X280066Jongo S340B

1 ES FR ENGLISH Thank you for choosing Jongo S340B. This manual will get you up and running in no time, and explains how to make the most of your Jongo. We’re constantly improving and adding new features to our products. To take advantage of any enhancements made since your product was shipped, please visit www.pure.com where you can check for any updated versions of software and download the latest version of this user guide in PDF format. 2 Jongo Safety Instructions 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5. Clean only with dry cloth. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 7. Only use attachments/accessories specified by the manufacturer. 8. Unplug the apparatus during lightning storms or when unused for long periods of time. 9. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, does not operate normally, or has been dropped. 10. To reduce the risk of electric shock, do not Remove plastic cover or screws as there are no user- serviceable parts inside. Refer servicing to qualified personnel. 11 Avoid liquids getting into Jongo. Should not be immersed in water, or used where this may happen, such as a bathroom. 12. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. 13. WARNING Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. 14. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 15. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 16. WARNING: The direct plug-in adapter is used as disconnect device, the disconnect device shall remain readily operable. 17. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 18. Separation distance of at least 20cm must be maintained between the antenna of the product and all persons. 19. The power rating marking is located on the base of the main unit. ChargePAK F1 Safety Instructions 1. Read the instructions for ChargePAK use in this document. 2. Only use your ChargePAK with original Pure products. 3. Store ChargePAK in a cool, dry place at normal room temperature. Remove from devices that will be stored unused for extended periods. 4. Do not puncture, modify, drop, throw, or cause other unnecessary shocks to your ChargePAK. May present a risk of fire, explosion, or chemical burn if mistreated. 5. Do not dispose of ChargePAK in a fire or incinerator, or leave in hot places such as a motor car under direct sunlight. Do not store near oven, stove, or other heat source. 6. Do not connect ChargePAK directly to an electrical source, such as a building outlet or automobile power-point. Do not place into a microwave oven, or any other high-pressure container. 7. Do not immerse ChargePAK in water or otherwise expose it to liquids. 8. Do not short circuit ChargePAK. 9. Do not use or charge a ChargePAK that appears to be leaking, discolored, rusty, deformed; emitting an odor; or is otherwise abnormal. 10. Do not touch a leaking ChargePAK directly; wear protective material to remove and dispose of it properly immediately. 11. Do not store where children may have access. 12. Dispose of ChargePAK as per normal rechargeable batteries according to the local laws and regulations of your region. Some batteries may be recycled, and may be accepted for disposal at your local recycling center. 3 EN Contents 4 Getting started 4 Introduction 5 Front panel controls 6 Rear panel controls and connectors 7 Symbols on the rear display 8 Switching between Sleep, On and Off 8 Power light states 8 Network setup 9 Preparing Jongo to connect to a wireless network 10 Connecting Jongo to your wireless network using Push Button Configuration 10 Manually connecting Jongo to your wireless network 10 Stage 1: Connecting your setup device to Jongo 11 Stage 2: Accessing Jongo Setup Manager 12 Stage 3: Adding Jongo to your wireless network 13 Streaming from a smartphone or tablet 13 Streaming from a Pure wireless music and radio system 14 Using Bluetooth 14 Using the auxiliary input 15 Changing audio profiles 16 Using Jongo Setup Manager 19 Replacing the ChargePAK F1 20 Technical specifications 4 Getting started Introduction Jongo S340B is a Wi-Fi/Bluetooth speaker that can be placed wherever you like thanks to its built-in rechargeable battery pack. Once connected to your Wi-Fi network you can enjoy synchronised music, radio and much more, streamed from your smartphone, tablet or compatible Pure products. For more casual audio streaming, you can also use Bluetooth to stream one-to-one from a huge range of mobile devices. Jongo S340B is part of the Pure Jongo system. The Pure Jongo system lets you start with a single Jongo S340B and expand within a single room, or across multiple rooms, by adding more devices. You can control all the devices using the Pure Connect app on your iPad, iPhone or Android device, or by using a compatible Pure music streaming and…

Text truncated - open the document above for the full version.

B2 1 2 3 4 5 6 7 8 9 10 11 12 131415161718192021222324 484746454443424140393837 36 35 34 33 32 31 30 29 28 27 26 25 V CCLNA B6 GNDRXLNA ANT1+ ANT1- B7 V CCPA ANT2+ ANT2- SHDN POWER DETECTOR SERIAL INTERFACE TEMP SENSOR AM DETECTOR V CCTXPA B5 CS RSSI V CCTXMX SCLK DIN V CCPLL CLOCKOUT LD B1 CPOUT RXBBQ+ RXBBQ- RX Q OUTPUTS RX/TX GAIN CONTROL B4 BYPASS TUNE GNDVCO CTUNE V CCVCO XTAL PLL %1,2 %1,2 GNDCP SERIAL INPUTS V CCXTAL V CCCP RXTX ANTSEL V CCRXMX TXBBI+ TXBBI- TXBBQ+ TXBBQ- V CCRXFL RXHP V CCRXVGA RXBBI+ RXBBI- MAX2830 MODE CONTROL RX/TX GAIN CONTROL RX/TX GAIN CONTROL REFERENCE CLOCK BUFFER OUTPUT NOTE: ALL GROUND PINS (PINS 2, 26, AND 31) AND BYPASS CAPACITORS’ GROUND REQUIRE THEIR OWN VIAS TO GROUND. DO NOT CONNECT THEM TO THE EXPOSED PADDLE GROUND. RX BASEBAND HPF CORNER FREQUENCY CONTROL B3 RX/TX GAIN CONTROL RX INPUT TX OUTPUT MODE CONTROL RX/TX GAIN CONTROL RX/TX GAIN CONTROL RX GAIN CONTROL TX INPUTRX I OUTPUTS 0° 90° RSSI MUX TO RSSI MUX RSSI TEMP SENSOR CRYSTAL OSCILLATOR/ BUFFER RSSI TO RSSI MUX MUX IMUX QMUX MUX Rx/Tx ANTENNA SWITCH Block Diagram/Typical Operating Circuit 18Maxim Integrated 2.4GHz to 2.5GHz 802.11g/b RF Transceiver, PA, and Rx/Tx/Antenna Diversity Switch MAX2830

022311 – 6 Request for Confidentiality Date: __ 25th October 2013 ______ Subject: Confidentiality Request for: _____X28006 6 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 3 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual Imagination Technologies Ltd / Pure Digital has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: Not applicable. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely,

Pure Jongo S340B – external photos V1 29-Jan-13 Front View Back view Side (speaker covers on) Side (speaker covers removed) Battery cover removed Top Bottom

Name Oregano Base silkscreen Part # 14U67 Version 5 Date 09/11/2012 Pantone 877C Pantone Cool Grey 10C Black PlasticsWhite Plastics Silkscreen Colour Reserved for serial number 40mm x 8mm

Pure Jongo S340B – internal photos V1 29-Jan-13 Internal view (speakers opened from the main unit) Main PCB top (with screening can) Main PCB top (without screening can) Main PCB bottom (with screening can) Main PCB bottom (without screening can) Auxiliary in PCB Top Auxiliary in PCB Bottom LCD PCB Top LCD PCB Bottom Button PCBs Volume Buttons PCB Top Volume Buttons PCB Bottom Power Button PCB Top Power Button PCB Bottom

Jongo S340B RF Exposure:- The Jongo S340B is intended as a mobile device. A warning statement is included in the user manual advising users to maintain a minimum distance of 20cm. Evaluation is therefore for exposure potential against the MPE limits given in Appendix A of OET Bulletin 65, Supplement C: 1500-100,000MHz; 1mW/cm 2 Compliance requirements are based upon General population / Uncontrolled exposure. Equation (3) of OET Bulletin 65: where: S = power density (in appropriate units, e.g. mW/cm 2 ) P = power input to the antenna (in appropriate units, e.g. mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna (appropriate units, e.g. cm) Substituting known values for the Jongo S340B: WiFi RF worst case average power, P = 34mW (+15.3dBm). WiFi antenna gain (measured), G = -0.5 dB. n.b. although the specified gain for the chip antenna is 0dBi, this is the best gain (Middle channel gain) measured in practice. Distance, R = 20cm (for mobile use). S = 0.006 < 1mW/cm 2 The Jongo S340B may also be fitted with a pre-approved FCC Bluetooth USB dongle, which would therefore be co-located. Maximum power of all Bluetooth devices is 100mW eirp. The maximum MPE is therefore as follows. Equation (3) of OET Bulletin 65: where: S = power density (in appropriate units, e.g. mW/cm 2 ) P = power input to the antenna (in appropriate units, e.g. mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna (appropriate units, e.g. cm) Bluetooth worst case average power, P = 100mW Bluetooth antenna gain (maximum with above power is unity), G = 1 Distance, R = 20cm (for mobile use). S = 0.02 < 1mW/cm 2 For co-location we can compare both items to the limit and sum the percentage of limit to check 100% not exceeded : 0.02/1 + 0.006/1 = 2.6% limit < 100%

FCC 47CFR part 15C Test Report For JongoS340B Reference Standard: FCC 47CFR part 15C Manufacturer: PURE For type of equipment and serial number, refer to section 3 Report Number: 11-6525-5-12 Issue 01 Report Produced by: -R.N. Electronics Ltd. 1 Arnolds Court Arnolds Farm Lane Mountnessing Essex CM13 1UT U.K. www.RNelectronics.comTelephone +44 (0) 1277 352219 Facsimile +44 (0) 1277 352968 electronics R N 2012RN ELECTRONICS LIMITEDREPORT NUMBER 11-6525-5-12 ISSUE 01 ALL RIGHTS RESERVED File namePURE.6525-5.DOCM The contents of this report, apart from the referenced ANSI C63.4-2003, are beyond the scope of UKAS Testing Laboratory No. 2360 accreditation. QMF21J – 3; 47CFR15.247, RNE ISSUE 01 SEP 2012PAGE 2 OF 141 Copy No. pdf Arnolds Court, Arnolds Farm Lane, Mountnessing, Brentwood Essex, CM13 1UT Certificate of Test 6525/5 The unit noted below has been tested byR.N. Electronics Limitedand, where appropriate, conforms to the relevant subpart of FCC 47CFR Part 15. This is a certificate of test only and should not be confused with an equipment authorisation. Other standards may also apply. Equipment:Jongo S340B Model Number:JongoS340B Proposed FCC ID:X280066 Unique Serial Number:ES3-03 Manufacturer:PURE Home Park Industrial Estate Kings Langley Hertfordshire WD4 8LZ UK Full measurement results are detailed in Report Number:11-6525-5-12 Issue 01 Test Standards:FCC 47CFR Part 15.247 Effective dateOctober 1 st 2012, Class DTS Intentional Radiator NOTE: Certain tests were not performed based upon manufacturer's declarations. Certain other requirements are subject to manufacturer declaration only and have not been tested/verified. For details refer to section 3 of this report. DEVIATIONS: Deviations from the standards have been applied. For details refer to section 4.2 of this report. This certificate relates only to the unit tested as identified by a unique serial number and in the condition at the time it was tested. It does not relate to any other similar equipment and performance of the product before or after the test cannot be guaranteed. Whilst every effort is made to assure quality of testing, type tests are not exhaustive and although no non-conformances may be found, this doesn't exclude the possibility of unit not meeting the intentions of the standard or the requirements of the Directive, particularly under different conditions to those during testing. Any compliance statements are made reliant on (a) the application of the product and use of the assigned band being acceptable to one or more national authorities within the EU and (b) the modes of operation as instructed to us by the Customer based on their specific knowledge of the application and functionality of the EUT. Statements of compliance, where measurements were made, do not include the measurement uncertainty. The measurement uncertainty, where stated, is the expanded uncertainty based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95%. Date of Test:22 nd October to26 th November 2012 Test Engineer: Approved By: Managing Director Customer representative electronics RN 2012RN ELECTRONICS LIMITEDREPORT NUMBER 11-6525-5-12 ISSUE 01 ALL RIGHTS RESERVED File namePURE.6525-5.DOCM The contents of this report, apart from the referenced ANSI C63.4-2003, are beyond the scope of UKAS Testing Laboratory No. 2360 accreditation. QMF21J – 3; 47CFR15.247, RNE ISSUE 01 SEP 2012PAGE 3 OF 141 1 Contents 1Contents..............................................................................................................3 2Summary of test results .......................................................................................4 3Equipment Under Test (EUT) ..............................................................................5 3.1EQUIPMENTSPECIFICATION.......................................................................................................... 5 3.2EUTCONFIGURATIONS FOR TESTING........................................................................................... 5 3.3FUNCTIONALDESCRIPTION............................................................................................................ 6 3.4EUTMODES.................................................................................................................................. 6 3.5EMISSIONSCONFIGURATION......................................................................................................... 7 4Specifications......................................................................................................8 4.1RELEVANTSTANDARDS................................................................................................................. 8 4.2DEVIATIONS.................................................................................................................................... 8 4.3MEASUREMENTUNCERTAINTIES................................................................................................... 8 5Tests, Methods and Results ................................................................................9 5.1CONDUCTED EMISSIONS................................................................................................................ 9 5.2PEAKCONDUCTED POWER..........................................................................................................11 5.3MAXIMUMPOWERSPECTRALDENSITY.......................................................................................13 5.4DUTY CYCLE.................................................................................................................................15 5.5RADIATED EMISSIONS..................................................................................................................16 5.6OCCUPIED BANDWIDTH................................................................................................................19 5.7BANDEDGECOMPLIANCE..................................…

Text truncated - open the document above for the full version.

1 Photographs Radiated emissions <30MHz Radiated emissions 30-1000MHz Radiated emissions above 1000MHz AC conducted emissions