XGS-OGI200Mobile Satellite Earth Station Module operating in Inmarsat IDP satellite network

OGi Modem User Manual File: OBCO-CERT-HW220026Rev 2.1 © ORBCOMM Proprietary Jun 2022 OGi Modem – User Manual Guide T401, Version .15 ii © ORBCOMM Proprietary Legal Notice This documentation is owned by ORBCOMM and protected by applicable copyright laws and international treaty provisions. Other copyrighted names used are the property of their respective owners. Therefore, you must treat this documentation like any other copyrighted material. You may not make the documentation, or copies thereof, available in any manner or form, or use, copy or transfer any part, to anyone outside your company. If you received this documentation by electronic transmission or download, by installation or use of the documentation, you acknowledge that you have read and understand this license agreement and agree to be bound by its terms and conditions. This documentation is provided on an as-is basis without any warranty of any kind. You assume the entire risk as to the results or performance of the software. Under no circumstance shall ORBCOMM be held liable for any direct, indirect, consequential, or incidental damages arising from the use or inability to use the software or documentation. All trademarks or registered trademarks are the property of their respective owners. INMARSAT, the Inmarsat logo and IsatData Pro are trademarks of Inmarsat used under license by SkyWave (an ORBCOMM company). Inmarsat is not responsible for the operation and regulatory compliance of the products and services referred to in this document that connect to the Inmarsat system. ORBCOMM reserves the right to make changes to products and or specifications without notice. Contact Information Online: • Website www.ORBCOMM.com Customer Support by Email: • customer.care@orbcom m.com Customer Support by Telephone: • +1-703-433-6300 OGi Modem – User Manual © ORBCOMM Proprietary iii T401, Version .15 TABLE OF CONTENTS Contents Legal Notice ................................................................................................................................................ 2 Contact Information .................................................................................................................................. 2 TABLE OF CONTENTS ........................................................................................................................... 3 Preface ........................................................................................................................................................ 5 Purpose ...................................................................................................................................................... 5 Notation ..................................................................................................................................................... 5 Reference................................................................................................................................................... 5 Safety Disclaimer ...................................................................................................................................... 5 Environmental Protection .......................................................................................................................... 6 Safety Precautions ..................................................................................................................................... 6 Limited Liability ....................................................................................................................................... 6 Certification ............................................................................................................................................... 6 Warranty .................................................................................................................................................... 7 1 Overview ........................................................................................................................................ 9 1.1 Overview of the Messaging System................................................................................................ 9 1.2 OGi Modem .................................................................................................................................. 10 1.3 Approved Antenna .................................................................................................................. 10 1.4 Key Features and Benefits ............................................................................................................ 13 1.5 Operating Modes ........................................................................................................................... 13 1.5.1 Satellite Modem....................................................................................................................... 13 1.5.2 GNSS Receiver ........................................................................................................................ 13 2 Compliance .................................................................................................................................. 14 Inmarsat Type Approval Industry Canada ............................................................................................ 14 FCC 14 CE Mark ............................................................................................................................................... 14 RoHS 14 3 Specifications ............................................................................................................................... 16 3.1 Connector ...................................................................................................................................... 16 3.1.1 Pin Descriptions ....................................................................................................................... 16 3.…

Text truncated - open the document above for the full version.

395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM June 23, 2022 OBCO-CERT-HW220024Rev 1.0 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Modular Approval Request FCC ID: XGS-OGI200 The following attestation addresses the requirements to support modular approval: Modular approval requirement Yes (provide brief statement) No * (a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly All circuits are shielded and no part is located external of the shielding. (b) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal N/A. There is no modulation/data input required. (c) The module must contain power supply regulation on the module Yes, the modular has its own power supply management circuits (d) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Yes, the module has its unique antenna connector, and it is marketed and operated only with Orbcomm designed antennas (e) The module must demonstrate compliance in a stand-alone configuration yes (f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) Yes, the module is labelled physically. (g) The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements Yes (h) The module must comply with RF exposure requirements yes * Please provide a detailed explanation if the answer is “No.” Signature date: June 23, 2022 Applicant name: Xinming Wang Applicant title: Director, Hardware Integrity & Certification Wang X

395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM June 6, 2022 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: XGS-OGI200 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request confidential treatment of information accompanying this application as outlined below: PERMANENT LONG-TERM CONFIDENTIALITY: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation SHORT TERM CONFIDENTIALITY FOR A PERIOD OF 180 DAYS: Internal Photos External Photos User Manual Test Set-up Photographs When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed : Printed name: Walter Sonnenfeldt Title: VP Regulatory Affairs

395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM June 6, 2022 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent FCC On our behalf, I appoint Spencer Zhong of Nemko Canada, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2, to act as our agent in the preparation of this application for equipment certification of OGI modular, Model Number L900-400. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides ORBCOMM License Corp., at 395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA Dated this 6th Day of June 2022 Agency agreement expiration date: June 5th, 2023 By: Walter Sonnenfeldt Signature Printed Title: VP Regulatory Affairs Telephone: 1-585-461-3018 On behalf of: ORBCOMM License Corp.

File: OBCO-CERT-HW220028Rev 1.0 OGi Modem external images 1. Top view 2. Bottom view 3. Side view front 4. Side view connector 5. Side view RF connector 6. Side view –rear side

Label location: Modem

1.750 REF 1.000 REF MANUFACTURE OR COPY FINISH SEE BOM SEE BOM DRAWN BY DATE CREATED TITLE: DWG. NO.REV SHEET 1 OF 2 2022-05-11 Arno Ryser SR401725-000 DO NOT SCALE FROM DRAWING D THIRD ANGLE PROJECTION 395 W Passaic St, Suite 325 INCHES [MILLIMETERS] UNLESS Tel: 703-433-6300 DRAWING FOR REF ONLY 1.75 x 1in ALL DIMENSIONS ARE IN Rochelle Park, NJ 07662, United States LBL OGi ISN OTHERWISE SPECIFIED ORBCOMM Inc. MATERIAL USE 3D CAD MODEL FOR © ORBCOMM Inc. PROPRIETARY AND CONFIDENTIAL DO NOT DISCLOSE SIZE B REVISIONS REV ECO DESCRIPTIONDATE APPROVAL B 2545 CHANGED REFERENCES FROM OG-ISAT TO OGi 25-FEB-16 B. HART C 3136 UPDATED TEMPLATE WITH ORBCOMM LOGO AND TITLE BLOCK 25-AUG-17 B. HART D 5632 MOVED GENERIC DRAWING TO SOLIDWORKS. PHASING OUT BARTENDER. ADDED VARIANT TABLE. ADDED -008 AND -009 VARIANTS. 16-MAY-22 B. HART NOTES: A MINIMUM CLEARANCE OF 0.100" (2.5mm) SHALL BE PROVIDED ON 1. ALL SIDES, UNLESS OTHERWISE SPECIFIED. GRAPHIC IMAGES ASPECT RATIOS MUST BE MAINTAINED. 2. TEXT SIZE MAY BE ADJUSTED AS LONG AS THE END RESULT IS LEGIBLE. 3. TEXT SIZE SHAL NOT BE SMALLER THAN 4.25pt. LABEL CONTENT FOR REFERENCE ONLY. TEXT AND GRAPHIC SIZE AND 4. LOCATION MAY NOT BE EXACTLY AS SHOWN. "<Country>" SHALL BE REPLACED BY THE NAME OF THE COUNTRY THE 5. PRODUCT IS BUILT IN. SEE VARIANT TABLE. TEXT FIELDS ARE VARIABLE. SEE VARIANT TABLE FOR SPECIFIC CONTENT.6. THE SERIAL NUMBER (BOX 3) AND BARCODE ARE AUTOMATICALLY 7. GENERATED BY THE ORBCOMM PRODUCTION SOFTWARE AND DOES NOT APPLY TO ALL VARIANTS (SEE VARIANT TABLE). WHEN NOT USED BOTH SHALL BE LEFT BLANK. LABEL TO BE PRINTED BY THERMAL TRANSFER. ANY MATERIAL 8. SUBSTITUTIONS MUST BE APPROVED BY ORBCOMM. PARTS TO BE MANUFACTURED IN COMPLIANCE WITH THE MOST 9. CURRENT RoHS & REACH DIRECTIVES. REFERENCE BOM FOR SPECIFIC LABEL STOCK. SUBSTITUTE WITH 10. ORBCOMM APPROVAL ONLY. GENERIC LABEL ARTWORK IS SAVED TO THE -000 RECORD IN AGILE.11. VARIANT TABLE CONTROLS SPECIFIC CONTENT. NOTE THAT ALL 12. GRAPHICS AND TEXT MAY NOT APPEAR ON ALL VARIANTS. BOX 1 BOX 2 BOX 3 BOX 4 BOX 5 QR CODE BOX 6 SEE VARIANT TABLE, BOX 1 SEE VARIANT TABLE, BOX 2 SEE VARIANT TABLE, BOX 3SEE VARIANT TABLE, BOX 4 SEE VARIANT TABLE, BOX 5 SEE VARIANT TABLE, BOX 6 GRAPHIC 'A' SEE NOTE 2 GRAPHIC 'B' SIZED TO 4mm TALL (MIN.) SEE VARIANT TABLE SEE NOTE 2 FINISH SEE BOM SEE BOM DRAWN BY DATE CREATED TITLE: DWG. NO.REV SHEET 2 OF 2 2022-05-11 Arno Ryser SR401725-000 DO NOT SCALE FROM DRAWING D THIRD ANGLE PROJECTION 1.75 x 1in LBL OGi ISN MATERIAL ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] UNLESS OTHERWISE SPECIFIED ORBCOMM Inc. 395 W Passaic St, Suite 325 Rochelle Park, NJ 07662, United States Tel: 703-433-6300 DRAWING FOR REF ONLY USE 3D CAD MODEL FOR MANUFACTURE © ORBCOMM Inc. PROPRIETARY AND CONFIDENTIAL DO NOT DISCLOSE OR COPY SIZE B VARIANT TABLE LABEL VARIANT REV BOX 1 PRODUCT SERIES BOX 2 DESCRIPTION QR CODE X = INCLUDE BLANK = EXCLUDE BOX 3 FCC ID BOX 4 IC BOX 5 Made in country X = INCLUDE BLANK = EXCLUDE BOX 6 SERIAL NUMBER X = INLCUDE BLANK = EXCLUDE GRAPHIC 'B' CE Graphic X = INLCUDE BLANK = EXCLUDE SR401725-001 CL900-300OGiX FCC ID: XGS- OGI100 IC: 11881A- OGI100 XXX SR401725-002 B SA901337-003 OGi MODEM ASSEMBLY X FCC ID: XGS- OGI100 IC: 11881A- OGI100 XXX SR401725-003 A ST100492-001 OGi NON FUNCTIONAL MODEL XXX SR401725-004 C SA901337-001 OGi MODEM REV 05, FW v1.04 ONLY MECHANICAL ASSEMBLY XX SR401725-005 B SA901337-002 OGi MODEM REV 06+, FW v1.04+ MECHANICAL ASSEMBLY XX SR401725-006 BL900-400OGi LPX FCC ID: XGS- OGI100 IC: 11881A- OGI100 XXX SR401725-007 C SA901337-003 OGi MODEM LP REV 06, FW v2.4.7+ MECHANICAL ASSEMBLY XX SR401725-008 AL900-400OGi V2X FCC ID: XGS- OGI200 IC: 11881A- OGI200 XXX SR401725-009 A SA901337-003 MECHANICAL ASSEMBLY OGi MODEM V2 FW:3.4.2+ XX

File: OBCO-CERT-HW220029Rev 1.0 OGi Images ---Internal 1. Top View 2. Bottom View

OGI Modem Images 1. External top view 2. External Bottom view 3. Internal top view 4. Internal Bottom view

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation. The SCC Accreditation Symbol is an official symbol of the Standards Council of Canada, used under licence. SCC File Number: 15064 (Ottawa/Almonte); 151100 (Montreal); 151097 (Cambridge) FCC and RSS-102 Annex C – MPE Calculation; Date: May 2021 Choose Scandinavian trust RADIO TEST REPORT – 462656APFWL Type of assessment: MPE Calculation report Manufacturer: Hardware Version Identification Number (HVIN): ORBCOMM License Corp. L900-400 Product Marketing Name (PMN): OGi V2 FCC ID: IC certification number: XGS-OGI200 11881A-OGI200 Specification:  FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  FCC KDB 447498 D01 General RF Exposure Guidance v06  ISED Canada RSS-102 Issue 5 Amendment 1, (February 2021) RSS-102 Annex B - Declaration of RF Exposure Compliance ATTESTATION: I attest that the information provided in Annex A is correct; that the Technical Brief was prepared and the information contained therein is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed; and that the device meets the SAR and/or RF field strength limits of RSS-102. Date of issue: July 11, 2022 Andrey Adelberg, Senior EMC/RF Specialist Prepared by Signature Report reference ID: 462656APFWL Page 2 of 6 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Almonte site: 1500 Peter Robinson Road West Carleton, Ontario Canada K0A 1L0 Tel: +1 613 256-9117 Test site identifier Organization Ottawa/Almonte Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 462656APFWL Page 3 of 6 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Evaluation summary ........................................................................................................................................................................... 4 1.1 MPE calculation for standalone transmission ........................................................................................................................................................... 4 Report reference ID: 462656APFWL Page 4 of 6 Evaluation summary 1.1 MPE calculation for standalone transmission 1.1.1 References, definitions and limits FCC §2.1091(d) (2) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1.1-1: Table 1 to §1.1310(e)(1)—Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 614 1.63 *(100) ≤6 3.0–30 1842 / f 4.89 / f *(900 / f 2 ) <6 30–300 61.4 0.163 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) <30 1.34–30 824 / f 2.19 / f *(180 / f 2 ) <30 30–300 27.5 0.073 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. RSS-102, Section 2.5.2 RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: • below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1 W (adjusted for tune- up tolerance); • at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 4.49/ƒ 0.5 W (adjusted for tune-up tolerance), where ƒ is in MHz; • at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 0.6 W (adjusted for tune-up tolerance); • at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 0.…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation. The SCC Accreditation Symbol is an official symbol of the Standards Council of Canada, used under licence. SCC File Number: 15064 (Ottawa/Almonte); 151100 (Montreal); 151097 (Cambridge) FCC 47-.25, RSS-170 RFID; Date: December 2015 Choose Scandinavian trust Wireless test report – 462656-1TRFWL Applicant: ORBCOMM License Corp. Product: Model: OGi V2 L900-400 FCC ID: IC Registration number: XGS-OGI200 11881A-OGI200  FCC 47 CFR Part 25 Satellite communications  RSS-170, Issue 3, July 9, 2015 Mobile Earth Stations (MESs) and Ancillary Terrestrial Component (ATC) Equipment Operating in the Mobile-Satellite Service (MSS) Bands Date of issue: July 6, 2022 Moustapha Salah Toubeh, Wireless/EMC Specialist Tested by Signature Andrey Adelberg, Senior Wireless/EMC Specialist Reviewed by Signature Report reference ID: 462656-1TRFWL Page 1of 36 Lab and test locations Company name Nemko Canada Inc. Facilities ☒ Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 ☐ Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 ☐ Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 ☐ Almonte site: 1500 Peter Robinson Road West Carleton, Ontario Canada K0A 1L0 Tel: +1 613 256-9117 Test site registration Organization Recognition numbers and location FCC/ISED CA2040 (Ottawa/Almonte); CA2041 (Montreal); CA0101 (Cambridge) Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 462656-1TRFWL Page 2of 36 Table of contents Table of contents .......................................................................................................................................................................................................... 2 Section 1. Report summary ................................................................................................................................................................................. 3 1.1 Applicant and manufacturer .................................................................................................................................................................................... 3 1.2 Test specifications .................................................................................................................................................................................................... 3 1.3 Test methods ............................................................................................................................................................................................................ 3 1.4 Statement of compliance ......................................................................................................................................................................................... 3 1.5 Exclusions ................................................................................................................................................................................................................. 3 1.6 Test report revision history ...................................................................................................................................................................................... 3 Section 2. Summary of test results ....................................................................................................................................................................... 4 2.1 FCC Part 25 test results ............................................................................................................................................................................................ 4 2.2 ISED RSS-GEN, Issue 5 test results ............................................................................................................................................................................ 4 2.3 ISED RSS-170, Issue 3 test results ............................................................................................................................................................................. 4 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 5 3.1 Sample information .................................................................................................................................................................................................. 5 3.2 EUT information ....................................................................................................................................................................................................... 5 3.3 Technical information ........................................................................................…

Text truncated - open the document above for the full version.