XJNPI799MID

1 1. Description of appearance Product structural diagram: 2 Getting started Statement: our company ceaselessly devotes itself to the improvement product quality and software versions are updated continuously. If there are differences between the outgoing product and functions described in this instruction, please kind prevail. Thank you! 2.1 Battery charging The tablet palmtop computer is equipped with a built-in battery. System will suggest to charge when the battery is low. Power adapter Connect one end of the power adapter to a socket and the other end to the power jack of the device to charge the device. (Strongly recommended to use allocative power adapter from the company to avoid damage to the machine) Charging methods 1. Plug the power adapters, the charging indicator of the battery will turn red to 1.Camera 2.MIC 3.Return Key 4.Earphone 5.DC in 6.USB port 7.USB Port 8.HDMI port (Disable) 9.TF card slot 10 .POWER key 11.VOL- key 12.VOL+ key 13.MENU key 14.Home key 15.Speaker 16.Speaker 3 show that charging is in process. When the battery is full, the charging indicator goes out. 2. Users can still use tablet palmtop computer during charging. 2.2 Use of memory card Insert memory card: Insert the memory card into the card slot and press it into the card slot until hear the sound of "Click". A prompt will appear on the top left corner of the screen: The memory card is preparing. Browse the documents in the memory card: Run "My Pad" program. Display all files under the root directory and select "Memory Card 1" to open it to browse the content in the card. Pull out memory card: Close all the files opened from the card: click menu, select settings → internal memory of memory card device → memory card 1 → uninstall memory card. The system will prompt that “memory card has been safely removed": Gently press the card and it will popup a part. Then take it out: “memory card has been safely removed" will be prompted on the top left corner of the screen. Note: 1. The card should be inserted into correct position, otherwise it will be damaged; 2. Please do not forcibly pull out the card before the appearance of the prompt that "remove the memory card", lest that the car will be damaged; 3. Memory cards of main brands is suggested to be used to avoid the incompatibility of the card 4 2.3 Hot swapping between memory card and external USB flash disk Please do not carry out hot swapping when using or browsing files in memory card and external USB flash disk. Directly pull out memory card or external USB flash disk when browsing or using files in them in My Video, My Music, My Album and other softwares may damage the card and USB flash disk and they may automatically exit process for self-protection. Please refer to "2.2 Use of memory card” on insert and extract of memory card. Please close all files being used in the external USB flash disk before pulling it out. 2.4 Storage space The device has three storage spaces: internal storage of the device, USB flash disk and memory card. Internal storage of the device is not displayed; the displayed folder name of memory card is: "SD Card 1"; the displayed folder name of external USB flash disk is “USB Flash Disk 1”. System storage area can only be used for storing system files. The total internal storage space of the device is 4 GB. The storage space of USB flash disk and memory card is determined by their specific capacity. Please refer to 9.7 storage card and device storage for related specific information on storage. 2.5 ON OFF 1. Starting up: when the battery has sufficient electricity, long press the power key for 2 seconds to start up. Screen lock will be entered after starting up. Slide unlock icon upward to enter main interface; (slide it downward to turn off sound and slide it downward again to turn on sound) 5 2. Shutdown: Press the power key (4 seconds) and the system will popup shutdown confirmation interface. Slide the following shutdown icon upward to shut down, while slide the above shutdown cancel icon downward to return to the shutdown interface. 3. Hibernation: press the power key (1 second) and the system will enter hibernation state. The screen of LCD will turn black while hibernation. Press the power key can wake up the system under hibernation state and it will enter screen lock after being waked up. If low battery is happened under hibernation state, the device will shutdown after automatic staring up to save electricity. 2.6 Interface rotation The system interface can automatically rotate screen according to the direction of the device. The system interface will be displayed by vertical screen when hold endwise, while by horizontal screen when hold widthwise. The rotation time of the screen is within 2 seconds. Refresh the screen to make it return to normal state after switch. 2.7 External USB flash disk Insert USB flash disk to USB port by USB transfer line USB, as the following figure. USB flash disk can be used after connected to the device. Files can be copied between the device and memory card. 6 2.8 Network connection Wireless network: 1. Select "settings" icon under the shortcut bar of the desktop 2. Select "wireless network" in the Settings menu 3. Select check box behind WI-FI to open WI-FI 4. Select "WI-FI setting" option to set WI-FI network 5. All AP the device can search will be listed. Click the AP to be connected in the options 6. If the AP was successfully connected before, the information will be stored. Select "connection" in the window popping up to start connection, while select "forget" to eliminate AP information 7. If the AP is not encrypted, select "connection" in the window popping up to start connection. 8. If the AP is encrypted, input password in the window popping up and click "connection" to start connection 9. After success of network connection, WIFI icon will appear on the status bar on the top of the desktop 7 3. Input operations 3.1 Keyboard When you use procedures or files needing to input tex…

Text truncated - open the document above for the full version.

External Photos

Label Artwork and Location Label Size: 26*60mm FCC ID: XJNPI799 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Internal Photos

Technical Description The Equipment Under Test (EUT) is a MID with Wifi operating at 2.412-2.462GHz, 11 channels seletction separated by 5MHz channel spacing. The EUT can carry out the base function of PC. The device is powered by 1x3.7V rechargeable battery or AC 120V/60Hz via an external Adapter. Type of Modulation: CCK for 802.11b and OFDM for 802.11g/n. Antenna Type: Internal integral Antenna. Frequency List for 802.11b/g/n-20MHz: 2412MHz, 2417MHz, 2422MHz, 2427MHz, 2432MHz, 2437MHz, 2442MHz, 2447MHz, 2452MHz, 2457MHz, 2462MHz Frequency List for 802.11n-40MHz: 2422MHz, 2427MHz, 2432MHz, 2437MHz, 2442MHz, 2447MHz, 2452MHz Main IC Fuction: At MAIN PCB 1) U1(InfoTM IMAP441) is CPU with varied function such as Control Unit, Arithmetic Logic Unit. 2) U4, U5, U7, U8 are DDR2 SDRAM. 3) U36, U42 are flash memory. 4) U18 is HDMI decode IC which is disable. 5) U24 is audio decode IC. 6) U6 is G-Sensor. 7) U29 is rechargeable IC. 8) U15, U21, U23 are LDO regulators. 9 ) U9, U10, U12, U16, U19, U20 are DC/DC regulators. 10) U3 is touch IC. 11) U28 is forced Power-Off action when long-time press power-key. 12 ) X2 is oscillator for U1 main frequency. 13) Y2 is oscillator for U1 RTC frequency. WiFi board: 1) U2 is WiFi chip which generate the RF signal. 2) XTAL1 is OSC for U2.

INTERTEK TESTING SERVICES Radio Frequency Radiation Exposure, FCC Rule 15.247(i): The EUT is a Mini PC with WiFi unit used in portable application, less than 20 cm from any body part of the user or near by persons. The power thresholds for source-based time-averaging Conducted output power (in the worst-case 802.11n-20M 2412MHz) = 12.8dBm And SAR Low Threshold Level: 60/f (GHz) = 60/2.45 = 24.5mW = 13.9dBm Since 12.8dBm is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing. FCC ID: XJNPI799

55 44 33 22 11 D D C C B B A A RTL8188CU 1T1R USB 1V0 90ohm UD88C00_1V0 initial 20090922 WPS CONFIGURE TX2G_PAON[0] VD12D_LDO VD33USB REXT VD33PA[0] VD15R[1] VD33RVD33A VD33SPS VDD33 XO VD15A TX2G_PAOP[0] VDD33 VDD33 VDD33 VDD33 GPIO2 GPIO5 GPIO7 XI VD33A GPIO6 VD12A VD25P VD12S HSDPHSDM LED_0LED_1 VD15R[1] GPIO2 GPIO4 VD15R[0] VD15R[0] VD15D VD33PA[0] VD33PA[0] VDD33 HSDPHSDM VDD33 Tit leSize Document Number Rev Date: Sheet of <Doc> <RevCode> C 11 Monday, October 17, 2011 Tit leSize Document Number Rev Date: Sheet of <Doc> <RevCode> C 11 Monday, October 17, 2011 Tit leSize Document Number Rev Date: Sheet of <Doc> <RevCode> C 11 Monday, October 17, 2011 C410pFC410pF C310pFC310pF C311uFC311uF L9NCL9NC C23100pFC23100pF C300.1uFC300.1uF C810pFC810pF L36.8nHL36.8nH R90RR90R L310RL310R R22 0.8pF R22 0.8pF R2324KR2324K R50RR50R R16100KR16100K C121.1pFC121.1pF C191uFC191uF C92.7pFC92.7pF CON3A USB_A-PLUG CON3A USB_A-PLUG 4 4 3 3 2 2 1 1 G 5 NC 6 C3322pFC3322pF RTL8188CU QFN46 U2 RTL8188CU QFN46 U2 PAPE[0] 46 RX2G_IP[0] 6 VD15R[0] 5 TX2G_PAON[0] 3 TX2G_PAOP[0] 4 VD33PA[0] 2 TRSWP[0] 1 VD15R[1] 8 LED1 / ANT_SEL_N 11 LED0 / ANT_SWL_P 10 VD33A 12 RETX 13 VD15A 14 VD12A_LDO 15 XI 16 XO 17 CK_BT_40M/DA6 18 GNDS 28 GPIO[9] 33 WL_RX/GPIO[1] 21 GPIO[2]/BT_STAT 22 GPIO[3]/BT_PRI 23 NC 19 VD12D_LDO 25 VD25P 27 VD15D 26 GPIO[11]/PDN 24 VD12S_LDO 29 HSDP 30 HSDM 31 V33USB 32 WL_ACT/GPIO[0] 20 TRSWN[0] / LED2 34 VD33IO 35 VDSPS33 36 LX_SPS0 37 GND_SPS0 38 VD12D 39 BT_Suspend 41 GPIO[5] 42 EEDO 43 EEDI 44 EESK 45 VD33R 9 RX2G_IN[0] 7 GND_D 40 L26.8nHL26.8nH C200.1uFC200.1uF C1022pFC1022pF C252n7FC252n7F C1610pFC1610pF R13NCR13NC R260RR260R C110uFC110uF L62.7nHL62.7nH R10RR10R R212.7nHR212.7nH C222uFC222uF C241uFC241uF ANT1ANT1 ANT_IN 1 NC 2 C181.8nHC181.8nH L510nHL510nH L72.7nHL72.7nH R40RR40R C131.2pFC131.2pF R30RR30R C291uFC291uF C1510pFC1510pF C221.8nHC221.8nH R15NCR15NC XTA L 140MHzXTA L 140MHz XT AL P 1 GND 4 XT AL P 3 GND 2 R12NCR12NC R8NCR8NC C142.7pFC142.7pF R70R70 R14NCR14NC R34 10K R34 10K C171uFC171uF C260.1uFC260.1uF R280RR280R C510uFC510uF L42.7nHL42.7nH R290RR290R R1127pFR1127pF R25NCR25NC C60.1uFC60.1uF SW1SW1 2 1 U20TPU20TP 1 1 R20RR20R C36 1uF C36 1uF C110.7pFC110.7pF L16.8uHL16.8uH C3222pFC3222pF C71.2pFC71.2pF C67 10nF C67 10nF T23 HEADERT23 HEADER 123 C27 4.7nF C27 4.7nF L83.3nHL83.3nH U21TPU21TP 1 1 C351uFC351uF CON1marata connectorCON1marata connector IN 1 OUT 2 GND 3 GND 4 GND 5 GND 6 3')  SGI)DFWRU\3UR  ZZZILQHSULQWFQ

 Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com Nov 28, 2011 SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. NO.1 Shuoying Rd., Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Dear Tony Pan: Enclosed you will find your file copy of a Part 15 report (FCC ID: XJNPI799). For your reference, TCB will normally take another one week for reviewing the report. Approval will then be granted when no query is sorted. Please contact me if you have any questions regarding the enclosed material. Sincerely, Shawn Xing Manager Enclosure  • The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. TRF no.: FCC 15C_Txa FCC ID: XJNPI799 Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. Application For Certification MID (WiFi Transceiver) (FCC ID: XJNPI799) Model: PI799 SZ11100013-1 Billy Li Nov 28, 2011 INTERTEK TESTING SERVICE TRF no.: FCC 15C_TXa FCC ID: XJNPI799 i LIST OF EXHIBITS INTRODUCTION EXHIBIT 1: Summary of Tests EXHIBIT 2: General Description EXHIBIT 3: System Test Configuration EXHIBIT 4: Measurement Results EXHIBIT 5: Equipment Photographs EXHIBIT 6: Product Labeling EXHIBIT 7: Technical Specifications EXHIBIT 8: Instruction Manual EXHIBIT 9: Miscellaneous Information EXHIBIT 10: Test Equipment List INTERTEK TESTING SERVICES TRF No.: FCC 15C_TXa FCC ID: XJNPI799 ii MEASUREMENT/TECHNICAL REPORT SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. - MODEL: PI799 FCC ID: XJNPI799 This report concerns (check one) Original Grant X Class II Change Equipment Type: DTS - Part 15 Digital Transmission Systems (WiFi transmitter portion) Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until : date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator - the new 47 CFR [10-01-10 Edition] provision. Report prepared by: Shawn Xing Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, Block D, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Phone: (86 755) 8601 6288 Fax: (86 755) 8601 6751 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TXa FCC ID: XJNPI799 iii Table of Contents 1.0 Summary of test results .............................................................................. 2 2.0 General Description................................................................................................4 2.1 Product Description ....................................................................................... 4 2.2 Related Submittal(s) Grants .......................................................................... 5 2.3 Test Methodology.......................................................................................... 5 2.4 Test Facility ................................................................................................... 5 3.0 System Test Configuration ................................................................................. 7 3.1 Justification ................................................................................................... 7 3.2 EUT Exercising Software............................................................................... 7 3.3 Details of EUT and Description of Peripherals............................................... 8 3.4 Measurement Uncertainty.............................................................................. 8 3.5 Equipment Modification ................................................................................. 8 3.6 Support Equipment List and Description....................................................... 9 4.0 Measurement Results.......................................................................................... 11 4.1 Maximum Conducted Output Power at Antenna Terminals.......................... 11 4.2 Minimum 6dB RF Bandwidth ....................................................................... 13 4.3 Maximum Power Density ................................................................................15 4.4 Out of Band Conducted Emissions ...............................................................19 4.5 Out of Band Radiated Emissions ................................................................. 20 4.6 Transmitter Radiated Emissions in Restricted Bands................................... 2…

Text truncated - open the document above for the full version.

Plot: B2A1 Plot: B2B1 Plot: B2C1 Plot: G2A1 Plot: G2B1 Plot: G2C1 Plot: N2A1-20M Plot: N2B1-20M Plot: N2C1-20M Plot: N2A1-40M Plot: N2B1-40M Plot: N2C1-40M

Plot: B3A1 Plot: B3B1 Plot: B3C1 Plot: G3A1 Plot: G3B1 Plot: G3C1 Plot: N3A1-20M Plot: N3B1-20M Plot: N3C1-20M Plot: N3A1-40M Plot: N3B1-40M Plot: N3C1-40M

Plot: B4A1 Plot: B4A2 Plot: B4B1 Plot: B4B2 Plot: B4C1 Plot: B4C2 Plot: B4D1 Plot: B4D2 Plot: G4A1 Plot: G4A2 Plot: G4B1 Plot: G4B2 Plot: G4C1 Plot: G4C2 Plot: G4D1 Plot: G4D2 Plot: N4A1-20M Plot: N4A2-20M Plot: N4B1-20M Plot: N4B2-20M Plot: N4C1-20M Plot: N4C2-20M Plot: N4D1-20M Plot: N4D2-20M Plot: N4A1-40M Plot: N4A2-40M Plot: N4B1-40M Plot: N4B2-40M Plot: N4C1-40M Plot: N4C2-40M Plot: N4D1-40M Plot: N4D2-40M

Radiated Photos

Conducted Photos