X55FP7-PRPINLLunaBulb Preplnlay

3. Switching On/Off / Ein-/Ausschalten / Accensione/ Spegnimento OFFON 1x3x5x 6x 7x 1x3x5x 6x 7x I O I O I O I O A new PrepInlay needs a few seconds of charge to disable its shipping mode before it can be switched on. As long as no LunaBulb has been inserted or no slot has been selected, the display toggles between these two options: Ein neues PrepInlay benötigt einige Sekunden Ladezeit, um den Versandmodus zu deaktivieren, bevor es eingeschaltet werden kann. Solange keine LunaBulb eingesetzt ist oder kein Steckplatz ausgewählt wurde, wechselt die Anzeige zwischen diesen beiden Optionen: Prima di essere acceso, un PrepInlay nuovo ha bisogno di alcuni secondi di carica per la disabilitazione della modalità di spedizione. Fintanto che non viene inserita una LunaBulb o non viene selezionato un attacco, sul display si alternano le due opzioni che seguono: INTRODUCTION / INTENDED USE The PrepInlay offers space for up to eight LunaBulbs and is designed for professional use in the event and film industry. Thanks to its integrated battery, the PrepInlay can be used as an external control unit to configure the LunaBulbs inserted for different purposes: It is useful for fast adjust- ment of LunaBulbs for standalone operation, a quick connection of the inserted LunaBulbs with the AsteraApp or the preparation of LunaBulbs for DMX use. Its control panel is designed exactly as known from other Astera fixtures and gives you access to the most important menu settings and functions of the fixture(s) in use. Thanks to its built-in Bluetooth the PrepInlay can be used as BluetoothBridge (BTB). This device is designed for indoor use and has an IP 20 rating. Do not shake the device. Avoid brute force when installing or operating the device. When choosing the installation spot, please make sure that the device is not exposed to extreme heat or dust. Avoid direct sunlight for longer periods of time. The specified ambient temperature must be maintained. Keep away from direct insulation (particularly in cars) and heaters. Never use the device during thunderstorms connected to the power mains. Overvoltage could destroy the device. Always disconnect the device during thunderstorms. Operate the device only after having become familiarized with its func- tions. Please consider that unauthorized modifications on the device are not allowed due to safety reasons! If this device is operated in any way differ- ent from what is described in this manual, the device may suffer damages and the warranty may be void. The disclaimer includes all damages, liabil- ity or injury resulting from failure to follow the instructions in this manual. Furthermore, any other operation may lead to dangers like short circuit, burns, electric shock, crash etc. This device is not for household use and is not suitable for permanent installation. CONTENT / LIEFERUMFANG / ENTITÀ DELLA FORNITURA 1.: PrepInlay for LunaBulb (FP7-PRPCSE-E26/E27 / FP7-PRPCSE-B22) 2.: Power Supply for Helios/Titan Tube (FP1-CHR) 3.: Users Manual / Benutzerhandbuch / Manuale utente MANUFACTURER DECLARATION Hereby, Astera LED Technology GmbH declares that the type of radio equipment PrepInlay complies with Directive 2014/53 / EU. The full text of the EU Declaration of Conformity is available at the following Internet address: https://astera-led.com/prepinlay. Astera LED Technology GmbH declares that this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: • Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate this equipment. • This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons. --- English --- --- Deutsch --- TROUBLESHOOTING ProblemPossible causeSolution The fixture does not turn on. The battery may be empty. Connect it to AC and try again. The power cable is connected but the fixture is not charging. The battery may be fully charged. The fixture will only commence charging when its battery has a temperature of 45° C or less. Turn the fixture off and let it cool down; once cold enough, it will start charging. Astera LED Technology GmbH Schatzbogen 60 81829 Munich Germany [email protected] | www.astera-led.com DISPOSAL • The unit contains a lithium ion battery. • Don‘t throw the unit into the garbage at the end of its lifetime. • Make sure that disposal is carried out in accordance with local ordinances and/or regulations to prevent pollution of the environment! • The packaging is recyclable and can b…

Text truncated - open the document above for the full version.

Company:Astera LED Technology GmbH Address:Schatzbogen 60 Munich Germany 81829 Email:[email protected] Tel:+86 (755) 28237295 Fax:+86 (755) 28237295 Date: 2024-08-06 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attestation letter We, Astera LED Technology GmbH have a product LunaBulb Preplnlay Model number: FP7-PRPINL-E26/E27 FCC ID: X55FP7-PRPINL The RF chip CC1101, installed in our product, for the purpose of marketing, this chip only supports 917-922.2 MHz. The other functions, bands and modes has been shielded by the manufacturer using the software, the end user has no capability to activate it. Sincerely, Signature Contact Person:Gina Xiao Title:R&D Manager

Company:AsteraLED TechnologyGmbH Address:Schatzbogen60 MunichGermany81829 Email:[email protected] Tel:+86(755) 28237295 Fax:+86(755) 28237295 CFR 47 §2.911(d)(5)(i)AttestationLetter AttestationLetter Date: 08/ 06/ 2024 FEDERALCOMMUNICATIONSCOMMISSIONS Authorizationand EvaluationDivision 7435 OaklandMills Road Columbia,MD 21046 Ref: AttestationStatementsCFR 47 §2.911(d)(5)(i)Filing FCC ID:X55FP7-PRPINL Astera LED TechnologyGmbHcertifiesthat the equipmentfor which authorizationis sought ,is not“covered” equipmentprohibitedfrom receivingan equipmentauthorizationpursuantto section2.903 of the FCC rules. Sincerely, Signature Contact Person:Gina Xiao Title:R&D Manager

Company:AsteraLED TechnologyGmbH Address:Schatzbogen60 MunichGermany81829 Email:[email protected] Tel:+86(755) 28237295 Fax:+86(755) 28237295 CFR 47 §2.911 (d)(5)(ii)AttestationLetter AttestationLetter Date: 08/ 06/ 2024 FEDERALCOMMUNICATIONSCOMMISSIONS Authorizationand EvaluationDivision 7435 OaklandMills Road Columbia,MD 21046 Ref: AttestationStatementsCFR 47 §2.911(d)(5)(ii)Filing FCC ID:X55FP7-PRPINL Astera LED TechnologyGmbHcertifiesthat as of the date of the filing of the application,the applicantis not identifiedon the CoveredList as an entity producing“covered”equipment. Sincerely, Signature Contact Person:Gina Xiao Title:R&D Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2024-08-08 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID:X55FP7-PRPINL Astera LED Technology GmbH certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Astera LED Technology GmbH accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: Applicant: Astera LED Technology GmbH Address:Schatzbogen 60 Munich Germany 81829 FRN: 0019416791 Tel: +86 (755) 28237295 Email:[email protected] Signed by (printed name):Gina Tan Signature:

Company:AsteraLED TechnologyGmbH Address:Schatzbogen60 MunichGermany81829 Email:[email protected] Tel:+86(755) 28237295 Fax:+86(755) 28237295 FCC Authorization Date: 2024-08-06 FEDERALCOMMUNICATIONSCOMMISSIONS Authorizationand EvaluationDivision 7435 OaklandMills Road Columbia,MD 21046 Subject:Agent Authorization To whom it may concern: We(AsteraLED TechnologyGmbH),the undersigned,herebyauthorizeWorld Alliance Testing& Certification(Shenzhen)Co., Ltd to act on its behalf in all mattersrelatingto applicationfor Equipmentauthorization,includingthe signingof all documentsrelating to these matters.All acts carriedout by World AllianceTesting& Certification (Shenzhen)Co., Ltd on our behalf shall have the same effect as our own action. We, the undersigned,herebycertify that we are not subjectto a denial of federalbenefits, that includesFCC benefits,pursuantto Section5301 of the Anti-DrugAbuse Act of 1988, 21 U.S.C.862. This authorizationis valid until furtherwrittennotice from the applicant. Sincerely, Signature Contact Person:Gina Xiao Title:R&D Manager QA-FR-170-B

Company:AsteraLED TechnologyGmbH Address:Schatzbogen60 MunichGermany81829 Email:[email protected] Tel:+86(755) 28237295 Fax:+86(755) 28237295 FCC ConfidentialAuthorization Date: 2024-08-06 FEDERALCOMMUNICATIONSCOMMISSIONS Authorizationand EvaluationDivision 7435 OaklandMills Roa d Columbia,MD 21046 Subject:ConfidentialityRequestregardingapplicationfor certificationof FCCID:X55FP7-PRPINL In accordancewith Sections0.457 and 0.459 of the Commission’s Rules,AsteraLED TechnologyGmbHherebyrequestslong-termconfidentialtreatmentof information accompanyingthis applicationas outlinedbelow: Block Diagram Schematics OperationDescription The above materialscontainproprietaryand confidentialinformationnot customarily releasedto the public.The public disclosureof these materialsprovidesunjustified benefitsto its competitorsin the market. Sincerely, Signature Contact Person:Gina Xiao Title:R&D Manager

Report No.: 2405U23287E Page 1 of 6 EUT EXTERNAL PHOTOGRAPHS Report No.: 2405U23287E Page 2 of 6 Report No.: 2405U23287E Page 3 of 6 Report No.: 2405U23287E Page 4 of 6 Report No.: 2405U23287E Page 5 of 6 Report No.: 2405U23287E Page 6 of 6

L abel and Label location:

Report No.: 2405U23287E Page 1 of 9 EUT INTERNAL PHOTOGRAPHS Report No.: 2405U23287E Page 2 of 9 Report No.: 2405U23287E Page 3 of 9 Report No.: 2405U23287E Page 4 of 9 Report No.: 2405U23287E Page 5 of 9 Report No.: 2405U23287E Page 6 of 9 Report No.: 2405U23287E Page 7 of 9 UHF ANT BT/Wi-Fi ANT Report No.: 2405U23287E Page 8 of 9 Report No.: 2405U23287E Page 9 of 9

Report No.: 2405U23287EB Report Template: TR-4-E-011/V1.1 Page 1 of 8 RF Exposure Evaluation Report Report No.: 2405U23287EB Applicant: Astera LED Technology GmbH Address: Schatzbogen 60 Munich Germany 81829 Product Name: LunaBulb Preplnlay Product Model: FP7-PRPINL-E26/E27 Multiple Models: N/A Trade Mark: ASTERA FCC ID: X55FP7-PRPINL Standards: 47 CFR §1.1307 KDB 447498 D04 Interim General RF Exposure Guidance v01 Test Date: 2024-07-23 Test Result: Complied Report Date: 2024-08-05 Reviewed by: Approved by: Frank Yin Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing & Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: 2405U23287EB Report Template: TR-4-E-011/V1.1 Page 2 of 8 Announcement 1. This test report shall not be reproduced except in full, without the written approval of World Alliance Testing & Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 2024-08-05 Original Report No.: 2405U23287EB Report Template: TR-4-E-011/V1.1 Page 3 of 8 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Laboratory Location ................................................................................................................... 4 2 RF Exposure Evaluation ..................................................................................................................... 5 2.1 Standard .................................................................................................................................... 5 2.2 Result ......................................................................................................................................... 7 3 E.U.T Photo .......................................................................................................................................... 8 Report No.: 2405U23287EB Report Template: TR-4-E-011/V1.1 Page 4 of 8 1 General Information 1.1 Client Information Applicant: Astera LED Technology GmbH Address: Schatzbogen 60 Munich Germany 81829 Manufacturer: Astera Manufacturing Limited Address: 101, 201, 301, 401, 501, Bldg. 3, CLT Science & Technology Park, No. 7, GanLiliu Road, Jihua subdistrict, Longgang District, Shenzhen, P.C.518112. 1.2 Product Description of EUT The EUT is LunaBulb Preplnlay that contains a UHF radio and a certified BT/Wi-Fi module (FCC ID: 2AC7Z-ESP32WROVERE). Sample Serial Number 2N95-2 (assigned by WATC) Sample Received Date 2024-06-20 Sample Status Good Condition Frequency Range 917MHz – 922.2MHz Maximum Conducted Output Power 9.65dBm Modulation Technology GFSK Antenna Gain # -3.94dBi Spatial Streams SISO (1TX, 1RX) Power Supply DC 24V from adapter or DC 18V from battery Adapter Information Model: PA1050-240IB200 Input: AC100-240V, 50-60Hz, 1.8A Output: DC 24.0V/2.0A, 48.0W Max Modification Sample No Modification by the test lab 1.3 Laboratory Location World Alliance Testing & Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China Tel: +86-755-29691511, Email: [email protected] The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 463912, the FCC Designation No. : CN5040. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0160. Report No.: 2405U23287EB Report Template: TR-4-E-011/V1.1 Page 5 of 8 2 RF Exposure Evaluation 2.1 Standard According to §1.1307(b)(3)(i), For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of this section. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the fr…

Text truncated - open the document above for the full version.

Report Template: TR-4-E-038/V1.0 FCC Report No.: 2405U23287E Applicant: Astera LED Technology GmbH Address: Schatzbogen 60 Munich Germany 81829 Product Name: LunaBulb Preplnlay Product Model: FP7-PRPINL Multiple Models: N/A Trade Mark: ASTERA FCC ID: X55FP7 Standards: FCC CFR Title 47 Part 15C (§15.247) Test Date: 2024-07 Test Result: Complied Report Date: 2024-08 Reviewed by: Abel Chen Project Engineer World Alliance Testing No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: Page 1 of 39 FCC Test Report U23287EA Astera LED Technology GmbH Schatzbogen 60 Munich Germany 81829 LunaBulb Preplnlay PRPINL-E26/E27 ASTERA X55FP7-PRPINL FCC CFR Title 47 Part 15C (§15.247) 07-23 to 2024-08-02 Complied 08-05 Approved by: Abel Chen Project Engineer Jacob Kong Prepared by: World Alliance Testing & Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an Report No.: 2405U23287EA Jacob Kong Manager Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an Report Template: TR-4-E-038/V1.0 1. This test report shall not be reproduced except in full, Testing & Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the 5. The information marked “#” authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Version No. 00 Report No.: Page 2 of 39 Announcement This test report shall not be reproduced except in full, without the written approval of World Alliance Testing & Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. in compliance with the limits of the above regulation. t be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. is provided by the applicant, the laboratory is not responsible for its is information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Issued Date Description 2024-08-05 Original Report No.: 2405U23287EA without the written approval of World Alliance t be used by the client to claim product certification, approval, or endorsement by is provided by the applicant, the laboratory is not responsible for its is information can affect the validity of the result in the test report. Customer model name, Description Original Report Template: TR-4-E-038/V1.0 1 General Information ................................ 1.1 Client Information ................................ 1.2 Product Description of 1.3 Antenna information 1.4 Related Submittal(s)/Grant(s) 1.5 Measurement Uncertainty 1.6 Laboratory Location ................................ 1.7 Test Methodology ................................ 2 Description of Measurement 2.1 Test Configuration ................................ 2.2 Test Auxiliary Equipment 2.3 Test Setup ................................ 2.4 Test Procedure ................................ 2.5 Measurement Method 2.6 Measurement Equipment 3 Test Results ................................ 3.1 Test Summary ................................ 3.2 Limit ................................ 3.3 AC Line Conducted Emissions 3.4 Radiated emission Test Data 3.5 RF Conducted Test Data 3.5.1 20 dB Emission 3.5.2 Maximum Conducted Peak 3.5.3 Channel separation 3.5.4 Number of hopping Frequency 3.5.5 Time of occupancy (dwell time) 3.5.6 100 kHz Bandwidth of Frequency Band Edge 4 Test Setup Photo ................................ 5 E.U.T Photo ................................ Report No.: Page 3 of 39 Contents ................................................................................................ ................................................................................................ of EUT ................................................................................................ ................................................................................................ Related Submittal(s)/Grant(s) ................................................................ Measurement Uncertainty ................................................................................................ ................................................................................................ ................................................................................................ Measurement ................................................................................................ ................................................................................................ uxiliary Equipment ................................................................................................ ................................................................................................ ................................................................................................ Method................................................................................................ Equipment ................................................................................................ ..................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 2405U23287E Page 1 of 3 TEST SETUP PHOTOGRAPHS AC Line Conducted Emission Report No.: 2405U23287E Page 2 of 3 Radiated Emission Below 30MHz 30MHz~1GHz Report No.: 2405U23287E Page 3 of 3 1GHz~10GHz