WUI-RD030015DGMicrowave Sensor Module for LED Linkable Shoplight

Specification Niou RD030015DG LED LINKABLE SHOPLIGHT Specification File status： [ ] Draft [√ ] Published [ ] Pending File name： Product specification Version： V1.0 Editor： Finished date： Version Editor Participator Valid from Remark V1.0 Henry Ho 2021-2-8 Specification -20°C–60°C 0 Amendment 1 Feature ⚫ RD030015DG microwave module, which applies self-R&D microwave chip, can effectively sense human and entity motion ⚫ Light sensor is available when correspondent component is extra-connected ⚫ IR remote is available when correspondent component is extra-connected and microwave motion sensor distance,hold time,lux threshold etc can be adjusted by IR remote ⚫ Plate-antenna applied for the sake of max long-distance detection purpose ⚫ RGB background mode available ⚫ Working temperature be -20 deg C to +70 deg C 2 Application ⚫ Lighting ⚫ Security ⚫ Smart home 3 Specification Working voltage 7.5-12VDC Working current <30mA Stand-by power <0.5W Working temperature -20°C-70°C Frequency Range 5830MHz-5862MHz Microwave power <0.3W Detection degree 30 - 150° Mounting height Max.4.5m(ceiling mounted) Sense distance Very near/Near/Medium/Far Hold time OFF/30s/10min/30min Specification 4 Drawing Sense distance Distance level Very near Near Medium Far Distance range 1 - 2 2 - 3.5 3.5 - 5 5 - 7 Specification 5 Remark ⚫ Sense range will be different according to different install height and sense angle ⚫ Application environment, entity motion velocity etc will effect module sense range ,so above sense range is only for your reference based on ideal circumstance ⚫ Actual lux threshold is related to your light case material, our value is this specification is only for reference Specification FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Increase the separation between the equipment and receiver. -- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product “Contains Transmitter module FCC ID: WUI-RD030015DG The modular must be installed in the host that assign by Company name: Winplus Co., Ltd. Product/PMN: 46” LED LINKABLE SHOP LIGHT Model no./HVIN: LM030015 if other host types used would need further evaluation and possible C2PC if they are not significantly similar to the one tested. IC Information -English: 1. This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. -French: Leprésent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio Exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement." Cet appareil est conforme aux limitesd'exposition de rayonnement RF ISEDC établiespour un environnement non contrôlé. Pour satisfaire la ISED extérieur étiquetage, le texte suivant doit être placéàl’extérieur du produit final “Contains émetteur module IC: 7297A-RD030015DG The modular must be installed in the host that assign by Le modulaire doit être installé dans l'hôte assigné par Nom de la compagnie: Winplus Co., Ltd. Produit/PMN: 46” LED LINKABLE SHOP LIGHT Modèle no./HVIN: LM030015 if other host types used would need further evaluation and possible C2PC if they are not significantly similar to the one tested. si d'autres types d'hôtes utilisés nécessiteraient une évaluation plus poussée et un C2PC possible s'ils ne sont pas significativement similaires à celui testé

Report Number: 68.940.21.0029.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 RF exposure Estimation Introduction RD030015DG (FCC ID: WUI-RD030015DG) is a LED LINKABLE SHOPLIGHT, which contain 5.8GHz Microwave function inside. Note: The radio module does not have shielded cover, so it was tested with a host for this Modular approve application, the host information as below: Company name: Winplus Co., Ltd. Product/PMN: 46” LED LINKABLE SHOP LIGHT Model no./HVIN: LM030015 1. Limit and Guidelines on Exposure to Electromagnetic Fields According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 General RF Exposure Guidance v06, Mobile Portable RF Exposure, no SAR required if power is lower than the flowing threshold: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation25 • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 2. Calculation method [(max. power of` channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 According to ANSI C63.10-2013 (9.5 Equations to calculate EIRP), Report Number: 68.940.21.0029.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Field Strength (EMeas): 75.88 (dBuV/m) (f=5862Hz) Measurement Distance(dMeas): 3 (m) Equivalent Isotropically Radiated Power(EIRP): 0.0118 (mW) Radiated Power + tune up tolerance = 0.0118 mW Distance = 5 mm f = 5.862 GHz [0.0118/5] * SQRT(5.862) =0.0057 0.0057 ≤ 3.0 Therefore, excluded from SAR testing. TUV SUD China, Shenzhen Branch Reviewed by: Prepared By: Dawi Xu/ EMC Project Manager Henry Chen/EMC Project Engineer Date: 2021-05-13 Date: 2021-05-13

Winplus Co., Ltd. Date (2021-05-13) TUV SUD BABT UNLIMITED TCB Octagon House, Segensworth North, Fareham, Hampshire, PO15 5RL, United Kingdom Confidentiality Request FCC ID: WUI-RD030015DG Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, (Winplus Co. Ltd) hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation] The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Benson Leung Telephone Number: +852 2798 8932 Email: [email protected]

Winplus Co., Ltd. Date (2021-05-13) TUV SUD BABT UNLIMITED TCB Octagon House, Segensworth North, Fareham, Hampshire, PO15 5RL, United Kingdom Dear Sir/Madam, RE: Modular Approval Request for Model: FCC ID: WUI-RD030015DG The following attestation addresses the requirements to support modular approval: Modular approval requirement Yes No * (a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly √ The radio module do not has shielded cover, so it was tested with a host for this modular approve application, the host information as below Company name: Winplus Co., Ltd. Product/PMN: 46” LED LINKABLE SHOP LIGHT Model no./HVIN: LM030015 (b) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal √ (c) The module must contain power supply regulation on the module √ (d) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) √ (e) The module must demonstrate compliance in a stand-alone configuration √ (f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) √ (g) The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements √ (h) The module must comply with RF exposure requirements √ * Please provide a detailed explanation if the answer is “No.” Winplus Co., Ltd. Yours sincerely, Name: Benson Leung Title: Director

External Photos Details of: Inside view Details of: Inside view Antenna Location

Label: Label Location

Internal Photos Details of: Inside view Details of: Inside view Antenna Location

Report Number: 68.940.21.0029.01 EMC_SZ_FR_23.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 1 of 27 FCC/ISED - TEST REPORT Report Number : 68.940.21.0029.01 Date of Issue: May 13, 2021 Model : RD030015DG Product Type : LED LINKABLE SHOPLIGHT Applicant : Winplus Co., Ltd. Address : Suites 6-11, 7th Floor, Corporation Park, 11 On Lai Street, Shatin, Hong Kong Manufacturer : ADC Solutions Hardware, LLC Address : 2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626 Test Result : ◼ Positive  Negative Total pages including Appendices : 27 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval Report Number: 68.940.21.0029.01 EMC_SZ_FR_23.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 2 of 27 1 Table of Contents 1 Table of Contents ................................................................................................................................................................. 2 2 Details about the Test Laboratory ........................................................................................................................................ 3 3 Description of the Equipment Under Test ........................................................................................................................... 4 4 Summary of Test Standards ................................................................................................................................................. 5 5 Summary of Test Results ..................................................................................................................................................... 6 6 General Remarks ................................................................................................................................................................. 7 7 Test setups ........................................................................................................................................................................... 8 8 Technical Requirement ........................................................................................................................................................ 9 8.1 Conducted Emission ..................................................................................................................................................... 9 8.2 Field strength of emissions and Restricted bands ....................................................................................................... 12 8.3 Out of Band Emissions ............................................................................................................................................... 17 8.4 20dB Bandwidth ......................................................................................................................................................... 22 9 Test equipment lists ........................................................................................................................................................... 26 10 System Measurement Uncertainty ................................................................................................................................... 27 Report Number: 68.940.21.0029.01 EMC_SZ_FR_23.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 3 of 27 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China FCC Registration Number: 514049 FCC Designation Number: CN5009 ISED#: 10320A CAB identifier: CN0077 Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 Report Number: 68.940.21.0029.01 EMC_SZ_FR_23.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 4 of 27 3 Description of the Equipment Under Test Description of the Equipment Under Test Product/PMN: LED LI…

Text truncated - open the document above for the full version.

Test Setup Photos Conducted Emission test Radiated Emission test (1# Test Site) Below 1GHz Radiated Emission test (2# Test Site) 1-18GHz Radiated Emission test (2# Test Site) 18-40GHz