XJNDV1100SADigital Camcorder

User Manual RoHS COMPLIANT Digital Camcorder 1 Introduction Congratulations on your purchase of this digital video camera. Before using the camera, please read this user manual carefully. W ith this digital video camera you can take both video clips and still photos. The illustrations in this user manual are to visually detail the operation of the digital video camera. Notice for use General: 1. Never open the housing of the digital video camera as some parts may cause an electrical shock. 2. Moisture, extreme pressure and overheating may damage this digital video camera. Memory and storage: 1. SD/MMC/SDHC cards are compatible with this camera, with a maximum capacity of 16GB. 2. W hen buying a SD/MMC/SDHC card, take the digital video camera with you to ensure compatibility. 3. When a SD/MMC/SDHC card is inserted, the internal memory of the digital video camera will not function. 4. The card slot has a write-protect switch, which can be used to prevent accidental deletion of data. W hen this switch is pushed to the bottom and locked, the data in the card will be prot ect ed. How ever, when the c ard is in writ e-prot ect st at e, it cannot be used for shooting or deleting, etc. 5. W hen st oring doc uments using the int ernal mem ory or the memory c ard, make sure that the size of the documents does not exceed the capacity of the memory. 2 Maintenance and care: 1. To clean the lens, first blow away dust on its surface, then use cloth or tissue to wipe the lens. If necessary, use lens cleanser. 2. Avoid touching the lens with your fingers. 3. W hen left idle for long periods, remove the batteries from your digital video camera and st ore in a dry and dark plac e. Miscellaneous: 1. W hen switching video output between LCD display and video devices, be sure to exit from the ‘ play ’ or ‘ record ’ st at e. 2. This digital video camera is suitable for environments between 0 ° - 40 ° C or 32 ° -104 ° F. Never keep the digital video camera in extremely high temperatures, such as a car parked in the sun. Never keep the digital video camera in damp or moist places. In order to prevent the digital video camera from condensation, when moving from a cold to a warm place, be sure to keep it in sealed plastic bag, and open the bag and take it out when the camera reaches the indoor t emperature. 3. TV programs, movies, music, images and other resources may be protected by copyright; therefore, without prior permission, the shooting/use of these resources may violate copyright laws and regulations related. Please note that the resources under the protection of copyright can be used within the permission of related laws and regulations. 3 System requirements When operating and using this digital video camera, be sure the computer you are using meets some basic requirements. Doing so will allow you to operate the camera to its full functionality. Below are the requirements: Operation System Microsoft Windows 98, 2000,XP, Vista, W indows 7 CPU Above Intel PIII 667 or CPU of equal performance Memory Above 128 MB Sound card and display card DirectX8 or above. CD-ROM 4 × speed or above Hard Disk 1 GB space above useable Other One standard USB 1.1 or USB 2.0 port 4 Getting to know your camera 1. Appearance and Buttons 5 2. Basic operation 2.1 Installing the battery Slide down the back cover and insert three new AAA alkaline batteries. Align with correct polarit y of batt ery terminals. Close the back c over. 2.2 Using a SD/MMC/SDHC card Turn your camcorder OFF before inserting / removing the SD Card. Insert a memory card into the SD/MCC/SDHC card slot. Push it down until the card stays latched. Do not force – check card ’ s position according to the position mark on the camera. Push and release inserted card if you wish to remove or replace the card. 1. Power Key 2. SD/MMC SDHC Card Slot 3.Microphone 4.Lens 5.Busy indicator 6.Speaker 7. USB Switch 8.USB Connector 9.LCD panel 10.Set Key 11.Mode Key 12. Right Key 13. Confirm/OK key 14.UP key 15.Down key 16.Left key 6 - Note that the SD Card has a tiny LOCK switch on the side. Set the switch to the un-LOCK position to store recorded videos and still pictures. 2.3 Powering on/off In the power-off state, press and hold the power key to power on the camera. In the power-on state, press the power key to power off the camera. In the power-on state, let the camera idle for 1 minute  default  to power off the camera aut omatic ally. In power-on state, when the battery level is very low, the camera will turn off after several seconds and you must replace the battery. 2.4 Menu Setting Under picture taking/recording mode,press "SET" key to open set menu and then press the up/down/left/right key to select menu. Press OK or right key to enter the submenu. W hen selecting menu, the background of the selected menu option w ill be displayed in blue. 7 Date and time setting Press the SET key to open the menu and then press the left and right key to enter setting menu. Press the down key to select “ date and time ” menu option and press OK key to enter setting window. 8 2.4 Change mode After power on, it will enter video record mode, press "Mode" key to change mode among video record, still camera and playback. 2.5 Video record Your camera will power on in the video record mode. To record a video press the Confirm/OK key to start video recording. Timing began to appear red words on the right top of the screen.The time W hile recording, press the Confirm/OK key again to stop recording. 9 In the video record mode  you can use the zoom feature by pressing the up or down key zooms in or out on the image before you rec ord or while you are rec ording.W hile it is zooming, you can find the zoom rate on the bottom of the screen. 2.7 Still camera Press the Mode key to switch from video mode to still camera mode. In still camera mode, press Confirm/OK key to take a picture, by pressing the up or down key you can zoom in or out on the image. 10 2.8 Playback videos or photos Press the mo…

Text truncated - open the document above for the full version.

DSP SEENSOR SPI/NANA F LASH SDRAM USB TV OVT SD CARD LCD/LCM POWER KEY UI 32.768KHZ Crystal 27.00MHZ AUDIO OVT LENS HDMI

ITONE DIGITAL SHENZHEN CO., LTD. FCC Authorization Letter Number: CF304 Version: V01 Date: 01-02-2010 We, (the approval holder) Company name SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. Addresss NO.1 Shuoying Rd., Hebei Industry Area, Dalang, Longhua Town, Baoan City Shenzhen Country China declare that the following representative (agent): Name (person) M. Koop Company name Teleconformity Address Rietven 31 City Enschede Country The Netherlands is hereby authorized to apply the following equipment for certification on our behalf: Product Description Digital Camcorder Type or Model(s) DV1100SA Tradename or Brand(s) N/A Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Shenzhen China 2011-9-14 Tony Pan Manager

External of EUT

Label Location Proposed Label Location on EUT

FCC ID Label FCC ID: XJNDV1100SA Model Number: DV1100SA Made in China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Internal of EUT

Product Diagram Information 1. Product function introduce DV1100 is a digital video camera ，playing audio and video in SD card，audio recorder。 2. Structure 1.44 TFT LCD Display ，0.3 Mega Pixels CMOS Sensor ，3.0 Mega Pixels（2048X1944）， 1.3 Mega Pixels（1280X1024），300K Pixels（640X480），D1(720X480) Pixels，@30fps， VGA（640X480）Pixels@30fps，QVGA （320X240）Pixels@30fps，SDRAM 4X16Mb （No storage function）&SPI 1MB ，SD/MMCSDHC up to 32GB，10s Self-Timer ，3Xaaa Power Source 2.1 Structure Introduce Internal Crystal Frequencies：27MHZ, 32.768MHZ 2.2 Powering 3*AAA BATTERY

SCALE: SHEET: OF REVISION RECORD DRAWN: DATED: DATED: CHECKED: QUALITY CONTROL: DATED: DATED: RELEASED: COMPANY: TITLE: DRAWING NO: A B C D DATE: 1 2 3 4 5 6 D C B A CODE: SIZE: REV: LTR ECO NO: APPROVED: MA2 : Boot from Serial Flash MA3 : Boot from NOR Flash MA4 : Boot ISP MA7 : GPIO[4:3] as UART MA2 MA3 MA4 0 0 1 (ISP) 1 0 0 ( Boot from NOR Flash) 0 0 0 ( Boot from Serial Flash) 1 2 LED1 LED 1 2 R22 510 1 2 R8 510 C25 0.1UF C23 0.1UF C19 0.1UF C40 0.1UF C43 0.1UF C44 0.1UF 1 2 R58 4.7K 1 2 R57 1K 1 2 M1 MIC 1 2 R10 3.6k 1 2 R12 1K 1 2 R16 1K C48 1UF C49 0.1UF C50 0.1UF C51 2200P 1 2 R21 10K 1 2 R31 10K 1 2 R32 NC 1 2 R3 1K 1 2 3 4 8 7 6 5 U14 JZ4890 C8 0.1UF 1 2 R43 3.6K C55 0.1UF 1 2 R45 39K C68 22UF C57 1UF 1 2 SP1 SPEAKER 1 2 R83 75 C60 1500P 1 2 R4 10K 1 2 R20 1K 1 2 R52 0 1 2 3 4 T6 4PIN 1 2 L11 2.7UH 1 2 R2 100K C11 0.1UF C14 0.01UF 1 2 R5 1K C15 0.01UF 1 2 R6 0 1 VSB5V 2 D- 3 D+ 4 GND J10 USB-4 96 AVSSXTAL 95 XTAL27I 94 XTAL27O 93 AVDDXTAL 92 AVSSTX 91 AVDDTX 90 DP 89 DM 88 AVSSRX 87 AVDDRX 86 REXT 85 COUT 84 RSET 83 AVSSDAC 82 LVDI 81 AVDDRTC 80 XTALRTCI 79 XTALRTCO 78 AVSSRTC 76 SAR2 75 SAR1 74 SAR0 72 MICINP 71 MICINN 70 MICBIAS 73 VREF 77 AVDDADC 69 DVDD 68 VSS 67 VD 66 HD 65 PCLK 64 OVDD 63 MCLK 62 I2C_SCK 61 I2C_SDA 60 RGB0 59 RGB1 58 RGB2 57 RGB3 56 RGB4 55 RGB5 54 RGB6 53 RGB7 52 RGB8 51 RGB9 50 DVDD 49 VSS 48 OVDD 47 MA3 46 MA2 45 MA1 44 MA0 43 MA10 42 MA13 41 MA12 40 RASNN 39 CASNN 38 MWENN 37 MA4 36 MA5 35 MA6 34 MA7 33 MA8 32 MA9 31 OVDD 30 MA11 29 MA14 28 CKE 27 SDCLK 26 UDQM 25 MD8 24 MD9 23 MD10 22 VSS 21 DVDD 20 MD11 19 MD12 18 MD13 17 MD14 16 MD15 15 LDQM 14 MD7 13 MD6 12 MD5 11 MD4 10 MD3 9 MD2 8 MD1 7 MD0 6 OVDD 5 VSS 4 GPIO0 3 GPIO1 2 GPIO2 1 DVDD 127 FMGPIO0 126 FMGPIO1 125 FMGPIO2 124 FMGPIO3 123 FMGPIO4 122 FMGPIO5 121 FMGPIO6 120 FMGPIO7 119 FMGPIO8 118 FMGPIO9 117 GPIO4 116 GPIO5 115 GPIO7 114 GPIO8 113 GPIO9 112 TESTMODE 111 OVDD 107 VSS 106 DVDD 110 DIGTV11 109 DIGTV10 108 DIGTV9 105 DIGTV8 104 DIGTV7 103 DIGTV6 102 DIGTV5 101 DIGTV4 100 DIGTV3 99 DIGTV2 98 DIGTV1 97 DIGTV0 128 GPIO3 U4 SPCA1527-128 SPCA1527-128 SPCA1527A-LQFP128 C:DOCUMENTS AND SETTINGSCS.LIN®à-±SP1KM_APPLICATION_V17_20090302(CAPTURE72).DSN 1 2 Y4 27M C47 22P C52 22P 1 2 R51 1M 1 2 R36 12.1K 1% 1 2 Y1 32.768K C39 22P C45 22P C1 22UF 1 2 D1 C5 22UF 1 2 R13 4.7 C9 22UF C13 0.1UF 1 2 D2 C10 0.1UF 1 2 R7 100K 1 2 R24 110K 1 OUT 2 VSS 3 VDD U9 SE809 RTC_CAP +3.3V_SYS RSET +1.8V_CORE +3.3V_SYS DP DM RXD0 MICINP MICINN +3.3V_SYS MA2 MA7 MA3 PWMDACA VO1 AV_PLUGB COUT VO2 V33A VO1 +3.3V_SYS VO2 SPKER_EN +3.3V_SYS RXD0 TXD0 +3.3V_SYS USB5V REXT GND RSET SPKER_EN AV_PLUGB MICINN VBAT_CHK AD_FOURWAY TFT_ON RXD0 TXD0 COUT RTC_CAP AD_FUNCKEY PWMDACA LVDI PWR_HOLD VREF MICINP RASNN UDQM MD11 MA4 MWENN SEN_RGB4 MD15 SEN_PCLK MA7 SEN_RGB5 FMGPIO0 SEN_RGB3 SEN_RGB2 CASNN MA0 SEN_RGB8 DDX1 MA12 MA10 MD1 DDX5 SD_CMD MD4 SEN_RGB9 MD5 MD7 SEN_RGB6 MD6 MD9 SEN_RGB7 MA11 MA13 SD_DAT3 MD8 SDCLK SD_DAT1 MD10 FMGPIO1 MD14 MD0 MD3 MA6 DDX3 DP DDX4 DM LDQM VSYNC FMGPIO3 DDX6 SD_DAT0 SEN_VD SEN_HD DDX0 MD13 I2C_SCK HSYNC SD_WPB I2C_SDA SD_CD MA1 FMGPIO2 MA9 SHUTTER_KEY SEN_MCLK CKE MD2 SD_DAT2 SD_CLK DIGTV11 DDX7 MA2 MA5 LCD_SEN MA8 DDX2 MA3 MD12 GND GND GND GND +3.3V_SYS +3.3V_SYS +1.8V_CORE +1.8V_CORE +3.3V_SYS +1.8V_CORE +3.3V_SYS +3.3V_SYS +1.8V_CORE +3.3V_SYS +3.3V_SYS +1.8V_CORE X2 X1 GND X1 X2 GND XTALRTCO XTALRTCI XTALRTCO XTALRTCI LED_BUSY +3.3V_SYS LCM_RESETB +3.3V_RTC +3.3V_SYS VREF LED_BUSY +3.3V_SYS LVDI +1.8V_CORE SCALE: SHEET: OF REVISION RECORD DRAWN: DATED: DATED: CHECKED: QUALITY CONTROL: DATED: DATED: RELEASED: COMPANY: TITLE: DRAWING NO: A B C D DATE: 1 2 3 4 5 6 D C B A CODE: SIZE: REV: LTR ECO NO: APPROVED: SPI FLASH MEMORY(Reserve) SDRAM C64 0.1UF C67 0.1UF VDD CD GND 12 9 1 2 10 3 4 5 6 7 8 11 13 15 14 J2 SDS020XAA 1 2 3 4 8 7 6 5 U8 MX25L8005 23 24 25 26 29 30 31 32 33 34 22 35 21 20 38 17 18 37 39 15 16 19 1 14 27 3 9 43 49 2 4 5 7 8 10 11 13 42 44 45 47 48 50 51 53 36 40 28 41 54 52 46 12 6 U13 4M X16 1 2 R46 22 1 2 R53 10K 1 2 R56 4.7 1 2 R72 10K C46 0.1UF C53 0.1UF C56 0.1UF C61 0.1UF 1 2 R82 10K 1 3 5 7 2 4 6 8 RP2 10K(NC) 1 2 R61 150 C16 10UF 2 3 1 U10 JZ-6206-2.8V C1A 22UF 1 2 R63 22 1 2 R29 4.7K 1 2 R59 4.7K C28 22P 1 2 R15 22 C2 D0 D3 D1 C3 D2 D4 D3 C5 D4 B3 D5 B5 D6 A5 D7 B4 SBCL A3 SBDA D5 RESETB B1 GND C1 VSYNC A4 HSYNC D2 INCLK C4 PCLK B2 PWDN D1 DVDD28 A2 VREF A1 AVDD25 U1 GC0309 1 2 R64 nc 1 2 R42 22 1 2 R26 22 1 2 R34 10K C54 0.1UF 1 2 R40 10K C36 0.1UF C37 0.1UF C41 0.1UF VAA_2V8 +3.3V_SYS MD0 MD1 MD2 MD3 MD4 MD5 MD6 MD7 MD8 MD9 MD10 MD11 MD12 MD13 MD14 MD15 +3.3V_SYS +3.3V_SYS SD_WPB SD_DAT1 SD_DAT0 SD_CMD SD_DAT3 SD_DAT2 +3.3V_SD +3.3V_SYS SD_CD MWENN SDCLK MA12 MA0 MA1 MA2 MA3 MA4 MA5 MA6 MA7 MA8 MA9 MA10 MA11 MA13 RASNN CASNN CKE UDQM LDQM +3.3V_SYS FMGPIO2 FMGPIO3 PWR_HOLD FMGPIO1 FMGPIO0 MD[0:15] SD_DAT3 FMGPIO1 FMGPIO0 +3.3V_SYS +3.3V_SD +3.3V_SYS SD_CLK +3.3V_SYS SEN_PCLK I2C_SDA I2C_SCK LCD_SEN SEN_RGB9 SEN_RGB8 SEN_RGB7 SEN_RGB6 SEN_RGB5 SEN_RGB4 SEN_RGB3 SEN_RGB2 GND GND SEN_MCLK VAA_2V8 VAA_2V8 SEN_HD SEN_VD I2C_SCK I2C_SDA left right up down MODE 0K SET 2 3 1 D3 BAT54C 1 2 R65 100K 1 2 R67 1K BC17 0.1UF 1 2 R69 10K 1 2 R75 10K 1 2 R78 51K 1 2 R86 200K1% 1 2 R87 270K1% C92 0.1UF 1 2 R30 10K 3 2 1 Q1 SI2301 1 2 R33 10K C58 22UF C3 0.1UF 3 2 1 Q6 SI2301DS 1 2 R49 10K C106 0.1UF 1 2 R50 10K 2 1 3 Q4 1 2 R17 1K 1 2 R18 1K 1 2 R19 0 1 2 R25 10K 1 2 R35 0 1 2 R37 0 1 2 R38 0 1 2 R39 10 C20 1UF 1 LED-K 2 LED-A 3 GND 4 VDD 5 TE 6 NC 7 /CS 8 /RST 9 RS 10 /WR 11 /RD 12 D7 13 D6 14 D5 15 D4 16 D3 17 D2 18 D1 19 D0 20 GND LCD1 LCM-18 1 2 S4 POWER(ON/OFF) 1 2 S7 1 2 S3 1 2 S1 1 2 R79 10K 1 2 R81 20K 1 2 R84 750 1 2 S5 1 2 S2 1 2 S6 1 2 S8 1 2 R60 10 1 2 R73 9.1K 1 2 R76 5K 1 2 R77 11K C21 0.1UF C34 0.047UF(NC) C38 0.047UF(NC) 1 2 R1 249K 1% 1 2 R11 56K 1% C22 22P C24 0.1UF C27 0.1UF C31 22UF 1 2 R55 1K C33 22UF 4 VIN 1 RUN 3 SW 5 VFB 2 GND U2 JZ7015 1 2 L1 4.7UH BC5 1UF 1 2 D7 IN5819 1 3 5 4 2 U5 JZ6306-1.8V 1 2 A1 0 1 2 B1 NC CT1 0.01UF 3 2 1 Q2 SI2301DS 1 2 R44 1.5K 1 2 D…

Text truncated - open the document above for the full version.

FCC ID: XJNDV1100SA SHENZHEN EMTEK CO., LTD. Report No.: ES110901002F Page 1 of 31 TEST REPORT For SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. Digital Camcorder Model No.: DV1100SA FCC ID: XJNDV1100SA Report Number : ES110901002F Date of Test : September 1, 2011 to September 13, 2011 Date of Report : September 14, 2011 Prepared for : SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. Address : NO.1 Shuoying Rd., Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Prepared by : SHENZHEN EMTEK CO., LTD. Address : Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China Tel: (0755) 26954280 Fax: (0755) 26954282 FCC ID: XJNDV1100SA SHENZHEN EMTEK CO., LTD. Report No.: ES110901002F Page 2 of 31 TABLE OF CONTENT Test Report Description Page 1. SUMMARY OF TEST RESULT ..................................................................................................... 4 2. GENERAL INFORMATION........................................................................................................... 5 2.1. Description of Device (EUT) ....................................................................................................... 5 2.2. Description of Support Device..................................................................................................... 6 2.3. Description of Test Facility .......................................................................................................... 7 2.4. Measurement Uncertainty ............................................................................................................ 7 3. MEASURING DEVICE AND TEST EQUIPMENT ..................................................................... 8 3.1. For Power Line Conducted Emission Measurement.................................................................... 8 3.2. For Radiated Emission Measurement(3m Chamber)................................................................... 8 4. POWER LINE CONDUCTED EMISSION MEASUREMENT .................................................. 9 4.1. Block Diagram of Test Setup ....................................................................................................... 9 4.2. Measuring Standard ..................................................................................................................... 9 4.3. Power Line Conducted Emission Limits (Class B) ..................................................................... 9 4.4. EUT Configuration on Measurement...........................................................................................9 4.5. Operating Condition of EUT...................................................................................................... 10 4.6. Test Procedure............................................................................................................................ 10 4.7. Measuring Results...................................................................................................................... 10 5. RADIATED EMISSION MEASUREMENT.................................................................................11 5.1. Block Diagram of Test Setup ..................................................................................................... 11 5.2. Measuring Standard ................................................................................................................... 11 5.3. Radiated Emission Limits (Class B) .......................................................................................... 12 5.4. EUT Configuration on Measurement......................................................................................... 12 5.5. Operating Condition of EUT...................................................................................................... 12 5.6. Test Procedure............................................................................................................................ 12 5.7. Measuring Results...................................................................................................................... 13 6. PHOTOGRAPHS............................................................................................................................ 14 6.1. Photos of Conducted Emission Measurement ........................................................................... 14 6.2. Photos of Radiation Emission Measurement ............................................................................. 15 APPENDIX I (2 Pages) APPENDIX II (6 Pages) APPENDIX III (Photos of EUT) (4 Pages) FCC ID: XJNDV1100SA SHENZHEN EMTEK CO., LTD. Report No.: ES110901002F Page 3 of 31 TEST REPORT DESCRIPTION Applicant : SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. Manufacturer : SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. EUT : Digital Camcorder Model No. : DV1100SA FCC ID : XJNDV1100SA Power Supply : 3*AAA Battery Measurement Procedure Used: FCC Rules and Regulations Part 15 Subpart B Class B October 2009 & FCC / ANSI C63.4-2009 The device described above is tested by SHENZHEN EMTEK CO., LTD. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and SHENZHEN EMTEK CO., LTD. is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of SHENZHEN EMTEK CO., LTD. Date of Test : September 1, 2011 to September 13, 2011 Prepared by : (Engineer) Reviewer : (Quality Manager) Approved & Authorized Signer : (Manager) FCC ID: XJNDV1100SA SHENZHEN EMTEK CO., LTD. Report No.: ES110901002F Page 4 of 31 1. SUMMARY OF TEST RESULT EMISSION Description of Test Item Standard & Limits Results Conducted Disturbance at Mains Terminals FCC P…

Text truncated - open the document above for the full version.

RADIATED EMISSION TEST CONDUCTED EMISSION TEST