XLG-F7404-port RFID Smart Reader

User’s Manual v1.0.0.0 F740 A/2013 www.favite.com Copyright○ C 2013, Favite, Inc [鍵入文字] 2 v2.2.1.0, Copyright○ C 2013, Favite, Inc Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 22cm between the radiator & your body. Professional installation instruction 1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change thesetting. 2. Installation location [鍵入文字] 3 v2.2.1.0, Copyright○ C 2013, Favite, Inc The product shall be installed at a location where the radiating antenna can be kept 22cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. 3. External antenna Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC limit and is prohibited. 4. Installation procedure Please refer to user’s manual for the detail. 5. Warning Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty. F740 User Guide i v2.2.1.0, Copyright○ C 2013, Favite, Inc Table of Contents 1. Introduction ........................................................................................................... 1 1.1 Overview .......................................................................................................... 1 1.2 Requirement...................................................................................................... 1 1.3 Reference Documents ....................................................................................... 2 1.4 Specifications.................................................................................................... 3 2. Reader Hardware Installation and Operation ........................................................ 8 2.1 Receiving the RFID Reader .............................................................................. 8 2.2 Diagnostic LEDs............................................................................................. 10 2.3 Antenna Panel ................................................................................................. 12 2.4 Demonstration Software Guide ...................................................................... 12 Figures Figure 1: F740 Reader Physical Size Figure 2: F740 Reader I/O Terminal Figure 3: Antenna Port Terminal Interface Figure 4: F740 GPIO Pin definition and I/O description Figure 5: F740 (1) Figure 6: F740 (2) Figure 7: F740 Power Supply and Adapter cable Figure 8: F740 Reader Diagnostic LEDs Figure 9: Demo Program F740 User Guide ii v2.2.1.0, Copyright○ C 2013, Favite, Inc Tables Table 1: Reference Documents ...................................................................................... 2 Table 2: Specification of the F740 ................................................................................. 3 F740 User Guide 1 v2.2.1.0, Copyright○ C 2013, Favite, Inc 1. Introduction This user’s manual guide is providing instruction for installing and operating the F740 RFID reader. This document is designed for use by RFID system integrators and software developer who develops relatively program and extended systems that take full advantage of the RFID Reader's capabilities. 1.1 Overview F740, one of FAVITE RFID reader family, is an Intel ATOM CPU based smart reader. The F740 is embedded with Impinj R2000 chip and following EPC Class1 Gen2 Dense Reader mode (DRM) / ISO 18000-6C. The F740 is equipped with 4 TNC RF antenna ports which could support 4 mono-static antennas that could support to the richest enterprise applications. With the powerful combination of TI ARM9 and 1GB memory, the F740 is the smartest RFID reader available and capable of running complex RFID applications. The RFID Reader is delivered with the following components and accessories:
One (1) RFID Reader.
One (1) power supply and cord.
Operation system:…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6 Page 7

Label Location

Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15

FCC ID: XLG-F740 Report No.: RF 140617C25 Operational Description This device is a 4-port RFID Smart Reader. The transmitter of the EUT is powered by 19Vdc from power adapter. The antenna is Patch antenna with N Type antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA130726C13A 1 of 5 Report Format Version 5.0.0 Reference No.: 130726C13, 140617C25 RF EXPOSURE REPORT REPORT NO.: SA130726C13A MODEL NO.: F740 FCC ID: XLG-F740 RECEIVED: Jul. 26, 2013 TESTED: Aug. 09 ~ Sep. 17, 2013 ISSUED: Jun. 18, 2014 APPLICANT: Favite Inc. ADDRESS: No. 176, Taihe Rd, Jhubei City, Hsinchu County, 302, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. Report No.: SA130726C13A 2 of 5 Report Format Version 5.0.0 Reference No.: 130726C13, 140617C25 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 3 1. CERTIFICATION ............................................................................................................................ 4 2. RF EXPOSURE LIMIT ................................................................................................................... 5 3. MPE CALCULATION FORMULA .................................................................................................. 5 4. CLASSIFICATION.......................................................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ................................................ 5 Report No.: SA130726C13A 3 of 5 Report Format Version 5.0.0 Reference No.: 130726C13, 140617C25 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130726C13A Original release Jun. 18, 2014 Report No.: SA130726C13A 4 of 5 Report Format Version 5.0.0 Reference No.: 130726C13, 140617C25 1. CERTIFICATION PRODUCT: 4-port RFID Smart Reader MODEL NO.: F740 BRAND: FAVITE APPLICANT: Favite Inc. TESTED: Aug. 09 ~ Sep. 17, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: F740) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Jun. 18, 2014 Ivy Lin / Specialist APPROVED BY : , DATE :Jun. 18, 2014 Ken Liu / Senior Manager Report No.: SA130726C13A 5 of 5 Report Format Version 5.0.0 Reference No.: 130726C13, 140617C25 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 22cm away from the body of the user. So, this device is classified as Mobile Device. 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 902.75~927.25 29.59 5.85 22 0.575 0.602

Report No.: RF130726C13A 1 of 45 Report Format Version 5.0.0 Reference No.: 130726C13, 140617C25 FCC TEST REPORT REPORT NO.: RF130726C13A MODEL NO.: F740 FCC ID: XLG-F740 RECEIVED: Jul. 26, 2013 TESTED: Aug. 09 ~ Sep. 17, 2013 ISSUED: Jun. 18, 2014 APPLICANT: Favite Inc. ADDRESS: No. 176, Taihe Rd, Jhubei City, Hsinchu County, 302, Taiwan (R.O.C.) ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130726C13A 2 of 45 Report Format Version 5.0.0 Reference No.: 130726C13, 140617C25 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 4 1. CERTIFICATION ............................................................................................................ 5 2. SUMMARY OF TEST RESULTS .................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY .................................................................................. 6 3. GENERAL INFORMATION ............................................................................................. 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................... 7 3.2 DESCRIPTION OF TEST MODES ................................................................................. 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................. 9 3.3 DESCRIPTION OF SUPPORT UNITS .......................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................. 12 4. TEST TYPES AND RESULTS ...................................................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ....................................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................... 13 4.1.2 TEST INSTRUMENTS .................................................................................................. 14 4.1.3 TEST PROCEDURES .................................................................................................. 15 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................ 15 4.1.5 TEST SETUP ................................................................................................................ 16 4.1.6 EUT OPERATING CONDITIONS ................................................................................. 16 4.1.7 TEST RESULTS ........................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................... 23 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................................. 23 4.2.2 TEST INSTRUMENTS .................................................................................................. 23 4.2.3 TEST PROCEDURES .................................................................................................. 24 4.2.4 DEVIATION FROM TEST STANDARD ........................................................................ 24 4.2.5 TEST SETUP ................................................................................................................ 24 4.2.6 EUT OPERATING CONDITIONS ................................................................................. 24 4.2.7 TEST RESULTS ........................................................................................................... 25 4.3 NUMBER OF HOPPING FREQUENCY USED ............................................................ 31 4.3.1 LIMIT OF HOPPING FREQUENCY USED ................................................................... 31 4.3.2 TEST SETUP ................................................................................................................ 31 4.3.3 TEST INSTRUMENTS .................................................................................................. 31 4.3.4 TEST PROCEDURES .................................................................................................. 31 4.3.5 DEVIATION FROM TEST STANDARD .................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST