XMF-MID105810.1inch Tablet

60mm 240mm 100mm 100mm 1) Press and hold “” (power) for 1 second to turn off tablet . 2) Tap Power Off. Quick Setup Guide 10.1 Inch Octa Core Tablet Features Important safety instructionsFCC Notice AVISO FCCDeclaración de advertenciaLa Warning Statement 1. Charging the battery Note: Charge your tablet fully before using it the first time. 1 Connect the USB cable to your tablet. 2 Connect the other end of the USB cable to the USB power adapter (wall charger), then plug the adapter into a power outlet. It takes about three hours to fully charge your tablet. Caution: Use only the included power adapter to charge your tablet's battery. An incompatible adapter may damage your tablet. When you turn on your tablet for the first time, you'll be prompted to set up things like Wi-Fi and email. Follow the instructions displayed on your tablet to complete setup. Press and hold the (power) button on the side of your tablet. To wall outlet 2. Turning on your tablet Welcome English (united Kingdom) English (united States) Espanol (españa) 3. Setting up your tablet 4. Turning off your tablet: Guía de instalación rápida 10.1 Inch Octa Core Tableta Características Importante instrucciones de seguridad 1. Carga de la batería Nota: cargue el paquete de baterías completa- mente antes de usarlo por primera vez. 1) Conecte el cable USB a su tableta. 2) Enchufe el otro extremo del cable USB al adaptador de alimentación USB (cargador de pared) y conecte el adaptador en un tomacorrien- te. Se necesita aproximadamente tres horas para cargar completamente su tableta. Cuidado: use solamente el adaptador de alimentación incluido la batería de su tableta. Un adaptador incompatible puede dañar su tableta. Cuando encienda su tableta por primera vez, se le pedirá configurar funciones como Wi-Fi y el correo elctrónico. Siga las instrucciones que se muestran en su tableta para completar la instalación. Mantenga presionado el botón (encendido) en la parte lateral de su tableta. To wall outlet 2. Encendido de su tableta Welcome English (united Kingdom) English (united States) Espanol (españa) 3. Preparación de su tableta 4. Para apagar su tableta: www.digi-land.net Made in China www.digi-land.net Hecho en China 1)Please read this instruction carefully before using your device to ensure safe and correct use. 2)Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. 3) Do not use this unit near water. Do not place over the unit any container with liquid inside. 4)Please do not put your device in high temperature, moisture or dust place. The tablet is not waterproof. 5) Avoid falling or violent collision. Do not violently shake the touch screen, otherwise, it could lead to damage or display abnormal. 6) If system shutdown automatically, it means the battery may used up, battery charging is required. 7)Please charge the tablet regularly if not in use for a long time to avoid the damage caused by the excessive consumption of battery. 8)Do not disassemble or use alcohol, thinner or benzene class to swab product surface. 9)Please do not use the tablet when driving or walking in the street, otherwise it may lead an accident. 10) Please choose the appropriate volume, if had tinnitus, please lower the volume or stop using. 11) When CPU operates in high speed, especially playing 3D games or High-definition video for a long time, the fuselage will have fever. 12)The battery is contained with the device, please do not take out the battery. 1)Por favor, lea atentamente este manual antes de usar su dispositivo con el fin de asegurar el uso seguro y correcto. 2)Siempre deje suficiente espacio para ventilación alrededor del producto. No ponga el producto en la cama, alfombra, librero o gabinete que pueda obstruir la corriente de aire a través de apeturas de ventilación. 3)No utilice esta unidad cerca de agua. No coloque sobre la unidad ningún recipiente con líquido en su interior. 4)Por favor, no ponga el dispositivo en alta temperatura, humedad o el lugar lleno de polvo; la tableta no es resistente al agua. 5)Evitar caída o colisión violenta, no agitar violentamente la pantalla táctil, de lo contrario, podría provocar daños o visualización anormal. 6) Si el sistema se apague de forma automática, será arrancable de nuevo poco después de la parada. 7) Por favor, cargue la tableta con regularidad si no usarla durante mucho tiempo para evitar daños causados por el consumo excesivo de la batería. 8)No desmonte, ni utilice alcohol, disolvente o clase benceno para frotar la superficie del producto. 9)Por favor, no use la tableta cuando se conduce o se camina por la calle, de lo contrario puede provocar un accidente. 10)Por favor, elija el volumen adecuado, si tenía tinnitus, por favor, baje el volumen o deje de usar. 11)Cuando la CPU se funciona bajo alta velocidad, especialmente en los juegos 3D o en modo de reproducción a largo tiempo de alta definición de vídeo, el fuselaje tendrá el fenómeno de fiebre. 12) La batería está contenida con el dispositivo, por favor The following statement applies to all products that have received FCC approval. Applicable products wear the FCC logo, and /or an FCC ID in the format FCC ID: XMF-MID1036 on the product label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and(2)this device must accept any interference received, including interference that may cause undesired operation. This mobile device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause har…

Text truncated - open the document above for the full version.

Lightcomm Technology Co., Ltd. UNIT 1306 13/F ARION COMMERCIAL CENTRE,2-12 QUEEN'S ROAD WEST,SHEUNG WAN HK,CHINA Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-7-5 To whom it may concern: We, Lightcomm Technology Co., Ltd., hereby certify that the equipment for which authorization is sought (FCC ID: XMF-MID1058) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, {新申请人签名} Signature Jack Sun Certification Manager Lightcomm Technology Co., Ltd. 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii)-U, V03

Lightcomm Technology Co., Ltd. UNIT 1306 13/F ARION COMMERCIAL CENTRE,2-12 QUEEN'S ROAD WEST,SHEUNG WAN HK,CHINA Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-7-5 U.S. Agent Designation Ligh tcomm Technology Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: XMF- MID1058): Name and company of U.S. agent: ACT Lab LLC Physical U.S. address of agent: 3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent: 0033465568 Email address of U.S. agent: [email protected] ACT Lab LLC acknowledges their obligation to accept service of process on behalf of Lightcomm Technology Co., Ltd.. Lightcomm Technology Co., Ltd. with the FRN [0018979138] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, {新申请人签名} Signature Jack Sun Certification Manager Lightcomm Technology Co., Ltd. {代理商签名} Signature Scott Huber Senior Technical Director ACT Lab LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

Lightcomm Technology Co., Ltd. Add: UNIT 1306 13/F ARION COMMERCIAL CENTRE,2-12 QUEEN'S ROAD WEST,SHEUNG WAN HK,CHINA Date: 2024-7-5 FCC ID: XMF-MID1058 Dear Sir/Madam, We, Lightcomm Technology Co., Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: 10.1" Tablet Model no.: DL1050, MID1058-AD Sincerely, {新申请人签名} Name/Title： Jack Sun/Certification Manager Company: Li ghtcomm Technology Co., Ltd. Address: UNIT 1306 13/F ARION COMMERCIAL CENTRE,2-12 QUEEN'S ROAD WEST,SHEUNG WAN HK,CHINA Phone: +0085-221913611 Fax: +0085-221913612 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-7-5> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name XMF-MID1058 DL1050 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, {新申请人签名} Name/Title： Jack Sun/Certification Manager Company: Lightcomm Technology Co., Ltd. Address: UNIT 1306 13/F ARION COMMERCIAL CENTRE,2-12 QUEEN'S ROAD WEST,SHEUNG WAN HK,CHINA Phone: +0085-221913611 Fax: +0085-221913612 E-Mail: [email protected]

Lightcomm Technology Co., Ltd. UNIT 1306 13/F ARION COMMERCIAL CENTRE,2-12 QUEEN'S ROAD WEST,SHEUNG WAN HK,CHINA Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-7-5 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: XMF-MID1058 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, {新申请人签名} Name/Title： Jack Sun/Certification Manager Company: Lightcomm Technology Co., Ltd. Address: UNIT 1306 13/F ARION COMMERCIAL CENTRE,2-12 QUEEN'S ROAD WEST,SHEUNG WAN HK,CHINA Phone: +0085-221913611 Fax: +0085-221913612 E-Mail: [email protected]

FCC ID: XMF-MID1058 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: XMF-MID1058 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: XMF-MID1058 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: XMF-MID1058 TB-RF-074-1.0 Photo 7 Adapter Appearance

FCC ID: XMF-MID1058 TB-RF-074-1.0 Appendix I Label Appendix II Label Location FCC ID: XMF-MID1058 Model: DL1050

FCC ID: XMF-MID1058 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 8 Internal of EUT Photo 9 Appearance of PCB FCC ID: XMF-MID1058 TB-RF-074-1.0 Photo 10 Appearance of PCB Photo 11 Antenna Appearance FPC Antenna FCC ID: XMF-MID1058 TB-RF-074-1.0 Photo 12 Battery Appearance

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 47 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China SARTestReport For ApplicantName:LightcommTechnologyCo.,Ltd. Address: UNIT130613/FARIONCOMMERCIALCENTRE,2-12QUEEN' SROADWEST,SHEUNGWANHK EUTName:10.1"Tablet ModelNumber:DL1050 SeriesModelNumber:MID1058-AD IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF240626R00401 TestStandards: 47CFRPart2.1093IEC/IEEE62209-1528:2020 IEEEC95.1-2019KDB447498D01KDB865664D01 KDB865664D02KDB941225D06KDB248227D01 KDB616217D04KDB648474D04KDB690783D01 FCCID:XMF-MID1058 TestConclusion:Pass TestDate:2024-06-27to2024-06-28 DateofIssue:2024-07-04 PreparedBy: AmendaZhong/ProjectEngineer Date:2024-07-04 ApprovedBy: Ryan.CJ/EMCManager Date:2024-07-04 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF240626R00401 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 47 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02024-07-04Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF240626R00401 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 47 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction...............................................................................................................................................................................4 1.1IdentificationofTestingLaboratory.................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation..........................................................................................................4 1.3LaboratoryCondition.......................................................................................................................................................4 1.4Announcement................................................................................................................................................................4 2.ProductInformation..................................................................................................................................................................5 2.1ApplicationInformation....................................................................................................................................................5 2.2ManufacturerInformation................................................................................................................................................5 2.3FactoryInformation.........................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT).....................................................................................................5 2.5EquipmentunderTestAncillaryEquipment....................................................................................................................5 2.6TechnicalInformation......................................................................................................................................................5 3.SummaryofTestResults.........................................................................................................................................................6 3.1TestStandards................................................................................................................................................................6 3.2DeviceCategoryandSARLimit......................................................................................................................................7 3.3TestResultSummary......................................................................................................................................................7 3.4TestUncertainty..............................................................................................................................................................8 4.MeasurementSystem.............................................................................................................................................................10 4.1SpecificAbsorptionRate(SAR)Definition....................................................................................................................10 4.2MVGSARSystem.........................................................................................................................................................10 5.SystemVerification.................................................................................................................................................................15 5.1PurposeofSystemCheck.............................................................................................................................................15 5.2SystemCheckSetup.........................................................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 1 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 RF Test Data for 5G Wi-Fi (Conducted Measurements) General Description of EUT Product Name: 10.1" Tablet Test Model: DL1050 Sample ID: HC-C-202406-0032-01-02 Environmental Conditions Temperature: 24.6°C Relative Humidity: 52.2% Test Voltage: DC 3.8V Test Engineer: MikeYan Note: For a more detailed features description, please refer to the report TBR-C-202406-0032-43 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 2 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 Contents 1. Emission Bandwidth....................................................................................................................................... 3 1.1.Test Result ......................................................................................................................................... 3 2.1.Test Graphs ....................................................................................................................................... 4 2. Occupied channel bandwidth ...................................................................................................................... 16 2.1.Test Result ....................................................................................................................................... 16 2.2.Test Graphs ..................................................................................................................................... 17 3. Min emission bandwidth ............................................................................................................................. 29 3.1.Test Result ....................................................................................................................................... 29 3.2.Test Graphs ..................................................................................................................................... 30 4. Maximum conducted output power ............................................................................................................ 36 4.1.Test Result ....................................................................................................................................... 36 4.2.Test Graphs ........................................................................................................ 错误!未定义书签。 5. Maximum power spectral density ............................................................................................................... 37 5.1.Test Result ....................................................................................................................................... 37 5.2.Test Graphs ..................................................................................................................................... 38 6. Band edge measurements ........................................................................................................................... 50 6.1.Test Result ....................................................................................................................................... 50 6.2.Test Graphs ..................................................................................................................................... 52 7. Emissions in Restricted Bands ...................................................................................................................... 62 7.1.Test Result ....................................................................................................................................... 62 7.2.Test Graphs ..................................................................................................................................... 67 8. Conducted Spurious Emission ...................................................................................................................... 86 8.1.Test Result ....................................................................................................................................... 86 8.2.Test Graphs ..................................................................................................................................... 88 9. Frequency Stability .................................................................................................................................... 112 9.1.Test Result ..................................................................................................................................... 112 10. Duty Cycle ................................................................................................................................................ 114 10.1.Test Result ................................................................................................................................... 114 10.2.Test Graphs ................................................................................................................................. 115 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 3 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 1. Emission Bandwidth 1.1.Test Result TestMode Antenna Channel 26db EBW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11A Ant1 5180 24.16 5168.52 5192.68 --- --- 5200 23.00 5188.12 5211.12 --- --- 5240 22.56 5228.04 5250.60 --- --- 5745 24.76 5732.68 5757.44 --- --- 5785 22.08 5774.00 5796.08 --- --- 5825 23.52 5814.16 5837.68 --- --- 11N20SISO Ant1 5180 21.32 5169.28 5190.60 --- --- 5200 24.96 5187.96 5212.92 --- --- 5240…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 76 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 11AC20SISO_Ant1_High_5240_Peak 11AC20SISO_Ant1_Low_5745_AV 11AC20SISO_Ant1_Low_5745_Peak Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 77 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 11AC20SISO_Ant1_High_5825_AV 11AC20SISO_Ant1_High_5825_Peak 11AC40SISO_Ant1_Low_5190_AV Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 78 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 11AC40SISO_Ant1_Low_5190_Peak 11AC40SISO_Ant1_High_5230_AV 11AC40SISO_Ant1_High_5230_Peak Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 79 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 11AC40SISO_Ant1_Low_5755_AV 11AC40SISO_Ant1_Low_5755_Peak 11AC40SISO_Ant1_High_5795_AV Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 80 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 11AC40SISO_Ant1_High_5795_Peak 11AX20SISO_Ant1_Low_5180_AV 11AX20SISO_Ant1_Low_5180_Peak Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 81 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 11AX20SISO_Ant1_High_5240_AV 11AX20SISO_Ant1_High_5240_Peak 11AX20SISO_Ant1_Low_5745_AV Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 82 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 11AX20SISO_Ant1_Low_5745_Peak 11AX20SISO_Ant1_High_5825_AV 11AX20SISO_Ant1_High_5825_Peak Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 83 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 11AX40SISO_Ant1_Low_5190_AV 11AX40SISO_Ant1_Low_5190_Peak 11AX40SISO_Ant1_High_5230_AV Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 84 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 11AX40SISO_Ant1_High_5230_Peak 11AX40SISO_Ant1_Low_5755_AV 11AX40SISO_Ant1_Low_5755_Peak Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 85 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 11AX40SISO_Ant1_High_5795_AV 11AX40SISO_Ant1_High_5795_Peak Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. ReportNo.:TBR-C-202406-0032-43 Page: 86 of 126 FCC ID: XMF-MID1058 TB-RF-074-1.0 8. Conducted Spurious Emission 8.1.Test Result TestMode Antenna Channel FreqRange [MHz] Max. Fre [MHz] Max. Level [dBm] Limit [dBm] Verdict 11A Ant1 5180 30~1000 900.85 -44.6 ≤-27 PASS 1000~40000 6952.7 -38.06 ≤-27 PASS 5200 30~1000 892.58 -45.31 ≤-27 PASS 1000~40000 6974.8 -38.51 ≤-27 PASS 5240 30~1000 889.41 -43.32 ≤-27 PASS 1000~40000 6937.1 -38.11 ≤-27 PASS 5745 30~1000 960.31 -43.32 ≤-27 PASS 1000~40000 39368.2 -38.84 ≤-27 PASS 5785 30~1000 888.57 -43.84 ≤-27 PASS 1000~40000 6939.7 -37.89 ≤-27 PASS 5825 30~1000 865.39 -44.67 ≤-27 PASS 1000~40000 6995.6 -36.41 ≤-27 PASS 11N20SISO Ant1 5180 30~1000 959.86 -45.14 ≤-27 PASS 1000~40000 6947.5 -38.71 ≤-27 PASS 5200 30~1000 509.18 -46.01 ≤-27 PASS 1000~40000 6835.7 -38.08 ≤-27 PASS 5240 30~1000 889.76 -45.12 ≤-27 PASS 1000~40000 6991.7 -37.83 ≤-27 PASS 5745 30~1000 966.71 -45.3 ≤-27 PASS 1000~40000 6850 -38.14 ≤-27 PASS 5785 30~1000 889.6 -45.27 ≤-27 PASS 1000~40000 6982.6 -37.2 ≤-27 PASS 5825 30~1000 898.66 -45.57 ≤-27 PASS 1000~40000 6956.6 -37.72 ≤-27 PASS 11N40SISO Ant1 5190 30~1000 897.88 -45.42 ≤-27 PASS 1000~4…

Text truncated - open the document above for the full version.