WL6-BR45IIX6230Notebook Computer

i Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This equipment is without ad hoc mode function. i Preface  Copyright 2011 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Limitation of Liability While reasonable efforts have been made to ensure the accuracy of this manual, the manufacturer and distributor assume no liability resulting from errors or omissions in this manual, or from the use of the information contained herein. Notice: C C h h a a n n g g e e s s o o r r m m o o d d i i f f i i c c a a t t i i o o n n s s n n o o t t e e x x p p r r e e s s s s l l y y a a p p p p r r o o v v e e d d b b y y t t h h e e p p a a r r t t y y r r e e s s p p o o n n s s i i b b l l e e f f o o r r c c o o m m p p l l i i a a n n c c e e c c o o u u l l d d v v o o i i d d t t h h e e u u s s e e r r ’ ’ s s a a u u t t h h o o r r i i t t y y t t o o o o p p e e r r a a t t e e t t h h e e e e q q u u i i p p m m e e n n t t . . S S h h i i e e l l d d e e d d i i n n t t e e r r f f a a c c e e c c a a b b l l e e s s a a n n d d a a n n o o n n - - s s h h i i e e l l d d e e d d A A C C p p o o w w e e r r c c o o r r d d m m u u s s t t b b e e u u s s e e d d i i n n o o r r d d e e r r t t o o c c o o m m p p l l y y w w i i t t h h e e m m i i s s s s i i o o n n l l i i m m i i t t s s . . This equipment is to be used with power supply: 65W There is no internal power supply. ii Table of Content BEFORE YOU START...............................................................................2 LET YOUR COMPUTER ACCLIMATE ITSELF............................................ 12 HEAT, COLD, HUMIDITY, AND GLARE.................................................. 13 SUITABLE PLACE TO WORK................................................................. 13 INTRODUCTION.....................................................................................15 FRONT VIEW..................................................................................... 16 LEFT VIEWS...................................................................................... 18 RIGHT VIEW...................................................................................... 19 BOTTOM VIEW................................................................................... 20 GETTING STARTED...............................................................................22 CONNECTING THE AC ADAPTER......................................................... 22 TO INSTALL THE BATTERY PACK:........................................................ 24 TO REMOVE THE BATTERY PACK:....................................................... 25 USING THE NOTEBOOK COMPUTER........................................................27 LCD CARE........................................................................................ 27 EXTERNAL CRT DISPLAY................................................................... 27 TOUCHPAD PRECAUTIONS................................................................. 29 DATA STORAGE AND RETRIEVAL........................................................ 30 THE BATTERY POWER SYSTEM.......................................................... 30 PREPARING THE BATTERY PACK FOR USE (BATTERY CALIBRATION) .... 31 AUTOMATIC BATTERY PACK CHARGING FUNCTION.............................. 31 BATTERY STATUS........................................…

Text truncated - open the document above for the full version.

ELITEGROUP COMPUTER SYSTEMS CO., LTD Date: 2011-08-17 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: WL6-BR45IIX6230 To Whom It May Concern: This letter is to ascertain that ELITEGROUP COMPUTER SYSTEMS CO., LTD. Product Notebook Computer has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Signature Welan Chen Title: Section Manager Telephone: 886-2-2299-5668 Email: [email protected] Company Name: ELITEGROUP COMPUTER SYSTEMS CO., LTD Company Address: No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 ELITEGROUP COMPUTER SYSTEMS CO., LTD August 17, 2011 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, ELITEGROUP COMPUTER SYSTEMS CO., LTD hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): (Product description: Notebook Computer Model name: BR45II1 BR45IIX(X=0~9,A~Z OR BLANK) BR40IIX(X=0~9,A~Z OR BLANK) FCC ID: WL6-BR45IIX6230 We affirm that between SIEMIC and ELITEGROUP COMPUTER SYSTEMS CO., LTD, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature Client’s name: Welan Chen Title: Section Manager Telephone: 886-2-2299-5668 Email: [email protected] Company Name: ELITEGROUP COMPUTER SYSTEMS CO., LTD Company Address: No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 1.0 2.0 August – 11 - 2008 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 2.0 ELITEGROUP COMPUTER SYSTEMS CO., LTD August 17, 2011 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: WL6-BR45IIX6230 We hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature: Client’s name / title: Welan Chen/ Section Manager Telephone: 886-2-2299-5668 Email: [email protected] Company Name: ELITEGROUP COMPUTER SYSTEMS CO., LTD Company Address: No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan

Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 EXTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01

Label Location

Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01

Compliance Certification Services Inc. Report No:KS110624A01 FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 RADIO FREQUENCY EXPOSURE LIMIT Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See §15.247(b)(4) and §1.1307(b)(1) of this chapter. EUT Specification EUT Bluetooth Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Others: Bluetooth: 2.402GHz ~ 2.480GHz Device category Portable (<20cm separation) Mobile (>20cm separation) Others __________________________ Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power 1.2dBm (1.318mW) Antenna gain (Max) 2.89dBi (Numeric gain: 1.945) Evaluation applied MPE Evaluation SAR Evaluation N/A Remark: 1. The maximum output power is 1.2dBm (1.318mW) at 2480MHz (with1.945numeric antenna gain.) 2. DTS device is not subject to routine RF evaluation; MPE estimate is used to justify the compliance. 3. For mobile or fixed location transmitters, no SAR consideration applied. The maximum power density is 1.0 mW/cm2 even if the calculation indicates that the power density would be larger. Compliance Certification Services Inc. Report No:KS110624A01 FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 TEST RESULTS No non-compliance noted. Calculation Given d GP E ×× = 30 & 3770 2 E S= Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 3770 30 d GP S ×× = Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields () () 2 2 0796.0 100/3770 1000/30 d GP d GP S × ×= × ×× = Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Maximum Permissible Exposure Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields GPS××=000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 EUT output power = 1.318mW Numeric Antenna gain = 1.945 Æ Power density = 0.00051 mW / cm 2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger.)

Compliance Certification Services Inc. ReportNo:KS110624A01-RP1 FCC ID:WL6-BR45IIX6230Date of Issue :July 12, 2011 Page 1 of 58 Rev. 00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. FCC 47 CFR PART 15 SUBPART C TEST REPORT For Product Name: Notebook Computer Brand Name: ECS,ELITEGROUP Model No.: BR45II1 Series Model: BR45IIX(X=0~9,A~Z OR BLANK) BR40IIX(X=0~9,A~Z OR BLANK) Test Report Number: KS110624A01-RP1 Issued for ELITEGROUP COMPUTER SYSTEMS CO.,LTD No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan Issued by Compliance Certification Services Inc. Kun shan Laboratory No.10 Weiye Rd., Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China TEL: 86-512-57355888 FAX: 86-512-57370818 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by A2LA or any government agencies. The test results in the report only apply to the tested sample. Compliance Certification Services Inc. ReportNo:KS110624A01-RP1 FCC ID:WL6-BR45IIX6230Date of Issue :July 12, 2011 Page 2 of 58 Rev. 00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION .............................................................................. 3 2 EUT DESCRIPTION................................................................................................... 4 3 TEST METHODOLOGY............................................................................................. 5 3.1. EUT CONFIGURATION................................................................................................ 5 3.2. EUT EXERCISE......................................................................................................... 5 3.3. GENERAL TEST PROCEDURES.................................................................................... 5 3.4. MODIFICATION.......................................................................................................... 5 3.5. FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS.................................. 6 3.6. DESCRIPTION OF TEST MODES................................................................................... 6 4 INSTRUMENT CALIBRATION .................................................................................. 7 4.1. FACILITIES............................................................................................................... 7 4.2. EQUIPMENT............................................................................................................. 7 4.3. LABORATORY ACCREDITATIONS AND LISTING............................................................... 7 4.4. TABLE OF ACCREDITATIONS AND LISTINGS.................................................................. 8 4.5. MEASURING INSTRUMENT CALIBRATION.................................................................. 8 5 SETUP OF EQUIPMENT UNDER TEST ................................................................. 10 5.1. SETUP CONFIGURATION OF EUT............................................................................... 10 5.2. SUPPORT EQUIPMENT ..................................................................................... 10 6 FCC PART 15.247 REQUIREMENTS ..................................................................... 10 6.1. PEAK POWER......................................................................................................... 10 6.2. BAND EDGES MEASUREMENT ........................................................................ 12 6.3. PEAK POWER SPECTRAL DENSITY............................................................................ 23 6.4. FREQUENCY SEPARATION .............................................................................. 24 6.5. NUMBER OF HOPPING FREQUENCY .............................................................. 29 6.6. TIME OF OCCUPANCY (DWELL TIME).............................................................. 32 6.7. SPURIOUS EMISSIONS ...................................................................................... 38 6.8. POWERLINE CONDUCTED EMISSIONS........................................................................ 55 Compliance Certification Services Inc. ReportNo:KS110624A01-RP1 FCC ID:WL6-BR45IIX6230Date of Issue :July 12, 2011 Page 3 of 58 Rev. 00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1 TEST RESULT CERTIFICATION Product Name: Notebook Computer Trade Name: ECS,ELITEGROUP Model Name.: BR45II1 Series Model: BR45IIX（X=0~9,A~Z OR BLANK） BR40IIX(X=0~9,A~Z OR BLANK) Applicant Discrepancy: Initial Device Category: MOBILE DEVICES Date of Test: July 5, 2011~ July 15, 2011 Applicant: ELITEGROUP COMPUTER SYSTEMS CO.,LTD No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan Manufacturer: Elitegroup Computer Systems (SIP) Co.,Ltd. Comprehensive Free Zone A Zone,No.200,Central SuHong Rd. SuZhou Industrial Park, JiangSu, P.R. China Application Type: Certification APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We here by certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4：2003 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in this report. Approved by: Reviewed by: Hadiif Hoo RF Manager Co…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 RADIATED EMISSIONS Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 conducted emissions Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :July 6, 2011 Report No .: KS110624A01 connected to the spectrum analyzer