XMF-AVXMTG10URoof Mount Monitor with DVD

Instruction Manual 1 1 2 5 7 11 15 TABLE OF CONTENTS An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information , system control , rear or side observation or navigation . if the LCD panel or video monitor is used for television reception , video or DVD play , the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicles parking brake is applied . An LCD panel and/or video monitor used for television reception , video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver seat where it will not be visible , directly or indirectly , to the operator of the motor vehicle . Do not use any solvents or cleaning materials when cleaning the video monitor. Do not use any abrasive cleaners , they may scratch the screen. Use only lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in fully closed position when not in use. Before putting on headphones always adjust the volume setting to off or lowest position Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended , as the dome lights , if left on , can drain the vehicle battery Do not put pressure on the screen . Caution children to avoid touching or scratching the screen , as it may become dirty or damaged . For safety reasons , when changing video media it is recommended that the vehicle is not in motion , and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system . System adjustments can be accomplished using the remote control , while seat-belts remain fastened . Important Notice Warnings Safety precaution * When connecting power and ground in a mobile video installation , insure that ACC wire is fused at the point where it is connected to the vehicle ACC wiring. Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point and the mobile video product . Important Notice Front view Function descriptions Settings and adjustments Source feature Installation Guide 32 10 ” TFT LCD (TFT) monitor Built-in DVD Player Selectable(M1 and M2) IR Receive and Transmit Codes Multi-Lingual OSD (On Screen Display) for Control of Picture Quality and Functions Audio\Video Source Inputs Dome Lights with Built-in Three Way Switch Last Memory for DVD Built-in 16 Channel Frequency Wireless FM Modulator EARphone Jack Screen Mode Selection(16:9 , 4:3) Backlit Controls Day\Night Picture Modes AV\Output USB/SD support CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) FEATURES 1 Dome Lights Provide additional interior illumination . 2 STOP This button is used to stop playback. 3 SCREEN MODE Wide (16:9) , Normal (4:3 )and display off 4 EJECTButton This Button is used for ejecting discs from the disc compartment . 5 FMM Used to select the frequentcy in sequence rotaion : FM OFF, CH 1 88.1MHz, CH2 88.3MHz, CH 3 88.5MHz, CH4 88.7MHz, CH 5 88.9MHz, CH6 89.1MHz, CH 7 89.3MHz, CH8 89.5 MHz CH 9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, CH15 90.9MHz, CH16 91.1MHz, 6 POWER Used to turn the system on/off. 7 PRESS Press this button to TFT LCD open monitor. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to optimize the picture quality. 8 PLAY\PAUSE( ) This button is used to start playback and pause to disc. 9 VOLUME(-) To decrease the volume of wired headphones and decrease the level of selected picture controls 10 PIC Allows the user to enter the picture adjustment mode 11 VOLUME( ) To increase the volume of wired headphones and decrease the level of selected picture controls 12 SOURCE Use to select one of the sources: DVD VIDEO1,VIDEO2, MEDIA. 13 Ventilation Openings 14 LCD cut off switch 15 LCD Panel 16 Wireless Headphones Transmit . 17: Remote control window CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 1 Three Position Dome Light Switch ON-Turn on the dome lights OFF-The dome Lights will not turn on in this position AUTO-Automatically switches on the dome lights in conjunction with the vehicle interior illumination. 2 SD Card Reader Sustain SD Card \MMC . 3USB 2.0 INPUT FOR USB PEN DRIVE 1234567891011121 13 14 15 1 2 3 16 17 1 2 CR2025CR2025 54 1 DISC indicator light 2 DVD Disc insertion slot CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 1 REMOTE CONTROL WINDOW 2. AV IN Jack 3. Headphone Jack Remote CONTROL OPERATION Before attempting to operate your Remote Control , install the batteries as described ibid . Function descriptions 1 2 4 6 3 5 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 1: POWER Button press this button to turn the unit ON and OFF 2:NUMBER Button Allow the user to enter numbers 0to 9 for selection of selection of CD tracks , DVD chapters , password setting 3 PREVIOUS\CURSOR GO the previous chapter or track . cursor use to menu selections on the screen. 4 MENU Button Allows the user to access the DVD(DVD MODE) 5 OK Button(ENTER) Used to implement a selected setting or menu option 6 SCAN BACKWARD\CURSOR( ) Scan backward at 2.4.8.16 or 4 times speed . cursor use to menu selections on the screen. 7 PLAY\PAUSE( ) This button is used to start playback and pause to disc. 8 NEXT \CURSOR GO the next chapter or track . cursor use to menu selections on the screen. / / / 2 1 1 23 30 6 7 9AB Allow user repeat the playback from point A to point B . Once Repeat A- Mark the beginning of the section to repeat ( Set point A ) Twice Repeat AB Mark the end of the section repeat (Set point B) 3 times AB off Cancel the A-B repeat function . 10 REPEAT Allows the user to repeat a selected title , chapter , or track . For MP3 disc, press “repeat” to repeat playing present file; press it again to repeat playing the folde…

Text truncated - open the document above for the full version.

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

Made in China To 2-Pin 132-7722 Connector 6-Pin Harness Inspected By : RED BLACK POWER +12v (SW) POWER GROUND 150 Marcus Blvd., Hauppauge, NY 11788 Technical Assistance: 1-800-225-6074 MODEL No.: AVXMTG10U ELECTRONICS CORP . ® LAMP-AUTO VIO BLK LAMP-COMMON RED LAMP-ON Signal Name Color Licensed under one or more of the following patents, P atent NOS. 5,775,762 , 5,927,784 and 6,678,892 This device complies with FCC Rules Part 15. Operation is subject to the following two conditions : (1) This device may not cause harmful interference and (2) This device must accept any interference that may be received, including interference that may cause undesired operation. FCC ID :XMF-AVXMTG10U FCC Certification label Sample

FCC Certification Label Location Sample Label location

Antenna

Applicant：Lightcomm Technology Co., Ltd. FCC ID：XMF-AVXMTG10U Operation Description FM transmission is achieved by MTK IC MT1389P to control ROHM IC BH1411 via interface I2C. Its working voltage is 3.3 V. Oscillator frequency is 16 MHz. There are 16 frequencies of transmission. IC BH1411 has functions of audio stereo modulation and RF modulation, the RF stability is controlled by internal phase-lock loop circuit. The RF signal is output to match network and bandpass filter and then is transmitted by antenna. The antenna is made of copper wire which length is about 35cm. Common grounding on PCB is not connected to real external ground. Power supply is DC 12V.

104 104 104 75R 104 75R 104 10u 100P 10u 104 POLSTVDOEVCKVSTUVGNDEDGSVCCV9VGLV2VGHV6U/DGNDVCOMAVDDV14V11V8V5V3GNDR5R4R3R2R1R0GND PW069WX1-A GNDG5G4G3G2G1G0STHLREVGNDCLKVCCSTHRLD_OEHB5B4B3B2B1B0R/LV1V4V7V10V12V13AVDDGNDVCOM PW069WX1-B 12R 2R 27R 100R 0R 68R 51R 1R2 104104104 104 30R 30R 0R 91R 20 66.5R 215 0R 104104104 104 56R 0R 51R 0R 104 104 100 33R 15R 2R7 0R 20R 12R 2R 104 104104 100R 2R 104 33R NC NC GND NC VDD RST 102 FB FB 100P 75R 100P 50K nc 10k 10k 10u 33R SCK SI SOCS GNDWPHOLDVCC EN25F512A 10K 2.2uF 2.2uF 22pF G7/D_POL/DTCON4 G6/D_STHR/DTCON5 GOUT5GOUT4 GOUT3/LVA0MGOUT2/LVA0PGOUT1/LVA1MGOUT0/LVA1P R7/D_OEH/DTCON6 R6/D_UD/DTCON7 ROUT5/LVA2MROUT4/LVA2P ROUT3/LVACKMROUT2/LVACKP ROUT1/LVA3MROUT0/LVA3P VDDP2GNDP2 HS/D_CPV/DTCON8 VS/D_STVR/DTCON9 D_STVL/DTCON10 CLKO RESETTESTIN POWER_ON_RSTN AVDD_MPLL AVSS_FSCPLL HSYNCIN VSYNCIN XTALIN XTALOUT AVSS_XTAL AVDD_XTAL VREXT_CDAC AVDD_OPLL GNDC1 VDDC1 ROM_EN D_STHL/DTCON1 B7/D_RL/DTCON2 B6/D_LD/DTCON3 BOUT5 BOUT4 BOUT3 BOUT2 BOUT1 BOUT0 INTOUT GNDP1 VDDP1 AVSS_ADCVCLAMPVRMVRPAVDD_ADCC1INPC1INMYS1INPYS1INMCVBS1PCVBS1MAVDD_GMCVINFAULTZAVSS_SARAVSS_DPWMAVDD_SARFB2_DPWMFB1_DPWMAVDD_DPWMQ2Q1VDDCAVDD_PWMAVSS_PWM PWMOUT2 FB2 SENSE2 PWMOUT1 FB1 SENSE1 CP1_FB CP1_N CP1_P REF_PWM PGOOD SAR0 SAR1 SAR2 SCK SDI SDO CSN PWM1D PWM2D SDA/GPIO0/P0_0 SCL/GPIO1/P0_1 INT ISP_DATA ISP_CLK MST715C 33R 100nF 10K 22pF 12MHZ 1M 33R 104 104 104 47uF/10V BAV99 SOT23 SS14 1uF VIN FB SW ENGND Act6311 15V 120K BAV99 SOT23 6.8V 9K1 1uF 1uF 100uH VINENGND ADJOUT AP2204K-ADJ 56K 9k1 10K 27K 0.1uF 0.1uF 47uF/10V 0.1uF 0.1uF 0.1uF 10uF DTA143ZKA 10uF 0.1uF 10uF 100K 300K 2R2 104 104 0.1uF 1K 510R 100K 10K 104 104 104 10u 0.1uF 33R 10K 10K nc/* 10K 10K 10uF/25V 47uF/10V 10uF/25V 10uF/25V 10uF/25V 10uF/25V 104 104 104 10u 104 10u 104 220 6k8 100 NCNC 4k7 33R VIN FB SW GNDEN VIP AP3031 2R 100UH 104 104/* 104 2R SS14 100UH 10K 220K 100k 47uF/10V 47uF/10V 1k 22uF/16V 104 104 FB FB FB FB FB FB AP1117-3v3 40074007 100R100R 220 220 4.7u 123456789 1011121314 1*14P_1.25mm 33R 33R 33R 33R 33R 33R 33R C91 C92 C94 R119 C133 R141 C129 C73 C86 C76 C77 CON4 CON7 R1 R2 R3 R4 R5 R6 R9 R10 C1C2C3 C4 R11 R12 R13 R14 R15 R16 R17 R18 C5C6C7 C8 R19 R20 R21 R22 C9 C10 R23 R24 R25 R39 R45 R48 R49 R52 C11C12C13 C14 R53 R54 C15 R71 R72 C57 L10 L11 C23 R31 C36 VR2 R34 R35 R36 C26 R41 U1 R66 C37 C32 C34 U5 R47 C40 R62 C56 R116 R7 C20 C21 C29 C53 T3 T4 T6 T7 D24 D25 C178 U25 D26 R128 D29 D30 R130 C183 C184 L12 U26 R132 R135 R136 R137 C163 C145 C170 C148 C47 C33 C52 Q1 C28 C30 C38 R8 R26 R29 C39 C42 C43 R32 R33 R37 R38 C45 C46 C49 C55 C35 R40 R44 R46 R50 R59 R61 C58 C59 C61 C62 C63 C64 C66 C24 C31 C67 C68 C17 C50 R65 R30 CN3 R67R27R28R42 T1 T2 R68 IC1 R70 L2 C48 C54 C69 R74 D4 L7 CN2 R76 R77 R79 C71 C60 R51 C16 C18 C19 L4 L8 L3 L5 L6 L9 U2 D1D2 R60R43 R55 R56 C27 CON2 RP10RP8 RP14RP15 RP11 RP12 RP13 T5 ABCD 6 5 4 3 2 1 DCBA 背光调节 DEBUG TCON10 =DEO = STVLTCON9 =VSYNC = STVRTCON8 =HSYNC = CPVTCON7 =R6 = U/DTCON6 =R7 = OEHTCON5 =G6 = STHRTCON4 =G7 = POLTCON3 =B6 = LDTCON2=B7 = R/L -7V/1mA 15V/1mA RESET Circuit 背光开关 SHENZHEN HCN ELECTRONICS CO. LTD. F101 DRAWN BY: DATE: DESCRIPTION:CHECKED BY;APPROVED:CAD NO:MODEL: DATE:DATE: MST715 CW SAR*3+GPIO*2+PWM*21C1S+DPWMMST715CD_PANEL w/TCON + + + + + + + + + + + TFT5V GAM+9V TFT3V3 GNDV V1 V2V3 V4 V5V6 V7 V8 V9 V10 R5 R4R3 R2 R1 R0 G5 G4 G3G2G1 G0 B5B4B3B2 B1 B0 TFTD1 TFTD2 TFT-Y TFT-C DT_STHL DCLK B7/DT_LR REV G7/DT_POL G6/DT_STHR VGL VGH DT_STVD VS/DT_STVU HS/DT_CKV R6/DT_UD V11 V12V13 V14 GNDV GNDV GAM+9V V1 V2V3V4V5 V6 V7 V9 V10V11V12V13V14 V8 R7/DT_OEV B6/DT_LD EDGS TFT-CVBS GNDV AGND GNDV GNDV GNDV TFT5V ROUT0ROUT2 R2R1R0 ROUT3ROUT1 R3 AVDD_DPWM DTCON7DTCON10DTCON9ROUT4ROUT5DTCON8CLKODTCON6GOUT4GOUT2DTCON5 POWER_ON_RST XTALI GOUT0 VIN_FB DTCON2 BOUT0BOUT1 BOUT2 BOUT3 GOUT5 XTALO BOUT4 GOUT1 BOUT5 DTCON1 DTCON3 GOUT3DTCON4DT_STHLB7/DT_LR B4B5 B6/DT_LD B0B1B2B3 G7/DT_POL G4G5 G6/DT_STHR G0G1G2G3 R7/DT_OEV R4R5 R6/DT_UD P_VCC_EN B6/DT_LD B7/DT_LR B3 B2 B1 B0B5 B4 G5 G4 G7/DT_POL G6/DT_STHR G1 G0 R7/DT_OEVR6/DT_UD G3 G2 R5R4 R3 R2 R1 R0 DT_STHL VS/DT_STVU HS/DT_CKV DCLK DT_STVD 715_3V3 1V8A DAY/NIGHT TFT5V TFT-CTFT-YTFT-CVBSTFT5VBK-PWRTFTIRTFTD2 TFT5V VGL VGH GAM+9V A 1V8A TFT3V3 TFT5V 715_3V3 TFT5V TFT5V 1V8 1V8 GNDV 1V8A V-EN V-EN AGND AGND BK-PWR DAY/NIGHT BK-PWR LED- LED+ TFT5V GND GND TFTIR TFTD3 TFTD1TFTD3 A 123456789 101112131416151718192021222324252627282930 123456789 101112131415161718192021222324252627282930 5 3 4 2 1 6521 4378 75747372717069686766656463626160595857565554535251 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 123456789 10111213141819171516202122232524 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 21 3 6 31 42 21 3 132 45 1234 6 31 24 5 1 2 21 1 2 3 1234567891011121314 1234 5678 1234 5678 1234 5678 1234 5678 1234 5678 1234 5678 1234 5678 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 4.3mm 47R LED LED 3k6 1K5 8k2 LED_W VCC GND IR IR LED 100R LED LED_W 2k2 100R 47u/16v LED_W 4.3mm 4.3mm 4.3mm 4.3mm 4.3mm 680 820 510 4.3mm 4.3mm 4.3mm 1k2 10k 47uF/16V LINRIN+5V CONTGND1GND2GND3GND4 LED_OUT LEDV+ +12VCC AUDIO IR MODULE 1k 1k FB 2P-2.0 330P RFOUT GND VCC GND D2 D3 LIN RIN D1 D0 AUDIO FMT MOUDLE NC NC NC NC 330P JACK3 10 10K 10K 0.1uF LED LED LED 100p 220220 0R DTC144EVA DTC144EVA 10uF/16V LED 47R LEDLEDLED 47R LEDLEDLED 24k 123456789 10111213141516 1*16P_1.25mm FB 47u/16v C8550 10K 1K 4.3mm LED_W 78l03 SW5 R12 D1 D5 R9 R7 R10 LED24 1 2 3 RM1 D6 R6 D11 LED25 R8 R22 C3 LED22 SW4 SW3 SW1 SW2 SW6 R1 R3 R4 SW7 SW9 SW10 R5 1 2 R28 12 C5 1345291011876 U1 1 2 R29 1 2 R30 12 L2 2 1 J9 12 C303 4 2 5 3 8 7 6 1 9 10 U2 12 C54 R34 12 R36 3 1 2 U11 1 2 C107 1 2 3 J3 R193 1 2 R195 1 2 R197 C4 D2 D3 D4 C1 1 2 R17 1 2 R18 L1 R19 Q2 Q3 12 C2 D14 R11 D7D8D9 R13 D10D12D13 R14 12345678910111213141516 CON1 1 2 L3 Q1 C7 Q4 1 2 R2 1 2 R15 SW8 LED21 3 1 2 U4 STOP EJECT 2.5V 3.5V POWER FMM 3.0V 4.5V 4.0V 16:9/4:3 VOL+ 1.50V 2.03V 0.49V VOL- PLAY 1.01V 0V PIC MODE POWER(RED) 5MM WHITE LED 9PCS 3MM WHITE LED 4P…

Text truncated - open the document above for the full version.

Page 1 of 47 FCC ID: XMF-AVXMTG10U ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20102191 FCC CERTIFICATION On Behalf of Lightcomm Technology Co., Ltd. Roof Mount monitor with DVD Model No.: AVXMTG10U, F101 FCC ID: XMF-AVXMTG10U Prepared for : Lightcomm Technology Co., Ltd. Address : Rooms M207-8, Haleson Building, 1 Jubilee Street Central, Hong Kong Prepared by : Accurate Technology Co., Ltd. Address : F1, Bldg. A, Changyuan New Material Port, Keyuan Rd. Science & Industry Park, Nanshan, Shenzhen, Guangdong P.R. China Tel: (0755) 26503290 Fax: (0755) 26503396 Report Number : ATE20102191 Date of Test : November 22-23, 2010 Date of Report : November 26, 2010 Page 2 of 47 FCC ID: XMF-AVXMTG10U ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20102191 TABLE OF CONTENTS Description Page Test Report Certification 1. GENERAL INFORMATION.......................................................................................................... 4 1.1. Description of Device (EUT)....................................................................................................................4 1.2. Description of Test Facility......................................................................................................................4 1.3. Measurement Uncertainty.........................................................................................................................5 2. MEASURING DEVICE AND TEST EQUIPMENT..................................................................... 6 3. SUMMARY OF TEST RESULTS................................................................................................... 7 4. HARMONICS AND SPURIOUS RADIATED EMISSION FOR FCC PART 15 SECTION 15.239(C)..................................................................................................................................................... 8 4.1. Block Diagram of Test Setup....................................................................................................................8 4.2. The Emission Limit for section 15.239(c)................................................................................................9 4.3. Configuration of EUT on Measurement...................................................................................................9 4.4. Operating Condition of EUT..................................................................................................................10 4.5. Test Procedure........................................................................................................................................10 4.6. The Field Strength of Radiation Emission Measurement Results..........................................................11 5. FUNDAMENTAL RADIATED EMISSION FOR FCC PART 15 SECTION 15.239(B)........ 17 5.1. Block Diagram of Test Setup..................................................................................................................17 5.2. The Emission Limit For Section 15.239(b)............................................................................................17 5.3. EUT Configuration on Measurement.....................................................................................................18 5.4. Operating Condition of EUT..................................................................................................................18 5.5. Test Procedure........................................................................................................................................18 5.6. The Emission Measurement Result........................................................................................................19 6. OCCUPIED BANDWIDTH FOR FCC PART 15 SECTION 15.239(A)................................... 25 6.1. The Requirement For Section 15.239(a).................................................................................................25 6.2. EUT Configuration on Measurement.....................................................................................................25 6.3. Operating Condition of EUT..................................................................................................................25 6.4. Test Procedure........................................................................................................................................25 6.5. Test Result..............................................................................................................................................26 7. TUNING RANGE........................................................................................................................... 27 7.1. The Requirement For Section 15.239.....................................................................................................27 7.2. EUT Configuration on Measurement.....................................................................................................27 7.3. Operating Condition of EUT..................................................................................................................27 7.4. Test Procedure........................................................................................................................................27 7.5. Test Result..............................................................................................................................................28 APPENDIX I ( TEST CURVES) (18 pages) Page 3 of 47 Test Report Certification Applicant : Lightcomm Technology Co., Ltd. Manufacturer : Huizhou Hengdu Electronics Co., Ltd. EUT Description : Roof Mount monitor with DVD (A) MODEL NO.: AVXMTG10U, F101 (B) SERIAL NO.: N/A (C) POWER SUPPLY: DC 12V Measurement Procedure Used: FCC Rules and Regulations Part 15 Subpart C Section 15.239: 2008 ANSI 63.4: 2003 The device described above is tested by ACCURATE TECHNOLOGY CO. LTD to determine the maximum emission levels emanating from the device. The maximum emission levels are compared …

Text truncated - open the document above for the full version.

Radiated emissions test˖TX with DVD Radiated emissions test: TX with SD card