WL6-TRBC1CD1Wireless Motherboard

TR10CD1 Motherboard Guide 1 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/ TV technician for help.  Operations in the 5.15-5.25GHz band are restricted to indoor usage only. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 2 undesired operation. 3 RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: WL6-TRBC1CD1” Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. This radio transmitter FCC ID: WL6-TRBC1CD1 has been approved by FCC to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna List 4 No. Manufacturer Part No. Antenna Type Peak Gain 1 Pulse 02H475-00 6500 Ceramic Chip Antenna 3.2 dBi for 2.4GHz 4.2 dBi for 5 GHz Note: The antenna connector is I-PEX type. 5 Motherboard layout Main components No. Name No. Name A CPU+PMIC+DDR+EMMC E NFC B Audio Codec F TPM C Microphone G Microphone D Rear facing camera 6 System connectors No. Name No. Name 1 Power key Connector 5 LCD Connector 2 Front Camera 6 Touch panel Connector 3 Battery Connector 7 Speaker Connectors 4 Volume key Connector 8 SIM Card Connector 7 I/O Ports No. Name No. Name 1 Micro USB port 4 Headphone plug 2 Mini HDMI port 5 DC-in jack 3 Micro SD card slot 8 Features Processor  Intel Cloverview +  Dual core  L2 cache up to 512KB Memory  8bit, LP DDR2 Mobile RAM PoP  1GB Storage  Single eMMC v4.512  Default 16 GB Wireless  Wi-Fi 802.11 a/b/g/n  Bluetooth 3.0  NFC support Display  LVDS interface  Resolution: 1280(H) × 3 (RGB) × 800(V) pixels  Support multi-touch feature Cameras Control  Two MIPI CSI-2 interfaces for external image sensors.  Enhanced color interpolation  12-bit color resolution  Video image stabilization support  Flash light control  Rear camera: 5.0 M 9 Input/Output  1 x micro-USB 2.0, OTG port (Type A/B)  1 x Mic/head phone jack combo  1 x mini-HDMI (Type D)  1 x micro-SD card slot  1 x DC-in jack  Micro SIM card support Speaker & Mic  Build-in Speaker x 2  Internal Digital MIC x 1

FCC ID: WL6-TRBC1CD1 Report No.: RF131126D16A Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch February 7, 2014 Dear Application Examiner, Elitegroup Computer Systems Co., Ltd, It’s a Wireless Motherboard, FCC ID: WL6-TRBC1CD1 would like to have your authorization as a modular approval for mobile and portable usage. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip SDIN7DP2. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is SNB5072-C0. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Rex Lai / Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Page 3 Page 4 Page 5 Page 6 Page 7

Report No.: SA131126D16A 1 of 6 Report Format Version 5.0.0 Reference No.: 131218D02 RF EXPOSURE REPORT REPORT NO.: SA131126D16A MODEL NO.: TR10Cxy FCC ID: WL6-TRBC1CD1 RECEIVED: Dec. 18, 2013 TESTED: Dec. 19, 2013 ~ Jan. 16, 2014 ISSUED: Jan. 17, 2014 APPLICANT: Elitegroup Computer Systems Co., Ltd ADDRESS: No. 239, Ti Ding Blvd., Sec. 2, Taipei, Taiwan 11493 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA131126D16A 2 of 6 Report Format Version 5.0.0 Reference No.: 131218D02 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION ........................................................................................... 4 2. RF EXPOSURE LIMIT .................................................................................. 5 3. MPE CALCULATION FORMULA .................................................................. 5 4. CLASSIFICATION ......................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ............... 6 Report No.: SA131126D16A 3 of 6 Report Format Version 5.0.0 Reference No.: 131218D02 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA131126D16A Original release Jan. 17, 2014 Report No.: SA131126D16A 4 of 6 Report Format Version 5.0.0 Reference No.: 131218D02 1. CERTIFICATION PRODUCT: Wireless Motherboard BRAND NAME: ECS ELITEGROUP MODEL NO.: TR10Cxy (x=0~9, A~Z or blank or "-";y=0~9, A~Z or blank or "-") APPLICANT: Elitegroup Computer Systems Co., Ltd TESTED: Dec. 19, 2013 ~ Jan. 16, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has (model no.: TR10CD1) been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Jan. 17, 2014 ( Annie Chang / Supervisor ) APPROVED BY : , DATE:Jan. 17, 2014 ( Rex Lai / Assistant Manager ) Report No.: SA131126D16A 5 of 6 Report Format Version 5.0.0 Reference No.: 131218D02 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA131126D16A 6 of 6 Report Format Version 5.0.0 Reference No.: 131218D02 5.CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 ~ 2462 19.99 4.20 20 0.0522 1.00 5180 ~ 5320 9.67 4.20 20 0.0048 1.00 5745 ~ 5825 22.33 4.20 20 0.0895 1.00 2402 ~ 2480 4.31 3.37 20 0.0012 1.00 CO NCULSION: Both of the modules can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. WLAN (2.4 G) + BLUETOOTH =0.0522/1 + 0.0012/1 = 0.0534 2. WLAN (5.0 G) + BLUETOOTH = 0.0895/1 + 0.0012/1 = 0.0907 Therefore, the maximum calculation of this situation is 0.1441, which is less than the “1” limit. --- END ---

Report No.: RF131126D16-2 1 of 22 Report Format Version 5.0.0 Reference No.: 131218D02 DFS TEST REPORT REPORT NO.: RF131126D16-2 MODEL NO.: TR10Cxy FCC ID: WL6-TRBC1CD1 RECEIVED: Dec. 18, 2013 TESTED: Jan. 8, 2014 ISSUED: Jan. 17, 2014 APPLICANT: Elitegroup Computer Systems Co., Ltd ADDRESS: No. 239, Ti Ding Blvd., Sec. 2, Taipei, Taiwan 11493 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131126D16-2 2 of 22 Report Format Version 5.0.0 Reference No.: 131218D02 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................ 3 1 CERTIFICATION ...................................................................................... 4 2 EUT INFORMATION ................................................................................ 5 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT ..................... 5 2.2 EUT SOFTWARE AND FIRMWARE VERSION ....................................... 5 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT .................... 5 2.4 EUT MAXIMUM AND MINIMUM CONDUCTED POWER ........................ 6 2.5 EUT MAXIMUM AND MINIMUM E.I.R.P. POWER ................................... 7 2.6 TRANSMIT POWER CONTROL (TPC) ................................................... 8 2.7 STATEMENT OF MAUNFACTURER ....................................................... 8 3 U-NII DFS RULE REQUIREMENTS ........................................................ 9 3.1 WORKING MODES AND REQUIRED TEST ITEMS ............................... 9 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS ............................ 10 4 TEST & SUPPORT EQUIPMENT LIST ................................................. 12 4.1 TEST INSTRUMENTS ........................................................................... 12 4.2 DESCRIPTION OF SUPPORT UNITS .................................................. 12 5 TEST PROCEDURE .............................................................................. 13 5.1 ADT DFS MEASUREMENT SYSTEM: .................................................. 13 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL: ............... 14 5.3 DEVIATION FROM TEST STANDARD .................................................. 14 5.4 RADIATED TEST SETUP CONFIGURATION ....................................... 15 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE .................................. 15 6 TEST RESULTS .................................................................................... 16 6.1 SUMMARY OF TEST RESULTS ........................................................... 16 6.2 TEST RESULTS .................................................................................... 17 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE. .............................................................................. 17 6.2.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME . 18 6.2.3 NON- OCCUPANCY PERIOD ............................................................... 19 6.2.4 NON-ASSOCIATED TEST ..................................................................... 21 6.2.5 NON- CO-CHANNEL TEST ................................................................... 21 7 INFORMATION ON THE TESTING LABORATORIES ........................... 22 Report No.: RF131126D16-2 3 of 22 Report Format Version 5.0.0 Reference No.: 131218D02 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF131126D16-2 Original release Jan. 17, 2014 Report No.: RF131126D16-2 4 of 22 Report Format Version 5.0.0 Reference No.: 131218D02 1 CERTIFICATION PRODUCT: Wireless Motherboard MODEL: TR10Cxy (x=0~9, A~Z or blank or "-";y=0~9, A~Z or blank or "-") BRAND: ECS ELITEGROUP APPLICANT: Elitegroup Computer Systems Co., Ltd TEST SAMPLE: ENGINEERING SAMPLE TESTED: Jan. 8, 2014 STANDARDS: FCC Part 15, Subpart E (Section 15.407) FCC 06-96 The above equipment (Model: TR10CD1) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Jan. 17, 2014 ( Annie Chang / Supervisor ) APPROVED BY : , DATE:Jan. 17, 2014 ( …

Text truncated - open the document above for the full version.

Report No.: RF131126D16A-1 1 of 52 Report Format Version 5.2.0 Reference No.: 131218D02 FCC TEST REPORT (WLAN 15.407) REPORT NO.: RF131126D16A-1 MODEL NO.: TR10Cxy FCC ID: WL6-TRBC1CD1 RECEIVED: Dec. 18, 2013 TESTED: Dec. 19, 2013 ~ Jan. 16, 2014 ISSUED: Jan. 17, 2014 APPLICANT: Elitegroup Computer Systems Co., Ltd ADDRESS: No. 239, Ti Ding Blvd., Sec. 2, Taipei, Taiwan 11493 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF131126D16A-1 2 of 52 Report Format Version 5.2.0 Reference No.: 131218D02 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................. 4 1. CERTIFICATION ............................................................................................... 5 2. SUMMARY OF TEST RESULTS ....................................................................... 6 2.1 MEASUREMENT UNCERTAINTY .................................................................... 6 3. GENERAL INFORMATION ............................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................... 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................. 10 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................... 12 3.4 DESCRIPTION OF SUPPORT UNITS ............................................................ 14 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 14 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................. 14 4. TEST TYPES AND RESULTS ......................................................................... 16 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................... 16 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ....... 16 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ... 16 4.1.3 TEST INSTRUMENTS .................................................................................... 17 4.1.4 TEST PROCEDURES ..................................................................................... 18 4.1.5 DEVIATION FROM TEST STANDARD ........................................................... 18 4.1.6 TEST SETUP .................................................................................................. 19 4.1.7 EUT OPERATING CONDITION ...................................................................... 19 4.1.8 TEST RESULTS .............................................................................................. 20 4.2 CONDUCTED EMISSION MEASUREMENT .................................................. 33 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................... 33 4.2.2 TEST INSTRUMENTS .................................................................................... 33 4.2.3 TEST PROCEDURES ..................................................................................... 34 4.2.4 DEVIATION FROM TEST STANDARD ........................................................... 34 4.2.5 TEST SETUP .................................................................................................. 35 4.2.6 EUT OPERATING CONDITIONS .................................................................... 35 4.2.7 TEST RESULTS .............................................................................................. 36 4.3 PEAK TRANSMIT POWER MEASUREMENT ................................................ 38 4.3.1 LIMITS OF PEAK TRANSMIT POWER MEASUREMENT ............................. 38 4.3.2 TEST SETUP .................................................................................................. 38 4.3.3 TEST INSTRUMENTS .................................................................................... 38 4.3.4 TEST PROCEDURE ....................................................................................... 39 4.3.5 DEVIATION FROM TEST STANDARD ........................................................... 39 4.3.6 EUT OPERATING CONDITIONS .................................................................... 39 4.3.7 TEST RESULTS .............................................................................................. 40 4.4 PEAK POWER SPECTRAL DENSITY MEASUREMENT ............................... 43 4.4.1 LIMITS OF PEAK POWER SPECTRAL DENSITY MEASUREMENT…

Text truncated - open the document above for the full version.

1 of 5 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 of 5 RADIATED EMISSION TEST 3 of 5 RADIATED EMISSION TEST 4 of 5 RADIATED EMISSION TEST 5 of 5 DFS TEST Master UUT Receiver Antenna to S.A.