WT7PTRNKTBSR75410BSR75 409-430 MHz BASE STATION RADIO

BSR75 USER AND INSTALLATION MANUAL 01.01.00/1 Rev.1 PRODUCT: BSR75 CODE: D198X61_DDS06 VERSION: 01 REVISION: 01 DATE: 05/08/10 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 17 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 15/07/09 Javier Córdova First edition. 1.1 05/08/10 A. Narvaiza Changes in frequency bands: 409-430 MHz DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: D198X61_DDS06 BSR75 USER AND INSTALLATION MANUAL Date: 15/07/09 Page: 2 of 16 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: D198X61_DDS06 BSR75 USER AND INSTALLATION MANUAL Date: 15/07/09 Page: 3 of 16 01.01.00/1 Rev.1 CONTENTS: 1. INTRODUCTION.......................................................................................................... 4 2. UNPACKING AND CHECKING................................................................................... 5 3. PREVIOUS CONSIDERATIONS.................................................................................. 5 4. INFORMATION ON SAFETY AND ELECTROMAGNETIC COMPATIBILITY............ 5 5. EQUIPMENT DESCRIPTION....................................................................................... 7 5.1. FRONT VIEW......................................................................................................... 7 5.2. REAR VIEW........................................................................................................... 8 5.3. MODULES............................................................................................................. 9 6. INSTALLATION GUIDE............................................................................................. 12 6.1. LOCATION........................................................................................................... 12 6.2. POWER SUPPLY CONNECTION....................................................................... 12 6.3. ANTENNA CONNECTION................................................................................... 13 6.4. SWITCHING ON THE BSR75.............................................................................. 13 7. CONFIGURATION...................................................................................................... 14 8. INCIDENTS................................................................................................................. 14 8.1. ALARMS.............................................................................................................. 14 Code: D198X61_DDS06 BSR75 USER AND INSTALLATION MANUAL Date: 15/07/09 Page: 4 of 16 01.01.00/1 Rev.1 INTRODUCTION 1. The BSR75 is a digital RF transceiver with a transmitter output power of 75 W. It is manufactured following a robust mechanical modular design which allows simple and economic maintenance. The BSR75 is available in the following frequency bands: ‰ 380 - 400 MHz ‰ 409 - 430 MHz ‰ 450 - 470 MHz ‰ 806 - 870 MHz The modules that form the BSR75 are: ‰ RPS75 (Repeater Power Supply) ‰ RPA75 (Repeater Power Amplifier) ‰ RTX75 (Repeater Transmitter) ‰ RRX (Repeater Receiver) ‰ BSYNC (BSR75 Synchronism) - OPTIONAL ‰ RCPU (Repeater Control Processing Unit) The proper operation of any electronic device depends on its correct use. It is therefore recommended to follow the instructions in this manual. ! CAUTION: Switch the BSR75 off before inserting/removing any of its modules. Code: D198X61_DDS06 BSR75 USER AND INSTALLATION MANUAL Date: 15/07/09 Page: 5 of 16 01.01.00/1 Rev.1 2. UNPACKING AND CHECKING The following elements are supplied in the box: BSR75 50Ω / 20W load termination Power Supply Cable Maintenance Cable Two Ethernet Cables The equipment is supplied with all the modules already assembled in the rack. The modules in the basic configuration are: Power Supply module (RPS), Power Amplifier (RPA75), Transmitter (RTX75), Re…

Text truncated - open the document above for the full version.

TELTRONIC S.A.U. CIF/NIF: A-50035518 Polígono Malpica, C/ F Oeste 50057 Zaragoza (Spain) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: WT7 PTRNKTBSR75400 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block diagrams BSR75_BLOCK_DIAGRAMS.pdf Schematics Schematic RPA F067013_8.pdf Schematic2 RPA F067003_3.pdf Schematic RCPU F067024_3.2.pdf Schematic BACKPLANE F067348_5.1.pdf Schematic RTX FF067016_3.pdf Schematic SYNC F067156_2.3.pdf Schematic RRX F067019_5.pdf Schematic RPA F067340_2.pdf Schematic RPS F067022_5_RPS75.pdf Schematic OUT RPA F067345_2.pdf Part lists Part List E138711_8.2.pdf Part List E138021_3.2.pdf Part List E485010_3.pdf Part List E138055_5.pdf Part List E138718_3.19.pdf Part List E138051_2.3.pdf Part List E138740_6.1.pdf Part List E138712_2.pdf Part List E138050_5.4.pdf Part List E138713_2.pdf Circuit Description BSR75_CIRCUITS_DESCRIPTION.pdf Tune Up procedure BSR75_Test_ Operation_ Manual.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name User and Installation Manual BSR75_User_Instalation_Manual.pdf Internal&External Photos (dossiers) Dossier Backplane DOSSIER_BACKPLANE_ BSR75 Dossier BSR DOSSIER_BSR75 Dossier RCPU DOSSIER_RCPU_BSR75 Dossier RPA DOSSIER_RPA75_BSR75 Dossier RPS DOSSIER_RPS75_ BSR75 Dossier RRX DOSSIER_RRX_BSR75 Dossier BSYNC DOSSIER_BSYNC_ BSR75 Dossier RTX DOSSIER_RTX75_ BSR75 Sincerely, José Román Gimeno Certification & Services Area Manager

DOSSIER BSR75 01.01.00/1 Rev.1 PRODUCT: BSR75 CODE: VERSION: 01 REVISION: 00 DATE: 21/09/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 6 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 21/09/09 A. Narvaiza Pictures of BSR75 DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER BSR75 Date: 15/07/09 Page: 2 of 6 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: DOSSIER BSR75 Date: 15/07/09 Page: 3 of 6 01.01.00/1 Rev.1 CONTENTS: 1. BSR75 ..........................................................................................................................4 1.1. INTRODUCTION .................................................................................................... 4 1.2. FRONT PICTURE .................................................................................................. 5 1.3. REAR PICTURE .................................................................................................... 5 1.4. GENERAL PICTURES........................................................................................... 6 Code: DOSSIER BSR75 Date: 15/07/09 Page: 4 of 6 01.01.00/1 Rev.1 1. BSR75 1.1. INTRODUCTION The following pictures are: ƒ Front picture ƒ Rear picture ƒ General picture Code: DOSSIER BSR75 Page: 5 of 6 Date: 15/07/09 01.01.00/1 Rev.1 1.2. FRONT PICTURE 1.3. REAR PICTURE Code: DOSSIER BSR75 Page: 6 of 6 Date: 15/07/09 01.01.00/1 Rev.1 1.4. GENERAL PICTURES

BSR75 IDENTIFICATION LABEL 01.01.00/1 Rev.1 PRODUCT: BSR75 CODE: VERSION: 01 REVISION: 01 DATE: 6/10/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 5 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 21/09/09 A. Narvaiza Identification Label of BSR75 1.1 6/10/09 José Román Changes in FCC and Identification labels DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: BSR75 IDENTIFICATION LABEL Date: 6/10/09 Page: 2 of 5 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: BSR75 IDENTIFICATION LABEL Date: 6/10/09 Page: 3 of 5 01.01.00/1 Rev.1 CONTENTS: 1. BSR75 ..........................................................................................................................4 1.1. INTRODUCTION .................................................................................................... 4 1.2. LABEL ................................................................................................................... 4 1.3. LABEL LOCATION: .............................................................................................. 5 Code: BSR75 IDENTIFICATION LABEL Page: 4 of 5 Date: 6/10/09 01.01.00/1 Rev.1 BSR75 1. 1.1. INTRODUCTION The identification Label is situated in the rear of the BSR75. The label is a silver paper polyester film laminate. 1.2. LABEL Label Colors: Silver and Black. Label 1 Label 2 Label 3 79 mm 10 mm Restricted to occupational use to safety FCC RF energy exposure limits. See user manual for awareness and control info. Notice! Code: BSR75 IDENTIFICATION LABEL Page: 5 of 5 Date: 6/10/09 01.01.00/1 Rev.1 1.3. LABEL LOCATION: LABEL 2 LABEL 1 LABEL 3 Label Location LABEL 1 LABEL 2 LABEL3

DOSSIER RCPU BSR75 01.01.00/1 Rev.1 PRODUCT: RCPU CODE: VERSION: 01 REVISION: 00 DATE: 15/07/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 6 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 15/07/09 A. Narvaiza Pictures of RCPU DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER RCPU BSR75 Date: 15/07/09 Page: 2 of 6 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: DOSSIER RCPU BSR75 Date: 15/07/09 Page: 3 of 6 01.01.00/1 Rev.1 CONTENTS: 1. RCPU.................................................................................................................................. 4 1.1. FRONT PICTURE .................................................................................................. 4 1.2. RCPU PCB TOP LAYER PICTURE ...................................................................... 5 1.3. RCPU PCB BOTTOM LAYER PICTURE .............................................................. 6 Code: DOSSIER RCPU BSR75 Page: 4 of 6 Date: 15/07/09 01.01.00/1 Rev.1 1. RCPU 1.1. FRONT PICTURE Code: DOSSIER RCPU BSR75 Page: 5 of 6 Date: 15/07/09 01.01.00/1 Rev.1 RCPU PCB TOP LAYER PICTURE 1.2. Code: DOSSIER RCPU BSR75 Page: 6 of 6 Date: 15/07/09 01.01.00/1 Rev.1 RCPU PCB BOTTOM LAYER PICTURE 1.3.

DOSSIER BACKPLANE BSR75 01.01.00/1 Rev.1 PRODUCT: BACKPLANE BSR75 CODE: VERSION: 01 REVISION: 00 DATE: 04/08/10 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 4 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 04/08/10 A. Narvaiza Pictures of BACKPLANE BSR75 DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER BACKPLANE BSR75 Date: 08/09/10 Page: 2 of 4 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: DOSSIER BACKPLANE BSR75 Date: 08/09/10 Page: 3 of 4 01.01.00/1 Rev.1 CONTENTS: 1. BACKPLANE BSR75.................................................................................................. 4 1.1. BACKPLANE PCB TOP LAYER PICTURE .......................................................... 4 1.2. BACKPLANE PCB BOTTOM LAYER PICTURE.................................................. 4 Code: DOSSIER BACKPLANE BSR75 Date: 08/09/10 Page: 4 of 4 01.01.00/1 Rev.1 BACKPLANE BSR75 1. 1.1. BACKPLANE PCB TOP LAYER PICTURE 1.2. BACKPLANE PCB BOTTOM LAYER PICTURE

DOSSIER BSYNC BSR75 01.01.00/1 Rev.1 PRODUCT: BSYNC CODE: VERSION: 01 REVISION: 00 DATE: 15/07/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 5 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 15/07/09 A. Narvaiza Pictures of BSYNC DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER BSYNC BSR75 Date: 15/07/09 Page: 2 of 5 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: DOSSIER BSYNC BSR75 Date: 15/07/09 Page: 3 of 5 01.01.00/1 Rev.1 CONTENTS: 1. BSYNC......................................................................................................................... 4 1.1. FRONT PICTURE.................................................................................................. 4 1.2. BSYNC PCB TOP LAYER PICTURE.................................................................... 5 1.3. BSYNC PCB BOTTOM LAYER PICTURE............................................................ 5 Code: DOSSIER BSYNC BSR75 Date: 15/07/09 Page: 4 of 5 01.01.00/1 Rev.1 BSYNC 1. 1.1. FRONT PICTURE Code: DOSSIER BSYNC BSR75 Date: 15/07/09 Page: 5 of 5 01.01.00/1 Rev.1 1.2. BSYNC PCB TOP LAYER PICTURE Crystal Oscillator Package 1.3. BSYNC PCB BOTTOM LAYER PICTURE

DOSSIER RPS75 BSR75 01.01.00/1 Rev.1 PRODUCT: RPS75 CODE: VERSION: 01 REVISION: 00 DATE: 04/08/10 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 5 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 04/08/10 A. Narvaiza Pictures of RPS75 DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER RPS75 BSR75 Date: 04/08/10 Page: 2 of 5 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: DOSSIER RPS75 BSR75 Date: 04/08/10 Page: 3 of 5 01.01.00/1 Rev.1 CONTENTS: 1.1. FRONT PICTURE .................................................................................................. 4 1.2. RPS PCB TOP LAYER PICTURE ......................................................................... 5 1.3. RPS PCB BOTTOM LAYER PICTURE ................................................................. 5 Code: DOSSIER RPS75 BSR75 Date: 04/08/10 Page: 4 of 5 01.01.00/1 Rev.1 1.1. RPS FRONT PICTURE Code: DOSSIER RPS75 BSR75 Date: 04/08/10 Page: 5 of 5 01.01.00/1 Rev.1 1.2. RPS PCB TOP LAYER PICTURE 1.3. RPS PCB BOTTOM LAYER PICTURE

DOSSIER RRX BSR75 01.01.00/1 Rev.1 PRODUCT: RRX CODE: VERSION: 01 REVISION: 00 DATE: 04/08/10 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 6 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 04/08/10 A. Narvaiza Pictures of RRX DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER RRX BSR75 Date: 04/09/10 Page: 2 of 6 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes t…

Text truncated - open the document above for the full version.