VNH-S9SURROUND PANORAMA

2 Safety Information READ THIS BEFORE OPERATING YOUR UNIT CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE FRONT OR BACK COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. This symbol indicates important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION • Leave space around the unit for sufficient ventilation. • Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct sunlight or heating equipment. • Keep the unit free from moisture, water, and dust. • Do not let foreign objects in the unit. • Keep the ventilation openings clear of items, such as newspapers, linens, or curtains. • Keep open flame from candles or other sources away from the unit. • Observe the local regulations regarding disposal of packaging materials, exhausted batteries and old equipment. • Do not expose the unit to dripping or splashing, or place objects filled with liquids such as vases. • Do not let insecticides, benzene, or thinner come in contact with the unit. • Never disassemble or modify the unit in any way. Notes on the AC power cord and the wall outlet • The unit remains connected to AC power as long as it is plugged into the wall outlet, even if the unit has been turned off. • To completely disconnect this product from AC power, disconnect the plug from the wall socket outlet. • When setting up this product, make sure that the AC outlet you are using is easily accessible. • Disconnect the plug from the wall outlet when not using the unit for long periods of time. Safety Information English 3 FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (a) This device may not cause harmful interference, and (b) This device must accept any interference received, including interference that may cause undesired operation. (FCC Part 15.21) Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For Canadian customers: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la Classe B est conforme a la norme NMB-003 du Canada. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. S9/S7 3D Sound Soundbar 4 Important Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 5 English Table of Contents 2 SAFETY INFORMATION 6 GETTING STARTED 6 What's Included 7 Parts Description 10 INSTALLATION 10 Installing the System 11 Installing the Remote Control Battery 12 CONNECTIONS 12 Subwoofer Connection 12 Connecting to HDMI C…

Text truncated - open the document above for the full version.

Inkel Corporation 345-50, Gasan-Dong, Gumcheon-Gu, Seoul, South Korea 153-802 Te l . +82-2-850-6295 Fax +82-2-850-6478 December 19, 2012 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 In re : Inkel Corporation FCC Application for FCC ID: VNH-S9 To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Sincerely Yours, Eun-Hwan Shim(Principal Reseach Engineer) Inkel Corporation

Inkel Corporation 345-50, Gasan-Dong, Gumcheon-Gu, Seoul, South Korea 153-802 Tel. +82-2-850-6295 Fax +82-2-850-6478 December 19, 2012 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 LETTER OF AUTHORIZATION To whom it may concern: We, the undersigned, hereby authorize MOVON CORPORATION to act on our behalf in all manners relating to application for equipment authorization for FCC ID: VNH-S9. including signing of all documents relating to these matters. Any and all acts carried out by MOVON CORPORATION on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Inkel Corporation MOVON CORPORATION (Contact Person) Contact name: Issac Jin Position: Manager Phone:(82)-338-8837 E-mail: [email protected] Sincerely Yours, Eun-Hwan Shim(Principal Reseach Engineer) Inkel Corporation

Inkel Corporation 345-50, Gasan-Dong, Gumcheon-Gu, Seoul, South Korea 153-802 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: VNH-S9 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics Block Diagram Operation Description Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely Yours, Eun-Hwan Shim(Principal Reseach Engineer) Inkel Corporation

External photos of EUT Front view of EUT Rear view of EUT Top view of EUT Bottom view of EUT Side view of EUT

DESIGNED.CHECKED.APPROVED. Park Sung-Hee MANUFACTURING PROCESSFINISH COLORREMARK ( COLOR No.)MATERIALNo. STEEL PA R T No. PA R T NAME G·Design Group AV R&D Team 3 R&D Center inkel Corporation. MAKER MODEL TYPE MODEL No. BREND Lee Myung-Woo DESIGN SPECIFICATION *** 2012-11-062012-11-06 SPRAYBLACK CHASSIS COVER L / R A/G S7 / S9 SHERWOOD MP 2012-11-06 CHEONG WAH * STANDARD COLOR SILKSILVER* PANTONE 877C SERIAL No. SOUND PANORAMA S9 DESIGNED IN USA MADE IN CHINA 24V 1.8A FCC ID : VNH-S9 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions : (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Kim Yun-Sang 2012-11-06 S9 (A/G) : 3207-21453-601-0SS9 / S7 (A/G) : 3207-21453-600-0S S7 (A/G) : 3207-21453-602-0S BOTTOM VIEW SPRAY AREA SPRAY MASKING AREA (Hatching Area) SOUND PANORAMA 24V 1.8A This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions : (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. SERIAL No. S7 DESIGNED IN USA MADE IN CHINA

Internal photos of EUT Bluetooth module board BT Antenna Top view of Main PCB Bottom view of Main PCB Top view of SUB PCB Bottom view of SUB PCB Top view of SUB PCB Bottom view of SUB PCB Top view of SUB PCB Bottom view of SUB PCB Top view of SUB PCB Bottom view of SUB PCB Top view of SUB PCB Bottom view of SUB PCB Top view of Bluetooth module board Bottom view of Bluetooth module board

안테나 부품 승인원 결 결결 결 재 재재 재 담 담담 담 당 당당 당 품질팀장 품질팀장품질팀장 품질팀장 개발팀장 개발팀장개발팀장 개발팀장 승 승승 승 인 인인 인 이승찬 조병환 이승효 남정수 11/15 11/15 11/15 11/15 BUYER BUYERBUYER BUYER 인켈 모 모모 모 델 델델 델 명 명명 명 S9 부 부부 부 품 품품 품 명 명명 명 BLUETOOTH CHIP ANTENNA 부품코드 부품코드부품코드 부품코드 아로코드 아로코드아로코드 아로코드 ABM6020B2 경기도 안양시 만안구 안양7동 205-11 TEL : 031)448-8172 / FAX : 031)448-4194 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 2/24 2/23 - -- - 목 목목 목 차 차차 차 - -- - 1. 1. 1. 1. 승인원 승인원승인원 승인원 이력 이력이력 이력 LIST LISTLIST LIST 2. 2. 2. 2. 제품사양 제품사양제품사양 제품사양 2.1 재질증명서 2.2 치수 규격 2.3 PCB 설계 3. 3. 3. 3. 기술적 기술적기술적 기술적 사항 사항사항 사항 3.1 일반적 사양 3.2 전기적 사양 3.3 기구적 사양 4. 4. 4. 4. 시험 시험시험 시험 조건 조건조건 조건 4.1 시험 환경 조건 및 시험 장비 4.1.1 SWR/Return Loss 4.1.2 이득 5. 5. 5. 5. 전기적 전기적전기적 전기적 요구 요구요구 요구 사항 사항사항 사항 5.1 정재파비 측정 조건 5.2 정재파비 5.2.1 매칭회로 5.2.2 Network data 5.3 안테나 이득 측정 조건 5.4 안테나 이득 5.4.1 Passive data(3D Measurement) 5.5 수동 지그 측정 조건 6. 6. 6. 6. 기구적 기구적기구적 기구적 요구 요구요구 요구 사항 사항사항 사항 6.1 기구적 도면 7. 7. 7. 7. 신뢰성 신뢰성신뢰성 신뢰성 요구 요구요구 요구 사항 사항사항 사항 7.1 기계적 실험 7.2 환경 시험 8 88 8. . . . 칩 칩칩 칩 안테나 안테나안테나 안테나 제조 제조제조 제조 공정도 공정도공정도 공정도 9. 9. 9. 9. 납땜 납땜납땜 납땜 조건 조건조건 조건 10. 10. 10. 10. 주의 주의주의 주의 사항 사항사항 사항 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 3/24 3/23 12. 12. 12. 12. 포장 포장포장 포장 사양 사양사양 사양 12.1 Carrier 및 Reel 사양 12.2 박스 포장 사양 * * * * 부품 부품부품 부품 구성표 구성표구성표 구성표, , , , 유해물질 유해물질유해물질 유해물질 성적서 성적서성적서 성적서 별첨 별첨별첨 별첨 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 4/24 4/23 1. 1. 1. 1. 승인원 승인원승인원 승인원 이력 이력이력 이력 LIST LISTLIST LIST NO NONO NO 일자 일자일자 일자 변경 변경변경 변경 전 전전 전 변경 변경변경 변경 후 후후 후 근거 근거근거 근거 사유 사유사유 사유 REV REVREV REV 1 2 3 4 5 ※ 상기 REV.은 승인 후 양산중의 변경사항에 대해서만 REVISION 변경 함 . 개발중의 변경사항에 대해서는 REVISION 변경 없음. 2. 2. 2. 2. 제품사양 제품사양제품사양 제품사양 2.1 2.1 2.1 2.1 재질 재질재질 재질 증명서 증명서증명서 증명서 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 5/24 5/23 2.2 2.2 2.2 2.2 치수 치수치수 치수 규격 규격규격 규격 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 6/24 6/23 3 33 3. . . . 기술적 기술적기술적 기술적 사항 사항사항 사항 3 33 3.1 .1.1 .1 일반적 일반적일반적 일반적 사양 사양사양 사양 MODEL S9 ANTENNA TYPE B.T CHIP ANTENNA APPLICATIONS BT 3.2 3.2 3.2 3.2 전기적 전기적전기적 전기적 사양 사양사양 사양 FREQUENCY RANGE[MHz] (SET MEASUREMENT) 2,400~2483 MHz MEASUREMENT FREQUENCY POINT[MHz] (SET MEASUREMENT) 2,400 2,483 V.S.W.R (SET MEASUREMENT) MAX 2.0 MAX 2.0 TOTAL GAIN(PEAK/AVG)[dBi](F/O) -0.1/-5.6 INPUT IMPEDANCE(Ω) 50 Ohm POLARIZATION LINEAR RADIATION PATTERN OMNIDIRECTIONAL 3 33 3.3 .3 .3 .3 기구적 기구적기구적 기구적 사양 사양사양 사양 CONNECTOR N/A LENGTH REF DRAWING (No 6.1) TEMPERATURE -20 ~ 70(°C) WEIGHT 0.1(g) 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 7/24 7/23 4 44 4. . . . 시험 시험시험 시험 조건 조건조건 조건 4 44 4. .. .1 1 1 1 시험 시험시험 시험 환경 환경환경 환경 조건 조건조건 조건 및 및및 및 시험 시험시험 시험 장비 장비장비 장비 4.1.1 SWR/Return Loss Network Analyzer를 이용하여 SWR/Return Loss를 측정하여 표본 샘플을 선별, 수동 측정 지그 또는 자동화 검사 장비를 이용하여 양품과 불량품을 선별한다. 4.1.2 이득 당사가 보유한 무반사실에서 상기 4.1.1 에서 측정된 시료를 이용하여 안테나 이득을 측정한다. 안테나 측정을 위한 무반사실 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 8/24 8/23 5 55 5. . . . 전기적 전기적전기적 전기적 요구 요구요구 요구 사항 사항사항 사항 5 55 5. .. .1 11 1 정재파비 정재파비정재파비 정재파비 측정 측정측정 측정 조건 조건조건 조건 측정방법 : 그림 5-1과 같이 장비를 연결하고 NETWORK ANALYZER의 REFLECTION POINT에 안테나가 장착된 시료를 연결하여 사용주파수 대역 내에서의 IMPEDANCE를 측정한다. (그림 5-1) 5 55 5. .. .2 22 2 정재파비 정재파비정재파비 정재파비 5.2.1 매칭회로 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 9/24 9/23 5.2.2 Network data 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 10/24 10/23 5 55 5. .. .3 33 3 안테나 안테나안테나 안테나 이득 이득이득 이득 측정 측정측정 측정 조건 조건조건 조건 측정 방법 : 그림 5-2와 같이 혼 안테나를 표준 안테나로 설정하여 [dBi]로 나타내었다. (그림 5-2) 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 11/24 11/23 5.4 5.45.4 5.4 안테나 안테나안테나 안테나 이득 이득이득 이득 5.4.1 Passive data(3D Measurement) 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 12/24 12/23 5 55 5. .. .5 5 5 5 수동 수동수동 수동 지그 지그지그 지그 측정 측정측정 측정 방법 방법방법 방법 측정방법 : 그림 5-3과 같이 장비를 연결하고 NETWORK ANALYZER의 REFLECTION POINT에 특성 측정지그를 연결하여 표본 샘플을 선별,수동 측정 지그 또는 자동화 검사 장비를 이용하여 양품과 불량품을 선별한다 (그림 5-3) 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 13/24 13/23 6 66 6. . . . 기구적 기구적기구적 기구적 요구 요구요구 요구 사항 사항사항 사항 6 66 6. .. .1 11 1 기구적 기구적기구적 기구적 도면 도면도면 도면 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 14/24 14/23 7 77 7. . . . 신뢰성 신뢰성신뢰성 신뢰성 요구 요구요구 요구 사항 사항사항 사항 7 77 7.1 .1 .1 .1 기계적 기계적기계적 기계적 실험 실험실험 실험 항목 시험방법 판정 낙하시험 ▪ 조건 : 높이 150 ㎝ (10면 = 6면+모서리4개소) 1회 실시 ▪ 셋트무게 (인테나 실장 후 시험) ▪ 바닥 : 콘크리트 또는 철판. ▪ 외관및 전기적특성 확인 도금두께 ▪ 도금두께 측정기를 이용하여 하도Ni 과 상도 Au의 두께 측정 ▪ Ni : 3㎛ 이상 ▪ Au : 0.03㎛ 이상 SMT고착강도시험 ▪SMT완료된 제품을 F방향으로 힘을 가하여 이탈되는 힘을 측정한다. (시험speed 24 min/mm) ▪ 5 kgf 이상 안테나 안테나안테나 안테나 승인원 승인원승인원 승인원 DATE DATEDATE DATE 2012. 11. 15 REV. REV.REV. REV. 1.0 MODEL MODELMODEL MODEL S9 TYPE TYPETYPE TYPE BLUETOOTH CHIP 15/24 15/23 7 77 7.2 .2 .2 .2 환경 환경환경 환경 시험 시험시험 시험 고습저장시험 ▪ 60°C 95%에서48시간 저장 ▪ 외관및 전기적특성 확인 저온저장시험 ▪ -40°C 에서48시간 저장 ▪ 외관및 전기적특성 확인 열충격시험 ▪ 온도 조건 :-40±3°C/min ↔ +85…

Text truncated - open the document above for the full version.

MOVON CORPORATION Report Number: MOV-12-RF-I023 Page : (1) of (44) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. FCC Part 15 Subpart B&C §15.247 Test Report Equipment Under Test Surround Panorama Model Name S9 Applicant Inkel Corporation. FCC ID VNH-S9 Manufacturer Huizhou Vision Electronics Date of Test(s) 2012. 12. 05 ~ 2012. 12. 14 Date of Issue 2012. 12. 19 In the configuration tested, the EUT complied with the standards specified above. Issue to Issue by Inkel Corporation 345 -50, Gasan-Dong, Gumcheon-Gu, Seoul, South Korea 153 -802 Tel.: +82 -2-850-6295 Fax: +82-2-850-6478 MOVON CORPORATION 194 -1, Geumeo-ri, Pogok-eup, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea, 449-812 Tel.: +82-31-338-8837 Fax: +82-31-338-8847 MOVON CORPORATION Report Number: MOV-12-RF-I023 Page : (2) of (44) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. Revision history Revision Date of issue Description Revised by -- Dec 19, 2012 Initial -- MOVON CORPORATION Report Number: MOV-12-RF-I023 Page : (3) of (44) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. Table of contents 1. ATTESTATION OF TEST RESULTS.............................................................................. 4 2. EUT DESCRIPTION ........................................................................................................ 5 3. INFORMATION ABOUT THE FHSS CHARACTERISTICS ............................................ 5 4. MEASUREMENT EQUIPMENT ...................................................................................... 6 5. TRANSMITTER RADIATED SPURIOUS EMISSIONS AND CONDUCTED SPURIOUS EMISSIONS .................................................................................................................. 7 6. CONDUCTED POWER LINE TEST .............................................................................. 21 7. 20 ㏈ BANDWIDTH MEASUREMENT & 99 % BANDWIDTH MEASUREMENT ........ 24 8. MAXIMUM PEAK OUTPUT POWER MEASUREMENT ............................................... 28 9. HOPPING CHANNEL SEPARATION ........................................................................... 31 10. NUMBER OF HOPPING FREQUENCY ...................................................................... 33 11. TIME OF OCCUPANCY(DWELL TIME) ..................................................................... 35 12. ANTENNA REQUIREMENT ....................................................................................... 39 13. RF EXPOSURE EVALUATION .................................................................................. 40 14. TEST SETUP PHOTO OF EUT .................................................................................. 42 MOVON CORPORATION Report Number: MOV-12-RF-I023 Page : (5) of (44) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. 2. EUT Description Kind of product Surround Panorama Model Name S9 Serial Number N/A Power supply DC 24 V Frequency range 2 402 ㎒ ~ 2 480 ㎒ Modulation technique GFSK(1Mbps) Number of channels 79 Antenna gain 6.4 ㏈i (Max.) TEST SITE REGISTRATION NUMBER FCC(67068) 2.1. Declarations by the manufacturer The EUT is does not do anything at charging mode (Power is turned off when it is charging) 2.2. Details of modification None 3. Information about the FHSS characteristics 3.1. Pseudorandom frequency hopping sequence The channel is represented by a pseudo-random hopping sequence hopping through the 79 RF channels. The hopping sequence is unique for the piconet and is determined by the Bluetooth device address of the master; the phase in the hopping sequence is determined by the Bluetooth clock of the master. The channel is divided into time slots where each slot corresponds to an RF hop frequency. Consecutive hops correspond to different RF hop frequencies. The nominal hop rate is 1 600 hops/s. Example of a 79 hopping sequence in data mode: 40,21,44,23,42,53,46,55,48,33,52,35,50,65,54... 3.2 Equal Hopping Frequency Use All Bluetooth units participating in the piconet are time and hop-synchronized to the channel. 3.3 System Receiver Input Bandwidth The input bandwidth of the receiver is 1㎒. In every connection one Bluetooth device is the master and the other one is slave. The master determines the hopping sequence. The slave follows this sequence. Both devices shift between RX and TX time slot according to the clock of the master. Additionally the type of connection (e.g. single of multisport (packet) is set up at the beginning of the connection. The master adapts its hopping frequency and its TX/RX timing according to the packet type of the connection. Also the slave of the connection will use these settings. Repeating of a packet has no influence on the hopping sequence. The hopping sequence generated by the master of the connection will be followed in any case. That means, a repeated packet will not be send on the same frequency, it is send on the next frequency of the hopping sequence. 3.4 Equipment Description 15.247(g): In accordance with the Bluetooth Industry Standard, the system is designed to comply with all of The regulations in Section15.247 when the transmitter is presented with a continuous data (or information) system. 15.247(h):In accordance with the Bluetooth Industry Standard, the system does not coordinate it channels selection/ hopping sequence with other frequency hopping systems for the express purpose of avoiding the simultaneous occupancy of individual hop…

Text truncated - open the document above for the full version.

Test setup photo of EUT A. Setup photo of EUT Photo of radiated spurious emission at below 30㎒ Photo of radiated spurious emission at 30㎒ ~ 1 000㎒ Photo of radiated spurious emission at above 1 000㎒ Photo of Conducted emission at below 30㎒