WT7PTRNKTBSR75450BSR75 BASE STATION RADIO/REPEATER

BSR75 USER AND INSTALLATION MANUAL 01.01.00/1 Rev.1 PRODUCT: BSR75 CODE: D198N61_DDS06 VERSION: 01 REVISION: 00 DATE: 15/07/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 17 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 15/07/09 Javier Córdova First edition. DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director BSR75 USER AND INSTALLATION MANUAL Code: D198N61_DDS06 Date: 15/07/09 Page: 2 of 16 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. BSR75 USER AND INSTALLATION MANUAL Code: D198N61_DDS06 Date: 15/07/09 Page: 3 of 16 01.01.00/1 Rev.1 CONTENTS: 1. INTRODUCTION ......................................................................................................... 4 2. UNPACKING AND CHECKING .................................................................................. 5 3. PREVIOUS CONSIDERATIONS................................................................................. 5 4. INFORMATION ON SAFETY AND ELECTROMAGNETIC COMPATIBILITY ............ 5 5. EQUIPMENT DESCRIPTION ...................................................................................... 7 5.1. FRONT VIEW ....................................................................................................... 7 5.2. REAR VIEW ......................................................................................................... 8 5.3. MODULES ............................................................................................................ 9 6. INSTALLATION GUIDE ............................................................................................ 12 6.1. LOCATION ......................................................................................................... 12 6.2. POWER SUPPLY CONNECTION ...................................................................... 12 6.3. ANTENNA CONNECTION ................................................................................. 13 6.4. SWITCHING ON THE BSR75 ............................................................................ 13 7. CONFIGURATION .................................................................................................... 14 8. INCIDENTS ............................................................................................................... 14 8.1. ALARMS ............................................................................................................ 14 BSR75 USER AND INSTALLATION MANUAL Code: D198N61_DDS06 Date: 15/07/09 Page: 4 of 16 01.01.00/1 Rev.1 1. INTRODUCTION The BSR75 is a digital RF transceiver with a transmitter output power of 75 W. It is manufactured following a robust mechanical modular design which allows simple and economic maintenance. The BSR75 is available in the following frequency bands:
380 - 400 MHz
410 - 430 MHz
450 - 470 MHz
806 - 870 MHz The modules that form the BSR75 are:
RPS75 (Repeater Power Supply)
RPA75 (Repeater Power Amplifier)
RTX75 (Repeater Transmitter)
RRX (Repeater Receiver)
BSYNC (BSR75 Synchronism) - OPTIONAL
RCPU (Repeater Control Processing Unit) The proper operation of any electronic device depends on its correct use. It is therefore recommended to follow the instructions in this manual. ! CAUTION: Switch the BSR75 off before inserting/removing any of its modules. BSR75 USER AND INSTALLATION MANUAL Code: D198N61_DDS06 Date: 15/07/09 Page: 5 of 16 01.01.00/1 Rev.1 2. UNPACKING AND CHECKING The following elements are supplied in the box: BSR75 50Ω / 20W load termination Power Supply Cable Maintenance Cable Two Ethernet Cables The equipment is supplied with all the modules already assembled in the rack. The modules in the basic configuration are: Power Supply module (RPS), Power Amplifier (RPA75), Transmitter (RTX75), Receiver (RRX) and Control (RCPU). Synchronism module (BSYNC) is necessary …

Text truncated - open the document above for the full version.

TELTRONIC S.A.U. CIF/NIF: A-50035518 Polígono Malpica, C/ F Oeste 50057 Zaragoza (Spain) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: WT7 PTRNKTBSR75450 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block diagrams BSR75_BLOCK_DIAGRAMS.pdf Parts List Part_List.pdf Circuit Description BSR75_CIRCUITS_DESCRIPTION.pdf Tune Up procedure BSR75_Test_ Operation_ Manual.pdf Schematic Schematics_1.pdf Schematic Schematics_2.pdf Schematic Schematics_3.pdf Schematic Schematics_4.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name User and Installation Manual BSR75_User_Instalation_Manual.pdf External Photos EXT_DOSSIER_BSR75_450.pdf Internal Photos DOSSIER_BACKPLANE__BSR75.pdf Internal Photos DOSSIER_BSYNC__BSR75.pdf Internal Photos DOSSIER_RCPU_BSR75.pdf Internal Photos DOSSIER_RPA75_BSR75.pdf Internal Photos DOSSIER_RPS75__BSR75.pdf Internal Photos DOSSIER_RRX_BSR75.pdf Internal Photos DOSSIER_RTX75__BSR75.pdf Sincerely, José Román Gimeno Certification & Services Area Manager

DOSSIER BSR75 01.01.00/1 Rev.1 PRODUCT: BSR75 CODE: VERSION: 01 REVISION: 00 DATE: 21/09/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 6 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 21/09/09 A. Narvaiza Pictures of BSR75 DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER BSR75 Date: 15/07/09 Page: 2 of 6 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: DOSSIER BSR75 Date: 15/07/09 Page: 3 of 6 01.01.00/1 Rev.1 CONTENTS: 1.
BSR75 ........................................................................................................................4
1.1.
INTRODUCTION ..................................................................................................4
1.2.
FRONT PICTURE.................................................................................................5
1.3.
REAR PICTURE ...................................................................................................5
1.4.
GENERAL PICTURES .........................................................................................6
Code: DOSSIER BSR75 Date: 15/07/09 Page: 4 of 6 01.01.00/1 Rev.1 1. BSR75 1.1. INTRODUCTION The following pictures are:
Front picture
Rear picture
General picture Code: DOSSIER BSR75 Date: 15/07/09 Page: 5 of 6 01.01.00/1 Rev.1 1.2. FRONT PICTURE 1.3. REAR PICTURE Code: DOSSIER BSR75 Date: 15/07/09 Page: 6 of 6 01.01.00/1 Rev.1 1.4. GENERAL PICTURES

BSR75 IDENTIFICATION LABEL 01.01.00/1 Rev.1 PRODUCT: BSR75 CODE: VERSION: 01 REVISION: 01 DATE: 6/10/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 5 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 21/09/09 A. Narvaiza Identification Label of BSR75 1.1 6/10/09 José Román Changes in FCC and Identification labels DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director BSR75 IDENTIFICATION LABEL Code: Date: 06/10/09 Page: 2 of 5 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. BSR75 IDENTIFICATION LABEL Code: Date: 06/10/09 Page: 3 of 5 01.01.00/1 Rev.1 CONTENTS: 1. BSR75 ........................................................................................................................ 4 1.1. INTRODUCTION .................................................................................................. 4 1.2. LABEL ................................................................................................................. 4 1.3. LABEL LOCATION: ............................................................................................. 5 BSR75 IDENTIFICATION LABEL Code: Date: 06/10/09 Page: 4 of 5 01.01.00/1 Rev.1 1. BSR75 1.1. INTRODUCTION The identification Label is situated in the rear of the BSR75. The label is a silver paper polyester film laminate. 1.2. LABEL Label Colors: Silver and Black. MADEINEU BSR75450-470MHz S/N:XXXXXX D138861 PowerTrunk FCCIDWT7PTRNKTBSR75450 ICxxxxxxxxxx Restricted to occupational use to safety FCC RF energy exposure limits. See user manual for awareness and control info. Notice! 79 mm 10 mm BSR75 IDENTIFICATION LABEL Code: Date: 06/10/09 Page: 5 of 5 01.01.00/1 Rev.1 1.3. LABEL LOCATION: Label Location LABEL HERE LABEL HERE LABEL HERE LABEL HERE LABEL HERE LABEL HERE

DOSSIER BACKPLANE BSR75 01.01.00/1 Rev.1 PRODUCT: BACKPLANE BSR75 CODE: VERSION: 01 REVISION: 00 DATE: 15/07/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 4 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 15/07/09 A. Narvaiza Pictures of BACKPLANE BSR75 DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER BACKPLANE BSR75 Date: 15/07/09 Page: 2 of 4 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: DOSSIER BACKPLANE BSR75 Date: 15/07/09 Page: 3 of 4 01.01.00/1 Rev.1 CONTENTS: 1.
BACKPLANE BSR75 ................................................................................................4
1.1.
BACKPLANE PCB TOP LAYER PICTURE .........................................................4
1.2.
BACKPLANE PCB BOTTOM LAYER PICTURE .................................................4
Code: DOSSIER BACKPLANE BSR75 Date: 15/07/09 Page: 4 of 4 01.01.00/1 Rev.1 1. BACKPLANE BSR75 1.1. BACKPLANE PCB TOP LAYER PICTURE 1.2. BACKPLANE PCB BOTTOM LAYER PICTURE

DOSSIER BSYNC BSR75 01.01.00/1 Rev.1 PRODUCT: BSYNC CODE: VERSION: 01 REVISION: 00 DATE: 15/07/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 5 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 15/07/09 A. Narvaiza Pictures of BSYNC DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER BSYNC BSR75 Date: 15/07/09 Page: 2 of 5 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: DOSSIER BSYNC BSR75 Date: 15/07/09 Page: 3 of 5 01.01.00/1 Rev.1 CONTENTS: 1.
BSYNC .......................................................................................................................4
1.1.
FRONT PICTURE.................................................................................................4
1.2.
BSYNC PCB TOP LAYER PICTURE ...................................................................5
1.3.
BSYNC PCB BOTTOM LAYER PICTURE ...........................................................5
Code: DOSSIER BSYNC BSR75 Date: 15/07/09 Page: 4 of 5 01.01.00/1 Rev.1 1. BSYNC 1.1. FRONT PICTURE Code: DOSSIER BSYNC BSR75 Date: 15/07/09 Page: 5 of 5 01.01.00/1 Rev.1 1.2. BSYNC PCB TOP LAYER PICTURE 1.3. BSYNC PCB BOTTOM LAYER PICTURE Crystal Oscillator Package

DOSSIER RCPU BSR75 01.01.00/1 Rev.1 PRODUCT: RCPU CODE: VERSION: 01 REVISION: 00 DATE: 15/07/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 6 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 15/07/09 A. Narvaiza Pictures of RCPU DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER RCPU BSR75 Date: 15/07/09 Page: 2 of 6 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: DOSSIER RCPU BSR75 Date: 15/07/09 Page: 3 of 6 01.01.00/1 Rev.1 CONTENTS: 1. RCPU ...............................................................................................................................4
1.1.
FRONT PICTURE.................................................................................................4
1.2.
RCPU PCB TOP LAYER PICTURE .....................................................................5
1.3.
RCPU PCB BOTTOM LAYER PICTURE .............................................................6
Code: DOSSIER RCPU BSR75 Date: 15/07/09 Page: 4 of 6 01.01.00/1 Rev.1 1. RCPU 1.1. FRONT PICTURE Code: DOSSIER RCPU BSR75 Date: 15/07/09 Page: 5 of 6 01.01.00/1 Rev.1 1.2. RCPU PCB TOP LAYER PICTURE Code: DOSSIER RCPU BSR75 Date: 15/07/09 Page: 6 of 6 01.01.00/1 Rev.1 1.3. RCPU PCB BOTTOM LAYER PICTURE

DOSSIER RPA75 BSR 01.01.00/1 Rev.1 PRODUCT: RPA75 CODE: VERSION: 01 REVISION: 00 DATE: 21/09/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 13 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 21/09/08 A. Narvaiza Pictures of RPA75 DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 2 of 13 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A. Unipersonal welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A. Unipersonal be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A. Unipersonal and the customer. Teltronic S.A. Unipersonal reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A. Unipersonal. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A. Unipersonal and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. Teltronic and the Teltronic logo are registered trademarks of Teltronic S.A. Unipersonal. Copyright © Teltronic S.A. Unipersonal. All rights reserved. Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 3 of 13 01.01.00/1 Rev.1 CONTENTS: 1.
RPA75 .......................................................................................................................4 1.1 FRONT PICTURE.................................................................................................4 1.2 RPA75 PCB TOP PICTURE.................................................................................5 1.3 RPA75 PCB BOTTOM PICTURE.........................................................................6 1.4 INPUT PCB TOP PICTURE.................................................................................7 1.5 INPUT PCB BOTTOM PICTURE..........................................................................8 1.6 OUTPUT PCB TOP PICTURE .............................................................................9 1.7 OUTPUT PCB BOTTOM PICTURE ..................................................................10 1.8 RPA75 GENERAL PICTURES ..........................................................................11 Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 4 of 13 01.01.00/1 Rev.1 1. RPA75 1.1. FRONT PICTURE Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 5 of 13 01.01.00/1 Rev.1 1.2. RPA75 PCB TOP PICTURE Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 6 of 13 01.01.00/1 Rev.1 1.3. RPA75 PCB BOTTOM PICTURE Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 7 of 13 01.01.00/1 Rev.1 1.4. INPUT PCB TOP PICTURE Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 8 of 13 01.01.00/1 Rev.1 1.5. INPUT PCB BOTTOM PICTURE Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 9 of 13 01.01.00/1 Rev.1 1.6. OUTPUT PCB TOP PICTURE Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 10 of 13 01.01.00/1 Rev.1 1.7. OUTPUT PCB BOTTOM PICTURE Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 11 of 13 01.01.00/1 Rev.1 1.8. RPA75 GENERAL PICTURES Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 12 of 13 01.01.00/1 Rev.1 Code: DOSSIER RPA75 BSR Date: 21/09/09 Page: 13 of 13 01.01.00/1 Rev.1

DOSSIER RPS75 BSR75 01.01.00/1 Rev.1 PRODUCT: RPS75 CODE: VERSION: 01 REVISION: 00 DATE: 15/07/09 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 5 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 15/07/09 A. Narvaiza Pictures of RPS75 DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: DOSSIER RPS75 BSR75 Date: 15/07/09 Page: 2 of 5 01.01.00/1 Rev.1 Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A. Unipersonal, and the liability of Teltronic S.A. Unipersonal for any errors and omissions shall …

Text truncated - open the document above for the full version.