XJN-SYTAB10MTPID

10” Tablet Wireless Mobile Internet Device Model Number: SYTAB10MT SYNET7LP PDF created with pdfFactory Pro trial version www.pdffactory.com Getting to Know Your New Tablet: PDF created with pdfFactory Pro trial version www.pdffactory.com Important Notes: Tap screen with the stylus or fingernail rather than the pad of your finger. Note that this product has a resistive touch screen. This machine senses pressure applied to it in specific areas and acts on this pressure. Please use a stylus or your fingernail when tapping the screen for optimal usage. Note that simply touching the screen with your finger will not produce optimal results. The Host USB port is used primarily to connect USB storage devices. The Mini HDMI port is an “OUT” port designed to output to HDMI devices. The software on your tablet is updated frequently to ensure your tablet is always optimized. Make sure to check for and run updates. Read on for details on how to update your device. The icons shown here in this product manual may be different than the icons of the actual product. PDF created with pdfFactory Pro trial version www.pdffactory.com Ge ing Started 1. CHARGING YOUR DEVICE Plug the power adapter into an electrical outlet and connect your device to the adapter. It is recommended that you fully charge the battery before use, for at least six hours. 2. TURNING YOUR DEVICE ON Press the power button on the top of the device to turn it on. You can use the device while the battery is charging. To turn the power off, hold the power button of your device for about five seconds. Then tap Power Off when it appears on the screen, followed by OK. Sleep Mode: Your device will go into sleep mode after a period of inactivity. To get out of sleep mode, press the power button to start using it again. 3. CONFIGURING THE TOUCH SCREEN 1. Press the MENU button on the top of the product. 2. Tap Settings on the bottom menu. 3. Scroll down and tap Touch Screen Calibrate. 4. Use the stylus to tap the middle of the displayed crosshairs to calibrate the touch screen. Note: After a system reset, it may be necessary to re- calibrate your screen. PDF created with pdfFactory Pro trial version www.pdffactory.com 4. INSERTING AN SD CARD Using an SD Card allows you to import other files, download applications and play stored media. Many of the features included on your device will not function properly without the use of an SD Card. Insert a Micro SD Card (up to 16GB) into the top SD Card Slot. You will hear a click when the card is inserted properly. SD Card Slots Please use the Primary SD Card Slot (top SD card slot) as the primary card slot for Android application storage and operations. The Media slot (secondary read only SD card slot) is intended to be used for read-only playback of videos, music, photos etc. Your tablet will not write or save information to the Media Slot. It is intended only for media playback. Please make sure that the Media Slot is only used to play Media files and not used to store files from your tablet. PDF created with pdfFactory Pro trial version www.pdffactory.com PDF created with pdfFactory Pro trial version www.pdffactory.com Home Screen Features 1. Return to Home Screen 2. Screen Orientation (Portrait or Landscape) 3. Wi-Fi Connection Status 4. Battery Level 5. Time Display 6. Screen Shot: tap to take a picture of your screen 7. Settings Menu 8. Back Button 9. Search Bar 10. Application Quick Launch Bar: Frequently used applications can be dragged to the bar to be displayed. Tap the icon to access the application. 1 2 3 4 7 10 9 5 6 8 PDF created with pdfFactory Pro trial version www.pdffactory.com DISPLAY PREFERENCES Landscape (default) Portrait The screen orientation is set to rotate automatically between portrait and landscape (and vice versa) during use. To switch between Landscape and Portrait mode, tap on the Screen Orientation icon on the top menu bar. (If the Orientation icon is not present, press the menu button. Tap the Sounds and Display icon and then tap the Orientation icon. Then Orientation icon should show up on the top as shown in the screen shot). PDF created with pdfFactory Pro trial version www.pdffactory.com SETTING DATE AND TIME 1. Tap Settings from the Home Screen to access the device settings. 2. To set up the current date and time, tap Date & Time. 3. Tap the Automatic option to turn off the network-provided values. 4. Tap Set Date and enter the current date. 5. Tap Set when finished. 6. Tap Set Time and enter the current time. 7. Tap Set when finished. 8. Change the way in which the date and time are displayed by tapping the Use 24-hour format and Select Date format options. PDF created with pdfFactory Pro trial version www.pdffactory.com WI-FI SETUP 1. To set up Wi-Fi, tap Wi-Fi settings on the Application Home Screen Panel (or tap Settings then tap Wireless & Networks). 2. Tap Turn on Wi-Fi. The device will automatically scan and list local Wi-Fi networks that it finds. A lock image indicates a secure network that requires a password for access. 3. Tap the network that you would like the device to connect. 4. If a password is required, a notification screen will appear to allow you to enter the password. Tap the wireless password box to access the keyboard and enter the password. Tap Done when finished. 5. A wireless icon will appear in the toolbar to indicate that you are connected to the wireless network. 6. Tap the back arrow to exit to the Home Screen. PDF created with pdfFactory Pro trial version www.pdffactory.com EMAIL SETUP v POP3, IMAP, and other common email accounts are supported. 1. To set up Email, tap Email on the Application Home Screen Panel. 2. Enter your email address and password. 3. Tap Next. This will be your default account unless you add another email address. After you have more than one account set up, you can select a different address as the default account. (optional) To select the account type, or modify individual account settings, tap Manual Setup afte…

Text truncated - open the document above for the full version.

Block Diagram RF (WIFI) MODULE: Oscillator 40MHz LC Filter ANTENNA: 2412-2462MHz RT2070 LAN PORT INFOTMIC IMAP200 Working frequency: 500MHz 12MHz 32.768MHz Micro SD 1 & 2 25MHz

External Photos

Label Size and Location

Internal Photos

Technical Description The Equipment Under Test (EUT) is a PID with internal WiFi module operating at 2.412-2.462GHz, 11 channels with 5MHz channel spacing. The EUT has a resistive touch screen and can be operated by stylus or your nail tapping the screen. The device is powered by 2 X 4.2V rechargeable batteries or an AC/DC Adapter (INPUT: AC100-240, 50/60Hz 0.65A; OUTPUT: DC 9V, 2.5A). For more detailed features description, please refer to the user’s manual. Type of Modulation: CCK for 802.11b and OFDM for 802.11g. Antenna Type: Internal Integral PIFA Antenna. Frequency List: 2412MHz, 2417Mhz, 2422MHz, 2427MHz, 2432MHz, 2437MHz, 2442MHz, 2447MHz, 2452MHz, 2457MHz, 2462MHz Main IC Function: 1. MAIN PCB 1) U1*(IMAP200) is CPU with varied function such as Control Unit Arithmetic Logic Unit. (The symbol * express English Letter.) 2) U4 and U5 are DDR2 SDRAM. 3) U3 is NAND flash memory. 4) U31 is HDMI decode IC. 5) U8 is SINGLE-CHIP/SINGLE-PORT 10/100M FAST ETHERNET PHYCEIVER. 6) U29 is isolation transformer. 7) U30 is G-Sensor. 8) U28 is audio decode IC. 9) Q12 and U43 are rechargeable IC. 10) U35, U36, U37, U38, U20, U13, U15, U18, U22, U11, U30, U41, U7, U40, U27, U34 and U2 are power regulator 11) U6 and U9 are power amplifier. 12) X2 is oscillator for U1 main frequency. 13) X7 is oscillator for U1 RTC frequency. 14) X4 is oscillator for U8. 15) U25 is touch screen controller. 16) U27 is GPS IC. 17) U42 is CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY. 18) U32 is reduced Swing LVDS 24-Bit / 18-Bit Color Host LCD Panel Interface. 19) J6 is PC camera connecter. 2. WIFI PCB 1） U7 is MCU for RF Signal control. 2） U3 is power amplifier. 3 ） U4 is 1.5W L/ S-BAND SPDT SWITCH 4） U1 is band pass filter. 5） U5 is oscillator for U7. RF IC SPECIFICATION DSR2070_V.1.0_052208 - I - Form No.：QS-073-F02 Rev.：1 Kept by： DCC Ret. Time： 5 Years Datasheet RT2070 Preliminary Revision May 22, 2008 Product Description The RT2070 is a highly integrated MAC/BBP and 2.4 GHz RF single chip with 54Mbps PHY rate supporting. It fully complies with IEEE 802.11 b/g feature rich wireless connectivity at high Block Diagram RF receiver ADC Baseband MAC/ Packet Buffer/ Encrption Engine USB System Control USB bus EEPROM/ GPIO/LED digital controlled RF DAC RF transmitter RF_RF2G_INP/ RF_RF2G_INN RF_RF2G_OUTP standards, delivers reliable, cost‐effective, throughput from an extended distance. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design. deploys a high efficient USB engine and hardware data processing accelerators without overloading the host processor. The RT2070 is designed to support standard based features in the areas of security, quality of service and international regulation, giving end users the greatest performance anytime in any circumstance. Ralink Technology, Corp. (Taiwan) 5th F. No. 36,Taiyuan St, Jhubei City, Hsin‐Chu, Taiwan, R.O.C. Tel: 886‐3‐567‐8868 Fax: 886‐3‐567‐8818 Ralink Technology, Corp. (USA) Cupertino, CA9501420833 Stevens Creek Blvd. Ste 200 Tel: (408) 725‐8070Fax:(408)725‐8069 http://www.ralinktech.com Part Number Temp Range Package RT2070L ‐10~85°C Green/RoHS Compliant 76LD QFN (9mmx9mm) Application •IEEE802.11 b/g Wireless Local Area Networks •USB 2.0 Wi‐Fi Dongle Features • CMOS Technology with RF, Baseband, and MAC Integrated. • 1T1R Mode with 54Mbps PHY Rate for Both Transmit and Receiving. • WEP 64/128, WPA, WPA2 • QoS‐WMM, WMM‐PS • Multiple BSSID Support • USB 2.0 • International Regulation ‐ 802.11d + h • Cisco CCX Support • Bluetooth Co‐existence • Low Power with Advanced Power Management • Operating Systems ‐ Windows XP, 2000, ME, 98SE, Vista, Linux, MAC Order Information DSR2070_V.1.0_052208 - i - Form No.：QS-073-F02 Rev.：1 Kept by： DCC Ret. Time： 5 Years Datasheet RT2070 Preliminary Revision May 22, 2008 Table of Content 1. Pin Layout.........................................................................................................................................................1 2. Pin Description.................................................................................................................................................2 3. Maximum Ratings, Operation Conditions and Electrical Characteristics ........................................................5 3.1. Absolute Maximum Ratings ...................................................................................................................5 3.2. Thermal Information..............................................................................................................................5 3.3. Operating Conditions .............................................................................................................................5 3.4. Storage Condition...................................................................................................................................5 3.5. DC Electrical Characteristics................................................................................................................... 5 4. Register map ....................................................................................................................................................8 4.1. SCH registers ..........................................................................................................................................9 4.2. PBF registers.........................................................................................................................................10 4.3. TEST registers .......................................................................................................................................16 4.4. MAC registers.......................................................................................................................................20 4.5.1. MAC System configuration registers (offset:0x1000) .....................................................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES Radio Frequency Radiation Exposure, FCC Rule 15.247(i): The EUT is a Tablet PC with WiFi unit used in portable application, less than 20 cm from any body part of the user or near by persons. The power thresholds for source-based time-averaging Conducted output power (in the worst-case 802.11b 2412MHz) = 13.2dBm And SAR Low Threshold Level: 60/f (GHz) = 60/2.45 = 24.5mW = 13.9dBm Since 13.2dBm is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing. FCC ID: XJN-SYTAB10MT

7LWOH 6L]H 'RFXPHQW1XPEHU 5HY 'DWH 6KHHW RI  /&' $ ,1)270,;02%,/(,17(51(7'(9,&(
 & 7KXUVGD\*$XJXVW* 0RWRU  ; < ; < 9OHG 9OHG*1'
Q) $ % & '  ' & % $  /(' /(' * * * * * * * * * * * * * * * * * * * * * * * * *      * * *   ** **   *   73 73 73 73 & & X)9 & & X)9  9&&  &6  ;  <  ;  ',1  95()  ,29''  9%$7  $8;  *1'  <  '287  3(1,54  %86<  '&/. 8 76& 76& & & X)9 4 627 6, 73 & & X)9 73 / / 50 5 5 7: 5 5 .7 5 5 .7: 5 5 7: 73 / X+ & & X)91& & & X)9 5 5 .7: & & X)91& 4 627  5 5 .7: & & X)9 73      - WSBFQQ */,'(3$'&11 & & X) 5 5 .7:  9,1  (1  /;  293  )%  *1' 8 .% 5 5 .7: 5 5 7: 5 5 .7: 73 & & X)91& & & X)9 73 / / 50 73 5 5 7: 73 & & X)9 & & X)9 5 5 .7: 5 5 .7:1& & & X)9  - 0RWRU 73 & & X)91& 5 5  73  9(','  86%B,'  86%B'  86%B'  86%B9''  1&  $'-  *1'  9/('  9/('  9/('  *1'  *1'  9&&B  9&&B  *1'  5;,1  5;,1  *1'  5;,1  5;,1  *1'  5;,1  5;,1  *1'  5;&/.,1  5;&/.,1  86%B*1'  '$7$(','  &/.(','  *1'  *1' - &211B;3,1003/ &11B; & & X)9      - WSBFQQB */,'(3$'&111& / / 1& 73 73 & & X)9 73 73    4 627 $2 / / 501&    4 627 $2 5 57: 5 5 7: 5 5 .7: / / 50 5 5 7: & & Q)9 & & Q)9 5 5 .7: & & X)9  56  7'  7$  7$  *1'  7%  7%  7'  9&&  7'  7%  7%  *1'  7%  7%  7'  5)  7'  7%  7&  *1'  7&  7&  7&  7'  9&&  7&  7&  7$  7$  7$  *1'  7$  7$  7'  /9'6B*1'  7$  7$  7%  7%  /9'6B9&&  /9'6B*1'  7&  7&  7&/.  7&/.  7'  7'  /9'6B*1'  3//B*1'  3//B9&&  3//B*1'  3:'1  &/.,1  7&  *1' 8 7+&/9'0' ' 1 73 5 5 7: 5 5 .7: 5 5 .7: 5 5 . & & Q)9   5 QF  5    5 .(   & 3   5$ QF   5    5 . 9&&B/&' 9'(9 9''B027259'' 9&&B/&' 9&&B/&' 9&&B/&' 9/('@ 9&&B/&'9 9&&B/&'$ 9'' 9'' 9&&B/&'$ 9&&B/&' 9/('@ 9&&B/&'9 9'(9 9'' 9&&B/&' 9&&B/&'99&&B/&' ;99' ;9+6<1& ;996<1& ;99'(1 ;99' ;99&/. &/.287 &/.287@ ;99' ;99' ;99' ;99' ;99' ;99' ;99' ;99' ;99' 287@ 287 ;99' ;99' ;99' ;99' 287 287@ ;99' 287 287@ ;99' ;99' ;99' ;99' ;99' 287 287@ %$7B92/ ;66,&61 ;66,&/. ;66,5;' ;66,7;' ;99' ;99' ;99' ;7287 ;85;' 287 287@ 287 287@ 287@ 287 ;,&6&/ ;,&6'$ &/.287 &/.287@ ;(,17 ;6''$7 ;36&/. ;81&76 287@ 287 287 287@ 287 287@ &/.287 &/.287@ ;7287 56B/9'6 $'3B'(7   %$7B92/ ;,&6&/ ;,&6'$ 56B/9'6 &/.287@ &/.287 287@ 287 287@ 287 287@ 287 9&&B/&' 9&&B/&' *1' *1' *1' *1' *1'*1' *1' *1' *1' 7LWOH 6L]H 'RFXPHQW1XPEHU 5HY 'DWH 6KHHW RI & 7KXUVGD\*$XJXVW* "   $ % & '  ' & % $                 * * * * ** **    * & & X)9  73 3$'; / / 50 5 5 .7: & & X)9 & & X)9   0,& 0,&05 0,& 5 5 8)  (1  %3  ,1  ,1  92  9''  *1'  92 8 0623 -=  9,1  *1'  (1  %3  9287 8 62730 533%5 5 5 .7: & 7$1B% X)9  73 3$'5; & & X)91& & & X)9 5 5 .7: & & X)  1&  1&  1&  1&  1&  1&5%  5%  5(  &(  &(  1&  9&&  966  1&  1&  &/(  $/(  :(  :3  '18  '18  '18  1&  1&  '18  '18  1&  1&  ,2  ,2  ,2  ,2  1&  1&  1&  966  9&&  '1835(  1&  1&  ,2  ,2  ,2  ,2  1&  1&  1&  '18 8 7662330 .*$*8% & & X)9 & & X)9 & & X)9 & & S)9 & & X)9 & & X)9 5 5 7: 5 5 8) & & X)91& 5 5 .7: 5 5 .7: 5 5 7: & & X)9 5 5 .7: & 7$1B% X)9 & & X)9  73 3$'5; 5 5 .7: 5 5 .7:1& & & X)9 & & X)9 5 5 .7: & & X)9       - .-$1; 3+21(-$&. 5 5 .7: & & X)9 & & X)9  73 3$'; & & S)9  '9''  39''  '*1'  0&/.  6&/.  '6',1  '/5&.  $6'287  $/5&.  &(  6&/  6'$  /,1  5,1  /,1  5,1  1&  +39''  $9''  $*1'  +3*1'  /287  5287  /287  5287  '$&95()  $'&95() B 90,'  *1'B7+(5 8 (64)1 (6 & & X)9 & & X)91& 5 5 .7: & & Q)9 5 5 7: & & X)9 & & X)9 & & X)91& & & X)9  (1  %3  ,1  ,1  92  9''  *1'  92 8 0623 -=
& 
&  &3 & 1& &3 & 1&   5   5 & XI  5  & 8)   5   ' '260$ ,1   5 1&  *1'  5(6(7  9'' 8 627 57&*9 & QF 9'',2 9'',2 9&&$8 9&&$8 9'' …

Text truncated - open the document above for the full version.

Plot: B2A1 Plot: B2B1 Plot: B2C1 Plot: G2A1 Plot: G2B1 Plot: G2C1

Plot: B3A1 Plot: B3B1 Plot: B3C1 Plot: G3A1 Plot: G3B1 Plot: G3C1

Plot: B4A1 Plot: B4A2 Plot: B4B1 Plot: B4B2 Plot: B4C1 Plot: B4C2 Plot: G4A1 Plot: G4A2 Plot: G4B1 Plot: G4B2 Plot: G4C1 Plot: G4C2

 Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com Mar 2, 2011 SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. NO.1 Shuoying Rd., Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Dear Tony Pan: Enclosed you will find your file copy of a Part 15 report (FCC ID: XJN-SYTAB10MT). For your reference, TCB will normally take another 20 days for reviewing the report. Approval will then be granted when no query is sorted. Please contact me if you have any questions regarding the enclosed material. Sincerely, Shawn Xing Manager Enclosure  • The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. TRF no.: FCC 15C_Txa FCC ID: XJN-SYTAB10MT Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. Application For Certification PID (WiFi Transceiver) (FCC ID: XJN-SYTAB10MT) Model: SYTAB10MT SZ11010019-1 Billy Li Mar 2, 2011 INTERTEK TESTING SERVICE TRF no.: FCC 15C_TXa FCC ID: XJN-SYTAB10MT i LIST OF EXHIBITS INTRODUCTION EXHIBIT 1: Summary of Tests EXHIBIT 2: General Description EXHIBIT 3: System Test Configuration EXHIBIT 4: Measurement Results EXHIBIT 5: Equipment Photographs EXHIBIT 6: Product Labeling EXHIBIT 7: Technical Specifications EXHIBIT 8: Instruction Manual EXHIBIT 9: Miscellaneous Information EXHIBIT 10: Test Equipment List INTERTEK TESTING SERVICES TRF No.: FCC 15C_TXa FCC ID: XJN-SYTAB10MT ii MEASUREMENT/TECHNICAL REPORT SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. - MODEL: SYTAB10MT FCC ID: XJN-SYTAB10MT This report concerns (check one) Original Grant X Class II Change Equipment Type: DTS - Part 15 Digital Transmission Systems (WiFi transmitter portion) Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until : date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator - the new 47 CFR [10-01-09 Edition] provision. Report prepared by: Shawn Xing Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, Block D, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Phone: (86 755) 8601 6288 Fax: (86 755) 8601 6751 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TXa FCC ID: XJN-SYTAB10MT iii Table of Contents 1.0 Summary of test results .............................................................................. 2 2.0 General Description................................................................................................4 2.1 Product Description ....................................................................................... 4 2.2 Related Submittal(s) Grants .......................................................................... 5 2.3 Test Methodology.......................................................................................... 5 2.4 Test Facility ................................................................................................... 5 3.0 System Test Configuration ................................................................................. 7 3.1 Justification ................................................................................................... 7 3.2 EUT Exercising Software............................................................................... 7 3.3 Details of EUT and Description of Peripherals............................................... 8 3.4 Measurement Uncertainty.............................................................................. 8 3.5 Equipment Modification ................................................................................. 8 3.6 Support Equipment List and Description....................................................... 9 4.0 Measurement Results.......................................................................................... 11 4.1 Maximum Conducted Output Power at Antenna Terminals.......................... 11 4.2 Minimum 6dB RF Bandwidth ....................................................................... 12 4.3 Maximum Power Density ................................................................................13 4.4 Out of Band Conducted Emissions ...............................................................15 4.5 Out of Band Radiated Emissions ................................................................. 17 4.6 Transmitter Radiated Emissions in Restricted Ba…

Text truncated - open the document above for the full version.

Conducted Photos

Radiated Photos