VTV-M7EDEKAUHD RFID Module

1 www.JADAKtech.com THINGMAGIC ® M7E-PICO & M7E-DEKA USER GUIDE Doc #: 875-0093-01 Rev 2.3 2023 Novanta Inc. and its affiliated companies. All rights reserved. 2 www.JADAKtech.com 1. COPYRIGHT INFORMATION This product or document is protected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation. No part of this product or document may be reproduced in any form by any means without prior written authorization of Novanta Corporation and its licensors, if any. Microsoft and Windows are registered trademarks of Microsoft Corporation. 2. TECHNICAL SUPPORT AND CONTACT INFORMATION Telephone: 315.701.0678 https://www.jadaktech.com Email: [email protected] 3. REVISION HISTORY Date Version Description March 29, 2022 1.0 Updated photos and Regulatory Statements April 21, 2022 1.1 Added EU Declaration of Conformity June 7, 2022 1.2 Update Page Numbering Corrected the Doc # on title Page March 20, 2023 2.0 Expanded the entire doc to cover DEKA module October 13, 2023 2.1 Updated regional frequency specs November 17, 2023 2.2 Updated Regional Frequency specs for AU, ID and RU . December 10, 2023 2.3 Updated JP2, JP3 region frequency specs, DC Power specs; Spec Sheet 3 www.JADAKtech.com TABLE OF CONTENTS Table of Contents 1. COPYRIGHT INFORMATION ............................................................................................................... 2 2. TECHNICAL SUPPORT AND CONTACT INFORMATION ................................................................. 2 3. REVISION HISTORY............................................................................................................................. 2 4. Introduction .......................................................................................................................................... 8 4.1 Release Notes ............................................................................................................................... 8 5. Hardware Overview ............................................................................................................................. 9 5.1 Hardware Interfaces ...................................................................................................................... 9 5.1.1 Module Pin-out ..................................................................................................................... 9 5.1.2 Antenna Connections.........................................................................................................12 5.1.3 Voltage and Current Limits ................................................................................................12 5.1.4 Control Signal Specification ...............................................................................................12 5.1.5 General Purpose Input/Output (GPIO) ..............................................................................13 5.1.6 RUN Line ...........................................................................................................................14 5.2 DC Power Requirements ............................................................................................................14 5.2.1 RF Power Output Impact on DC Input Current and Power ................................................14 5.2.2 Power Supply Ripple..........................................................................................................16 5.2.3 Idle DC Power Consumption .............................................................................................17 5.2.4 Power Consumption ...........................................................................................................17 5.3 RF Characteristics .......................................................................................................................17 5.3.1 RF Output Power ...............................................................................................................17 5.3.2 Receiver Adjacent Channel Rejection ...............................................................................17 5.4 Environmental Specifications ......................................................................................................17 5.4.1 Thermal Considerations .....................................................................................................17 5.4.2 Thermal Management ........................................................................................................18 5.5 Electro-Static Discharge (ESD) Specification .............................................................................18 5.6 Shock and Vibration ....................................................................................................................19 5.7 Authorized Antennas ...................................................................................................................19 5.8 FCC Modular Certification Considerations ..................................................................................19 5.9 Physical Dimensions ...................................................................................................................20 5.9.1 Module Dimensions ...........................................................................................................20 5.9.2 Tape-and-Reel Dimensions ...............................................................................................21 5.10 SMT Reflow Profile ....................................................................................................................22 5.11 Hardware Integration .................................................................................................................23 5.11.1 Landing Pads ...................................................................................................................23 5.11.2 Module Carrier Board ...........................................................…

Text truncated - open the document above for the full version.

TSC Auto ID Technology Co., Ltd. Certification Application Attestation Statements TSC Auto ID Technology Co., Ltd. 9F., No. 95, Minquan Rd. Xindian Dist. New Taipei City 23141, Taiwan Subject: FCC ID: VTV-M7EDEKA To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) TSC Auto ID Technology Co., Ltd. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) TSC Auto ID Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 2024-03-18 City: New Taipei City Name (2) : Roger Wu Telephone number: +886-3-990-6677 Ext. 5307 Email address: [email protected] Signature: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK”

TSC Auto ID Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-18-2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: VTV-M7EDEKA TSC Auto ID Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, TianHeng Consulting, LLC. is our designated U.S. agent for service of process for the above referenced FCC ID. TSC Auto ID Technology Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. TianHeng Consulting, LLC. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Sincerely, Designated U.S. Agent Information: Name: TianHeng Consulting, LLC. FRN: 0033401258 Contact Person: Hualing Dong Address: 392 Andover Street, Wilmington, MA 01887, United States Tel.: +1 617-997-4010 Email: [email protected] U.S. Agent Signature: Applicant: Company Name: TSC Auto ID Technology Co., Ltd. Grantee Code: VTV Contact Name: Roger Wu Address: 9F., No. 95, Minquan Rd. Xindian Dist., New Taipei City, Taiwan Tel.: +886-3-990-6677 Ext. 5307 Email: [email protected] Applicant Signature: 2024/3/18 Hualing Dong, President March 20, 2024

TSC Auto ID Technology Co., Ltd. DECLARATION OF AUTHORISATION Hereby, we Name: TSC Auto ID Technology Co., Ltd. Address: 9F., No. 95, Minquan Rd. Xindian Dist., New Taipei City, Taiwan Declare that: Name of Representative of Agent: Grace Chen Agent Company name: BTL Inc. Address: 4F.,No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan is authorized to apply for Certification and signing related documents of the following product(s), including application form(s): FCC ID: VTV-M7EDEKA IC: 10524A-M7EDEKA Validity/Expiry Date: 2025-03-17 Signature: Date: 2024-03-18 City: New Taipei City Name: Roger Wu Telephone: +886-3-990-6677 Ext. 5307 E-mail: [email protected]

TSC Auto ID Technology Co., Ltd. Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: VTV-M7EDEKA Items to be covered by Single modular transmitters. Answer from applicant 1.The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. Yes, the modular has own shielding cover. . 2.The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. The modular transmitter have buffered modulation/data inputs. 3.The module must contain power supply regulation on the moduleThe modular transmitter have its own power supply regulation. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). The modular transmitter complies with the antenna requirements of Section 15.203 and 15.204(c). The antenna either be permanently attached. 5.The module must demonstrate compliance in a stand-alone configuration. The module can be configured independently and meets the requirements. 6.The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). The FCC ID on the product: VTV-M7EDEKA . 7.The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. YES, please refer to the user manual. 8.The module must comply with RF exposure requirements.YES, RF exposure statement is attached in the user manual. TSC Auto ID Technology Co., Ltd. Items to be covered by Split modular transmitters. Answer from applicant 1. The modular transmitter must comply with all requirements of a single modular transmitter except for items (1) & (5) of the above single modular approval requirements. N/A 2. Only the radio front end must be shielded. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The interface between the split sections of the modular system must be digital with a minimum signalling amplitude of 150 mV peak-to-peak. N/A 3. Control information and other data may be exchanged between the transmitter control elements and radio front end. N/A 4. The sections of a split modular transmitter must be tested installed in a host device(s) similar to that which is representative of the platform(s) intended for use. N/A 5. Manufacturers must ensure that only transmitter control elements and radio front end components that have been approved together are capable of operating together. The transmitter module must not operate unless it has verified that the installed transmitter control elements and radio front end have been authorized together. Manufacturers may use means including, but not limited to, coding in hardware and electronic signatures in software to meet these requirements, and must describe the methods in their application for equipment authorization. N/A Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): Roger Wu Date: 2024-03-18 Signature:

TSC Auto ID Technology Co., Ltd. Company Name: TSC Auto ID Technology Co., Ltd. Address: 9F., No. 95, Minquan Rd. Xindian Dist. City: New Taipei City Country: Taiwan To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: VTV-M7EDEKA Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 2024-03-18 Name and signature of applicant: Roger Wu Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period\

Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 1 of 14 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 2 of 14 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 3 of 14

Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 4 of 14 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 5 of 14 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 6 of 14 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 7 of 14 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 8 of 14 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 9 of 14 RFID PCB antenna 1 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 10 of 14 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 11 of 14 RFID PCB antenna 2 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 12 of 14 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 13 of 14 RFID PCB antenna 3 Appendix No.: EP-2312T070-1 APPENDIX-EUT PHOTOS Project No.: 2312T070 Page 14 of 14

Report No.: BTL-FCCP-2-2312T070 Project No.: 2312T070 Page 1 of 8 Report Version: R00 FCC RF Exposure Report FCC ID: VTV-M7EDEKA Report No. : BTL-FCCP-2-2312T070 Equipment : UHD RFID Module Model Name : M7E-DEKA, M7E-PICO Brand Name : TSC Applicant : TSC Auto ID Technology Co., Ltd. Address : 9F., No. 95, Minquan Rd. Xindian Dist. New Taipei Standard(s) : 47 CFR § 2.1091 FCC Guidelines for Human Exposure IEEE C95.1 Date of Receipt : 2023/12/18 Date of Test : 2024/1/16 ~ 2024/2/2 Issued Date : 2024/3/14 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Eddie Lee, Engineer Approved by : Jerry Chuang, Supervisor BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-2-2312T070 Project No.: 2312T070 Page 2 of 8 Report Version: R00 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2312T070 Project No.: 2312T070 Page 3 of 8 Report Version: R00 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-2-2312T070 R00 Original Report. 2024/3/14 Valid Report No.: BTL-FCCP-2-2312T070 Project No.: 2312T070 Page 4 of 8 Report Version: R00 1. LIMITS According to § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/controlled exposure is 20 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 6 minutes to determine compliance with occupational/controlled SAR limits. (c) The SAR limits for general population/uncontrolled exposure are 0.08 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 1.6 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit is 4 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 30 minutes to determine compliance with general population/uncontrolled SAR limits. (e) Limits for Maximum Permissible Exposure (MPE) to radiofrequency electromagnetic fields (Table 1). Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *(100) ≤6 3.0-30 1842/f 4.89/f *(900/f 2 ) <6 30-300 61.4 0.163 1.0 <6 300-1.500 f/300 <6 1.500-100.000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) <30 1.34-30 824/f 2.19/f *(180/f 2 ) <30 30-300 27.5 0.073 0.2 <30 300-1.500 f/1500 <30 1.500-100.000 1.0 <30 f = frequency in MHz. * = Plane-wave equivalent power density. Report No.: BTL-FCCP-2-2312T070 Project No.: 2312T070 Page 5 of 8 Report Version: R00 2. APPLIED EXEMPTION CRITERIA Refer to KDB 447498 D04, ticked item is applied: For RF Exposure Test Exemptions for Single Source: ☐ 1-mW Test Exemption Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable devi…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2312T070 Project No.: 2312T070 Page 1 of 63 Report Version: R00 FCC Radio Test Report FCC ID: VTV-M7EDEKA Report No. : BTL-FCCP-1-2312T070 Equipment : UHD RFID Module Model Name : M7E-DEKA, M7E-PICO Brand Name : TSC Applicant : TSC Auto ID Technology Co., Ltd. Address : 9F., No. 95, Minquan Rd. Xindian Dist. New Taipei Radio Function : RFID UHF (920 - 928 MHz) FCC Rule Part(s) : FCC CFR Title 47, Part 15, Subpart C (15.247) Measurement Procedure(s) : ANSI C63.10-2013 Date of Receipt : 2023/12/18 Date of Test : 2024/1/16 ~ 2024/2/2 Issued Date : 2024/3/14 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Eddie Lee, Engineer Approved by : Jerry Chuang, Supervisor BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2312T070 Project No.: 2312T070 Page 2 of 63 Report Version: R00 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2312T070 Project No.: 2312T070 Page 3 of 63 Report Version: R00 CONTENTS REVISON HISTORY 5 1 SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 8 1.4 DUTY CYCLE 9 2 GENERAL INFORMATION 10 2.1 DESCRIPTION OF EUT 10 2.2 TEST MODES 11 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 2.4 SUPPORT UNITS 13 3 AC POWER LINE CONDUCTED EMISSIONS TEST 14 3.1 LIMIT 14 3.2 TEST PROCEDURE 14 3.3 DEVIATION FROM TEST STANDARD 14 3.4 TEST SETUP 15 3.5 TEST RESULT 15 4 RADIATED EMISSIONS TEST 16 4.1 LIMIT 16 4.2 TEST PROCEDURE 17 4.3 DEVIATION FROM TEST STANDARD 17 4.4 TEST SETUP 17 4.5 EUT OPERATING CONDITIONS 18 4.6 TEST RESULT – BELOW 30 MHZ 19 4.7 TEST RESULT – 30 MHZ TO 1 GHZ 19 4.8 TEST RESULT – ABOVE 1 GHZ 19 5 NUMBER OF HOPPING CHANNEL 20 5.1 LIMIT 20 5.2 TEST PROCEDURE 20 5.3 DEVIATION FROM STANDARD 20 5.4 TEST SETUP 20 5.5 EUT OPERATION CONDITIONS 20 5.6 TEST RESULTS 20 6 AVERAGE TIME OF OCCUPANCY (DWELL TIME) 21 6.1 LIMIT 21 6.2 TEST PROCEDURE 21 6.3 DEVIATION FROM STANDARD 21 6.4 TEST SETUP 21 6.5 EUT OPERATION CONDITIONS 21 6.6 TEST RESULTS 21 7 HOPPING CHANNEL SEPARATION MEASUREMENT 22 7.1 LIMIT 22 7.2 LIMIT 22 7.3 TEST PROCEDURE 22 7.4 DEVIATION FROM STANDARD 22 7.5 TEST SETUP 22 7.6 TEST RESULTS 22 Report No.: BTL-FCCP-1-2312T070 Project No.: 2312T070 Page 4 of 63 Report Version: R00 8 20 DB BANDWIDTH TEST 23 8.1 LIMIT 23 8.2 TEST PROCEDURE 23 8.3 DEVIATION FROM STANDARD 23 8.4 TEST SETUP 23 8.5 EUT OPERATION CONDITIONS 23 8.6 TEST RESULTS 23 9 OUTPUT POWER TEST 24 9.1 LIMIT 24 9.2 TEST PROCEDURE 24 9.3 DEVIATION FROM STANDARD 24 9.4 TEST SETUP 24 9.5 EUT OPERATION CONDITIONS 24 9.6 TEST RESULTS 24 10 ANTENNA CONDUCTED SPURIOUS EMISSION 25 10.1 LIMIT 25 10.2 TEST PROCEDURE 25 10.3 DEVIATION FROM STANDARD 25 10.4 TEST SETUP 25 10.5 EUT OPERATION CONDITIONS 25 10.6 TEST RESULTS 25 11 LIST OF MEASURING EQUIPMENTS 26 12 EUT TEST PHOTO 28 13 EUT PHOTOS 28 APPENDIX A AC POWER LINE CONDUCTED EMISSIONS 29 APPENDIX B RADIATED EMISSIONS - 9 KHZ TO 30 MHZ 34 APPENDIX C RADIATED EMISSIONS - 30 MHZ TO 1 GHZ 39 APPENDIX D RADIATED EMISSIONS - ABOVE 1 GHZ 42 APPENDIX E NUMBER OF HOPPING CHANNEL 49 APPENDIX F AVERAGE TIME OF OCCUPANCY (DWELL TIME) 51 APPENDIX G HOPPING CHANNEL SEPARATION MEASUREMENT 54 APPENDIX H 20dB BANDWIDTH 56 APPENDIX I OUTPUT POWER 59 APPENDIX J ANTENNA CONDUCTED SPURIOUS EMISSION 61 Report No.: BTL-FCCP-1-2312T070 Project No.: 2312T070 Page 5 of 63 Report Version: R00 REVISON HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2312T070 R00 Original Report. 2024/3/14 Valid Report No.: BTL-FCCP-1-2312T070 Project No.: 2312T070 Page 6 of 63 Report Version: R00 1 SUMMARY OF TEST RESULTS Test procedures according to the technical standards. Standard(s) Section Description Test Result Judgement Remark 15.207 AC Power Line Conducted Emissions APPENDIX A Pass ------ 15.205 15.209 15.247(d) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D Pass ------ 15.247(a)(1)(i) Number of Hopping Channel APPENDIX E Pass ------ 15.247(f) Average Time of Occupancy (Dwell Time) APPENDIX F Pass ------ 15.247(a)(1) Hopping Channel S…

Text truncated - open the document above for the full version.

APPROVAL SHEET 承認書 Customer. (公司) : TSC Model NO. (產品型號) : RFID PCB antenna 1 Description(產品描述) :N/A PART NUMBER: (產品料號) : 98-0720061-01LF CustomerNUMBER: (產品料號) :98-0720061-01LF 865MHz Total Resp o n se (d B) -36 -20 -32 -28 -24 Y XZ Azi m uth = 0.0 El evati on = 0.0 Rol l = 0.0 Total Resp o n se (d B) -36 -20 -32 -28 -24 X Z Y Azi m uth = 180.0 El evati on = -90.0 Rol l = -90.0 Total Resp o n se (d B) -36 -20 -32 -28 -24 Z Y X Azi m uth = 90.0 El evati on = 0.0 Rol l = -90.0 902MHz Total Resp o n se (d B) -34 -20 -32 -30 -28 -26 -24 -22 Y XZ Azi m uth = 0.0 El evati on = 0.0 Rol l = 0.0 Total Resp o n se (d B) -34 -20 -32 -30 -28 -26 -24 -22 Z X Y Azi m uth = 180.0 El evati on = -90.0 Rol l = -90.0 Total Resp o n se (d B) -34 -20 -32 -30 -28 -26 -24 -22 Y Z X Azi m uth = 90.0 El evati on = 0.0 Rol l = -90.0 915MHz Total Resp o n se (d B) -36 -22 -34 -32 -30 -28 -26 -24 Y XZ Azi m uth = 0.0 El evati on = 0.0 Rol l = 0.0 Total Resp o n se (d B) -36 -22 -34 -32 -30 -28 -26 -24 X Z Y Azi m uth = 180.0 El evati on = -90.0 Rol l = -90.0 Total Resp o n se (d B) -36 -22 -34 -32 -30 -28 -26 -24 Z Y X Azi m uth = 90.0 El evati on = 0.0 Rol l = -90.0 928MHz Total Resp o n se (d B) -36 -22 -34 -32 -30 -28 -26 -24 Y XZ Azi m uth = 0.0 El evati on = 0.0 Rol l = 0.0 Total Resp o n se (d B) -36 -22 -34 -32 -30 -28 -26 -24 X Z Y Azi m uth = 180.0 El evati on …

Text truncated - open the document above for the full version.