W6YAP300ACCESS POINT

Passtech Co., Ltd. Copyright ⓒ 2017 Passtech Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of Passtech Inc. Any unauthorized use, copy, disclosure or distribution constitutes infringement of Passtech’s intellectual property rights. USER GUIDE ACCESS POINT (AP300_Ethernet Setting) AP300 (ACCESS POINT) User Manual Version: 1.0 2 http://www.esmartlock.com Passtech Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. Passtech provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, Passtech assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating Passtech products. In addition, Passtech assumes no liability and is not responsible for infringement of patents and/or any other intellectual or industrial property rights of third parties, which may result from assistance provided by Passtech. Composition of the information in this manual has been done to the best of our knowledge. Passtech does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. We have our development center in South Korea to provide technical support. For any technical assistance can contact our technical support team as below; E-mail: [email protected] AP300 (ACCESS POINT) User Manual Version: 1.0 3 http://www.esmartlock.com Table of Contents 1. Components Preparation .......................................................... 4 1.1 SETUP Components ...................................................................... 4 1.2 Setting Diagram ............................................................................. 4 2. AP Setting ..................................................................................... 5 2.1 SERVER & AP300 Communication Diagram ................................. 5 2.2 AP Setting ...................................................................................... 5 3. Server Setting ............................................................................. 11 3.1 Server pre-setting (DB Connection) .............................................. 11 3.2 Server Connection ....................................................................... 13 3.3 Server Startup and Shutdown ...................................................... 17 6. Specification ........................................................................... 18 7 Regulatory Statement ............................................................. 19 AP300 (ACCESS POINT) User Manual Version: 1.0 4 http://www.esmartlock.com 1. Components Preparation 1.1 SETUP Components 1.2 Setting Diagram AP300 (ACCESS POINT) User Manual Version: 1.0 5 http://www.esmartlock.com 2. AP Setting 2.1 SERVER & AP300 Communication Diagram 2.2 AP Setting Before creating AP account, please check PC IP and TCP/IP first by running ‘Command Prompt’ and inputting ‘ipconfig’ command as below. ① Open ‘AP300(2Bytes Floor)’. Internet AP300 (ACCESS POINT) User Manual Version: 1.0 6 http://www.esmartlock.com ② Click ‘Search’ button. Mac address and IP of connected AP200 will be shown on AP List. AP300 (ACCESS POINT) User Manual Version: 1.0 7 http://www.esmartlock.com ③ Select an AP which you want to configure from the AP list, and input values in ‘Ethernet Setting’ referring to the description below. Item Description Local IP AP IP Make sure this IP is only assigned to this AP Local Port Assign the port number on your own (Default: 5000) Subnet Input the value (Subnet Mask) checked in Command Prompt Gateway Input the value (Default Gateway) checked in Command Prompt Server IP Input the value (IPv4 Address) checked in Command Prompt Server Port Input the port number as set in Server program (Default 2274) ④ Click ‘Setting’ button to save the information to the selected AP, and check the message ‘Setting OK’ from the message box below. AP300 (ACCESS POINT) User Manual Version: 1.0 8 http://www.esmartlock.com ⑤ Select RF Channel and then click ‘Conn’ button and check the message ‘Connected OK’ from the message box. If it is connected well, ‘WRITE’ and ‘READ’ buttons will be activated. ⑥ Click ‘READ’ button to check current saved information. AP300 (ACCESS POINT) User Manual Version: 1.0 9 http://www.esmartlock.com ⑦ Input values in ‘AP Setting’ referring to the description below. Item Description AP Name AP name that will be inputted into AP Account in Client program Assign AP ID on your own, but do not duplicate Only English alphabet and number are available (Any space or special characters cannot be contained) RF Channel RF Channels you would like to connect (11~25) BUILD Building number (1~50) FLOOR Floor number (1~99) ROOMS Room numbers (1~999) ⑧ Click ‘WRITE’ button to save the information of the selected AP, and check the message ‘Configuration writing OK’ from message box. ⑨ Click ‘READ’ button again to check if the setting values are properly saved. ⑩ If you want to set another AP, follow the steps from ②. ⑪ After setting is completed, click ‘EXIT’ to close the window. ⑫ Click ‘New’ button from AP account window to enter new information. ⑬ Input the following items and click ‘Save’ button to save the entered information. AP300 (ACCESS POINT) User Manual Version: 1.0 10 http://www.esmartlock.com Item Description AP Name Input AP Name which you set in AP Settings Server IP Update F…

Text truncated - open the document above for the full version.

Date : Nov. 9, 2017 Rev : 2.3 HACS-F004 FCC Agent Authorization Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC FCC Agent Authorization Letter Date : Nov. 9, 2017 Rev : 2.3 HACS-F004 FCC Agent Authorization Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC REVISION TABLE Rev Description of Change Date Approved 1.0 Original Release(Obsolete) 06/14/2012 QM 2.0 Updated template(Obsolete) 10/01/2012 QM 2.1 Updated address(Obsolete) 01/10/2014 QM 2.2 Updated address 11/18/2016 QM 2.3 Fixed Typo “Agent” 11/09/2017 QM PASSTECH CO.,LTD HACS-F004 FCC Agent Authorization Letter Rev : 2.3 DATE : May 25, 2021 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To whom it may concern: Subject : FCC Agent Authorization Letter for FCC ID : W6YAP300 We, the undersigned, hereby authorize HCT CO., LTD. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by HCT CO., LTD. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). We recognize that we are still responsible for the terms and conditions outlined in the HCT America Client Services Agreement. This authorization is valid until further written notice from the applicant. Sincerely, Signed by: (Name / Title) Hyung-Mo Park / CEO (Email Address) [email protected] (Phone number) 82-31-743-7277 (Address) B-402. 215 Galmachi-ro, Jungwon-gu, Seongnam-si, Gyeonggi-do, Rep. of Korea

Date : Nov. 09, 2017 Rev : 3.0 HACS-F003 FCC Confidentiality Request Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC FCC Confidentiality Request Letter Date : Nov. 09, 2017 Rev : 3.0 HACS-F003 FCC Confidentiality Request Letter HCT America LLC ([email protected]) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC REVISION TABLE Rev Description of Change Date Approved 1.0 Original Release(Obsolete) 06/14/2012 QM 2.0 Updated template(Obsolete) 10/01/2012 QM 2.1 Updated address(Obsolete) 01/10/2014 QM 2.2 Updated address 11/18/2016 QM 3.0 Updated LTC and STC Confidentiality table 11/09/2017 QM PASSTECH CO.,LTD HACS-F003 FCC Confidentiality Request Letter Rev : 3.0 DATE : 5/25/2021 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD SUBJECT : Request for Confidentiality for FCC ID : W6YAP300 We hereby request confidential treatment of the information accompanying this application as outlined below: LONG-TERM AND SHORT-TERM CONFIDENTIAL LIST LONG-TERM CONFIDENTIAL Exhibit Description 1 Block Diagram 2 Operational Description 3 Parts List 4 Schematics SHORT-TERM CONFIDENTIAL (180 DAYS) 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User’s Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signed by: (Name / Title) Hyung-Mo Park / CEO (Email Address) [email protected] (Phone number) 82-31-743-7277 (Address) B-402. 215 Galmachi-ro, Jungwon-gu, Seongnam-si, Gyeonggi-do, Rep. of Korea

FCC ID: W6YAP300 HCT CO., LTD 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 7 EXTERNAL PHOTOGRAPHS FCC ID: W6YAP300 HCT CO., LTD 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 7 ■ EXTERNAL PHOTO FCC ID: W6YAP300 HCT CO., LTD 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 7 ■ EXTERNAL PHOTO FCC ID: W6YAP300 HCT CO., LTD 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 7 ■ EXTERNAL PHOTO FCC ID: W6YAP300 HCT CO., LTD 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ５ of 7 ■ EXTERNAL PHOTO FCC ID: W6YAP300 HCT CO., LTD 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ６ of 7 ■ EXTERNAL PHOTO FCC ID: W6YAP300 HCT CO., LTD 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ７ of 7 ■ EXTERNAL PHOTO

● LABEL & LOCATION Model NameMODEL No.FCC IDLABEL Location비고 ACCESS POINTAP300W6YAP300 DEMENSION : 42 x 25mm

FCC ID: W6YAP300 HCT CO., LTD 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page １ of 4 INTERNAL PHOTOGRAPHS FCC ID: W6YAP300 HCT CO., LTD 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ２ of 4 ■ INTERNAL PHOTO FCC ID: W6YAP300 HCT CO., LTD 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ３ of 4 ■ INTERNAL PHOTO FCC ID: W6YAP300 HCT CO., LTD 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383, Rep. of KOREA TEL : + 82 31 645 6300 FAX : + 82 31 645 6401 www.hct.co.kr Page ４ of 4 ■ INTERNAL PHOTO

TEST REPORT FCC MPE Test for AP300 APPLICANT PASSTECH CO., LTD REPORT NO. HCT-RF-2105-FC014 DATE OF ISSUE May 25, 2021 Tested by Jin Gwan Lee Technical Manager Se Wook Park F-TP22-03(Rev.03) HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 F ax. +82 31 645 6401 1 / 5 F-TP22-03 (Rev. 03) Page 2 of 5 HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 TEST REPORT FCC MPE Test for AP300 REPORT NO. HCT-RF-2105-FC014 DATE OF ISSUE May 25, 2021 FCC ID W6YAP300 A pplicantPASSTECH CO., LTD B-402. 215 Galmachi-ro, Jungwon-gu, Seongnam-si, Gyeonggi-do, Rep. of Korea (Zip 13217) Eut Type Model Name ACCESS POINT AP300 FCC IDW6YAP300 Date of ReceiptMay 20, 2021 Frequency range2405 MHz ~ 2480 MHz (Zigbee) The result shown in this test report refer only to the sample(s) tested unless otherwise stated. This test results were applied only to the test methods required by the standard. Report No. HCT-RF-2105-FC014 F-TP22-03 (Rev. 03) Page 3 of 5 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 May 25, 2021 Initial Release The measurements shown in this report were made in accordance with the procedures specified in §2.947. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. HCT CO., LTD. Certifies that no party to this application has subject to a denial of Federal benefits that includes FCC benefits pursuant to section 5301 of the Anti-Drug Abuse Act of 1998,21 U.S. C.853(a) Report No. HCT-RF-2105-FC014 F-TP22-03 (Rev. 03) Page 4 of 5 RF Exposure Statement 1. Limit According to §1.1310, §2.1091 RF exposure is calculated. (B) Limits for General Population/Uncontrolled Exposures Frequency range (MHz) Electric field Strength (V/m) Magnetic field Strength (A/m) Power density (mW/cm²) Averaging time (minutes) 0.3 - 1.34 1.34 - 30 30 - 300 300 - 1500 1500 - 100.000 614 824/f 27.5 ... ... 1.63 2.19/f 0.073 ... ... *(100) *(180/ f²) 0.2 f/1500 1.0 30 30 30 30 30 F = frequency in MHz * = Plane-wave equivalent power density 2. Maximum Permissible Exposure Prediction Prediction of MPE limit at a given distance ଶ S = Power density P = Power input to antenna G = Power gain to the antenna in the direction of interest relative to an isotropic radiator R = Distance to the center of radiation of the antenna Report No. HCT-RF-2105-FC014 F-TP22-03 (Rev. 03) Page 5 of 5 3. RESULTS 3-1. Zigbee Max Peak output Power at antenna input terminal 2.00 dBm Max Peak output Power at antenna input terminal 1.58 mW Prediction distance 20.00 cm Prediction frequency 2405 ˊ 2480 MHz Antenna Gain(typical) 1.000 dBi Antenna Gain(numeric) 1.259 - Power density at prediction frequency( S) 0.0004 mW/cm 2 MPE limit for uncontrolled exposure at prediction frequency 1.0000 mW/cm 2 2.1091 EIRP 3.00 (dBm) ERP 0.85 (dBm) ERP 0.001 (W) ERP Limit 3.00 (W) MARGIN 33.92 (dB)

TEST REPORT FCC Zigbee Test for AP300 APPLICANT PASSTECH CO., LTD REPORT NO. HCT-RF-2105-FC013 DATE OF ISSUE May 25, 2021 Tested by Jin Gwan Lee Technical Manager Se Wook Park F-TP22-03(Rev.03) HCT CO., LTD. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 F ax. +82 31 645 6401 1 / 65 F-TP22-03 (Rev. 03) Page 2 of 65 HCT Co., Ltd. 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, 17383 KOREA Tel. +82 31 634 6300 Fax. +82 31 645 6401 TEST REPORT FCC Zigbee Test for AP300 REPORT NO. HCT-RF-2105-FC013 DATE OF ISSUE May 25, 2021 FCC ID W6YAP300 A pplicantPASSTECH CO., LTD B-402. 215 Galmachi-ro, Jungwon-gu, Seongnam-si, Gyeonggi-do, Rep. of Korea (Zip 13217) Eut Type Model Name ACCESS POINT AP300 Peak Output Power1.64 dBm (1.46 mW) Modulation typeO-QPSK FCC ClassificationDigital Transmission System(DTS) FCC Rule Part(s) Part 15.247 The result shown in this test report refer only to the sample(s) tested unless otherwise stated. This test results were applied only to the test methods required by the standard. Report No. HCT-RF-2105-FC013 F-TP22-03 (Rev. 03) Page 3 of 65 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 May 25, 2021 Initial Release Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules under normal use and maintenance. measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules under normal use and maintenance. Report No. HCT-RF-2105-FC013 F-TP22-03 (Rev. 03) Page 4 of 65 CONTENTS 1. EUT DESCRIPTION5 2. TEST METHODOLOGY6 EUT CONFIGURATION 6 EUT EXERCISE 6 GENERAL TEST PROCEDURES 6 DESCRIPTION OF TEST MODES 6 3. INSTRUMENT CALIBRATION7 4. FACILITIES AND ACCREDITATIONS7 FACILITIES 7 EQUIPMENT 7 5. ANTENNA REQUIREMENTS8 6. MEASUREMENT UNCERTAINTY8 7. DESCRIPTION OF TESTS9 8. SUMMARY OF TEST RESULTS25 9. TEST RESULT26 9.1 DUTY CYCLE & DCCF 26 9.2 BANDWIDTH 27 9.3 OUTPUT POWER 30 9.4 POWER SPECTRAL DENSITY 31 9.5 BAND EDGE/ CONDUCTED SPURIOUS EMISSIONS 34 9.6 RADIATED SPURIOUS EMISSIONS 43 9.7 RADIATED RESTRICTED BAND EDGES 49 9.8 RECEIVER SPURIOUS EMISSIONS 53 9.9 POWERLINE CONDUCTED EMISSIONS 54 11. LIST OF TEST EQUIPMENT62 12. ANNEX A_ TEST SETUP PHOTO65 Report No. HCT-RF-2105-FC013 F-TP22-03 (Rev. 03) Page 5 of 65 1. EUT DESCRIPTION Model AP300 EUT Type ACCESS POINT Manufacturer Name Address PASSTECH CO., LTD B-402. 215 Galmachi-ro, Jungwon-gu, Seongnam-si, Gyeonggi-do, Rep. of Korea (Zip 13217) Factory Name Address PASSTECH CO., LTD B-402. 215 Galmachi-ro, Jungwon-gu, Seongnam-si, Gyeonggi-do, Rep. of Korea (Zip 13217) Power Supply DC Type(Main) 9.0 ~ 24.0 V PoE Type(Sub) 36.0 ~ 57.0 V Frequency Range 2405 MHz ~ 2480 MHz Max. RF Output Power (Peak) 1.64 dBm (1.46 mW) Modulation Type O-QPSK Number of Channels 16 Channels Antenna Specification Antenna type: Helical Antenna Peak Gain : 1 dBi Date(s) of Tests May 14, 2021~ May 20, 2021 Report No. HCT-RF-2105-FC013 F-TP22-03 (Rev. 03) Page 6 of 65 2. TEST METHODOLOGY FCC KDB 558074 D01 15.247 Meas Guidance v05 dated August 24, 2018 entitled ˑguidance for compliance measurements on digital transmission system, frequency hopping spread spectrum system, and hybrid system devices and the measurement procedure described in ANSI C63.10(Version : 2013) ˎthe American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devicesˏ. EUT CONFIGURATION The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. EUT EXERCISE The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.207, 15.209 and 15.247 under the FCC Rules Part 15 Subpart C. GENERAL TEST PROCEDURES Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in Section 6.2 of ANSI C63.10. (Version :2013) Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz using CISPR Quasi-peak and average detector modes. Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above ground plane below 1GHz. Above 1GHz with 1.5m using absorbers between the EUT and receive antenna. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3.75 m away from the receiving antenna, which varied from 1 m to 4 m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the max. emission, the relative positions of this hand-held transmitter (EUT) was rotated through three orthogonal axes according to the requirements in Section 8 of ANSI C63.10. (Version: 2013) Conducted Antenna Terminal See Section from 8.3.(KDB 558074 v05) DESCRIPTION OF TEST MODES The EUT has been tested under operating condition. Test program used to control the EUT for staying in continuous transmitting and receiving mode is programmed. Report No. HCT-RF-2105-FC013 F-TP22-03 (Rev. 03) Page 7 of 65 3. INSTRUMENT CALIBRATION The measuring equipment, which was utilized in …

Text truncated - open the document above for the full version.

The revision history for this document is shown in table. Revision No. Date of Issue Description 0 Initial Release