W93-CPEMAXOD250CPE 2.5GHz

FRC Group Proprietary and Confidential FRC Wimax outdoor CPE – User Manual rev 4 .0 ‐ 1 ‐ WiMAX Outdoor CPE CPEMAX­OD250 User Manual Rev. 4 FRC Group Proprietary and Confidential FRC Wimax outdoor CPE – User Manual rev 4 .0 ‐ 2 ‐ Legal Rights © Copyright 2012 FRC Internet Products, LLC. All rights reserved. The material contained herein is proprietary, privileged, and confidential and owned by FRC Internet Products, LLC (“FRC”), its affiliates or its third party licensors. No disclosure thereof shall be made to third parties without the express written permission of FRC. FRC reserves the right to alter the equipment specifications and descriptions in this publication without prior notice. No part of this publication shall be deemed to be part of any contract or warranty unless specifically incorporated by reference into such contract or warranty. Trade Names FRC®, The Blue Zone®, The BlueZone™, CPEMax™, BSMax™ and/or other products and/or services referenced here in are either registered trademarks or service marks of FRC Group. All other names are or may be the trademarks of their respective owners. “WiMAX Forum” is a registered trademark of the WiMAX Forum. “WiMAX,” the WiMAX Forum logo, “WiMAX Forum Certified,” and the WiMAX Forum Certified logo are trademarks of the WiMAX Forum. Statement of Conditions The information contained in this manual is subject to change without notice. FRC shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or equipment supplied with it. Warranties and Disclaimers All FRC products purchased from FRC or through any of FRC's authorized resellers are subject to the following warranty and product liability terms and conditions. FRC Group Proprietary and Confidential FRC Wimax outdoor CPE – User Manual rev 4 .0 ‐ 3 ‐ Exclusive Warranty (a) FRC warrants that the Product hardware it supplies and the tangible media on which any software is installed, under normal use and conditions, will be free from significant defects in materials and workmanship for a period of twelve (12) months from the date of shipment of a given Product to Purchaser (the "Warranty Period"). FRC will, at its sole option and as Purchaser's sole remedy, repair or replace any defective Product in accordance with FRC' standard R&R procedure. (b) With respect to the Firmware, FRC warrants the correct functionality according to the attached documentation, for a period of twelve (12) month from invoice date (the "Warranty Period")". During the Warranty Period, FRC may release to its Customers firmware updates, which include additional performance improvements and/or bug fixes, upon availability (the "Warranty"). Bug fixes, temporary patches and/or workarounds may be supplied as Firmware updates. Additional hardware, if required, to install or use Firmware updates must be purchased by the Customer. FRC will be obligated to support solely the two (2) most recent Software major releases. FRC SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY PURCHASER'S OR ANY THIRD PERSON'S MISUSE, NEGLIGENCE, IMPROPER INSTALLATION OR IMPROPER TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING OR OTHER HAZARD. Disclaimer (a) The Software is sold on an "AS IS" basis. FRC, its affiliates or its licensors MAKE NO WARRANTIES, WHATSOEVER, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING DOCUMENTATION FRC SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND NON- INFRINGEMENT WITH RESPECT TO THE SOFTWARE. UNITS OF PRODUCT (INCLUDING ALL THE SOFTWARE) DELIVERED TO FRC Group Proprietary and Confidential FRC Wimax outdoor CPE – User Manual rev 4 .0 ‐ 4 ‐ PURCHASER HEREUNDER ARE NOT FAULT-TOLERANT AND ARE NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE OR RESALE IN APPLICATIONS WHERE THE FAILURE, MALFUNCTION OR INACCURACY OF PRODUCTS CARRIES A RISK OF DEATH OR BODILY INJURY OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE ("HIGH RISK ACTIVITIES"). HIGH RISK ACTIVITIES MAY INCLUDE, BUT ARE NOT LIMITED TO, USE AS PART OF ON-LINE CONTROL SYSTEMS IN HAZARDOUS ENVIRONMENTS REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT MACHINES, WEAPONS SYSTEMS OR OTHER APPLICATIONS REPRESENTING A SIMILAR DEGREE OF POTENTIAL HAZARD. FRC SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES. (b) PURCHASER'S SOLE REMEDY FOR BREACH OF THE EXPRESS WARRANTIES ABOVE SHALL BE REPLACEMENT OR REFUND OF THE PURCHASE PRICE AS SPECIFIED ABOVE, AT FRC'S OPTION. TO THE FULLEST EXTENT ALLOWED BY LAW, THE WARRANTIES AND REMEDIES SET FORTH IN THIS AGREEMENT ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO WARRANTIES, TERMS OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, NON-INFRINGEMENT, AND ACCURACY OF INFORMATION GENERATED. ALL OF WHICH ARE EXPRESSLY DISCLAIMED. FRC' WARRANTIES HEREIN RUN ONLY TO PURCHASER, AND ARE NOT EXTENDED TO ANY THIRD PARTIES. FRC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. Limitation of Liability (a) FRC SHALL NOT BE LIABLE TO THE PURCHASER OR TO ANY THIRD PARTY, FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR FRC Group Proprietary and Confidential FRC Wimax outdoor CPE – User Manual rev 4 .0 ‐ 5 ‐ CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER ARISING UND…

Text truncated - open the document above for the full version.

Declaration of Authorization We Name: FRC INTERNET PRODUCTS, LLC Address: 4421 SW 85th Way City: Gainesville State: Florida Zip Code: 32608 Country: USA Declare that: Name Representative of agent: Neil Yeh Agent Company name: QuieTek Corporation Address: 2F, No. 345, Xinhu 2nd Rd., Neihu District, City: Taipei City 114, Country: Taiwan, R.O.C. is authorized to apply for Certification of the following product(s): Product description: CPE 2.5GHz Outdoor Type designation: CPEMax-OD250 Trademark: FRC FCC ID: W93-CPEMAXOD250 on our behalf. Date: 2012/ 02/ 09 City: Hsinchu Signature: Susan Raji, Vice President/General Manager FRC INTERNET PRODUCTS, LLC Tel: 641-424-0370 ext. 280 Fax: 641-424-1945 E-mail: [email protected]

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: W93-CPEMAXOD250 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type Block Diagram Schematics Operational Description Tune-Up Procedure Parts List (BOM) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application.

Attestation for FCC Declaration of Conformity FCC ID: W93-CPEMAXOD250 Data: FEB. 09, 2012 Please be notified that we, the undersigned, FRC INTERNET PRODUCTS, LLC declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DoC. The test report number supporting the DoC is 11C280R- RFUSP24V02-A. Testing in regards to this report was done by QuieTek Corporation, located at 2F, No.345, Xinhu 2nd Rd., Neihu District,, Taipei Taiwan, which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, Susan Raji, Vice President/General Manager FRC INTERNET PRODUCTS, LLC Tel: 641-424-0370 ext. 280 Fax: 641-424-1945 E-mail: [email protected]

Report No：11C280R-RFUSP35V01 Page: 86 of 94 Attachement EUT Photograph (1) EUT Photo (2) EUT Photo

FRC 4421 SW 85th Way, Gainesville, Florida 32608, USA FCC ID.: W93-CPEMAXOD250 FCC ID AND DoC Label The FCC Label will be placed on the equipment as shown in the photograph below. CPE 2.5GHz Outdoor Model No.: CPEMax-OD250 FCC ID : W93-CPEMAXOD250 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan Trade name: FRC Model number.: CPEMax-OD250

FRC 4421 SW 85th Way, Gainesville, Florida 32608, USA FCC ID.: W93-CPEMAXOD250 FCC ID AND DoC Label The FCC Label will be placed on the equipment as shown in the photograph below. CPE 2.5GHz Outdoor Model No.: CPEMax-OD250 FCC ID : W93-CPEMAXOD250 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan Trade name: FRC Model number.: CPEMax-OD250

Report No：11C280R-RFUSP35V01 Page: 87 of 94 (3) EUT Photo (Adapter) (4) EUT Photo Report No：11C280R-RFUSP35V01 Page: 88 of 94 (5) EUT Photo (6) EUT Photo Report No：11C280R-RFUSP35V01 Page: 89 of 94 (7) EUT Photo (8) EUT Photo Report No：11C280R-RFUSP35V01 Page: 90 of 94 (9) EUT Photo (10) EUT Photo Report No：11C280R-RFUSP35V01 Page: 91 of 94 (11) EUT Photo (12) EUT Photo Report No：11C280R-RFUSP35V01 Page: 92 of 94 (13) EUT Photo (14) EUT Photo Report No：11C280R-RFUSP35V01 Page: 93 of 94 (15) EUT Photo (16) EUT Photo-ANT Report No：11C280R-RFUSP35V01 Page: 94 of 94 (17) EUT Photo-ANT

Report No. 11C280R-RF-US-Exp Page: 1 of 3 RF Exposure Evaluation declaration Product Name ：CPE 2.5GHz Outdoor Model No. ：CPEMax-OD250 FCC ID. ：W93-CPEMAXOD250 Applicant : FRC INTERNET PRODUCTS, LLC Address : 4421 SW 85th Way, Gainesville, Florida 32608, USA Date of Receipt : 2011/12/14 Date of Declaration : 2013/01/31 Report No. : 11C280R-RF-US-Exp Report Version : V1.0 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No. 11C280R-RF-US-Exp Page: 2 of 3 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. Report No. 11C280R-RF-US-Exp Page: 3 of 3 1.3. Test Result of RF Exposure Evaluation Product CBS 2.5GHz Test Mode Mode 1: Transmit Test Condition RF Exposure Evaluation Antenna Gain The maximum Gain measured in fully anechoic chamber is 16dB or 39.81 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: 5MHz Bandwidth Channel Channel Frequency (MHz) Output Power to Antenna (dBm) Output Power to Antenna (mW) Power Density at R = 100 cm(mW/cm 2 ) Low 2498.5 22.21 166.34 0.05 Middle 2593 22.46 176.20 0.06 High 2687.5 22.53 179.06 0.06 7MHz Bandwidth Channel Channel Frequency (MHz) Output Power to Antenna (dBm) Output Power to Antenna (mW) Power Density at R = 100 cm(mW/cm 2 ) Low 2499.5 21.8 151.36 0.05 Middle 2593 21.98 157.76 0.05 High 2686.5 22.07 161.06 0.05 10MHz Bandwidth Channel Channel Frequency (MHz) Output Power to Antenna (dBm) Output Power to Antenna (mW) Power Density at R = 100 cm(mW/cm 2 ) Low 2499.5 21.94 156.31 0.05 Middle 2593 22.14 163.68 0.05 High 2686.5 22.26 168.27 0.05 The power density Pd (4th column) at a distance of 100 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm 2 .

Report No：11C280R-RFUSP35V01 Page: 1 of 94 Test Report Product Name：CPE 2.5GHz Outdoor Model No. ：CPEMax-OD250 FCC ID. ：W93-CPEMAXOD250 Applicant ： FRC INTERNET PRODUCTS, LLC Address ： 4421 SW 85th Way, Gainesville, Florida 32608, USA Date of Receipt：2011/12/14 Issued Date ：2013/01/31 Report No. ：11C280R-RFUSP35V01 Report Version ：V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No：11C280R-RFUSP35V01 Page: 2 of 94 Test Report Certification Issued Date : 2013/01/31 Report No. : 11C280R-RFUSP35V01 Product Name ： CPE 2.5GHz Outdoor Applicant ： FRC INTERNET PRODUCTS, LLC Address ： 4421 SW 85th Way, Gainesville, Florida 32608, USA Model No. ： CPEMax-OD250 FCC ID. ： W93-CPEMAXOD250 EUT Voltage : AC 120V / 60Hz Trade Name ： FRC Applicable Standard ： FCC CFR Title 47 Part 2 and Part 27: 2010 Test Result ： Complied The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Documented By : ( Demi Chang / Engineering Adm. Specialist ) Reviewed By : ( JuBo Shen / Engineer ) Approved By : ( Roy Wang / Manager ) Report No：11C280R-RFUSP35V01 Page: 3 of 94 Laboratory Information We, QuieTek Corporation, are an independent RF consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted (audited or listed) by the following related bodies in compliance with ISO 17025 specified testing scopes: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site:http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory: No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory: No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Taiwan R.O.C. : TAF, Accreditation Number: 1313 NCC, Certificate No : NCC-RCB-07 USA : FCC, Registration Number: 365520 Canada : IC, Submission No: 150981 Report No：11C280R-RFUSP35V01 Page: 4 of 94 TABLE OF CONTENTS Description Page 1. General Information ..................................................................................................... 6 1.1. EUT Description ............................................................................................................. 6 1.2. Operational Description .................................................................................................. 7 1.3. Test Mode .......................................................................................................................8 1.4. Tested System Details .................................................................................................... 9 1.5. Configuration of tested System ...................................................................................... 9 1.6. EUT Exercise Software .................................................................................................. 9 1.7. Summary of Test Result ............................................................................................... 10 2. Transmitter Output Power ......................................................................................... 11 2.1. Test Equipment............................................................................................................. 11 2.2. Test Setup .................................................................................................................... 11 2.3. Limits ............................................................................................................................ 11 2.4. Test Procedure ............................................................................................................. 11 2.5. Uncertainty ................................................................................................................... 11 2.6. Test Result....................................................................................................................12 3. Occupied Bandwidth.................................................................................................. 19 3.1. Test Equipment............................................................................................................. 19 3.2. Test Setup .................................................................................................................... 19 3.3. Limits ............................................................................................................................ 19 3.4. Test Procedure ............................................................................................................. 19 3.5. Uncertainty ................................................................................................................... 19 3.6. Test Result....................................................................................................................20 4. Channel Edge ............................................................................................................. 26 4.1. Test Equipment............................................................................................................. 26 4.2. Test Setup .................................................................................................................... 26 4.3. Limits ....................................................................................…

Text truncated - open the document above for the full version.

Report No：11C280R-RFUSP35V01 Page: 75 of 94 6.7. Test Photo Test Mode ： Mode 1: Transmit Description： Front View of Radiated Emission Test Setup (Bilog) Test Mode ： Mode 1: Transmit Description： Back View of Radiated Emission Test Setup (Bilog) Report No：11C280R-RFUSP35V01 Page: 76 of 94 Test Mode ： Mode 1: Transmit Description： Front View of Radiated Emission Test Setup (Horn) Test Mode ： Mode 1: Transmit Description： Back View of Radiated Emission Test Setup (Horn)