WCHWAVEBTFSKWAVE 140 POWER SUPPLY

FCC Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING – RF EXPOSURE COMPLIANCE: This equipment should be installed and operated with a minimum distance of 10 cm between the radiator and your body. IC Statements • This Class B digital apparatus complies with Canadian ICES-003. • Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1) L’appareil ne doit pas produire de brouillage. 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. AVERTISSEMENT – CONFORMITÉ AUX NORMES D'EXPOSITION AUX RF : Cet équipement doit être installé et utilisé à une distance minimale de 10 cm entre le radiateur et votre corps. 8159100

8151950 COMM. 12 Robotic Pool Cleaner EN User Instructions 2 COMM. 12 Robotic Pool Cleaner | User Manual Table of Contents 1. IMPORTANT SAFETY INSTRUCTIONS ...............................................................3 2. FCC STATEMENT ......................................................................................................4 3. SPECIFICATIONS AND WATER CONDITIONS...................................................4 4. Package CONTENTS ..............................................................................................4 5. ASSEMBLY INSTRUCTIONS...................................................................................5 6. DAILY OPERATION ..................................................................................................6 7. REMOTE CONTROL UNIT........................................................................................7 8. CLEANING THE FILTER ..........................................................................................8 COMM. 12 Robotic Pool Cleaner User Manual 3 COMM. 12 Robotic Pool Cleaner | User Manual 1. IMPORTANT SAFETY INSTRUCTIONS WARNING Take the Robotic Pool Cleaner out of the pool before allowing people to enter the pool. WARNING When examining the Robotic Pool Cleaner, disconnect the main power supply. WARNING Ensure that children do not attempt to access Robotic Pool Cleaner while it is operating. WARNING Keep the Robotic Pool Cleaner out of the reach of children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. WARNING Only an original power cable must be used, at all times. Replaced by a Robotic Pool Cleaner certified technician, in case of need to avoid hazard. WARNING The unit must be connected only to a supply circuit that is protected by a ground-fault circuit interrupter (GFCI). This GFCI should be tested on a routine basis. To test the GFCI, push the test button. The GFCI should interrupt power. Push the reset button. Power should be restored. If the GFCI fails to operate in this manner, the GFCI is defective. If the GFCI interrupts power to the power unit without the test button being pushed, a ground current may be flowing, indicating the possibility of an electric shock. Do not use the power unit. Disconnect the power unit and contact the manufacturer for assistance. WARNING To reduce the risk of electric shock replace damaged cord immedietely. Do not use extension cord to connect unit to electric supply; provide a properly located outlet. WARNING Keep the Robotic Pool Cleaner out of the reach of children or persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Please ensure that the following PRECAUTIONS are implemented: CAUTION Only a trained operator should operate the Robotic Pool Cleaner. CAUTION Operator should keep hands away from driving belt mechanism. CAUTION Position the Caddy and power supply at least 3.5 m (12 ft) from pool’s edge – during operation. CAUTION For continued protection against possible electric shock, the power supply unit should be placed at least 11 cm (4 in) above ground. READ AND FOLLOW ALL INSTRUCTIONS. Please adhere strictly to the following WARNINGS: 4 COMM. 12 Robotic Pool Cleaner | User Manual 2. FCC STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Maytronics Ltd.) could void the user’s authority to operate the equipment. 3. SPECIFICATIONS AND WATER CONDITIONS • Motor protection: IP 68 • Minimum depth: 0.4 m (1.33 ft) • Maximum depth: 5 m (16.4 ft) 4. PACKAGE CONTENTS Carefully remove all the items from the shipping box and check them against the packing list. You should have: • Documentation and accessories • Un-assembled Caddy for storing and carrying the Robotic Pool Cleaner • Robotic Pool Cleaner and floating cable • Power supply unit assembled to the Caddy base • Remote control unit and remote control clip Power supply • Input: 100 VAC - 250 VAC • 50 Hz - 60 Hz • Output: <30 VDC • IP 54 Use the Pool Cleaner in the following water conditions only: • Chlorine: 4 ppm max. • pH: 7.0 - 7.8 • Temperature: 6°C - 35°C (43°F - 95°F) • NaCl: 5000 ppm max. CAUTION When lifting the Robotic Pool Cleaner, take care to prevent back injury. CAUTION Do not bury cord - locate cord to minimize abuse from lawn mowers, hedge trimmers and other equipment. CAUTION This Robot is for use with permanently installed pools. Do not use with storable pools. A permanently installed pool is constructed in or on the ground or in building such that it cannot be readily disassembled for storage and reassembled to its original integrity. SAVE THESE INSTRUCTIONS 5 COMM. 12 Robotic Pool Cleaner | User Manual 5. ASSEMBLY INSTRUCTIONS 1. Attach the Caddy handle to…

Text truncated - open the document above for the full version.

Covered list attestation FCC application letter Kiwa RF_755_02 Page 1 of 2 15-02-2023 z Certification Application Attestation Statements Maytronics Ltd. Kibbutz Yizre’el, Israel Subject: FCC ID: WCHWAVEBTFSK To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) [Maytronics Ltd.] certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) [Maytronics Ltd.] (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 29-Mar-23 City: Kibbutz Yizre’el Name (2) : Yair Hadari Function: CTO Telephone number: +972 4659 8359 Email address: [email protected] Signature: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK” Covered list attestation FCC application letter Kiwa RF_755_02 Page 2 of 2 15-02-2023 z Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 07-02-2023 1 st version RvM 02 1 15-02-2023 Changed Applicant to Company and added “Subject: FCC ID: “ RvdM Issued/modified by : Richard van de Meer Function : Certification assessor Revision 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : ---- 02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : ---- 02-2023

V02072023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03/20/2023 Ref: Attestation Statement Part 2.911(d)(7) Filing Validity Period: Permanent FCC ID: WCH9995412; WCH99954226-7; WCHLIBERTY; WCHWAVEBTFSK Manufacturer Name Maytronics Ltd. Address Kibbutz Yizre’el, Israel certifies that, as of the dates of this application, Americas Compliance Consulting LLC dba iCertifi “iCertifi” is our designated U.S. agent for service of process for the above referenced FCC ID. We accept to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission-related proceeding involving the equipment. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. iCertifi accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service process for the above: Designated U.S. Agent Information: Name Americas Compliance Consulting, LLC dba iCertifi FCC FRN 0033399411 Address 1001 SW Disk Drive, Suite 250 Bend, Oregon 97702 USA Contact Person Paul Preston Telephone (866) 885-4575 Email [email protected] Sincerely, Maytronics Ltd. Americas Compliance Consulting LLC dba iCertifi Eugene Plotnichenko Paul Preston

August 28, 2023 Telefication B.V. Attn: Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Application for certification for a WAVE 140 POWER SUPPLY, FCC ID: WCHWAVEBTFSK Dear Gentlemen, Please find attached our application for certification for the WAVE 140 POWER SUPPLY, FCC ID: WCHWAVEBTFSK, prepared in accordance with FCC Rules, parts 2 and 15, section 15.247(DTS) and 15.249 (DXT). The product testing and this application for certification were performed by Hermon Laboratories, which is recognized and accredited by FCC, Test Firm Registration Number is 927748, Designation Number is IL1001. Hermon Labs responsible person is Mr. Michael Nikishin, tel: +972 4626 8440, fax:+972 4628 8277, e-mail: [email protected]. We hope this application satisfies your requirements. Please send an invoice to Hermon Labs. Yair Hadari, CTO, Maytronics Ltd.

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: Maytronics Ltd. Address: 1935000, Kibbutz Yizre’el City: Kibbutz Yizre’el Country: Israel To: Telefication B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: WCHWAVEBTFSK Reference number: 49088 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby request non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: in order to avoid exposed of the technology to the competitors Date: August 28, 2023 Name and signature of applicant: Yair Hadari Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 Declaration of Authorization We Name: Maytronics Ltd. Address: Kibbutz Yizre’el City: Kibbutz Yizre’el 1935000 Country: Israel Declare that: Name Representative of agent: (1) Agent Company name: Qualitech Address: 30 Hasibim St, City: Petah Tikva 4959388 Country Israel is authorized to apply for Certification of the following product(s): Product description: WAVE 140 POWER SUPPLY Type designation: 99956027-US Trademark: Maytronics Ltd. Validity/ expiry date July 26, 2024 on our behalf. Date: July 26, 2023 City: Kibbutz Yizre’el Name: Yair Hadari Function: CTO Signature:  . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent. Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 02 1 02-01-2023 History sheet added AG Issued/modified by : Axel Gase Function : Quality Manager Revision : 02 Date : 02-01-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 02-01-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 02-01-2023

Maytronics Ltd. FCC ID: WCHWAVEBTFSK IC: 29982-WAVEBTFSK Page 1 of 3 EXTERNAL PHOTOGRAPHS This document contains 2 photographs Maytronics Ltd. FCC ID: WCHWAVEBTFSK IC: 29982-WAVEBTFSK Page 2 of 3 Photograph No.1 WAVE140 POWER SUPPLY Front view Maytronics Ltd. FCC ID: WCHWAVEBTFSK IC: 29982-WAVEBTFSK Page 3 of 3 Photograph No.2 WAVE140 POWER SUPPLY Rear side view

Page 1 of 1 LABEL The label is affixed on the side panel of the power supply as shown below. The label material is PVC with a permanent adhesive. Page 1 of 1 LABEL LOCATION

Maytronics Ltd. FCC ID: WCHWAVEBTFSK IC: 29982-WAVEBTFSK Page 1 of 4 INTERNAL PHOTOGRAPHS This document contains 2 photographs Maytronics Ltd. FCC ID: WCHWAVEBTFSK IC: 29982-WAVEBTFSK Page 2 of 4 Photograph No.1 WAVE140 POWER SUPPLY Internal view Maytronics Ltd. FCC ID: WCHWAVEBTFSK IC: 29982-WAVEBTFSK Page 3 of 4 Maytronics Ltd. FCC ID: WCHWAVEBTFSK IC: 29982-WAVEBTFSK Page 4 of 4 Photograph No.2 WAVE140 POWER SUPPLY Print side of the main PCB

FCC ID: WCHWAVEBTFSK RF exposure evaluation The WAVE140 PWS includes 2 transmitters operating according to FCC part 15 subpart C section 15.249 and section 15.247 (DTS) The standard section 15.249 does not contain RF Exposure limits. The minimum separation distance of 2cm is ensured by the physical dimensions of the case. The closest point to the transmitting antennas, is 2cm from the power supply top surface (the below picture confirming the above statement). FCC SAR test exclusion threshold is calculated according to 447498D04 Interim General RF Exposure Guidance, equation B.2: Maximum BLE measured transmitter power obtained from test report QT-MAYEMC_FCC.49088_TR Rev.2: Pout ERP Maximum antenna gain, dBd Pout conducted dBm mW dBm mW -3.70 0.43 1.15 -4.85 0.32 The MPE exemption condition in terms of ERP at 2480 MHz frequency and 0.02cm separation distance relates is 38.1mW threshold, so BLE is exempt and no evaluation is required. Based on the above the product can be considered complying with the RF exposure limitations. RF_exposure_49088_Rev2.doc 2/2 10-Oct-23

Hermon Laboratories Ltd. P.O. Box 23, Binyamina 3055001, Israel Tel. +972 4628 8001 Fax. +972 4628 8277 E-mail: [email protected] Page 1 of 21 Report ID: MAYEMC_FCC_ICES_49057_WAVE140.doc Date of Issue: 29-Jun-23 ELECTRICAL TESTING 0839.01 TEST REPORT ACCORDING TO: FCC 47CFR part 15: 2021, subpart B, Class B ICES-003: 2020 Issue 7, Class B FOR: MAYTRONICS LTD Robotic pool cleaner system Model: WAVE140 This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: MAYEMC_FCC_ICES_49057_WAVE140.doc Date of Issue: 29-Jun-23 Page 2 of 21 Table of contents 1 Applicant information ..................................................................................................................................................... 3 2 Equipment under test attributes .................................................................................................................................... 3 3 Manufacturer information .............................................................................................................................................. 3 4 Test details .................................................................................................................................................................... 3 5 Tests summary .............................................................................................................................................................. 4 6 EUT description ............................................................................................................................................................. 5 6.1 General information ....................................................................................................................................................... 5 6.2 EUT system parts .......................................................................................................................................................... 5 6.3 EUT modes/configurations ............................................................................................................................................ 5 6.4 Ports and lines .............................................................................................................................................................. 5 6.5 Auxiliary equipment ....................................................................................................................................................... 5 6.6 Operating frequencies ................................................................................................................................................... 5 6.7 Test configuration .......................................................................................................................................................... 5 7 Emissions tests according to FCC 47CFR part 15 subpart B and ICES-003 requirements ........................................... 6 7.1 Conducted emissions .................................................................................................................................................... 6 7.2 Radiated emission measurements .............................................................................................................................. 10 8 APPENDIX A Test equipment and ancillaries used for tests ....................................................................................... 15 9 APPENDIX B Test laboratory description .................................................................................................................... 16 10 APPENDIX C Abbreviations and acronyms ................................................................................................................ 17 11 APPENDIX D Test equipment correction factors ........................................................................................................ 18 12 APPENDIX E Measurement uncertainties ................................................................................................................... 21 13 APPENDIX F Specification references ........................................................................................................................ 21 Report ID: MAYEMC_FCC_ICES_49057_WAVE140.doc Date of Issue: 29-Jun-23 Page 3 of 21 1 Applicant information Client name: MAYTRONICS LTD Address: Kibbutz Yizre'el 1836000, Israel Telephone: +972 (0)4-6598111 Fax: +972 (0)4-6522485 E-mail: [email protected] Contact name: Mr. Eugene Plotnichenko 2 Equipment under test attributes Product name: Robotic pool cleaner system Model: WAVE140 Part number: 99997140 Serial number: W90919WBAM Receipt date: 21-Dec-22 3 Manufacturer information Manufacturer name: MAYTRONICS LTD Address: Kibbutz Yizre'el 1836000, Israel Telephone: +972 (0)4-6598111 Fax: +972 (0)4-6522485 E-mail: [email protected] Contact name: Mr. Eugene Plotnichenko 4 Test details Project ID: 49057 Location: Hermon Laboratories Ltd. P.O. Box 23, Binyamina 3055001, Israel Test started: 21-Dec-22 Test completed: 21-Dec-22 Test specifications: FCC 47CFR part 15: 2021, subpart B, Class B ICES-003: 2020 Issue 7, Class B Report ID: MAYEMC_FCC_ICES_49057_WAVE140.doc Date of Issue: 29-Jun-23 Page 4 of 21 5 Tests summary Test Status FCC 47 CFR part 15, subpart B FCC 47 CFR, Section 15.107, Class B, AC power lines conducted emissions Pass FCC 47 CFR, Section 15.109, Class B, Radiated emissions Pass ICES-003 ICES-003, Section 3.2.1, Class B, AC power lines conducted emissions Pass ICES-003, Section 3.2.2, Class B, Radiated emissions Pass Testing was completed …

Text truncated - open the document above for the full version.

Radio Test Report Test Report No: QT-MAYEMC_FCC.49088_TR Rev.3 Issued on: October 11, 2023 Product Name WAVE140 POWER SUPPLY FCC ID: WCHWAVEBTFSK IC: 29982-WAVEBTFSK Tested According to FCC 47CFR part 15 subpart C §15.247 RSS-247 Issue 2:2017, RSS-Gen Issue 5 Tests Performed for Maytronics Ltd. Kibbutz Yizre’el 1935000 Israel Tel.: +972-4-6598111 QualiTech EMC Laboratory 43 Hasivim Street, POB 7500 Petah-Tikva, 4951169, Israel Tel: +972-4-6268494 QT-MAYEMC_FCC. 49088_TR Date: 11.10.2023, Rev. 3 Maytronics Ltd. Page 2 of 56 WAVE140 POWER SUPPLY The information contained herein is the property of QualiTech, EMC Lab and is supplied without liability for errors or omissions. The copyright for this document vests in QualiTech, EMC Lab. All rights reserved. This Test Report may not be reproduced, by any method, without the written permission of the QualiTech, EMC Lab. If and when such permission is granted, the report must be reproduced only in the full format. Test Personnel Testing performed by Izak Shtier Ortal Kleinman Test report prepared by Bina Talkar Test report reviewed by Michael Gudovsky Test report approved by Michael Nikishin Group Manager QT-MAYEMC_FCC. 49088_TR Date: 11.10.2023, Rev. 3 Maytronics Ltd. Page 3 of 56 WAVE140 POWER SUPPLY Test Report details: Test commencement date: 18.01.2023 Test completion date: 27.06.2023 Applicant’s representative: Eugene Plotnichenko Issued on: 11.10.2023 Revision details: Version Date Details/Reasons Rev. 1 02.07.2023 - Rev.2 19.07.2023 Added on the first page of the test report, updated EUT name, FCC ID and IC. Rev.3 11.10.2023 Updated test setup on page 9. Assessment information: This report contains an assessment of the EUT against Electromagnetic Compatibility based upon tests carried out on the samples submitted. The results contained in this report relate only to the items tested. Manufactured products will not necessarily give identical results due to production and measurement tolerances. QualiTech, EMC Lab does not assume responsibility for any conclusion and generalization drawn from the test results with regards to other specimens or samples of type of the equipment represented by test item. The EUT was setup and exercised using the configuration, modes of operation and arrangements defined in this report only. Modifications: Modifications made to the EUT None Modifications made to the Test Standard None QT-MAYEMC_FCC. 49088_TR Date: 11.10.2023, Rev. 3 Maytronics Ltd. Page 4 of 56 WAVE140 POWER SUPPLY Summary of Compliance Status The EUT was tested according to the following test methods. Test results are given in full in section 3-8. Test Case Verdict Minimum 6 dB bandwidth Pass Field strength of spurious emissions Pass Peak output power Pass Band edge radiated emissions Pass Peak spectral power density Pass Conducted emissions Pass QT-MAYEMC_FCC. 49088_TR Date: 11.10.2023, Rev. 3 Maytronics Ltd. Page 5 of 56 WAVE140 POWER SUPPLY Table of Contents 1. GENERAL .......................................................................................................................................................... 6 1.1. Referenced documents: ..................................................................................................................... 6 1.2. EUT description: ............................................................................................................................... 7 1.2.1. General Description: ............................................................................................................................. 7 1.3. Transmitter characteristics ................................................................................................................ 7 2. TEST FACILITY & UNCERTAINTY OF MEASUREMENT ..................................................................... 8 2.1. Accreditation/ Registration reference: .............................................................................................. 8 2.2. Test Facility description .................................................................................................................... 8 2.3. The measurement software used: ...................................................................................................... 8 3. MINIMUM 6 DB BANDWIDTH ...................................................................................................................... 9 3.1. General .............................................................................................................................................. 9 3.2. Test procedure ................................................................................................................................... 9 4. FIELD STRENGTH OF SPURIOUS EMISSIONS ...................................................................................... 13 4.1. General ............................................................................................................................................ 13 4.2. Test procedure for spurious emission field strength measurements in 9 kHz to 30 MHz band...... 13 4.3. Test procedure for spurious emission field strength measurements…

Text truncated - open the document above for the full version.