XJNU0101UMPC

1 1. Description of appearance Product structure: Earphone DC in USB port USB port HDMI port SD card slot OTG port thernetport Power key Touch panel Speaker 2 Get ready Statement: This Company is committed to continuous improvement of product quality, and the software version will be updated from time to time. In case of any functional inconsistency of finally delivered products with the description in this manual, please refer to the finally delivered products. Thank you for your understanding! 2.1 Battery charging The pad has a built-in battery. Charging will be recommended by the system when the battery level is low. Power adapter One end of the adapter is connected to an outlet, and the other end to the pad’spowerjack,to charge the device.(It is strongly recommended to use the power adapter supplied to avoid damage.) Charging method: 1. Plug in power adapter, and the battery charging indicator turns red, indicating the battery is being charged. When the battery is fully charged, the indicator shows green. Plug out the adapter and the indicator will extinguish. 2. During charging, the user may still use the pad. 2.2 Use of storage card Insert storage card: Indicator for direction key Caps indicator Indicator for numeric key Working indicator Charging indicator WIFI indicator 3 Insert the storage card into the slot, and press the card into it with a finger until a click is heard. The top left of the screen will read: Preparingstorage card. Browse the files on the storage card: Start“My pad”procedure to show all files under the root directory. Select“Storage ca rd 1”and open it to browse the contents of the card. Draw thestoragecard: Close all files opened on the card. Click menu to select“Setting–Internal storage of the storage device–Storage ca rd 1–Unload the storage card”, and the system will pop up a prompt:“The storagecard removed successfully”. Press it lightly to bounce a portion of the card, and then take it out of the slot. The top left of the screen will read“The storage card removed successfully”. Precautions: 1. The card shall be inserted into right position, or it may be damaged; 2. Please do not forcedly draw the storage card from slot without“unloading thestoragecard”, to avoidany damages to the card; 3. It is recommended to use the storage cards of main brands, to avoid incompatibility of cards. 2.3 Hot plugging of the storage card and external USB disk Please do not hot plug the storage card or external USB disk while using or browsing the files on them. Directly plugging out of the storage card or external USB disk whose files are being browsed or used in such software as My video, My music and My photos may damage the card and disk, and may also automatically exit the procedure for the purpose of self-protection. For the plugging of the storage card, please refer to“2.2 Use of storage card”. Close all files being used before plugging out of the external USB disk. 2.4 Storage space The device has three storage spaces: internal memory, USB disk and storage card. The device’s internal storage will not be displayed; the file name of the storage card displayed is“SDcard 1”; and the file names of the external USB disk are“USB 1”and“USB 2”. The storage space for the system is used for storing system files only; the total internal storage space is 4B; and the space of USB disk and storage card depends on their capacity, with 32GB at most. For specific information about memory, please refer to 8.7 Storage card and device storage. 2.5 Start-up and shutdown 1.St a r t- u p: When the battery power is sufficient, press and hold the power key for 2 seconds to start up the device. After start-up, enter main interface directly; 2.Shutdown: Press and hold the power key (for 4 seconds) and a shutdown confirmation interface will pop up. 4 Click“Power off”toshutdownthedevice.PressESCkeytoreturntooperationinterfacefor further use. Click“Silent mode” to enter silent mode or close silent mode. 3.Sleep: Press and hold the power key (for 2 seconds) to enter sleep status, where the LCD will dim out. Under sleep status, press the power key to wake it up. If the battery level is very low under sleep status, the device will shutdown automatically after start-up for saving energy. 3. Input operation 3.1 Keyboard While using procedures or files that require input text and numbers, you may use the keyboard to input them. Note: The device supports external USB keyboard, but some keys may fail to work when you use such external USB keyboard. 3.2 Touch panel The touch panel can sense the moves of your fingers. Following operations are available: Note: Please do not place any object on the surface of the touch panel, for it may scrape or press the panel. Click: Select an icon, and click the left mouse key to choose a desired icon or item. Press and hold: Select an icon, and press and hold the left mouse key to choose the icon. You may also drag it down to the shortcut bar on the bottom of the desktop for display. Drag: You may drag an icon on the desktop to move among different pages within target interface. You may also drag the application procedure icon to the shortcut bar. 3.3 Mouse The device supports external USB mouse. When the USB mouse was inserted, you may click, select, drag, slide and right click to pop up the function menu. 4. Desktop 5 4.1 Status bar The top of the screen is status bar. There is a software button on the left of the status bar, and another 6 on the right. They are Homepage button, Manual refresh button, Screen capture button, Volume +/- button, Menu button, and Return button. The status bar also displays system information including 3G signal intensity, WI-FI signal intensity, Ethernet status, battery status, and time. 4.2 Main interface The main interface procedure of the pad includes two modes: desktop widget mode and application procedure icon mode, which may be switched through the button of the shortcut center. The main interface of the desktop widget mode is shown as…

Text truncated - open the document above for the full version.

External of EUT

Label Location Proposed Label Location on EUT

SHENZHEN EMTEK CO., LTD. REPORT NO: ES111115067F FCC ID: XJNU0101 DATE: 11/23/2011 Page 1 of 73 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF UMPC MODEL No.: U0101 FCC ID: XJNU0101 REPORT NO: ES111115067F ISSUE DATE: November 23, 2011 Prepared for SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. NO.1 Shuoying Rd., Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Prepared by SHENZHEN EMTEK CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 SHENZHEN EMTEK CO., LTD. REPORT NO: ES111115067F FCC ID: XJNU0101 DATE: 11/23/2011 Page 2 of 73 VERIFICATION OF COMPLIANCE Applicant: SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. NO.1 Shuoying Rd., Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Manufacturer: SHUOYING INDUSTRIAL (SHENZHEN) CO., LTD. NO.1 Shuoying Rd., Hebei Industry Area, Dalang, Longhua Town, Baoan, Shenzhen, China Product Description: UMPC Model Number: U0101 File Number: ES111115067F Date of Test: November 15, 2011 to November 22, 2011 We hereby certify that: The above equipment was tested by SHENZHEN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247. The test results of this report relate only to the tested sample identified in this report. Date of Test : November 15, 2011 to November 22, 2011 Prepared by : (Engineer) Reviewer : (Quality Manager) Approve & Authorized Signer : (Manager) SHENZHEN EMTEK CO., LTD. REPORT NO: ES111115067F FCC ID: XJNU0101 DATE: 11/23/2011 Page 3 of 73 Ta b l e o f C o n t e n t s 1. GENERAL INFORMATION................................................................................................... 5 1.1 P RODUCT DESCRIPTION......................................................................................................... 5 1.2 R ELATED SUBMITTAL(S) / GRANT(S) ..................................................................................... 5 1.3 T EST METHODOLOGY............................................................................................................ 6 1.4 S PECIAL ACCESSORIES.......................................................................................................... 6 1.5 E QUIPMENT MODIFICATIONS................................................................................................. 6 1.6 T EST FACILITY...................................................................................................................... 6 2. SYSTEM TEST CONFIGURATION...................................................................................... 7 2.1 EUT CONFIGURATION........................................................................................................... 7 2.2 EUT EXERCISE...................................................................................................................... 7 2.3 T EST PROCEDURE.................................................................................................................. 7 2.4 C ONFIGURATION OF TESTED SYSTEM.................................................................................... 7 3. DESCRIPTION OF TEST MODES ........................................................................................ 9 4. SUMMARY OF TEST RESULTS ......................................................................................... 10 5. CONDUCTED EMISSIONS TEST....................................................................................... 11 5.1 M EASUREMENT PROCEDURE............................................................................................... 11 5.2 T EST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)....................................................... 11 5.3 M EASUREMENT EQUIPMENT USED...................................................................................... 11 5.4 C ONDUCTED EMISSION LIMIT............................................................................................. 11 5.5 M EASUREMENT RESULT...................................................................................................... 12 5.6 C ONDUCTED MEASUREMENT PHOTO.................................................................................. 13 6. RADIATED EMISSION TEST.............................................................................................. 14 6.1 M EASUREMENT PROCEDURE............................................................................................... 14 6.2 T EST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)....................................................... 14 6.3 M EASUREMENT EQUIPMENT USED...................................................................................... 15 6.4 R ADIATED EMISSION LIMIT................................................................................................. 15 6.5 M EASUREMENT RESULT...................................................................................................... 17 6.6 R ADIATED MEASUREMENT PHOTOS.................................................................................... 41 7. OCCUPIED BANDWIDTH TEST........................................................................................ 43 7.1 M EASUREMENT PROCEDURE............................................................................................... 43 7.2 T EST SET-UP (BLOCK DIAGRAM OF CONFIGURATION)....................................................... 43 7.3 M EASUREMENT EQUIPMENT USED...................................................................................... 43 7.4 M EASUREMENT RESULTS.................................................................................................…

Text truncated - open the document above for the full version.

RADIATED EMISSION TEST CONDUCTED EMISSION TEST