VNH-R-807Network AV Receiver (WiFi)

R-807 NETWORK AV RECEIVER RÉCEPTEUR RÉSEAU AV RECEPTOR A/V CON CONEXIÓN DE RED OPERATING INSTRUCTIONS GUIDE D’UTILISATION INSTRUCCIONES DE FUNCIONAMIENTO 2 Safety Information READ THIS BEFORE OPERATING YOUR UNIT CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE FRONT OR BACK COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates the presence of uninsulated “dangerous voltage” within the product’s enclosure WKDWPD\EHRIVXI¿FLHQWPDJQLWXGHWRFRQVWLWXWHDULVNRIHOHFWULFVKRFN This symbol indicates important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION x /HDYHVSDFHDURXQGWKHXQLWIRUVXI¿FLHQWYHQWLODWLRQ x Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct sunlight or heating equipment. x Keep the unit free from moisture, water, and dust. x Do not let foreign objects in the unit. x Keep the ventilation openings clear of items, such as newspapers, linens, or curtains. x .HHSRSHQÀDPHIURPFDQGOHVRURWKHUVRXUFHV away from the unit. x Observe the local regulations regarding disposal of SDFNDJLQJPDWHULDOVH[KDXVWHGEDWWHULHVDQGROG equipment. x Do not expose the unit to dripping or splashing, or . ADVICE: SODFHREMHFWV¿OOHGZLWKOLTXLGVVXFKDVYDVHV x Do not let insecticides, benzene, or thinner come in This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. contact with the unit. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. x Never disassemble or modify the unit in any way. Notes on the AC power cord and the wall outlet x The unit remains connected to AC power as long as it is plugged into the wall outlet, even if the unit has been turned off. x To completely disconnect this product from AC SRZHUGLVFRQQHFWWKHSOXJIURPWKHZDOOVRFNHW outlet. x :KHQVHWWLQJXSWKLVSURGXFWPDNHVXUHWKDWWKH$& outlet you are using is easily accessible. x Disconnect the plug from the wall outlet when not using the unit for long periods of time. Caution regarding installation Note Wall 'RQRWEORFNYHQWLODWLRQRSHQLQJVRUVWDFNRWKHUHTXLSPHQWRQWKHWRS Note:)RUKHDWGLVSHUVDOGRQRWLQVWDOOWKLVXQLWLQDFRQ¿QHGVSDFHVXFKDVDERRNFDVHRUVLPLODUHQFORVXUH 3 Safety Information English FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (a) This device may not cause harmful interference, and (b) This device must accept any interference received, including interference that may cause undesired operation. )&&3DUW &DXWLRQFKDQJHVRUPRGL¿FDWLRQV not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Important Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7'RQRWEORFNDQ\YHQWLODWLRQRSHQLQJV,QVWDOOLQ accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus LQFOXGLQJDPSOL¿HUV WKDWSURGXFHKHDW 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does QRW¿WLQWR\RXURXWOHWFRQVXOWDQHOHFWULFLDQIRU replacement of the obsolete outlet. 103URWHFWWKHSRZHUFRUGIURPEHLQJZDONHGRQ or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 112QO\XVHDWWDFKPHQWVDFFHVVRULHVVSHFL¿HGE\WKH manufacturer. 12 Use only with the cart, stand, tripod, EUDFNHWRUWDEOHVSHFL¿HGE\WKH manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 145HIHUDOOVHUYLFLQJWRTXDOL¿HGVHUYLFHSHUVRQQHO Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 4 Table of Contents 2SAFETY INFORMATION 6GETTING STARTED 6What's Included 7Installing the Remote Control Battery 7Operating the range of the Remote Control 8PARTS DESCRIPTION 8Front Panel 9Front Display 9Rear Panel 10 …

Text truncated - open the document above for the full version.

R-807 NETWORK AV RECEIVER RÉCEPTEUR RÉSEAU AV RECEPTOR A/V CON CONEXIÓN DE RED OPERATING INSTRUCTIONS GUIDE D’UTILISATION INSTRUCCIONES DE FUNCIONAMIENTO 2 Safety Information READ THIS BEFORE OPERATING YOUR UNIT CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE FRONT OR BACK COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates the presence of uninsulated “dangerous voltage” within the product’s enclosure WKDWPD\EHRIVXI¿FLHQWPDJQLWXGHWRFRQVWLWXWHDULVNRIHOHFWULFVKRFN This symbol indicates important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION x /HDYHVSDFHDURXQGWKHXQLWIRUVXI¿FLHQWYHQWLODWLRQ x Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct sunlight or heating equipment. x Keep the unit free from moisture, water, and dust. x Do not let foreign objects in the unit. x Keep the ventilation openings clear of items, such as newspapers, linens, or curtains. x .HHSRSHQÀDPHIURPFDQGOHVRURWKHUVRXUFHV away from the unit. x Observe the local regulations regarding disposal of SDFNDJLQJPDWHULDOVH[KDXVWHGEDWWHULHVDQGROG equipment. x Do not expose the unit to dripping or splashing, or . ADVICE: SODFHREMHFWV¿OOHGZLWKOLTXLGVVXFKDVYDVHV x Do not let insecticides, benzene, or thinner come in This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. contact with the unit. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. x Never disassemble or modify the unit in any way. Notes on the AC power cord and the wall outlet x The unit remains connected to AC power as long as it is plugged into the wall outlet, even if the unit has been turned off. x To completely disconnect this product from AC SRZHUGLVFRQQHFWWKHSOXJIURPWKHZDOOVRFNHW outlet. x :KHQVHWWLQJXSWKLVSURGXFWPDNHVXUHWKDWWKH$& outlet you are using is easily accessible. x Disconnect the plug from the wall outlet when not using the unit for long periods of time. Caution regarding installation Note Wall 'RQRWEORFNYHQWLODWLRQRSHQLQJVRUVWDFNRWKHUHTXLSPHQWRQWKHWRS Note:)RUKHDWGLVSHUVDOGRQRWLQVWDOOWKLVXQLWLQDFRQ¿QHGVSDFHVXFKDVDERRNFDVHRUVLPLODUHQFORVXUH 3 Safety Information English FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (a) This device may not cause harmful interference, and (b) This device must accept any interference received, including interference that may cause undesired operation. )&&3DUW &DXWLRQFKDQJHVRUPRGL¿FDWLRQV not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Important Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7'RQRWEORFNDQ\YHQWLODWLRQRSHQLQJV,QVWDOOLQ accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus LQFOXGLQJDPSOL¿HUV WKDWSURGXFHKHDW 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does QRW¿WLQWR\RXURXWOHWFRQVXOWDQHOHFWULFLDQIRU replacement of the obsolete outlet. 103URWHFWWKHSRZHUFRUGIURPEHLQJZDONHGRQ or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 112QO\XVHDWWDFKPHQWVDFFHVVRULHVVSHFL¿HGE\WKH manufacturer. 12 Use only with the cart, stand, tripod, EUDFNHWRUWDEOHVSHFL¿HGE\WKH manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 145HIHUDOOVHUYLFLQJWRTXDOL¿HGVHUYLFHSHUVRQQHO Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 4 Table of Contents 2SAFETY INFORMATION 6GETTING STARTED 6What's Included 7Installing the Remote Control Battery 7Operating the range of the Remote Control 8PARTS DESCRIPTION 8Front Panel 9Front Display 9Rear Panel 10 …

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 inkel 2013.02.04 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Certification Service Technology Inc. (CSTech) hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product description : Network AV Receiver model name : R-807 FCC ID : VNH- R-807 We affirm that between SIEMIC and Certification Service Technology Inc. (CSTech), any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature : Client’s name / title : Eun-Hwan Shim (Principal Reseach Engineer) Contact information / address : Information Company Name Inkel Corporation Address 3-8, CheongCheon-Dong, Bupyeong-Gu, Incheon, 403-853, Republic of Korea Name For Contact Purposes BonKeun, Koo E-mail [email protected] Telephone no. +82-32-650-6141 Fax no. +82-32-650-6466

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 3.0 inkel 2013.02.04 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: VNH-R-807 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description Th e above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : Eun-Hwan Shim (Principal Reseach Engineer) Contact information / address: Information Company Name Inkel Corporation Address 3-8, CheongCheon-Dong, Bupyeong-Gu, Incheon, 403-853, Republic of Korea Name For Contact Purposes BonKeun, Koo E-mail [email protected] Telephone no. +82-32-650-6141 Fax no. +82-32-650-6466 SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 3.0 inkel 2013.02.04 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: VNH-R -807 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days (please check one). - External Photo - Internal Photo - Setup Photo - User manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client’s signature : Client’s name / title : Eun-Hwan Shim (Principal Reseach Engineer) Contact information / address : Information Company Name Inkel Corporation Address 3-8, CheongCheon-Dong, Bupyeong-Gu, Incheon, 403-853, Republic of Korea Name For Contact Purposes BonKeun, Koo E-mail [email protected] Telephone no. +82-32-650-6141 Fax no. +82-32-650-6466

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 inkel 2013.02.04 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Certification Service Technology Inc. (CSTech) hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product description : Network AV Receiver model name : R-807 FCC ID : VNH- R-807 We affirm that between SIEMIC and Certification Service Technology Inc. (CSTech), any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature : Client’s name / title : Eun-Hwan Shim (Principal Reseach Engineer) Contact information / address : Information Company Name Inkel Corporation Address 3-8, CheongCheon-Dong, Bupyeong-Gu, Incheon, 403-853, Republic of Korea Name For Contact Purposes BonKeun, Koo E-mail [email protected] Telephone no. +82-32-650-6141 Fax no. +82-32-650-6466

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 3.0 inkel 2013.02.04 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: VNH-R-807 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description Th e above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : Eun-Hwan Shim (Principal Reseach Engineer) Contact information / address: Information Company Name Inkel Corporation Address 3-8, CheongCheon-Dong, Bupyeong-Gu, Incheon, 403-853, Republic of Korea Name For Contact Purposes BonKeun, Koo E-mail [email protected] Telephone no. +82-32-650-6141 Fax no. +82-32-650-6466 SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 3.0 inkel 2013.02.04 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: VNH-R -807 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days (please check one). - External Photo - Internal Photo - Setup Photo - User manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client’s signature : Client’s name / title : Eun-Hwan Shim (Principal Reseach Engineer) Contact information / address : Information Company Name Inkel Corporation Address 3-8, CheongCheon-Dong, Bupyeong-Gu, Incheon, 403-853, Republic of Korea Name For Contact Purposes BonKeun, Koo E-mail [email protected] Telephone no. +82-32-650-6141 Fax no. +82-32-650-6466

Photographs of EUT [External View] Front Rear Top Bottom Right Left Remocon

Photographs of EUT [External View] Front Rear Top Bottom Right Left Remocon

LRLR LRLRLR BD/BDR BD/BDR DVD/DVR STB/CBL AUX BD/BDRBD/BDR DVD/DVR ROOM 2 MONITOR HDMI (BD/BDR)(DVD/DVR)(STB/CBL)(GAME)(AUX) IN IN IN OUT OUT 1234 5 MONITOR OUT (ARC) ANTENNA FM 75 GND AM LOOP OPT COAX (TV) (F.AUX) DIGITAL IN AUDIO VIDEO FRONTSURROUNDCENTER SURROUND BACK / FRONT HEIGHT / ROOM2 PREOUT SUB- WOOFER SPEAKERS LAN/ ETHERNET SPEAKER IMPEDANCE 6 OHMS ( ) SN. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. POWER SOURCE POWER CONSUMPTION R-807 120V 60Hz 260W DESIGNED IN USA MADE IN CHINA NETWORK AV RECEIVER This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions : (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Class 2 Wiring 2013. 1. 14 R-807 (A) CB.. MP 3207-21464-600-0S Label Location & FCC ID No. AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR. WARNING : SHOCK HAZARD-DO NOT OPEN. FCC ID : VNH-R-807 AC IN N18041 POWER SOURCE POWER CONSUMPTION R-807 230V 50Hz 260W NETWORK AV RECEIVER 2013. 1. 7 R-807 (G) CB.. LPP 3207-21464-601-0S DESIGNED IN USA ASSEMBLED IN CHINA AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR. WARNING : SHOCK HAZARD-DO NOT OPEN. AC IN 2012. 12. 21 R-807 (C) CB.. LPP 3207-21464-602-0S POWER SOURCE POWER CONSUMPTION R-807 220V 50Hz 260W /NETWORK AV RECEIVER AV RoHS DATE : CMIIT ID : XXXXXXXXXX INKEL CORPORATION

LRLR LRLRLR BD/BDR BD/BDR DVD/DVR STB/CBL AUX BD/BDRBD/BDR DVD/DVR ROOM 2 MONITOR HDMI (BD/BDR)(DVD/DVR)(STB/CBL)(GAME)(AUX) IN IN IN OUT OUT 1234 5 MONITOR OUT (ARC) ANTENNA FM 75 GND AM LOOP OPT COAX (TV) (F.AUX) DIGITAL IN AUDIO VIDEO FRONTSURROUNDCENTER SURROUND BACK / FRONT HEIGHT / ROOM2 PREOUT SUB- WOOFER SPEAKERS LAN/ ETHERNET SPEAKER IMPEDANCE 6 OHMS ( ) SN. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. POWER SOURCE POWER CONSUMPTION R-807 120V 60Hz 260W DESIGNED IN USA MADE IN CHINA NETWORK AV RECEIVER This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions : (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Class 2 Wiring 2013. 1. 14 R-807 (A) CB.. MP 3207-21464-600-0S Label Location & FCC ID No. AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR. WARNING : SHOCK HAZARD-DO NOT OPEN. FCC ID : VNH-R-807 AC IN N18041 POWER SOURCE POWER CONSUMPTION R-807 230V 50Hz 260W NETWORK AV RECEIVER 2013. 1. 7 R-807 (G) CB.. LPP 3207-21464-601-0S DESIGNED IN USA ASSEMBLED IN CHINA AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR. WARNING : SHOCK HAZARD-DO NOT OPEN. AC IN 2012. 12. 21 R-807 (C) CB.. LPP 3207-21464-602-0S POWER SOURCE POWER CONSUMPTION R-807 220V 50Hz 260W /NETWORK AV RECEIVER AV RoHS DATE : CMIIT ID : XXXXXXXXXX INKEL CORPORATION

Photographs of EUT [Internal View] Main Board _Front Main Board _Rear Power Board-1_Front Power Board-1_Rear Power Board-2_Front Power Board-2_Rear Power Board-3_Front Power Board-3_Rear WIFI Board Front WIFI Board Rear ANT Board Front ANT Board Rear Display Board Front Display Board Rear Switch Board Front Switch Board Rear Connection Board Front-1 Connection Board Rear-1 Connection Board Front-2 Connection Board Rear-2 Connection Board Front-3 Connection Board Rear-3 Antenna Part (Chip Antenna)

Photographs of EUT [Internal View] Main Board _Front Main Board _Rear Power Board-1_Front Power Board-1_Rear Power Board-2_Front Power Board-2_Rear Power Board-3_Front Power Board-3_Rear WIFI Board Front WIFI Board Rear ANT Board Front ANT Board Rear Display Board Front Display Board Rear Switch Board Front Switch Board Rear Connection Board Front-1 Connection Board Rear-1 Connection Board Front-2 Connection Board Rear-2 Connection Board Front-3 Connection Board Rear-3 Antenna Part (Chip Antenna)

Certification Service Technology Model Name : R-807 Test Report No : CSTPOC13-FCC0008-1 CSTech Inc. Page Number : Page 2 of 3 This report shall not be reproduced except in full, without the allowance of the test laboratory. 1. General Description of EUT Item Specification note Dimension 435 mm x 125 mm x 331 mm RF spec Frequency Range 2412 MHz ~ 2472 MHz (802.11 b, g, n(HT20)), 2422 MHz ~ 2462 MHz (802.11 n(HT40)) Channel 13 (802.11 b, g, n(HT20)), 9 (802.11 n(HT40)) Modulation Type CCK(802.11b), OFDM (802.11g, n(HT20), n(HT40)) Power 11.09 mW (802.11b), 4.62 mW (802.11g), 4.58 mW (802.11n(HT20)), 2.66 mW (802.11n(HT40)) * It is maximum peak conducted power in band Antenna Gain 0.5 dBi Weigh t 10.4 kg Power Source AC 110V NOTE: 1. This report is issued as a supplementary report of the original report. 2. The EUT, operates in the 2.4GHz frequency range, lets you connect WiFi devices to the network. 3. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. 2. General Information of Test Certification Service Technology Inc. (CSTech) Test Site Location 1055, Singil-dong ,Danwon-gu ,Ansan-si, Gyeonggi-do, Korea 425-839 TEL : +82-31-493-2001 FAX : +82-31-493-2055 Certification Service Technology Model Name : R-807 Test Report No : CSTPOC13-FCC0008-1 CSTech Inc. Page Number : Page 3 of 3 This report shall not be reproduced except in full, without the allowance of the test laboratory. 3. RF Exposure Measurement 3.1 Introduction & Standard RF Exposure Requirements : 47 CFR §1.1307(b) RF Radiation Exposure Limits : 47 CFR §1.1310 RF Radiation Exposure Guidelines : FCC OST/OET Bulletin Number 65 EUT Frequency Band : 2412 MHz ~ 2472 MHz (WiFi) Limits for General Population/Uncontrolled Exposure in the band of : 1500 MHz ~ 100000 MHz Power Density Limit : 1 mW/ cm2 3.2 Compliance criteria Evaluating for Power flux density Equations are accurate in the far-field lf antenna but will over-predict in the near field. Under above describe specification of EUT and Antenna, Equivalent plane wave power density is calculated as below underlined quotation formula ; S eq (W/m 2 ) = E x H = E 2 /η = √PG(￠Φ) /4π r 2 Where : • S eq (W/m 2 ) = Equivalent plane wave power density • E (V/m) = Electric field strength • H (A/m) = Magnetic field strength • η (Ω ) = Free space wave impedance = 120 π Ω • ￠Φ = elevation and azimuth angles • P (W) = Power input to the antenna • G(㏈i ) = Antenna gain relative to an isotropic antenna • r (m) = distance from observation point to the antenna 3.2.1 Accordingly as a result of calculated value -. P (W) = 11.09 ㎽ -. G(dBi) = 0.5 ㏈i (Conversion 0.5 ㏈ i to Linearity value is 1.12) -. r (m) = setting a distance (20cm) from the antenna to calibrated tuned receiving antenna in far field S eq (W/m 2 ) : √0.01109x1.12/4 x 3.14 x 0.2 2 = 0.1572 So, above calculated 0.36203 W/m 2 is comply with the value required standard

Certification Service Technology Model Name : R-807 Test Report No : CSTPOC13-FCC0008-1 CSTech Inc. Page Number : Page 2 of 3 This report shall not be reproduced except in full, without the allowance of the test laboratory. 1. General Description of EUT Item Specification note Dimension 435 mm x 125 mm x 331 mm RF spec Frequency Range 2412 MHz ~ 2472 MHz (802.11 b, g, n(HT20)), 2422 MHz ~ 2462 MHz (802.11 n(HT40)) Channel 13 (802.11 b, g, n(HT20)), 9 (802.11 n(HT40)) Modulation Type CCK(802.11b), OFDM (802.11g, n(HT20), n(HT40)) Power 11.09 mW (802.11b), 4.62 mW (802.11g), 4.58 mW (802.11n(HT20)), 2.66 mW (802.11n(HT40)) * It is maximum peak conducted power in band Antenna Gain 0.5 dBi Weigh t 10.4 kg Power Source AC 110V NOTE: 1. This report is issued as a supp…

Text truncated - open the document above for the full version.