X4K-CCW03103Wall-mounted wireless transmitter (wall console).

COMMERCIAL DOOR OPERATOR DAVE’s Manual Doc # 160948_01 Released: February 2, 2026 2 DAVE Commercial Door Operator — Instructional Manual Contents 1. IMPORTANT SAFETY INSTRUCTIONS 4 2. PRODUCT DETAILS 8 Technical Specifications 9 Mounting Hardware Explained 17 3. CONFIGURING OPERATOR DRIVE SHAFT & HANDING 19 Drive Shaft 20 Manual Hauling Chain 21 4. INSTALLATION 22 Get a Load of DAVE’s Flexibility! 24 Installation Setup Options 25 Step by Step Installation Sequence 26 Drive Unit 30 Wall Console 35 Warning Placards 39 5. CONNECTING TO POWER 40 OmniVolt® Power Cartridge Details 42 Connecting OmniVolt® Power Cartridge 43 6. WIRING DETAIL 44 Main Control Board Overview 45 Main Control Board Terminals 46 3 DAVE Commercial Door Operator — Instructional Manual 7. SETUP & PROGRAMMING OPTIONS 48 Pairing Wall Console 49 Wall Console Power Modes 51 Using Remote Controls (Transmitters) 52 Setting Limits 56 Operator Settings 58 Resetting to Factory Defaults 59 Programming Options Table 62 8. SAFETY DEVICES AND OTHER CONTROL INPUTS 71 Safety Device Setup 72 Fire System Input 77 Access Devices 79 9. DAVE’S RELAY EXPANSION BOARD 82 Relay Expansion Board Overview 83 Relay Board Wiring Examples 84 10. MAINTENANCE & SUPPORT 86 Door Service Alerts 87 Maintenance Requirements 89 Troubleshooting Guide 91 4 DAVE Commercial Door Operator — Instructional Manual 1. IMPORTANT SAFETY INSTRUCTIONS 5 DAVE Commercial Door Operator — Instructional Manual WARNING TO REDUCE THE RISK OF SEVERE INJURY OR DEATH: 1. READ AND FOLLOW ALL INSTRUCTIONS. 2. Never let children operate or play with door controls. Keep remote controls away from children. 3. Always keep the moving door in sight and away from people and objects until it is completely closed. NO ONE SHOULD CROSS THE PATH OF THE MOVING DOOR. 4. NEVER GO UNDER A STOPPED, PARTIALLY OPEN DOOR. 5. Test door operator monthly. After adjusting either the force or the limit of travel, retest the door opener. Failure to properly adjust the opener increases the risk of severe injury or death. 6. For products having an emergency release, use the emergency release only when the door is closed, if possible. Use caution when using this release with the door open. Weak or broken springs can accelerate the door downward, causing severe injury or death. 7. KEEP OVERHEAD DOORS AND SHUTTERS PROPERLY BALANCED. See user’s manual. An improperly balanced door increases the risk of severe injury or death. A qualified service person must make repairs to cables, spring assemblies, and other hardware . 8. For operator systems equipped with an unattended or automatic closing feature, the following statement shall be posted adjacent to the wall control in accordance with UL 325: “This operator has an unattended operation feature. No one should cross the path of the moving door.” 9. SAVE THESE INSTRUCTIONS. AVERTISSEMENT POUR RÉDUIRE LE RISQUE DE BLESSURES GRAVES, VOIRE DE MORT : 1. LISEZ ET SUIVEZ TOUTES LES INSTRUCTIONS. 2. Ne laissez jamais les enfants utiliser ou jouer avec les commandes de la porte. Gardez les télécommandes hors de portée des enfants. 3. Gardez toujours la porte en mouvement dans votre ligne de vision et à l’écart des personnes et des objets jusqu’à ce qu’elle soit complètement fermée. PERSONNE NE DOIT TRAVERSER LA TRAJECTOIRE DE LA PORTE EN MOUVEMENT. 4. NE PAS PASSER SOUS UNE PORTE ARRÊTÉE OU PARTIELLEMENT OUVERTE. 5. Testez l’ouvre‐porte chaque mois. La porte de garage DOIT inverser sa course au contact d’un objet de 38 mm (1‐1/2 po) ou d’une planche de 2 x 4 posée à plat sur le sol. Après avoir réglé la force ou la limite de course, refaites le test de l’ouvre‐porte. Le fait de ne pas régler correctement l’ouvre‐porte augmente le risque de blessures graves ou de mort. 6. Pour les produits équipés d’un déverrouillage d’urgence, utilisez ce dispositif uniquement lorsque la porte est fermée, si possible. Faites preuve de prudence lors de l’utilisation de ce dispositif lorsque la porte est ouverte. Des ressorts faibles ou cassés peuvent accélérer la descente de la porte, causant des blessures graves ou la mort. 7. GARDEZ LES PORTES BASCULANTES ET LES VOLETS ROULANTS CORRECTEMENT ÉQUILIBRÉS. Voir le manuel d’utilisation. Une porte mal équilibrée augmente le risque de blessures graves ou de mort. Un technicien qualifié doit effectuer les réparations des câbles, des ensembles de ressorts et des autres composants. 8. Pour les systèmes d’opérateur équipés d’une fonction de fermeture automatique ou sans surveillance, l’avertissement suivant doit être affiché à côté du bouton mural conformément à la norme UL 325 : 9. « Cet opérateur est doté d’une fonction de fonctionnement sans surveillance. Personne ne doit traverser la trajectoire de la porte en mouvement. » 10. Conservez ces instructions. 6 DAVE Commercial Door Operator — Instructional Manual PLEASE READ THESE IMPORTANT SAFETY RULES CAREFULLY These safety alert symbols indicate a personal safety or property damage instruction exists. This automatic door operator is designed and tested to offer safe service provided it is installed and operated in strict accordance with the following safety rules. Failure to comply with the installation instructions and the safety warnings may result in death, serious personal injury and/or property damage. WARNING • The door may operate unexpectedly, therefore do not allow Anything to stay in the path of the door. • For SAFETY protection, a Safety Beam must be fitted with logic console. Failure to comply will void the warranty and may result in serious personal injury and/or property damage . • The drive must not be used with a door incorporating a wicket door, unless the drive cannot be operated with the wicket door open. The drive is intended to be installed at least 2.5m above the floor. • DO NOT allow children to operate the opener. Any device that can operate the opener, make sure it is out of reach of children and that the doorway is in full view at all times. Serious personal injury and/or p…

Text truncated - open the document above for the full version.

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03/25/2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: X4K-CCW03103 Automatic Technology Australia Pty Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Nikolai Klepikov Senior Electronics Design Engineer

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03/25/2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: X4K-CCW03103 Automatic Technology Australia Pty Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Automatic Technology Australia Pty Ltd (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. Or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Nikolai Klepikov Senior Electronics Design Engineer

Federal Communications Commission Authorization and Evaluation Division Date: 03/13/2026 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: X4K-CCW03103 Automatic Technology (Australia) Pty Ltd (“the applicant”) certifies that, as of the date of the filing of the application, Automatic Technology America LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Automatic Technology (Australia) Pty Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Automatic Technology America LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process f or the above referenced FCC ID. Designated U.S. Agent Information: Name: Address: Automatic Technology America LLC 28610 Hwy 290 - Suite F09-345, Cypress, TX 77433 Contact Person: Corrado Boschetto Tel.: (737) 262-5035 Email: [email protected] Sincerely, Automatic Technology (Australia) Pty Ltd Automatic Technology America LLC Nikolai Klepikov Corrado Boschetto FCC FRN: 0019477462 The agent for service of process does no other business with the FCC and does not have an FRN.

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03/13/2026 SUBJECT: FCC Application for FCC ID: X4K-CCW03103 To Whom It May Concern: Nikolai Klepikov of Automatic Technology Australia Pty Ltd (“the applicant”), hereby authorize Ian Paul Ng at EMC Technologies Pty Ltd to act on our behalf, to apply to the Federal Communications Commission for FCC approval of our equipment. Any and all acts carried out by Ian Paul Ng at EMC Technologies on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Nikolai Klepikov Senior Electronics Design Engineer

Federal Communications Commission Authorization and Evaluation Division Date: February 4, 2026 Subject: FCC Application for FCC ID: X4K-CCW03103 - Confidentiality Request. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram CONF_WC-100v1_Blkdia.pdf Schematics CONF_WC-100v1_Schem.pdf Operational Description CONF_WC-100v1_OpDes.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Nikolai Klepikov Senior Electronics Design Engineer

EMC Technologies Pty. Ltd. ABN 82 057 105 549 Melbourne 176 Harrick Road Keilor Park, Vic 3042 Tel: +61 3 9365 1000 Sydney Unit 3/87 Station Road Seven Hills, NSW 2147 Tel: +61 2 9624 2777 Email: [email protected] Web: www.emctech.com.au EMC Technologies Pty Ltd, 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au To Federal Communications Commission Attention: Certification Officer EMCT Ref: M2508020 Date: March 24, 2026 Subject: Automatic Technology Australia original filing (FCC ID:X4K-CCW03103) Product Name: Wall Console Model: WC-100v1 Radio: Transmitter – 3 channels: 433.47, 433.92, 434.37 Modulation: FSK-OOK Antenna: PCB Loop antenna Description: Wall-mounted wireless transmitter (wall console) that controls the DAVE door/gate operator. Please Note: Permanent Confidentiality: Application includes request for permanent confidentiality – Schematics. Block Diagram, Operational Description Agent: EMC Technologies is acting as agent for Automatic Technologies Australia in this application. Regards _____________ Ian Paul Ng Senior Test Engineer EMC Technologies Pty Ltd 176 Harrick Road, Keilor Park, VIC 3042 Australia Ph: +61 3 9365 1000 www.emctech.com.au

Page 1 of 4 EMC ENGINEERS & LABORATORIES EMC Bayswater Pty Ltd 18/88 Merrindale Drive Croydon South, Victoria, 3136, Australia Telephone: +61 3 9761 5888 Facsimile: +61 3 8761 6547 Email: [email protected] ABN: 49 112 221 333 Photograph Annex A: External - EUT Photographs Automatic Technology Australia Pty. Ltd. WC-100v1 DAVE (Industrial/commercial doors/gates operator) – Wall Console REPORT: E2506-1852-2 Annex A DATE: September, 2025 EMC Bayswater Test Report E2506-1852-2 Annex A Page 2 of 4 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photographs Number Photograph Description 1 EUT – External Views 2 3 4 5 6 7 8 9 EMC Bayswater Test Report E2506-1852-2 Annex A Page 3 of 4 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photograph 1 Photograph 2 Photograph 3 Photograph 4 Photograph 5 Photograph 6 EMC Bayswater Test Report E2506-1852-2 Annex A Page 4 of 4 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photograph 7 Photograph 8 Photograph 9

6-8 FIVEWAYS BOULEVARD, KEYSBOROUGH, VIC, 3173, AUSTRALIA PHONE: +61(0) 3 9791 0200 FAX: +61(0) 3 9791 0250 WEB: www.ata-aust.com.au Automatic Technology Australia Pty Ltd. 6 5 4 1 23 A D C B TBA SHEET DOCUMENT NO. A4 PART NO. SCALE: WALL CONSOLE ID LABEL TITLE: GENERAL TOLERANCES: DECIMAL: 0.X 0.1 0.XX 0.05 ANGLE: 0.5 RADIUS: 0.5 CHAMFER: 0.5 x 45 SURFACE FINISH DESCRIPTION PROPRIETARY AND CONFIDENTIAL J.BUTLER 26.03.2026 DATE NAME 1 : 1 QTY MAT'L REMARKS NOTE: BLACK BACKGROUND ALL TEXT IS WHITE R 1 9495MP ADHESIVE BACKING LEXAN 8B35 0.18THK 40 mm +0-0.1 60 mm +0-0.1 162147_00 Made in China Automatic Technology Australia Pty Ltd Wall Console This device complies with Part 15 of the FCC Rules and ISED Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WC - 100v1 MODEL: CONTAINS: FCC ID: 2ABU6 - MS88SF2 CONTAINS: IC ID: 20896 - MS88SF2 FCC ID: X4K - CCW03103 IC ID: 8880A - CCW03103 Made in China Made in China Automatic Technology Australia Pty Ltd Wall Console This device complies with Part 15 of the FCC Rules and ISED Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WC - 100v1 MODEL: CONTAINS: FCC ID: 2ABU6 - MS88SF2 CONTAINS: IC ID: 20896 - MS88SF2 FCC ID: X4K - CCW03103 IC ID: 8880A - CCW03103

Page 1 of 6 EMC ENGINEERS & LABORATORIES EMC Bayswater Pty Ltd 18/88 Merrindale Drive Croydon South, Victoria, 3136, Australia Telephone: +61 3 9761 5888 Facsimile: +61 3 8761 6547 Email: [email protected] ABN: 49 112 221 333 Photograph Annex B: Internal - EUT Photographs Automatic Technology Australia Pty. Ltd. WC-100v1 DAVE (Industrial/commercial doors/gates operator) – Wall Console REPORT: E2506-1852-2 Annex B DATE: September, 2025 EMC Bayswater Test Report E2506-1852-2 Annex B Page 2 of 6 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photographs Number Photograph Description 1 EUT – Internal Views 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 EMC Bayswater Test Report E2506-1852-2 Annex B Page 3 of 6 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photograph 1 Photograph 2 Photograph 3 Photograph 4 Photograph 5 Photograph 6 EMC Bayswater Test Report E2506-1852-2 Annex B Page 4 of 6 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photograph 7 Photograph 8 Photograph 9 Photograph 10 Photograph 11 Photograph 12 EMC Bayswater Test Report E2506-1852-2 Annex B Page 5 of 6 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photograph 13 Photograph 14 Photograph 15 Photograph 16 Photograph 17 Photograph 18 EMC Bayswater Test Report E2506-1852-2 Annex B Page 6 of 6 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photograph 19 Photograph 20 Photograph 21 Photograph 22 Photograph 23

Page 1 of 8 EMC ENGINEERS & LABORATORIES EMC Bayswater Pty Ltd 18/88 Merrindale Drive Croydon South, Victoria, 3136, Australia Telephone: +61 3 9761 5888 Facsimile: +61 3 8761 6547 Email: [email protected] ABN: 49 112 221 333 RF Radiation Exposure Evaluation In accordance with: FCC KDB 447498 D01 v06 Automatic Technology Australia Pty. Ltd. WC-100v1 DAVE (Industrial/commercial doors/gates operator) – Wall Console FCC ID: X4K-CCW03103 REPORT: E2506-1852-3 DATE: September, 2025 EMC Bayswater Test Report E2506-1852-3 Page 2 of 8 Prepared by: Approved by: 11/09/2025 14:17 Adnan Zaman (EMC Test Engineer) Neville Liyanapatabendige (Manager) Date This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. RF Radiation Exposure Evaluation Report EMC Bayswater Test Report: E2506-1852-3 Issue Date: September, 2025 Product: DAVE (Industrial/commercial doors/gates operator) – Wall Console Model No: WC-100v1 Serial No: Not stated FCC ID: X4K-CCW03103 Customer Details: Mr. Nikolai Klepikov Automatic Technology Australia Pty. Ltd. 6 – 8 Fiveways Boulevard Keysborough Victoria 3173, Australia Phone No: +61 3 9795 0275 e-mail: [email protected] Standard(s): FCC KDB 447498 D01 v06 RF EXPOSURE PROCEDURES AND EQUIPMENT AUTHORIZATION POLICIES FOR MOBILE AND PORTABLE DEVICES CFR47 FCC Part 2, Subpart J, 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. CFR47 FCC Part 2, Subpart J, 2.1093 Radiofrequency radiation exposure evaluation: portable devices. Results Summary: RF Radiation exposure requirements Complied Test Date(s): 21 st August, 2025 Test House (Issued By): EMC Bayswater Pty Ltd 18/88 Merrindale Drive Croydon South, Victoria, 3136, Australia FCC Accredited Test Firm Registration number: 527798 FCC Accredited Test Firm Designation number: AU0004 Phone No: +61 3 9761 5888 Email: [email protected] Fax: +61 3 8761 6547 Web: www.emcbayswater.com.au The Automatic Technology Australia Pty. Ltd., WC-100v1, DAVE (Industrial/commercial doors/gates operator) – Wall Console, measured EIRP is below the SAR exception threshold (5mm distance) and the calculated power density level at a distance of 20cm are below the maximum levels allowed by regulations therefore complied with the requirements of CFR47 FCC Part 2, Subpart J, 2.1091. This is to certify that the necessary evaluations were made by EMC Bayswater Pty Ltd, and that the Automatic Technology Australia Pty. Ltd., WC-100v1, DAVE (Industrial/commercial doors/gates operator) – Wall Console, has been tested in accordance with requirements contained in the appropriate commission regulations. EMC Bayswater Test Report E2506-1852-3 Page 3 of 8 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. RF Radiation Exposure Evaluation for Automatic Technology Australia Pty. Ltd. Contents 1. Introduction ................................................................................................................... 4 2. Test Report Revision History ........................................................................................ 4 3. Report Information ........................................................................................................ 4 4. Product Details .............................................................................................................. 5 4.1. Product Sample Details ........................................................................................... 5 4.2. Product description .................................................................................................. 5 5. SAR and RF Exposure exception evaluation ............................................................... 6 5.1. SAR exception evaluation ........................................................................................ 6 5.2. RF Exposure Evaluation (MPE) ............................................................................... 7 6. Conclusion ..................................................................................................................... 8 EMC Bayswater Test Report E2506-1852-3 Page 4 of 8 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. 1. Introduction RF Radiation Exposure evaluation was performed on a Automatic Technology Australia Pty. Ltd., WC-100v1, DAVE (Industrial/commercial doors/gates operator) – Wall Console in accordance with CFR47 FCC Part 2, Subpart J, 2.1091. 2. Test Report Revision History None 3. Report Information EMC Bayswater Pty Ltd reports apply only to the specific samples tested under the stated test conditions. All samples tested were in good operating condition throughout the entire test program unless otherwise stated. EMC Bayswater Pty Ltd does not in any way guarantees the later performance of the product/equipment. It is the manufacturer's responsibility to ensure that additional production units of the tested model are manufactured with identical electrical and mechanical components. EMC Bayswater Pty Ltd shall have no liability for any deductions, inference or generalisations drawn by the clients or others from EMC Bayswater Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Bayswater Pty Ltd. This report shall not be reproduced except in full, without the written approval of EMC Bayswater Pty Ltd. This document may be altered or revised by EMC Bayswater Pty Ltd personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by EMC Bayswater Pty Ltd will nullify the document. EMC Bayswater Test Report E2506-1852-3 Page 5 of 8 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. 4. Product Details 4.1. Product Sample Details The device, as supplied by the client, is described as follows: Product: DAVE (…

Text truncated - open the document above for the full version.

A utomatic Technology (Australia) Pty Ltd 6- 8 Fiveways Boulevard, Keysborough, VIC 3173 T +61 3 9791 0200 F +61 3 9791 0250 www.ata-aust.com.au ABN : 11 007 125 368 Date: 13/12/2024 Antenna information 1.A ntenna view. 2.Antenna type. PCB Loop Antenna. 3.Antenna parameters. Frequenc y f₀ = 433.92 MHz Operating frequency range: 433 MHz to 435 MHz Antenna gain*: from -15.5 dBi to -16.5 dBi Input return loss at 433 MHz: from -9.2 dB *Antenna gain information is not required as compliance details were measured in radiated mode and therefore antenna characteristics are inherent to the measurement gain.

Page 1 of 34 EMC ENGINEERS & LABORATORIES EMC Bayswater Pty Ltd 18/88 Merrindale Drive Croydon South, Victoria, 3136, Australia Telephone: +61 3 9761 5888 Facsimile: +61 3 8761 6547 Email: [email protected] ABN: 49 112 221 333 CO-LOCATION VERIFICATION REPORT In accordance with: CFR47 FCC Part 15, Subpart C, 15.209 RSS-Gen - Issue 5, April 2018 including Amendment 1 (March 2019) and Amendment 2 (February 2021) Automatic Technology Australia Pty. Ltd. WC-100v1 DAVE (Industrial/commercial doors/gates operator) – Wall Console REPORT: E2506-1852-7 DATE: September, 2025 Accreditation Number: 18553 Accredited for compliance with ISO/IEC 17025 – Testing The results of the tests, calibrations and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document may not be reproduced except in full without approval from EMC Bayswater, with the exception of the certificate on page 2. EMC Bayswater Test Report E2506-1852-7 Page 2 of 34 Prepared and tested by: Approved by: 11/09/2025 14:22 Adnan Zaman (EMC Test Engineer) Neville Liyanapatabendige (Manager) Date Accreditation number: 18553. The results of the tests, calibrations and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document may not be reproduced except in full without approval from EMC Bayswater, with the exception of the certificate on page 2. Certificate of Verification EMC Bayswater Test Report: E2506-1852-7 Issue Date: September, 2025 Product(s): DAVE (Industrial/commercial doors/gates operator) – Wall Console Model No: WC-100v1 Serial No: Not stated Variant(s): No variant declared FCC ID: X4K-CCW03103 IC ID: 8880A- CCW03103 Customer Details: Mr. Nikolai Klepikov Automatic Technology Australia Pty. Ltd. 6 – 8 Fiveways Boulevard Keysborough Victoria 3173 Australia Phone No: +61 3 9795 0275 e-mail: [email protected] Test Specification: CFR47 FCC Part 15, Subpart C, 15.209 RSS-Gen - Issue 5, April 2018 including Amendment 1 (March 2019) and Amendment 2 (February 2021) Results Summary: FCC 15.209 – Radiated emissions Complied RSS-Gen 8.9 - Unwanted emissions Complied FCC 15.207/ RSS-Gen 7.2 – Conducted Emissions N/A #1 #1 DC powered device only. Does not connect to AC mains Note: Customer requested to perform only the above listed tests for verification. No other tests were performed. Test Date(s): 10 th to 16 th July,2025 Test House (Issued By): EMC Bayswater Pty Ltd 18/88 Merrindale Drive, Croydon South, Victoria, 3136, Australia Telephone: +61 3 9761 5888 Email: [email protected] Facsimile: +61 3 8761 6547 Web: www.emcbayswater.com.au The Automatic Technology Australia Pty. Ltd., WC-100v1 (Serial No: Not stated), DAVE (Industrial/commercial doors/gates operator) – Wall Console, complied with the tested requirements of CFR47 FCC Part 15, Subpart C, 15.209 and RSS-Gen - Issue 5, April 2018 including Amendment 1 (March 2019) and Amendment 2 (February 2021), when tested in the supplied configuration. EMC Bayswater Test Report E2506-1852-7 Page 3 of 34 Accreditation number: 18553. The results of the tests, calibrations and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document may not be reproduced except in full without approval from EMC Bayswater, with the exception of the certificate on page 2. Radio Co-Location Verification Report for Automatic Technology Australia Pty. Ltd. Contents 1. Introduction ................................................................................................................... 4 2. Test Report Revision History ........................................................................................ 4 3. Report Information ........................................................................................................ 4 4. Summary of Results ...................................................................................................... 4 5. Product Sample, Configuration & Modifications ......................................................... 5 5.1. Product Sample Details ........................................................................................... 5 5.2. EUT Description ...................................................................................................... 5 5.3. Support Equipment .................................................................................................. 6 5.4. Product operating modes ......................................................................................... 6 5.5. Product operating mode for testing .......................................................................... 6 5.6. Configuration ........................................................................................................... 6 5.7. Modifications ............................................................................................................ 6 6. Test Facility & Equipment ............................................................................................. 6 6.1. Test Facility ............................................................................................................. 6 6.2. Test Equipment ....................................................................................................... 6 7. Referenced Standards ................................................................................................... 7 8. Referenced Documents .............................................................…

Text truncated - open the document above for the full version.

Page 1 of 32 EMC ENGINEERS & LABORATORIES EMC Bayswater Pty Ltd 18/88 Merrindale Drive Croydon South, Victoria, 3136, Australia Telephone: +61 3 9761 5888 Facsimile: +61 3 8761 6547 Email: [email protected] ABN: 49 112 221 333 RADIO CERTIFICATION REPORT In accordance with: CFR47 FCC Part 15, Subpart C – Section 15.231 Automatic Technology Australia Pty. Ltd. WC-100v1 DAVE (Industrial/commercial doors/gates operator) – Wall Console FCC ID: X4K-CCW03103 REPORT: E2506-1852-2 DATE: September, 2025 Accreditation Number: 18553 Accredited for compliance with ISO/IEC 17025 – Testing The results of the tests, calibrations and/or measurements included in this document are traceable to Australian/national standards. NA…

Text truncated - open the document above for the full version.