WWMMN421V1Wireless Lite-N USB Module

PW-MN421 Wireless Lite-N USB Module COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of PROWARE TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from PROWARE TECHNOLOGIES CO., LTD. Copyright © 2010 PROWARE TECHNOLOGIES CO., LTD. All rights reserved. http://www.proware.com.cn FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user‟s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark Bulgaria General authorization required for outdoor use and public service France Outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz Military Radiolocation use. Refarming of the 2.4 GHz band has been ongoing in recent years to allow current relaxed regulation. Full implementation planned 2012 Italy If used outside of own premises, general authorization is required Luxembourg None General authorization required for network and service supply(not for spectrum) Norway Implemented This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund Russian Federation Only for indoor applications Note: Please don‟t use the product outdoors in France. CONTENTS Package Contents .................................................................................................... 1 Chapter 1 Introduction ........................................................................................... 2 1.1 Overview of the Product .......................................................................................... 2 1.2 Features .................................................................................................................. 2 Chapter 2 Installation Guide .................................................................................. 3 2.1 Hardware Installation .............................................................................................. 3 2.2 Software Installation ................................................................................................ 3 Appendix A: Specifications ..................................................................................... 8 Appendix B: Glossary .............................................................................................. 9 1 Package Contents The following items should be found in your package:  PW-MN421 Wireless Lite-N USB Module  Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor. Conventions: The „Module‟ mentioned in this user guide stands for PW-MN421 Wireless Lite-N USB Module without any explanations. PW-MN421 Wireless Lite-N USB Module 2 Chapter 1 Introduction Thank you for choosing the PW-MN421 Wireless Lite-N USB Module! 1.1 Overview of the Product The module is an 802.11n client device. It is mainly designed to provide a high-speed and unrivaled wireless performance for wireless embedded system application. With a faster wireless connection, you can get a better Internet experience without the cost of running network cables. With the 802.11n technology, the PW-MN421‟s auto-sensing capability allows high packet transfer rate of up to 150Mbps for maximum throughput. It has good capability on anti-jamming, and it can also interoperate with other wireless (802.11b/g/n) products. The module supports WEP, WPA and WPA2 encryption to prevent outside intrusion and protect your personal information from being exposed. With unmatched wireless performance, receptio…

Text truncated - open the document above for the full version.

RFA-02-C2H1 Specifications Frequency range 2400 MHz – 2500 MHz Antenna gain 2 dBi VSWR 2.0 : 1 Max. Polarization Linear, vertical Impedance 50 Ω Temperature - 10°C to +55°C Connector I-PEX Cable 1.13 3 4 9 外套<黑> ν B2WSL003L1151I @WSL003 13.4φ*115L 外套 <黑><弘大模具>黑1 或同級品 8 銅管 27L ν B252L2700000A5 @5.2φ*27L*0.2T 銅管<平頭>銀1 或同級品 7 固定鉚釘(黑鋅) ν B02892200160A5 @028922001-6 4.80*1.95φ固定鉚釘<大>(黑鋅)黑2 或同級品 6 下座<黑> ν B13255L810001I @13φ下座 * 25.5L(8.1扁孔凹槽) <黑>黑1 或同級品 5 上座<黑> ν B130L028000A1I @13φ上座 * 28L <黑> 黑1 或同級品 4連接軸ν B0SM3056C000A5 @SM3056-C 連接軸銀1 或同級品 3 絕緣 母PIN ν B0SM3056B000A5 @SM3056-B 絕緣 母PIN白/金1 或同級品 2 RP-SMA φ12.5 本體 ν B0SM3056A000A5 @SM3056-A 本體 RP-SMA(M) φ12.5 Connector W/P黑1 或同級品 1 RG-178 Coaxial Cable ν 19RG17800030AE @RG-178 CABLE 105SV(萬泰)橙 1251 或同級品 NO 材料名稱 環材 電腦編號零件規格顏色 切斷尺寸 用量 備註

1, “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2, “The modular transmitter must have buffered modulation data inputs.” The EUT has buffered data inputs, and it is integrated in chip AR9271 3,“The modular transmitter must have its own power supply regulation.” The USB interface provides 5.0V DC, the on board power IC RT8010 convert 5.0V DC to 3.3V DC 4,“The modular transmitter must comply with antenna requirements of section 15.203 and 15.204(c).” The EUT meets the FCC antenna requirements, it’s have I-PEX antenna connector that no antenna other than that furnished by the responsible party shall be used with the device. The spurious emissions are shown in the test report. 5, “The modular transmitter must be tested in a stand-alone configuration.” The EUT was tested in a stand-alone configuration to notebook, please see section photographs of test configuration in the test report. 6, “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. 7, “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacture must provide adequate instructions along with module to explain any such requirement.” The EUT is compliant with all applicable FCC rules, detail instructions for maintaining compliance are given in the User Manual. 8, “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF exposure is addressed in the test report. PROWARE TECHNOLOGIES CO., LTD., its wireless Lite-N USB Module, FCC ID： WWMMN421V1, would like to have your authorization as a full modular approval specific to the computer device such as desktop/laptop computer. The requirements of section 15.212 have been met and shown on the following statements. Dear Application Examiner, Best Regards! Modular Approval Request Letter Name of authorized signer: Yongquan Wang Title of authorized signer: Product Dept. Manager Company Name: Proware Technologies Co., Ltd. Tel: 86-755-26502509 Fax: 86-755-26508930 Web site: WWW.PROWARE.COM.CN

PROWARE TECHNOLOGIES CO., LTD. Date: January 7, 2011 Federal Communications Commission Authorization and Evaluation Division FCC ID: WWMMN421V1 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this application as outlined below: 1. Block diagram 2. Schematics 3. Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might to harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the grant for this application. Sincerely, Name of authorized signer: Yongquan Wang Title of authorized signer: Product Dept. Manager Company Name: PROWARE Technologies Co., Ltd. Tel: 86-755-26502509 Fax: 86-755-26508930 Web site: WWW.PROWARE.COM.CN

PROWARE TECHNOLOGIES CO., LTD. Attestation for FCC Declaration of Conformity FCC ID: WWMMN421V1 Date: January 6, 2011 Please be notified that we, the undersigned, Proware Technologies Co., Ltd., declare that the product bears the above FCC ID is also complying with the requirements of FCC DoC. The test report number for FCC DoC is FD991201C20 , which is issued by an accredited lab, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch located at No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang,Taipei Hsien 244, Taiwan. Which has been accredited in accordance to all of the requirements of 47CFR 2.948(d) and (e) of the FCC rules and KDB349827. Sincerely, Name of authorized signer: Yongquan Wang Title of authorized signer: Product Dept. Manager Company Name: PROWARE Technologies Co., Ltd. Tel: 86-755-26502509 Fax: 86-755-26508930 Web site: WWW.PROWARE.COM.CN

12 E D C B A 12 3456789 E D C 345678 B A 9 料号： 设 计 审 核 颜 色 名 称 版 本 材 质 模 具 机型版本号 完成日期 logo 底色 文字 其它 记 录 与上一版的区别 PW-MN421 1.0屏蔽罩标贴 第一版 PW-MN421 1.0 2010-11-11 葛焕丽 80g艾利铜版纸+光膜 黑白印刷 14.5*11mm,0.5R 文 字转曲线 1:1 2 :1 PW-MN421 1 50Mbps W ireless Lite-N USB Module F CC ID:WWMMN421V1

Report No.: SA991201C20 Report Format Version 4.0.0 Reference No.: 991201C22 1 RF EXPOSURE REPORT REPORT NO.: SA991201C20 MODEL NO.: PW-MN421, VNT9271B6050 FCC ID: WWMMN421V1 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: Proware Technologies Co., Ltd. ADDRESS: 2nd F1 East Wing,South Section,Factory Building 24,Science&Technology Park,Shennan Rd,Nanshan District,Shenzhen ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan Report No.: SA991201C20 Report Format Version 4.0.0 Reference No.: 991201C22 2 1. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 3. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 4. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) MAXIMUM ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 18.5 1.93 20 0.022 1.00

Report No.: RF991201C20 R1 1 Report Format Version 4.0.0 Reference No.:991122C10 Cancels and replaces the report No.: RF991201C20 dated Dec. 27, 2010 FCC TEST REPORT REPORT NO.: RF991201C20 R1 MODEL NO.: PW-MN421, VNT9271B6050 FCC ID: WWMMN421V1 RECEIVED: Nov. 22, 2010 TESTED: Dec. 9 ~ 10, 2010 ISSUED: Feb. 14, 2011 APPLICANT: Proware Technologies Co., Ltd. ADDRESS: 2nd F1 East Wing,South Section,Factory Building 24,Science&Technology Park,Shennan Rd,Nanshan District,Shenzhen ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan This test report consists of 73 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF991201C20 R1 2 Report Format Version 4.0.0 Reference No.:991122C10 Cancels and replaces the report No.: RF991201C20 dated Dec. 27, 2010 TABLE OF CONTENTS RELEASE CONTROL RECORD..................................................................................4 1. CERTIFICATION..........................................................................................5 2. SUMMARY OF TEST RESULTS.................................................................6 2.1 MEASUREMENT UNCERTAINTY...............................................................6 3. GENERAL INFORMATION..........................................................................7 3.1 GENERAL DESCRIPTION OF EUT............................................................7 3.2 DESCRIPTION OF TEST MODES..............................................................9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST..........................................9 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL.............10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS............................13 3.4 DESCRIPTION OF SUPPORT UNITS.......................................................13 4. TEST TYPES AND RESULTS....................................................................14 4.1 CONDUCTED EMISSION MEASUREMENT.............................................14 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT..........................14 4.1.2 TEST INSTRUMENTS...............................................................................14 4.1.3 TEST PROCEDURES...............................................................................15 4.1.4 DEVIATION FROM TEST STANDARD......................................................15 4.1.5 TEST SETUP.............................................................................................16 4.1.6 EUT OPERATING CONDITIONS...............................................................16 4.1.7 TEST RESULTS........................................................................................17 4.2 RADIATED EMISSION MEASUREMENT..................................................19 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...............................19 4.2.2 TEST INSTRUMENTS...............................................................................20 4.2.3 TEST PROCEDURES...............................................................................21 4.2.4 DEVIATION FROM TEST STANDARD......................................................21 4.2.5 TEST SETUP.............................................................................................22 4.2.6 EUT OPERATING CONDITIONS...............................................................22 4.2.7 TEST RESULTS........................................................................................23 4.3 6dB BANDWIDTH MEASUREMENT.........................................................36 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT.......................................36 4.3.2 TEST INSTRUMENTS...............................................................................36 4.3.3 TEST PROCEDURE..................................................................................36 4.3.4 DEVIATION FROM TEST STANDARD......................................................36 4.3.5 TEST SETUP.............................................................................................37 4.3.6 EUT OPERATING CONDITIONS...............................................................37 4.3.7 TEST RESULTS........................................................................................38 4.4 MAXIMUM OUTPUT POWER...................................................................42 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT..........42 4.4.2 INSTRUMENTS.........................................................................................42 4.4.3 TEST PROCEDURES...............................................................................42 4.4.4 DEVIATION FROM TEST STANDARD......................................................43 4.4.5 TEST SETUP.............................................................................................43 Report No.: RF991201C20 R1 3 Report Format Version 4.0.0 Reference No.:991122C10 Cancels and replaces the report No.: RF991201C20 dated Dec. 27, 2010 4.4.6 EUT OPERATING CONDITIONS...............................................................43 4.4.7 TEST RESULTS........................................................................................44 4.5 POWER SPECTRAL DENSITY MEASUREMENT....................................46 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT..................46 4.5.2 TEST INSTRUMENTS...............................................................................46 4.5.3 TEST PROCEDURE..................................................................................46 4.5.4 DEVIATION FROM TEST STANDARD.........................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 3 RADIATED EMISSION TEST 4