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Test description Expanded uncertainty Radiated emissions in the open field test site at 3 m measuring distance: 30 MHz – 1.0 GHz 1.0 GHz – 18 GHz 2 Uc (E) = ± 4.32 dB 2 Uc (E) = ± 4.47 dB Test report No: 9112340871 Page 4 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 4. Equipment under test description. *The customer provided description. 4.1 General description The RuggedMax TM WIN7023 (hereinafter: EUT) is a WiMax compact base station Unit (cBST) that used in SM-MIMO uncorrelated mode and intended for outdoors installations. The EUT is a pole or wall mounted. Appliance with one 10/100 PoE port, fiber-optic and two antenna ports for two external antennas. The EUT inserted in a metallic enclosure without ventilation opening and two output connected to antennas via different type of external cavity filters: for Block A+B and for Block C+D. EUT includes the following sub-units: one internal DC-DC power supply board, two radio modules and digital Modem Board. The equipment provided in a DC configuration. EUT technical characteristics Technical characteristics of transmitter. Note Stand-alone/fixed use Always at distance at least 3.6 m from the people and public area. Assigned frequency range 2305 – 2320 MHz and 2345 – 2360 MHz Declare frequency range 2305 – 2320 MHz, 2345 – 2360 MHz Operating frequencies 2316.75 MHz, 2348.25 MHz. 3.5 MHz EBW 2307.5, 2312.5; 2352.5, 2357.5 MHz 5 MHz EBW 2310, 2355 MHz 10 MHz EBW Antenna connection N-Type connector Professional installation Transmitter 99% power bandwidth 3.5 MHz, 5 MHz, 10 MHz Type of modulation 4QAM, 16QAM, 64QAM Type of multiplexing TDMA Modulating test signal (baseband) PRBS Maximum transmitter duty cycle in normal use 75 % Transmitter duty cycle supplied for test 75 % Antenna information Antenna Type Manufacturer Model Gain, dBi Omni 2.3-2.7 GHz MARS MA-WO25-9 9 Secto…

Text truncated - open the document above for the full version.

Test report No: 9112340871 Page 25 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Carrier frequency 2312.5 MHz. Plot # 56 Plot # 57 Plot # 58. Plot # 59 Test report No: 9112340871 Page 26 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Plot # 60. Plot # 61 Plot # 62 Plot # 63 Plot # 64 Test report No: 9112340871 Page 27 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Carrier frequency 2352.5 MHz. Plot # 65 Plot # 66 Plot # 67. Plot # 68 Plot # 69 Plot # 70 Test report No: 9112340871 Page 28 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Plot # 71. Plot # 72 Plot # 73 Plot # 74 Plot # 75 Test report No: 9112340871 Page 29 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Carrier frequency 2357.5 MHz. Plot # 76 Plot # 77 Plot # 78. Plot # 79 Plot # 80 Plot # 81 Test report No: 9112340871 Page 30 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Plot # 82 Plot # 83 Plot # 84 Plot # 85 Test report No: 9112340871 Page 31 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 10 MHz EBW Carrier frequency 2310 MHz . Plot # 86 Plot # 87 Plot # 88. Plot # 89 Plot # 90 Plot # 91 Test report No: 9112340871 Page 32 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Plot # 92 Plot # 93 Plot # 94. Plot # 95 Test report No: 9112340871 Page 33 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Carrier frequency 2355 MHz. Plot # 96 Plot # 97 Plot # 98. Plot # 99 Plot # 100 Plot # 101 Test report No: 9112340871 Page 34 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Plot # 102 Plot # 103 Plot # 104. Plot # 105. Plot # 106. Test report No: 9112340871 Page 35 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 5.1.5. Radiated emissions test according to §§ 2.1053, 27.53 (1) Operating Frequency Range 2305 – 2320 MHz , 2345 – 2360 MHz Ambient Temperature 21 0 C Relative Humidity 48% Air Pressure 1006 hPa The frequency spectrum was investigated from the lowest radio frequency generated in the equipment up to the tenth harmonic of the highest fundamental frequency. No emissions except at carrier frequencies points were found. For the test results refer to the table and plots in this section. EBW, MHz Carrier frequency, MHz Measured frequency, MHz Measured level, dBm Specified limit, dBm Margin, dB Reference to plot # 3.5 2316.75 2317.6 -23.1 -13.0 10.1 108 2320 -57.6 -45.0 12.6 109 2348.25 2344 59.7 -45.0 14.7 116 2349.2 -22.2 -13.0 9.2 117 5.0 2307.5 2270 -60.7 -45.0 15.7 121 2320 -50.8 -45.0 5.8 123 2937 -48.8 -45.0 3.8 125 2312.5 2297 -58.6 -45.0 13.6 128 2335 -58.5 -45.0 13.5 130 2968 -53.4 -45.0 8.4 132 2352.5 2335 -57.9 -45.0 12.9 137 2961 -54.0 -45.0 9.0 139 2357.5 2341 -58.4 -45.0 13.4 144 2357 -44.7 -13.0 31.7 145 10.0 2310 2254 -59.6 -45.0 14.6 149 2344 -58.7 -45.0 13.7 151 2355 2342 -58.4 -45.0 13.4 158 2950 -53.1 -45.0 8.1 160 Test report No: 9112340871 Page 36 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 LIMIT For operation in the bands 2305 –2320 MHz and 2345 – 2360 MHz, the power of any emissions outside the licensee’s frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, by the following amounts: Below 2285 MHz and above 2370 MHz and on all frequencies from 2320 to 2345 MHz by factor of not less then 75+10Log (P) dB (-45 [email protected] dBμV/m at 3m distance). On all frequencies from 2305 to 2320 MHz and on all frequencies from 2345 to 2360 MHz by factor of not less then 43+10Log (P) dB (-13 dBm@ 82.2 dBμV/m at 3m distance). By a factor of not less than: 43 + 10 log (P) dB at 2305 MHz, 70 + 10 log (P) dB (-40 dBm) at 2300 MHz, 72 + 10 log (P) dB (-42 dBm) at 2287.5 MHz. By a factor of not less than: 43 + 10 log (P) dB at 2360 MHz, 55 + 10 log (P) dB (-25 dBm) at 2362.5 MHz, 70 + 10 log (P) dB at 2365 MHz, 72 + 10 log (P) dB at 2367.5 MHz. TEST PROCEDURE Substitution method. The measurements were performed according to ANSI/TIA-603-C-2004 section 2.2.12 test method. Investigation of transmitter spurious emissions was performed. EUT was replaced by generator and substitution antenna. Level calculated from generator output level, substitution antenna gain and connected cable loss was compared with the limit. Measurements were performed under 64 QAM modulation as worse case. RBW = 1 MHz and VBW ≥ 1 MHz. Detector Sample and power average function. Test was performed for all emission bandwidths and all declare carrier (channel) frequencies. TEST EQUIPMENT USED: 5 6 7 8 9 10 13 15 Test report No: 9112340871 Page 37 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Recorded results shown below are common and worse for all emission bandwidths and transmitter frequencies. Plot # 107. Scan in 9 – 30 MHz band. Plot # 108. Scan in 30 – 1000 MHz band. Test report No: 9112340871 Page 38 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 3.5 MHz EBW. Carrier frequency 2316.75 MHz. Plot # 109 Plot # 110 Plot # 111. Plot # 112 Plot # 113. Plot # 114 Test report No: 9112340871 Page 39 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Plot # 115 Carrier frequency 2348.25 MHz. Plot # 116. Plot # 117 Test report No: 9112340871 Page 40 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Plot # 118 Plot # 119 Plot # 120. Plot # 121 Plot # 122. Test report No: 9112340871 Page 41 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 5 MHz EBW. Carrier frequency 2307.5 MHz. Plot # 123 Plot # 124 Plot # 125. Plot # 126 Plot # 127. Plot # 128 Test report No: 9112340871 Page 42 of 59 Pages Title: WiMax Transceiver Model : WIN7023 FCC ID: WQEWIN7023 Plot # 129. Carrier frequency 2312.5 MHz. Plot # 130. Plot # 131 Test report No: 9112340871 Page 43 of 59 Pages Title: WiMax Tran…

Text truncated - open the document above for the full version.

Conducted measurements. Test setup. Radiated emission test setup. Radiated emission test setup. Radiated emission test setup. Radiated emission test setup.