WL6-BR95IIX6230Desktop Computer

i Preface  Copyright 2012 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Limitation of Liability While reasonable efforts have been made to ensure the accuracy of this manual, the manufacturer and distributor assume no liability resulting from errors or omissions in this manual, or from the use of the information contained herein. Conventions of This Manual Use this manual will help you get the most from your computer. If you are an experienced user of computers and/or Microsoft’s Windows operating systems, you might find it useful to read the Quick Start Guide that comes along with your accessories. If you are a less experienced user, you should go through the manual carefully before using your system. Whether or not you are an experienced user, you should consult the Troubleshooting Chapter if you encounter any problems with your computer. ii Safety Precautions This section is designed to assist you in identifying potentially unsafe conditions while working with this product. Required safety features have been installed in the computer to protect you from injury. However, you should use good judgment to identify potential safety hazards: Please read these safety instructions carefully. 1. Please keep this User's Manual for later reference. 2. Please disconnect this equipment from AC outlet before cleaning. Don't use liquid or sprayed detergent for cleaning. Use moisture sheet or cloth for cleaning. 3. For pluggable equipment, that the socket-outlet shall be installed near the equipment and shall be easily accessible. 4. Please keep this equipment from humidity. 5. Lay this equipment on a reliable surface when installed. A drop or fall could cause injury. 6. Make sure to use the right voltage for the power source when connecting the equipment to the power outlet. 7. Place the power cord in such a way that people can not step on it. Do not place anything on top of the power cord. 8. All cautions and warnings on the equipment should be noted. 9. If the equipment is not used for a long time, disconnect the equipment from the main power outlet to avoid being damaged by transient overvoltage. 10. Never pour any liquid into the opening, this could cause fire or electrical shock. 11. Never open the equipment. For safety reasons, the equipment should only be opened by a qualified service personnel. 12. If on the following situation arises, get the equipment checked by a service personnel: a. The Power cord or plug is damaged. b. Liquid has penetrated into the equipment. c. The equipment has been exposed to moisture. d. The equipment has not worked well or you cannot get it work according to the user's manual. e. The equipment has dropped and damaged. f. If the equipment has obvious signs of breakage. 13. Do not leave this equipment in an environment unconditioned, storage temperature above 60C (140f), it may damage the equipment. iii 14. The unit can be operated at an ambient temperature of max. 5C ~ 35C. 15. The sound pressure level of the operator's position according to IEC 704-1: 1982 is equal or less than 70 dB(A). 16. Power Cord Requirements The power cord set used with the AC adaptor must meet the requirements of the country where you use the AC adaptor, whether it is 100-240 Vac. The following information explains the requirements for power cord set selection.  The cor d set must be approved by the country in which it is used.  The appliance coupler must have a configuration for mating with a CEE7/EN60320/IEC 320/NEMA/ JIS C 8303 appliance inlet. A. For U.S. and Canada:  The cord set must be UL Listed and CSA Certified.  The minimum specifications for the flexible cord are No. 18 AWG, (2) Type SPT-2, and (3) 2-conductor. B. For Japan:  All components of the cord set must bear a “PSE” mark and in accordance with the Japanese Dentori Law.  The minimum specifications for the flexible cord are .75m㎡ conductors, (2) Type VCTR or VCTFK, and (3) 2-conductor.  The cord set must have minimum rated current capacity of 7 A.  The attachment plug must be a two-pole, grounded type with a Japanese Industrial Standard C8303 (15 A, 125 VAC) configuration. C. For Other Countries:  The cord set fittings must bear the certification mark of the agency responsible for evaluation in a specific country.  The flexible cord must be of a HAR (harmonized) type H03VVH2-F.  The cord set must have a current capacity of a least 2.5 Amperes and voltage rating of 125 or 250 Vac. iv Model: BR95IIX (X=0~9) IS designed to use with the following AC adapter model ONLY 65W ADP:  Delta type: ADP 19V65W DELTAADP-65JH AB S1 225RV LV5  Lite-On type: ADP 19V65W LITEONPA-1650-65 S1 225RV LV5 17. When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons. These precautions include the following:  Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.  Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.  Do not use the telephone to report a gas leak in the vicinity of the leak.  Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 Elitegroup Computer Systems Co.,Ltd. 2012-2-2 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Elitegroup Computer Systems Co.,Ltd. hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): (Product description: desktop computer model name: BR95II1，BR95IIX（X=0~9,A~Z OR BLANK） FCC ID: ）WL6-BR95IIX6230 We affirm that between SIEMIC and _ Elitegroup Computer Systems Co.,Ltd., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Signature FCC grantee contact person information Name/Title: Welan Chen/Section Manager Company Name: Elitegroup Computer Systems Co.,Ltd. Address: No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan TEL: 886-2-2299-5668 FAX: 886-2-2299-1694 Email:[email protected]

Elitegroup Computer Systems Co.,Ltd. Date:2012-2-2 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: WL6-BR95IIX6230 To Whom It May Concern: This letter is to ascertain that Elitegroup Computer Systems Co.,Ltd. . Product Desktop Computer has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Signature Signature FCC grantee contact person information Name/Title: Welan Chen/Section Manager Company Name: Elitegroup Computer Systems Co.,Ltd. Address: No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan TEL: 886-2-2299-5668 FAX: 886-2-2299-1694 Email:[email protected]

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 1.0 2.0 August – 11 - 2008 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 2.0 Elitegroup Computer Systems Co.,Ltd. 2012-2-2 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: WL6-BR95IIX6230 We hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature FCC grantee contact person information Name/Title: Welan Chen/Section Manager Company Name: Elitegroup Computer Systems Co.,Ltd. Address: No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan TEL: 886-2-2299-5668 FAX: 886-2-2299-1694 Email:[email protected]

Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :January 11,2012 Report No .: KS120105A01 EXTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :January 11,2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :January 11,2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :January 11,2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :January 11,2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :January 11,2012 Report No .: KS120105A01

BR95II1-RatingLable location

Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 WIFI /BT Antenna 0 WIFI Antenna 1 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01 Compliance Certification Services Inc. FCC ID: WL6-BR45IIX6230 Date of Issue :Jan 11, 2012 Report No .: KS120105A01

Compliance Certification Services Inc. Report No: KS120105A01 FCC ID: WL6-BR95IIX6230 Date of Issue :Jan 10,2012 RADIO FREQUENCY EXPOSURE LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. EUT Specification EUT 802.11a/b/g/n access point Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power IEEE 802.11b mode: 16.22dBm (41.88mW) IEEE 802.11g mode: 14.54dBm (28.44mW) draft 802.11gn Standard-20 MHz Channel mode: 18.07 dBm (64.12mW) draft 802.11gn Wide-40 MHz Channel mode: 16.85 dBm (48.42mW) IEEE 802.11a mode: 14.82dBm (30.34 mW) draft 802.11an Standard-20 MHz Channel mode:17.28 dBm(53.46mW) draft 802.11an Wide-40 MHz Channel mode: 16.54 dBm (45.08mW) Antenna gain (Max) Two PIFA antennas for 2.4GHz Gain 2.34 dBi and 2.89 dBi /Total gain 5.63 dBi and two PIFA antennas for 5 GHz Gain 1.63 dBi and -0.78dBi /Total gain 3.60 dBi Evaluation applied MPE Evaluation* SAR Evaluation N/A Remark: 1. The maximum output power is 18.07dBm (64.12mW) at 2462MHz (with 3.66numeric antenna gain.); 17.82dBm (53.46mW) at 5745MHz (with 2.29numeric antenna gain.) 2. DTS device is not subject to routine RF evaluation; MPE estimate is used to justify the compliance. 3. For mobile or fixed location transmitters, no SAR consideration applied. The maximum power density is 1.0 mW/cm2 even if the calculation indicates that the power density would be larger. 4. Total gain (dBm) = 10*LOG(10^(Chain 0 gain / 10)+10^(Chain 1 gain /10)) Compliance Certification Services Inc. Report No: KS120105A01 FCC ID: WL6-BR95IIX6230 Date of Issue :Jan 10,2012 TEST RESULTS No non-compliance noted. Calculation Given d GP E ×× = 30 & 3770 2 E S= Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 3770 30 d GP S ×× = Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields () () 2 2 0796.0 100/3770 1000/30 d GP d GP S × ×= × ×× = Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Maximum Permissible Exposure Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields GPS××=000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 1)IEEE 802.11b: EUT output power = 41.88mW Numeric Antenna gain = 1.95 Æ Power density = 0.0163 mW / cm 2 Compliance Certification Services Inc. Report No: KS120105A01 FCC ID: WL6-BR95IIX6230 Date of Issue :Jan 10,2012 IEEE 802.11g: EUT output power = 28.44mW Numeric Antenna gain = 1.95 Æ Power density = 0.0110 mW / cm 2 draft 802.11gn Standard-20 MHz Channel mode EUT output power = 64.12mW Numeric Antenna gain = 3.66 Æ Power density = 0.0467 mW / cm 2 draft 802.11gn Wide-40 MHz Channel mode EUT output power = 48.42mW Numeric Antenna gain = 3.66 Æ Power density = 0.0352 mW / cm 2 IEEE 802.11a: EUT output power = 30.33mW Numeric Antenna gain = 1.46 Æ Power density = 0.0088 mW / cm 2 draft 802.11an Standard-20 MHz Channel mode EUT output power =53.46mW Numeric Antenna gain = 2.29 Æ Power density = 0.0244 mW / cm 2 draft 802.11an Wide-40 MHz Channel mode EUT output power = 45.08mW Numeric Antenna gain = 2.29 Æ Power density = 0.0205 mW / cm 2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger.) Compliance Certification Services Inc. Report No: KS120105A01 FCC ID: WL6-BR95IIX6230 Date of Issue :Jan 10,2012 2)Bluetooth + WIFI Bluetooth highest MPE: EUT output power = 1.318mW Numeric Antenna gain = 1.945 Æ Power density = 0.00051 mW / cm2 WIFI highest MPE: draft 802.11gn Standard-20 MHz Channel mode EUT output power = 64.12mW Numeric Antenna gain = 3.66 Æ Power density = 0.0467 mW / cm 2 Total : Æ Power density = 0.04721 mW / cm 2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger.)

Compliance Certification Services Inc. Report No: KS120105A01-RPB FCC ID: WL6-BR95IIX6230 Date of Issue :January 10, 2012 Page 1 of 140 Rev. 00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. FCC 47 CFR PART 15 SUBPART C TEST REPORT For Product Name: Desktop Computer Brand Name: ECS,ELITEGROUP Model No.: BR95II1 Series Model: BR95IIX（X=0~9,A~Z OR BLANK） Test Report Number: KS120105A01-RPB Issued for Elitegroup Computer Systems Co.,Ltd. No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan Issued by Compliance Certification Services Inc. Kun shan Laboratory No.10 Weiye Rd., Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China TEL: 86-512-57355888 FAX: 86-512-57370818 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by A2LA or any government agencies. The test results in the report only apply to the tested sample. Compliance Certification Services Inc. Report No: KS120105A01-RPB FCC ID: WL6-BR95IIX6230 Date of Issue :January 10, 2012 Page 2 of 140 Rev. 00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION............................................................................ 3 2. EUT DESCRIPTION.................................................................................................... 4 3. TEST METHODOLOGY ............................................................................................ 5 3.1. EUT CONFIGURATION........................................................................................................... 5 3.2. EUT EXERCISE...................................................................................................................... 5 3.3. GENERAL TEST PROCEDURES.............................................................................................. 5 3.4. FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS...................................... 6 3.5. DESCRIPTION OF TEST MODES............................................................................................. 7 4. INSTRUMENT CALIBRATION ................................................................................ 8 4.1. MEASURING INSTRUMENT CALIBRATION......................................................................... 8 5. FACILITIES AND ACCREDITATIONS ................................................................ 10 5.1. FACILITIES.......................................................................................................................... 10 5.2. EQUIPMENT........................................................................................................................ 10 5.3. LABORATORY ACCREDITATIONS AND LISTING.................................................................... 10 5.4. TABLE OF ACCREDITATIONS AND LISTINGS........................................................................ 11 6. SETUP OF EQUIPMENT UNDER TEST ............................................................... 12 6.1. SETUP CONFIGURATION OF EUT......................................................................................... 12 6.2. SUPPORT EQUIPMENT............................................................................................... 12 7. FCC PART 15.247 REQUIREMENTS..................................................................... 13 7.1. 6DB BANDWIDTH................................................................................................................ 13 7.2. PEAK POWER...................................................................................................................... 16 7.3. AVERAGE POWER.............................................................................................................. 16 7.4. PEAK POWER SPECTRAL DENSITY...................................................................................... 16 7.5. SPURIOUS EMISSIONS................................................................................................. 16 7.6. RADIATED EMISSIONS................................................................................................ 16 7.7. POWERLINE CONDUCTED EMISSIONS................................................................................. 16 Compliance Certification Services Inc. Report No: KS120105A01-RPB FCC ID: WL6-BR95IIX6230 Date of Issue :January 10, 2012 Page 3 of 140 Rev. 00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1. TEST RESULT CERTIFICATION Product Name: Desktop Computer Trade Name: ECS,ELITEGROUP Model Name.: BR95II1 Series Model: BR95IIX（X=0~9,A~Z OR BLANK） Applicant Discrepancy: Initial Device Category: MOBILE DEVICES Date of Test: January 9, 2012 Applicant: Elitegroup Computer Systems Co.,Ltd. No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan Manufacturer: Elitegroup Computer Systems (SIP) Co.,Ltd. Comprehensive Free Zone A Zone,No.200,Central SuHong Rd. SuZhou Industrial Park, JiangSu, P.R. China Application Type: Certification APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2003 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in th…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. FCC ID: WL6-BR95IIX6230 Date of Issue : Jan11,2012 Report No .: KS120105A01 RADIATED EMISSIONS Compliance Certification Services Inc. FCC ID: WL6-BR95IIX6230 Date of Issue : Jan11,2012 Report No .: KS120105A01 conducted emissions Compliance Certification Services Inc. FCC ID: WL6-BR95IIX6230 Date of Issue : Jan11,2012 Report No .: KS120105A01 connected to the spectrum analyzer