XJNP0108Mobile Internet Device

0 Thank you for choosing thiproduct. MID P0108 Q uick Start Guide 1 Description of the device 1 Power button 2 Volume down 3 Volume up 4 Menu 5 Home button (Top) 6 Headphone Jack 7 DC Jack 8 USB Host 9 USB OTG 10 Mini HDMI port 11 MicroSD card slot 12 Speaker left 13 Speaker right 2 Starting up Before using your disgo for the first time, please charge the battery completely. Charging the battery a) Connect the supplied power cable to the Tablet 8100 power connector and the wall outlet. b) Please allow a minimum of 4 hours for a full charge of the battery. 14 Camera15 Microphone 16 Home button front 3On screen setup When the device starts up, you may be required to calibrate the screen. Please follow the onscreen instructions to complete the calibration. The main desktop screen will load when the calibration is complete. disgo tablet 8100 interface The disgo device uses a full touchscreen. All areas of the touchscreen will react when you tap on it with your finger. 4 Menu bar icons explained Home Touch on Home to return to the desktop. This action will not close the applications 5 that are open. Wi ‐ Fi Indicator Displays the connection status of the Wi ‐ Fi. Battery Indicator Shows the charge status of the battery. Time Indicator Shows current time Volume Down Decreases volume Volume Up Increases volume Menu Shows menu of the current open application on the bottom of the screen Back Returns to the previously viewed screen The menu bar will change depending on which screen is being displayed. Finding your way around After the start ‐ up procedure is complete, the tablet will show the Home screen (as below). 6 Slide your finger horizontally on the display to go to the left or right of the extended screen. 7Customising the Home screen To add a Home screen icon (shortcut, widget, etc), hold your finger on an empty area of the screen, then choose the required option from the drop ‐ down menu You can also touch the Menu icon, to add an icon as well as access the Settings menu, change the wallpaper and perform a Search on the device. The Application screen 8 The application screen can be accessed by pressing the application icon, on the Home screen. The Application screen gives access to all pre ‐ loaded and downloaded apps on the device, including Mail, Music and Video player, etc. Tap on any icon to open the corresponding application. You can get more Android applications from the GetJar market, which can be found on the Application screen. Connecting to the internet 9The Tablet 8100 connects to the internet over a Wi ‐ Fi network. If you have connected the device to a network previously, it will attempt to reconnect to the network. a) To configure a new Wi ‐ Fi connection, go to the Home screen, tap the Menu icon and then select Settings. b) In the Settings screen, select Wireless & Networks. c) If the Wi ‐ Fi is off, tap on the Wi ‐ Fi option to turn it on. The checkmark will be visible if the Wi ‐ Fi is already on. d) Select Wi ‐ Fi settings and tap on the available network you want to connect to. Enter the required pass code, if applicable and ta p Connect. You are now fully connected to your network and to the internet! Transferring media to your disgo Tablet 8100 10The Tablet 8100 will connect directly to your PC to allow file transfer. Please use the USB ‘OTG’ port, which is located beside the HDMI port. When connected, the PC will recognise any MicroSD card or USB drive which is attached to the Tablet. Also, media files can be transferred directly onto the MicroSD card. a) Remove the MicroSD ca rd with the Tablet 8100 powered off or use dismount procedure, see user manual at www.mydisgo.info/support b) Connect the MicroSD card to your computer and copy the relevant files. c) Replace the card to the MicroSD card slot. The copied files (images, music, video, etc) will appear in the relevant app, i.e. music files will appear in the music app, movies will appear in the video player , etc. External files can also be viewed on the device by connecting an external storage device via the USB adapter cable to the USB ‘Host’ port 11FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including inte rference that may cause undesired operation. CAUTION: changes or modifications not expressly appr oved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to co mply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential inst allation. This equipment generates, uses and can radiate radio frequency energy and, if not installe d and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interferen ce by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circu it different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF statement: The device has been eval uated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

External of EUT

FCC ID Label FCC ID: XJN P0108 Model Number: P0108 Made in China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Label Location Proposed Label Location on EUT

Internal of EUT Antenna WIFI module

SHENZHEN EMTEK CO., LTD. REPORT NO: ES111115068F-1 FCC ID: XJNP0108 DATE: 01/12/2012 Page 1 of 73 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF MID MODEL No.: P0108, P1099 FCC ID: XJNP0108 REPORT NO: ES111115068F-1 ISSUE DATE: January 12, 2012 Prepared for SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. NO.1 Shuoying Rd., Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Prepared by SHENZHEN EMTEK CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 SHENZHEN EMTEK CO., LTD. REPORT NO: ES111115068F-1 FCC ID: XJNP0108 DATE: 01/12/2012 Page 2 of 73 VERIFICATION OF COMPLIANCE Applicant: SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. NO.1 Shuoying Rd., Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Manufacturer: SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. NO.1 Shuoying Rd., Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Product Description: MID Model Number: P0108, P1099 (Note: Both models are the same, except their model number. We take P0108 to test.) File Number: ES111115068F-1 Date of Test: November 15, 2011 to November 22, 2011 We hereby certify that: The above equipment was tested by SHENZHEN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247. The test results of this report relate only to the tested sample identified in this report. Date of Test : November 15, 2011 to November 22, 2011 Prepared by : (Engineer) Reviewer : (Quality Manager) Approve & Authorized Signer : (Manager) SHENZHEN EMTEK CO., LTD. REPORT NO: ES111115068F-1 FCC ID: XJNP0108 DATE: 01/12/2012 Page 3 of 73 Ta b l e o f C o n t e n t s 1. GENERAL INFORMATION................................................................................................... 5 1.1 P RODUCT DESCRIPTION......................................................................................................... 5 1.2 R ELATED SUBMITTAL(S) / GRANT(S) ..................................................................................... 5 1.3 T EST METHODOLOGY............................................................................................................ 6 1.4 S PECIAL ACCESSORIES.......................................................................................................... 6 1.5 E QUIPMENT MODIFICATIONS................................................................................................. 6 1.6 T EST FACILITY...................................................................................................................... 6 2. SYSTEM TEST CONFIGURATION...................................................................................... 7 2.1 EUT CONFIGURATION........................................................................................................... 7 2.2 EUT EXERCISE...................................................................................................................... 7 2.3 T EST PROCEDURE.................................................................................................................. 7 2.4 C ONFIGURATION OF TESTED SYSTEM.................................................................................... 7 3. DESCRIPTION OF TEST MODES ........................................................................................ 9 4. SUMMARY OF TEST RESULTS ......................................................................................... 10 5. CONDUCTED EMISSIONS TEST....................................................................................... 11 5.1 M EASUREMENT PROCEDURE............................................................................................... 11 5.2 T EST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)....................................................... 11 5.3 M EASUREMENT EQUIPMENT USED...................................................................................... 11 5.4 C ONDUCTED EMISSION LIMIT............................................................................................. 11 5.5 M EASUREMENT RESULT...................................................................................................... 12 5.6 C ONDUCTED MEASUREMENT PHOTO.................................................................................. 13 6. RADIATED EMISSION TEST.............................................................................................. 14 6.1 M EASUREMENT PROCEDURE............................................................................................... 14 6.2 T EST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)....................................................... 14 6.3 M EASUREMENT EQUIPMENT USED...................................................................................... 15 6.4 R ADIATED EMISSION LIMIT................................................................................................. 15 6.5 M EASUREMENT RESULT...................................................................................................... 17 6.6 R ADIATED MEASUREMENT PHOTOS.................................................................................... 41 7. OCCUPIED BANDWIDTH TEST........................................................................................ 43 7.1 M EASUREMENT PROCEDURE............................................................................................... 43 7.2 T EST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)....................................................... 43 7.3 M EASUREMENT EQUIPMENT USED...................................................................................... 43 7.4 M EASUREMENT…

Text truncated - open the document above for the full version.

RADIATED EMISSION TEST CONDUCTED EMISSION TEST