WT7PTRNKTMBS410Teltra Base Station

MBS USER AND INSTALLATION MANUAL 01.01.00/1 Rev.1 PRODUCT: MBS CODE: D148X01_DDS06 VERSION: 01 REVISION: 00 DATE: 05/10/11 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 17 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 05/10/11 Javier Córdova First edition. DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: D148X01_DDS06 MBS USER AND INSTALLATION MANUAL Date: 05/10/11 Page: 2 of 38 01.01.00/1 Rev.1 PowerTrunk Inc. is the subsidiary of Teltronic S.A.U. responsible for business development, distribution and customer support for Teltronic’s Land Mobile Radio products in North America. The company is headquartered in New York City. Teltronic S.A.U. distributes the same products for Land Mobile Radio under different trademarks and brand names in other regions of the world. Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A.U. and/or PowerTrunk Inc., and the liability of Teltronic S.A.U. and/or PowerTrunk Inc. for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A.U. and/or PowerTrunk Inc. welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A.U. and/or PowerTrunk Inc. be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A.U. and/or PowerTrunk Inc. and the customer. Teltronic S.A.U. and/or PowerTrunk Inc. reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A.U. and/or PowerTrunk Inc. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A.U. and/or PowerTrunk Inc. and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. PowerTrunk and the PowerTrunk logo are registered trademarks of Teltronic S.A.U. Copyright © PowerTrunk Inc. All rights reserved Code: D148X01_DDS06 MBS USER AND INSTALLATION MANUAL Date: 05/10/11 Page: 3 of 38 01.01.00/1 Rev.1 CONTENTS: 1. INTRODUCTION .......................................................................................................... 4 2. UNPACKING AND CHECKING ................................................................................... 4 3. PREVIOUS CONSIDERATIONS.................................................................................. 4 4. INFORMATION ON SAFETY AND ELECTROMAGNETIC COMPATIBILITY ............ 5 4.1. STANDARDS ......................................................................................................... 5 4.2. FCC REGULATIONS COMPLIANCE.................................................................... 6 4.3. MECHANICAL AND ENVIRONMENTAL STANDARDS....................................... 7 5. EQUIPMENT DESCRIPTION ....................................................................................... 9 5.1. VIEW ...................................................................................................................... 9 5.2. CONNECTORS .................................................................................................... 10 6. INSTALLATION GUIDE ............................................................................................. 12 6.1. NECESSARY EQUIPMENT................................................................................. 13 6.2. BASIC PRE-CONFIGURATION .......................................................................... 15 6.3. INSTALLATION ................................................................................................... 16 6.3.1. MAST/POLE INSTALLATION ........................................................................... 17 6.3.2. WALL INSTALLATION...................................................................................... 22 6.3.3. ANTI-VANDAL KIT INSTALLATION ................................................................. 25 6.3.4. CONNECTIONS................................................................................................ 27 6.3.4.1. SUPPORTED CONFIGURATIONS ............................................................ 28 6.3.4.2. CONNECTION OF THE EXTERNAL POWER SUPPLY ............................ 31 6.3.4.3. ANTENNA CONNECTION.......................................................................... 34 6.3.4.4. EXTERNAL ETHERNET CONNECTION ................................................... 35 6.3.4.5. CONNECTION BETWEEN TWO MBS UNITS ........................................... 36 7. START UP/CONFIGURATION/VERIFICATION ........................................................ 37 8. INCIDENTS................................................................................................................. 38 8.1. INTERFERENCE AT MBS UNIT ......................................................................... 38 8.2. OVER VO…

Text truncated - open the document above for the full version.

FCC Confidential Authorization October 14, 2011 FEDERAL COMMUNICATIONS COMMISSIONS Authorizat ion and Evaluation Divisio n 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: WT7PTRNKTMBS410 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, TELTRONIC S.A.U. hereby requests long-term confidential treatment of information accompanying this application as outlined below: x Block Diagram x Schematics x Part list x Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Jose Roman Gimeno Certifications & Services Area Manager TELTRONIC S.A.U. Poligono Malpica, calle F Oeste 50057 Zaragoza (Spain)

FCC Authorization November 9, 2011 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We TELTRONIC S.A.U. , the undersigned, Hereby authorizes Bay Area Compliance Laboratory Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Sincerely Yours, Jose Roman Gimeno Certifications & Services Area Manager TELTRONIC S.A.U. Poligono Malpica, calle F Oeste 50057 Zaragoza (Spain)

DOSSIER MBS 01.01.00/1 Rev.1 PRODUCT: MBS CODE: D148X01PT VERSION: 01 REVISION: 00 DATE: 03/11/2011 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 6 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 03/11/2011 Pictures of MBS DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: D148X01PT DOSSIER MBS Date: 2011-11-08 Page: 2 of 6 01.01.00/1 Rev.1 PowerTrunk Inc. is the subsidiary of Teltronic S.A.U. responsible for business development, distribution and customer support for Teltronic’s Land Mobile Radio products in North America. The company is headquartered in New York City. Teltronic S.A.U. distributes the same products for Land Mobile Radio under different trademarks and brand names in other regions of the world. Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A.U. and/or PowerTrunk Inc., and the liability of Teltronic S.A.U. and/or PowerTrunk Inc. for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A.U. and/or PowerTrunk Inc. welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A.U. and/or PowerTrunk Inc. be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A.U. and/or PowerTrunk Inc. and the customer. Teltronic S.A.U. and/or PowerTrunk Inc. reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A.U. and/or PowerTrunk Inc. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A.U. and/or PowerTrunk Inc. and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. PowerTrunk and the PowerTrunk logo are registered trademarks of Teltronic S.A.U. Copyright © PowerTrunk Inc. All rights reserved Code: D148X01PT DOSSIER MBS Date: 2011-11-08 Page: 3 of 6 01.01.00/1 Rev.1 CONTENTS: 1. MBS .............................................................................................................................. 4 1.1. INTRODUCTION .................................................................................................... 4 1.2. FRONT PICTURE .................................................................................................. 5 1.3. REAR PICTURE .................................................................................................... 5 1.4. GENERAL PICTURES........................................................................................... 6 Code: D148X01PT DOSSIER MBS Date: 2011-11-08 Page: 4 of 6 01.01.00/1 Rev.1 1. MBS 1.1. INTRODUCTION The following pictures are: ƒ Front picture ƒ Rear picture ƒ General picture Code: D148X01PT DOSSIER MBS Date: 2011-11-08 Page: 5 of 6 01.01.00/1 Rev.1 1.2. FRONT PICTURE 1.3. REAR PICTURE Code: D148X01PT DOSSIER MBS Date: 2011-11-08 Page: 6 of 6 01.01.00/1 Rev.1 1.4. GENERAL PICTURES Right picture Left picture Top picture Lower picture

MBS IDENTIFICATION LABEL 01.01.00/1 Rev.1 PRODUCT: MBS CODE: D148X01PT_DDS07 VERSION: 01 REVISION: 00 DATE: 05/10/11 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 5 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 15/07/09 J. Córdova First edition. DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: D148X01PT_DDS07 MBS IDENTIFICATION LABEL Date: 05/10/11 Page: 2 of 5 01.01.00/1 Rev.1 PowerTrunk Inc. is the subsidiary of Teltronic S.A.U. responsible for business development, distribution and customer support for Teltronic’s Land Mobile Radio products in North America. The company is headquartered in New York City. Teltronic S.A.U. distributes the same products for Land Mobile Radio under different trademarks and brand names in other regions of the world. Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A.U. and/or PowerTrunk Inc., and the liability of Teltronic S.A.U. and/or PowerTrunk Inc. for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A.U. and/or PowerTrunk Inc. welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A.U. and/or PowerTrunk Inc. be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A.U. and/or PowerTrunk Inc. and the customer. Teltronic S.A.U. and/or PowerTrunk Inc. reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A.U. and/or PowerTrunk Inc. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A.U. and/or PowerTrunk Inc. and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. PowerTrunk and the PowerTrunk logo are registered trademarks of Teltronic S.A.U. Copyright © PowerTrunk Inc. All rights reserved Code: D148X01PT_DDS07 MBS IDENTIFICATION LABEL Date: 05/10/11 Page: 3 of 5 01.01.00/1 Rev.1 CONTENTS: 1. MBS .............................................................................................................................. 4 1.1. INTRODUCTION .................................................................................................... 4 1.2. LABEL ................................................................................................................... 4 1.3. LABEL LOCATION: .............................................................................................. 5 Code: D148X01PT_DDS07 MBS IDENTIFICATION LABEL Date: 05/10/11 Page: 4 of 5 01.01.00/1 Rev.1 1. MBS 1.1. INTRODUCTION The identification Label is situated in the rear of the MBS Unit. The label is a silver paper polyester film laminate. 1.2. LABEL Label Colors: Silver and Black. Label 1 Label 2 Label 3 Code: D148X01PT_DDS07 MBS IDENTIFICATION LABEL Date: 05/10/11 Page: 5 of 5 01.01.00/1 Rev.1 1.3. LABEL LOCATION: 1 2 3 Label 1 Label 2 Label 3

DOSSIER MBS 01.01.00/1 Rev.1 PRODUCT: MBS CODE: PE148X10 VERSION: 01 REVISION: 00 DATE: 2011/11/03 CLASSIFICATION: General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 12 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 11/11/03 A. Narvaiza Pictures of MBS DOCUMENT APPROVAL ACTIVITY NAME DATE SIGNATURE Prepared Revised Project Manager Approved R&D Director Code: PE148X10 DOSSIER MBS Date: 11/11/03 Page: 2 of 12 01.01.00/1 Rev.1 PowerTrunk Inc. is the subsidiary of Teltronic S.A.U. responsible for business development, distribution and customer support for Teltronic’s Land Mobile Radio products in North America. The company is headquartered in New York City. Teltronic S.A.U. distributes the same products for Land Mobile Radio under different trademarks and brand names in other regions of the world. Disclaimer Although every reasonable effort has been made to ensure the accuracy of the information contained herein and any other referred document, this should not be construed as a commitment on the part of Teltronic S.A.U. and/or PowerTrunk Inc., and the liability of Teltronic S.A.U. and/or PowerTrunk Inc. for any errors and omissions shall be limited to the correction of such errors and omissions. Teltronic S.A.U. and/or PowerTrunk Inc. welcomes any comment as a way to improve any delivered documentation. The information contained herein has been prepared for the use of appropriately trained personnel, and it is intended for the purpose of the agreement under which the information is submitted. Any party using or relying upon this information assumes full responsibility for such use and in no event shall Teltronic S.A.U. and/or PowerTrunk Inc. be liable to anyone for especial, collateral, incidental, or consequential damages in connection with or arising out of the use of this information. The information or statements given in these documents regarding the suitability, capacity or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Teltronic S.A.U. and/or PowerTrunk Inc. and the customer. Teltronic S.A.U. and/or PowerTrunk Inc. reserves the right to revise these documents and to make changes to its content at any time, without prior notification. Copyrights No part of the information contained herein and the other referred documents may be copied, distributed or transmitted by any means to any other party without prior written permission of Teltronic S.A.U. and/or PowerTrunk Inc. The distribution of this document may be also covered by NDA (non-disclosure agreement) between Teltronic S.A.U. and/or PowerTrunk Inc. and the receiver. Please also note that part of these contents even may be covered by patent rights. This document, the referred documents and the described product are considered protected by copyright according to the applicable laws. PowerTrunk and the PowerTrunk logo are registered trademarks of Teltronic S.A.U. Copyright © PowerTrunk Inc. All rights reserved Code: PE148X10 DOSSIER MBS Date: 11/11/03 Page: 3 of 12 01.01.00/1 Rev.1 CONTENTS: 1. BACKPLANE PCB...............................................................................................................4 1.1. BACKPLANE PCB TOP LAYER PICTURE ..................................................................4 1.2. BACKPLANE PCB BOTTOM LAYER PICTURE..........................................................4 2. ENCRYPTION PCB..............................................................................................................5 2.1. ENCRYPTION PCB TOP LAYER PICTURE .................................................................5 2.2. ENCRYPTION PCB BOTTOM LAYER PICTURE.........................................................5 3. MNI PCB...............................................................................................................................6 3.1. MNI PCB TOP LAYER PICTURE ..................................................................................6 3.2. MNI PCB BOTTOM LAYER PICTURE..........................................................................6 4. MULTICOUPLER PCB.........................................................................................................7 4.1. MULTICOUPLER PCB TOP LAYER PICTURE ............................................................7 4.2. MULTICOUPLER PCB BOTTOM LAYER PICTURE....................................................7 5. RCPU PCB ...........................................................................................................................8 5.1. RCPU PCB TOP LAYER PICTURE ..............................................................................8 5.2. RCPU PCB BOTTOM LAYER PICTURE ......................................................................8 6. RPA PCB..............................................................................................................................9 6.1. RPA PCB TOP LAYER PICTURE .................................................................................9 6.2. RPA PCB BOTTOM LAYER PICTURE.........................................................................9 7. RRX PCB............................................................................................................................10 7.1. RRX PCB TOP LAYER PICTURE ...............................................................................10 7.2. RRX PCB BOTTOM LAYER PICTURE.......................................................................10 8. RTX PCB ............................................................................................................................11 8.1. RTX PCB TOP LAYER PICTURE ...............................................................................11 8.2. RTX PCB BOTTOM LAYER PICTURE .......................................................................11 9. SWITCH PCB ............................................................................................…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, NIST, or any agency of the Federal Government. * This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “*” (Rev.2) FCC PART 90 IC RSS-119, ISSUE 11, JUNE 2011 TEST AND MEASUREMENT REPORT For Teltronic S.A.U. Poligono Malpica, Calle F Oeste, Parcela 12, 50057 Zaragoza, Spain FCC ID: WT7PTRNKTMBS410 IC: 8624A-PTMBS410 Model: MBS Unit 409-430MHz Report Type: Original Report Product Type: Power Trunk Test Engineer: Ning Ma Report Number: R1110131-90 Report Date: 2012-01-04 Reviewed By: Victor Zhang EMC/RF Lead Prepared By: (RZ) Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94085, U.S.A. Tel: (408) 732-9162 Fax: (408) 732 9164 www.baclcorp.com Teltronic S.A.U. FCC ID: WT7PTRNKTMBS410, IC: 8624A-PTMBS410 Report Number: R1110131-90 Page 2 of 54 FCC Part 90, IC RSS-119 Test Report TABLE OF CONTENTS 1. General Information............................................................................................................................................. 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)........................................................................ 6 1.2 MECHANICAL DESCRIPTION........................................................................................................................... 6 1.3 OBJECTIVE...................................................................................................................................................... 6 1.4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................... 6 1.5 TEST METHODOLOGY..................................................................................................................................... 7 1.6 MEASUREMENT UNCERTAINTY...................................................................................................................... 7 1.7 TEST FACILITY............................................................................................................................................... 7 2 System Test Configuration................................................................................................................................... 8 2.1 JUSTIFICATION................................................................................................................................................ 8 2.2 EQUIPMENT MODIFICATIONS.......................................................................................................................... 8 2.3 LOCAL SUPPORT EQUIPMENT......................................................................................................................... 8 2.4 INTERNAL CONFIGURATION............................................................................................................................ 8 2.5 INTERFACE PORTS AND CABLING................................................................................................................... 8 2.6 TEST SETUP BLOCK DIAGRAM........................................................................................................................ 9 3 Summary of Test Results ................................................................................................................................... 10 4 FCC §2.1091 & IC RSS-102 - RF Exposure Information ............................................................................... 11 4.1 APPLICABLE STANDARDS............................................................................................................................. 11 5 FCC §2.1046, §90.205 & IC RSS-119 §5.4 – Conducted Output Power ........................................................ 14 5.1 APPLICABLE STANDARD...............................................................................................................................14 5.2 TEST PROCEDURE......................................................................................................................................... 14 5.3 TEST ENVIRONMENTAL CONDITIONS............................................................................................................ 14 5.4 TEST EQUIPMENT LIST AND DETAILS........................................................................................................... 14 5.5 TEST RESULT................................................................................................................................................ 14 6 FCC §2.1047, §90.207 & IC RSS-119 §5.2 – Modulation Characteristic....................................................... 15 6.1 APPLICABLE STANDARD...............................................................................................................................15 6.2 TEST PROCEDURE......................................................................................................................................... 15 6.3 TEST RESULT................................................................................................................................................ 15 7 FCC §2.1049, §90.209, §90.210 & IC RSS-119 §5.8 – Occupied Bandwidth & Emission Mask .................. 17 7.1 APPLICABLE STANDARD...............................................................................................................................17 7.2 TEST PROCEDURE......................................................................................................................................... 18 7.3 TEST ENVIRONMENTAL CONDITIONS.............................................................................…

Text truncated - open the document above for the full version.