VVOESS-13W-23WSelf-Ballasted lamp

Instruction 0RGHOQXPEHUV(6(:(6(: IUHTXHQF\UDQJH 0+]WR0+] 1. Purpose Zhejiang NVC’s CFL has implemented three phosphors together into one compact fluorescent. It is a new type of light resource of green environment. The product’s applications are practical for supermarkets, shopping centers, retail stores, and gymnasium. 2. Characteristics Zhejiang NVC’s CFL provides instant start, long-life and high lumen output. The lamp is designed to perform up to the industry standards by using less electricity. Lamp can operate under -18 °C below zero degrees Celsius. From NVC’s testing results shows the self ballast lamp only uses 20% of the electricity and it is compared and equivalent to a regular incandescent bulb. 3. Directions 1) For Safety purposes, the lamp fixture must be powered off before being installed, changed or being cleaned 2) This self ballast lamp cannot be operated with dimmer device. In order to keep the lamp’s high performance it should be used in defined voltage. 3) This Lamp can be performed under environmental areas in temperature from -18° C to 45° C, it cannot be used in enclosed fixture or wet areas. 4). Please check the power, voltage and contacts of the lamp incase the lamp performs abnormal signs such as the light blinking or the light turns off suddenly 5). Do not hold the tube by the hands while changing or cleaning the lamp. The proper way is to hold the lamp by the plastic housing. 4ˊWarnning˖ This device complies with Part 18 of the FCC Rules. This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45–30 MHz. If this occurs, please change outlet or move the lamp far away from other appliance. Zhejiang NVC Lamps Co., Ltd.

V1.0 Page 21 of 24 Report No.: YY10060001 5. External and Internal Photos of the EUT 5.1. External photos of the EUT ESE-13W: ESE-23W

V1.0 Page 22 of 24 Report No.: YY10060001 5.2. Internal photos of the EUT ESE-13W: V1.0 Page 23 of 24 Report No.: YY10060001 ESE-23W: V1.0 Page 24 of 24 Report No.: YY10060001 ...................... End Of Report.........................

TEST REPORT FCC Rules and Regulations Part 18 2009 Industrial, scientific, and medical equipment – Limits and methods of measurement Report Reference No......................: YY10060001 Compiled by ( position+printed name+signature)..: File administrator Mellen Lee ...................................................... Supervised by ( position+printed name+signature)..: Technique principal Tony Jiang ...................................................... Approved by ( position+printed name+signature)..: Manager Jimmy Li ...................................................... Date of issue.....................................: Jun 21, 2010 Testing Laboratory Name..............: Shenzhen Huatongwei International Inspection Co., Ltd Address.............................................: Keji Nan No.12 Road, Hi-tech Park, Shenzhen, China Testing location/ procedure ..............: Full application of Harmonised standards Partial application of Harmonised standards Other standard testing methods Applicant’s name............................: ZHEJIANG NVC LAMPS CO., LTD Address.............................................: No201-16, Tongda Road, South Zone, Hushan District, Jiangshan, zhejiang, china Test specification: Standard ...........................................: FCC Rules and Regulations Part 18 2009 Non-standard test method..............: / Test Report Form No......................: HTWEMCFCC_1A TRF Originator ..................................: Shenzhen Huatongwei International Inspection Co., Ltd Master TRF.......................................: Dated 2006-06 Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................... : Energy saving lamp Trade Mark .......................................: NVC Manufacturer ....................................: ZHEJIANG NVC LAMPS CO., LTD Model/Type reference.......................: ESE-13W, ESE-23W Trade Mark .......................................: / Ratings..............................................: 120V 60Hz Result................................................: Positive V1.0 Page 2 of 24 Report No.: YY10060001 EMC -- T E S T R E P O R T Test Report No. : YY10060001 Jun 21, 2010 ______________________________________________________________________________________________ Date of issue Equipment under Test : Energy saving lamp Model / Type : ESE-13W, ESE-23W Listed Model : / Applicant : ZHEJIANG NVC LAMPS CO., LTD Address : No201-16, Tongda Road, South Zone, Hushan District, Jiangshan, zhejiang, china Manufacturer : ZHEJIANG NVC LAMPS CO., LTD Address : No201-16, Tongda Road, South Zone, Hushan District, Jiangshan, zhejiang, china Test Result according to the standards on page 4: Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 3 of 24 Report No.: YY10060001 Contents 1. TEST STANDARDS .................................................................... 4 2. SUMMARY............................................................................... 5 2.1. General Remarks 5 2.2. Equipment Under Test 5 2.3. Short description of the Equipment under Test (EUT) 5 2.4. EUT operation mode 5 2.5. EUT configuration 5 3. TEST ENVIRONMENT ................................................................. 6 3.1. Address of the test laboratory 6 3.2. Test Facility 6 3.3. Environmental conditions 7 3.4. Test Description 7 3.5. Statement of the measurement uncertainty 7 3.6. Equipments Used during the Test 8 4. TEST CONDITIONS AND RESULTS ............................................... 8 4.1. Radiated Emission 8 4.2. Conducted Disturbance 15 5. EXTERNAL AND INTERNAL PHOTOS OF THE EUT ......................... 21 5.1. External photos of the EUT 21 5.2. Internal photos of the EUT 22 V1.0 Page 4 of 24 Report No.: YY10060001 1. TEST STANDARDS The tests were performed according to following standards: FCC Rules and Regulations Part 18 2009 Industrial, scientific, and medical equipment – Limits and methods of measurement V1.0 Page 5 of 24 Report No.: YY10060001 2. SUMMARY 2.1. General Remarks Date of receipt of test sample : Jun 18, 2010 Testing commenced on : Jun 18, 2010 Testing concluded on : Jun 21, 2010 2.2. Equipment Under Test Power supply system utilised Power supply voltage : o 230V / 50 Hz o 115V / 60Hz o 12 V DC o 24 V DC „ Other (specified in blank below) AC 120V / 60Hz 2.3. Short description of the Equipment under Test (EUT) The EUT is an Energy saving lamp. . Serial No.: Prototype 2.4. EUT operation mode The equipment under test was operated during the measurement under the following conditions: Test program (customer specific) Emissions tests.............: According to FCC Rules and Regulations Part 18 2009 and MP-5 1986, searching for the highest disturbance. 2.5. EUT configuration No peripheral devices and interface cables were connected during the measurement. V1.0 Page 6 of 24 Report No.: YY10060001 3. TEST ENVIRONMENT 3.1. Address of the test laboratory Shenzhen Huatongwei International Inspection Co., Ltd Keji Nan No.12 Road, Hi-tech Park, Shenzhen, China Phone: 86-755-26715686 Fax: 86-755-26748089 3.2. Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L1225 Shenzhen Huatongwei International Inspection Co., Ltd has been assessed and proved to be in compliance with CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to …

Text truncated - open the document above for the full version.

ESE-13W SET UP PHOTO ESE-23W SETUP PHOTO