XJN-PA0750XTablet MID

1 Attention: This handbook contains important security measures and the correct use of the product information, in order to avoid accidents. Please make sure to reading the manual carefully before use the device.
Please don’t be in high temperature, moisture or very dust place
Please don’t be in high temperature, especially in summer don't put the device in the car when Windows closed.
Avoid fall or Violent collision of the device, don’t make the TFT display screen were violent tremor, This could cause TFT display screen abnormal or damage.
Please choose the appropriate volume, Use headphones should not be too big volume, If feel tinnitus, Lower the volume or stop using it
please charge In the following condition, A、 The battery power ICONS shows have no power B、 The system automatically shut off, startup after power off soon C、 Operation buttons no response D、 The machine that the top right corner show red icons
When the device in the format or ongoing upload and download file, please don't suddenly disconnect, This could cause application error.
For those who because of damage to the product, repair, or other causes of erased the memory, The company shall not be liable for any responsibility, please follow the user manual for the standardized operation to use the device.
Don’t disassemble the product, don’t use alcohol、Thinner or benzene to scrubbing products
Don't use the device one of the place of prohibit to use electronic equipment in regional (such as the plane)
Please don't using the Tablet PC when you in driving or walking down the 2 street,
USB just only be used for data transmission The company reserves the right to improve product, products specification and design have any change, The information is subject to changes without prior notice. (This tablet is no waterproof function) 【Remark】All pictures in this manual is just for your reference. products specification and design have any change, The information is subject to changes without prior notice. 3 1. Appearance and button: 1.1 Touch panel 7” Capacitive touch panel: In the Operation, to click, dragging on the touch 4 panel 1.2 POWER startup: Long Press and hold the power button, the system will enter the main interface shutdown: In the main menu interface, Press the power button about 5 second to shutdown, The system can hint "power off" option, Click ”ok”. You can safely shut down. Lock screen: Short press Power button to lock screen or unlock screen. Remark 1.When power is empty, system will shut down automatically. 2. Illegal turn off the device, restart will scan and restore the disk, it may take longer time to enter into system 1.3 Home Short Press Home button will return the last interface; long Press Home button will return the main interface 1.4 Volume +, Volume- The buttons on top Volume +, Volume-achieve changes in the volume. 1.5 earphone jack 3.5 mm standard earphone jack 1.6 TF card TF-CARD slot: external T-FLASH card 1.7 Micro USB Micro USB jack: you can use it to connect the computer for data transmission, charging and external connection USB flash drive 2. First use 2.1 Battery management and charge Before first use, please set the device's battery is fully charged Just need to connect the adaptor or USB interface, then you can charge 5 The first two times charging please keep about 6 hours, after that you just need 4 hours to charge. 【Remark】: This tablet using Built-in type polymer battery, Charge must be to choose standard adaptor (Input: AC110~240V 50/60Hz Max：180MA.. Output: DC5.0~5.5V/1.5A), this device without supply DC charging, USB interface can charge, Choose USB interface to charger During the charging, the battery icon will scroll When finished charging, battery icon will become green and stop rolling In order to prolong the service life of the machine, suggest use out battery power before charge it 【Remark】: 1. If you long time doesn’t to use this Tablet, in order to avoid power consumption caused damage, please charge/play the battery once a month. 2、After low battery shut down, connect DC adaptor, device will remind low battery, charging, need to wait some time until the battery is enough power to enter into main menu. 3. Device charging should be in standby status for reach normal charging time. Because with device and screen consumption, it may cause longer charging time. 6 2.2 Connection with PC Use USB cable to connect device to PC, device will pop up the USB connection window, click Turn on USB storage to connect to PC Into the load mode, you can copy; delete the file on the device and the file on the memory card. 7 3. Equipment operation interface 3.1 Unlock Interface After starting up, the Locking interface will be shown firstly, just as the following: It is only available to conduct operation after unlocking. Unlocking method: touch the right Lock icon by hands, and drag it next to a lock at the right, then release hands. The system will be unlocked, and enter the main interface. If drag it to the left, the system will enter the Camera mode. 3.2 Main interface describe The main interface of the handheld tablet includes two modes: the small tools on the desktop mode and the icons of application programs mode, both of which can be switched between each other via the button at the top right corner. The mode of small tools on the desktop is shown as follows: 8 Tap button on the shortcut bar to enter the interface of icon modes for application programs, which is shown as follows: 9 Tap button to enter the desktop interface. 3.3 Shortcut Mode Under the interface of the mode of small tools on the desktop, after pressing Menu key, the Shortcut menu will popup at the bottom of the screen, shown as follows: 10 3.4 Usage of Small Tools on Desktop Users can add, delete or install the small tools on the desktop, as well as add or delete icons of application programs or adjust the positions of icons; the icons can be dragged within the working zone, or between the working zo…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 3 Report Version 1 Reference No.: 120618N039 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 3 Report Version 1 Reference No.: 120618N039 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 3 Report Version 1 Reference No.: 120618N039

FCC ID: XJN-PA0750X This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 85mm X 30mm

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 3 Report Version 1 Reference No.: 120618N039 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 3 Report Version 1 Reference No.: 120618N039 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 3 Report Version 1 Reference No.: 120618N039 ANT

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 5 Report Version 1 Test Report No.: FS120618N039 RF EXPOSURE REPORT Applicant SHUOYING INDUSTRIAL (SHENZHEN) CO.,LTD Address Shuoying Road, Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Manufacturer or Supplier SHUOYING INDUSTRIAL (SHENZHEN) CO.,LTD Address Shuoying Road, Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Product MID Brand Name N/A Model PA0750 Additional Model & Model Difference: PA0751 Only differences the model No. for trading purpose. Date of tests June 19 ~ July 18 , 2012 the tests have been carried out according to the requirements of the following standards: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Reviewed by Glyn he Supervisor / EMC Department Approved by Sam Tung Manager / EMC Department Signature Date: July 18, 2012 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 5 Report Version 1 Test Report No.: FS120618N039 Table of Contents RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION.............................................................................................. 4 2. RF EXPOSURE LIMIT .....................................................................................5 3. CALCULATION FORMULA .............................................................................5 4. CLASSIFICATION ...........................................................................................5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER...................5 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 5 Report Version 1 Test Report No.: FS120618N039 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release N/A July 18, 2012 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 5 Report Version 1 Test Report No.: FS120618N039 1. CERTIFICATION PRODUCT: MID MODEL: PA0750 BRAND: N/A APPLICANT: SHUOYING INDUSTRIAL (SHENZHEN) CO.,LTD TESTED: Shuoying Road, Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 5 Report Version 1 Test Report No.: FS120618N039 2. RF Exposure Limit LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE the output power is ≤ 60/f(GHz) mW 3. Calculation Formula Limit(mW)=60/F (GHz) F = 2.4835GHz Limit=60/2.4835=24.16mW 4. Classification The antenna of this product, under normal use condition, is less than 20cm from the body of the user. So, this device is classified as Portable Device. 5. CALCULATION RESULT OF EIRP AND CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) EIRP (mW) LIMIT (MW) 802.11b max 2412MHz 10.42 3.0 <20 21.98 24.16 802.11g Max 2412MHz 9.51 3.0 <20 17.82 24.16 802.11n 20MHz Max 2412MHz 8.90 3.0 <20 15.49 24.16 802.11n 40MHz Max 2422MHz 9.25 3.0 <20 16.79 24.16

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 21 Report Version 1 Test Report No.: FV120618N039 TEST REPORT Applicant: SHUOYING INDUSTRIAL (SHENZHEN) CO.,LTD Address: Shuoying Road, Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Factory or Supplier: SHUOYING INDUSTRIAL (SHENZHEN) CO.,LTD Address: UShuoying Road, Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Product: MID Brand Name: N/A Model: PA0750 Additional Models & Model Difference: See Section 2.1 Date of tests: June 19 ~ July 18 , 2012 The submitted sample of the above equipment has been tested for according to the requirements of the following standards: FCC Part 15, Subpart B, Class B CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Glyn He Project Engineer / EMC Department Approved by Sam Tung Manager/ EMC Department Date: July 18, 2012 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 21 Report Version 1 Test Report No.: FV120618N039 Table of Contents RELEASE CONTROL RECORD................................................................................. 3 1 SUMMARY OF TEST RESULTS...................................................................... 4 1.1 MEASUREMENT UNCERTAINTY .................................................................. 4 2 GENERAL INFORMATION .............................................................................. 5 2.1 GENERAL DESCRIPTION OF EUT................................................................ 5 2.2 DESCRIPTION OF TEST MODES ................................................................. 6 2.3 DESCRIPTION OF SUPPORT UNITS............................................................ 6 3 EMISSION TEST.............................................................................................. 7 3.1 CONDUCTED EMISSION MEASUREMENT .................................................. 7 3.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................... 7 3.1.2 TEST INSTRUMENTS .......................................................................... 7 3.1.3 TEST PROCEDURES ........................................................................... 8 3.1.4 DEVIATION FROM TEST STANDARD ................................................. 8 3.1.5 TEST SETUP ........................................................................................ 9 3.1.6 EUT OPERATING CONDITIONS .......................................................... 9 3.1.7 TEST RESULTS .................................................................................. 10 3.2 RADIATED EMISSION MEASUREMENT ..................................................... 12 3.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT ......................... 12 3.2.2 TEST INSTRUMENTS........................................................................ 13 3.2.3 TEST PROCEDURE........................................................................... 14 3.2.4 DEVIATION FROM TEST STANDARD ............................................... 14 3.2.5 TEST SETUP ...................................................................................... 15 3.2.6 EUT OPERATING CONDITIONS ........................................................ 15 3.2.7 TEST RESULTS (BELOW 1GHz)........................................................ 16 3.2.8 TEST RESULTS (ABOVE 1GHz) ........................................................ 18 4 PHOTOGRAPHS OF THE TEST CONFIGURATION..................................... 20 5 APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB .......................................................... 21 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 21 Report Version 1 Test Report No.: FV120618N039 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release N/A July 18, 2012 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 21 Report Version 1 Test Report No.: FV120618N039 1 SUMMARY OF TEST RESULTS The EUT…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 on 41 Report Version 1 Test Report No.: FC120618N039 TEST REPORT Applicant: SHUOYING INDUSTRIAL (SHENZHEN) CO.,LTD Address: Shuoying Road, Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Manufacturer or Supplier SHUOYING INDUSTRIAL (SHENZHEN) CO.,LTD Address Shuoying Road, Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Product: MID Brand Name: N/A Model: PA0750 Additional Model & Model Difference: See Section 3.1 Date of tests: June 19 ~ July 18 , 2012 the tests have been carried out according to the requirements of the following standards: FCC Part 15, Subpart C (Section 15.247) CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Glyn He Project Engineer / EMC Department Approved by Sam Tung Manager / EMC Department Date: July 18, 2012 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 on 41 Report Version 1 Test Report No.: FC120618N039 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 4 1 SUMMARY OF TEST RESULTS.................................................................................................... 5 2 MEASUREMENT UNCERTAINTY ................................................................................................ 5 3 GENERAL INFORMATION ............................................................................................................6 3.1 GENERAL DESCRIPTION OF EUT .......................................................................................... 6 3.2 DESCRIPTION OF TEST MODES ............................................................................................ 7 3.2.1. CONFIGURATION OF SYSTEM UNDER TEST ............................................................... 7 3.2.2. TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL.................................... 8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................ 10 3.4 DESCRIPTION OF SUPPORT UNITS..................................................................................... 10 4. TEST TYPES AND RESULTS...................................................................................................... 11 4.1 CONDUCTED EMISSION MEASUREMENT........................................................................... 11 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ................................................11 4.1.2 TEST INSTRUMENTS......................................................................................................11 4.1.3 TEST PROCEDURES ..................................................................................................... 12 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................... 12 4.1.5 TEST SETUP................................................................................................................... 13 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 13 4.1.7 TEST RESULTS .............................................................................................................. 14 4.2 RADIATED EMISSION MEASUREMENT ............................................................................... 16 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................................... 16 4.2.2 TEST INSTRUMENTS..................................................................................................... 17 4.2.3 TEST PROCEDURES ..................................................................................................... 18 4.2.4 DEVIATION FROM TEST STANDARD ........................................................................... 18 4.2.5 TEST SETUP................................................................................................................... 19 4.2.6 EUT OPERATING CONDITIONS .................................................................................... 19 4.2.7 TEST RESULTS .............................................................................................................. 20 4.3 6dB BANDWIDTH MEASUREMENT ..............................................................................…

Text truncated - open the document above for the full version.

1 Set-up for radiated emission test <Frequency Range 30MHz~1GHz> <Frequency Range above1GHz> 2 Set-up for conducted emission test