XMF-F101-J1Roof Mount Monitor with DVD

10.1 -Inch LED Backlit LCD Roof-Mount DVD Player With DVD/CD/MP 3 SYSTEM AVXMTG 10UA OPERATION MANUAL TABLE OF CONTENTS Important Notices ......................................................................................................................................... 2Congratulations .............................................................................................................................................. 3Features ............................................................................................................................................................... 3Controls and Indicators Diagram ......................................................................................................... 4Remote Control Operation ...................................................................................................................... 6DVD Basics .......................................................................................................................................................10Loading and Playing Discs .....................................................................................................................12Settings and Adjustments......................................................................................................................12Playing JPG Files ...........................................................................................................................................16Playing MP3 Files .........................................................................................................................................17FM Modulator ................................................................................................................................................17Source Features ............................................................................................................................................18Troubleshooting ...........................................................................................................................................20Specifications .................................................................................................................................................22Notes ...................................................................................................................................................................23 1 IMPORTANT NOTICES 2 An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver only if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.When connecting power and ground in a mobile video installation, insure that the ACC wire is fused at the point where it is connected to the vehicle’s ACC wiring. Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point and the mobile video product.An LCD panel and/or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. WARNINGS• Do not use any solvents or cleaning materials when cleaning the video monitor. • Do not use any abrasive cleaners, they may scratch the screen.• Use only lightly dampened lint free cloth to wipe the screen if it is dirty.• Lock the LCD screen in fully closed position when not in use. • Before putting on headphones, always adjust the volume setting to OFF or lowest position. • Remember to leave the dome light switch in the off or auto position when the vehicle is unattended, as the dome lights, if left on, can drain the vehicle battery. • Do not put pressure on the screen.• Caution children to avoid touching or scratching the screen, as it may become dirty or damaged. Safety PrecautionsFor safety reasons, when changing video media, it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. System adjustments can be accomplished using the remote control, while seat-belts remain fastened. Enjoy your AUDIOVOX entertainment system but remember that the safety of all passengers remains the number one priority.Licensed under one or more of the following patents, Patent Numbers 5,775,762, 5,927,784, and 6,678,892. 3 CONGRATULATIONSFEATURES Congratulations on your purchase of the AUDIOUVOX AVXMTG10UA DVD player with Drop-Down Video/Monitor. The AVXMTG10UA player has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow in order to familiarize yourself with the product to ensure that you obtain the best results from your equipment.• 10.1” TFT LCD monitor• LED Backlight• Built-in DVD Player• Selectable (A and B) IR receive and transmit codes• Multi-Lingual On Screen Display (OSD) for control of picture quality and functions• Audio/Video source inputs• Dome lights with built-in three way switch• Last memory for DVD• Built-in 16 channel frequency wireless FM modulator• Headphone jack• Screen mode selection (16:9, 4:3)• Backlight controls• Day/night picture modes• A/V output• USB/SD support 4 CONTROLS AND INDICATORS DIAGRAM 1 2 3 4 5 6 7 8 910 11 12 1 13 1415 16 17 Front View 1. Dome Lights - Provides additional interior illumination.2. SOURCE (S) Button - Press to select the source menu (DVD/AV IN/CARD/ USB). 3. VOLUME ( + ) Button - Press this button to increase the volume or …

Text truncated - open the document above for the full version.

Lightcomm Technology Co., Ltd. April 5, 2012 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, ______ Lightcomm Technology Co., Ltd. ___hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product Description: Roof Mount monitor with DVD Model name: F101-J, AVXMTG10UA, F902-J, AVXMTG9A B/P/S, F1203-J, AVXMTG12U, AV X M T G 1 2 U A We affirm that between SIEMIC and _ Lightcomm Technology Co., Ltd. __, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature: Client’s name / title: Jiang Lin Huang / EMC Engineer Contact information / address: Rooms M207-8, Haleson Building, 1 Jubilee Street Central, Hong Kong

SCS-F19: Confidentiality Request Letter Page 1 of 1 Rev 2.0 Lightcomm Technology Co., Ltd. April 5, 2012 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: XMF-F101-J1 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Operational Description - Schematic The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature: Client’s name / title: Jiang Lin Huang / EMC Engineer Contact information / address: Rooms M207-8, Haleson Building, 1 Jubilee Street Central, Hong Kong

Accurate Technology Co., Ltd. Address: F1, Bldg. A&D, Changyuan New Material Port, Keyuan Rd., Science & Industry Park, Nanshan District, Shenzhen 518057 , P. R. China Tel: +86-755-26503290 Fax: +86-755-26503396 E-mail: [email protected] Http://www.atc-lab.com 1) How does this device operate? This device is a FM stereo transmitting configuration, which radiates FM wave on the air by modulating the any required signal to the carrier signal. The transmission frequency is set from 88.1 to 91.1MHz (step freq.:0.2MHz) This product can be powered by an DC to DC regulator within the cigarette-lighter adapter. 2) Provide information on the device and its antenna. This product is designed to transmits audio signal from DVD disk external audio player to car stereo. The transmitter utilizes dipole antenna. The antenna was soldered to PCB. 3) How is it installed? The transmitter is powered from 12V in car. It can be connected to the car power socket outlet only. 4) What test procedure was used? Operating condition is according to ANSI C63.4-2003 5) If tested in a car, how was it configured/tested? Not tested in a car, it was tested in a chamber. 6) Was the tuning range properly verified? The test lab should indicate in the report that the tuning controls were manually adjusted to verify maximum tuning range. EUT was adjusted to work at the selected channels: 88.1 MHz, 89.7 MHz, and 91.1 MHz. The EUT will not allow operation below 88.1 MHz and will not allow operation above 91.1 MHz. Press the remote control (see the manual and page 8) to select the transmission frequency. We have indicated the testing in the test report, see clause 7. 7) Was the bandwidth properly tested with maximum audio input? The test was performed with the maximum audio input. And play typical audio signal(music song). We have indicated the operating condition in the test report, see clause 6.3. 8) Provide the test report. Test Report Submitted. signature ： name ：Sean Liu Title: Manager Telephone: 008675526503290 Email:[email protected] Date: 2012-4-12

Lightcomm Technology Co., Ltd. April 5, 2012 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD FCC ID: XMF-F101-J1 To Whom It May Concern: This letter is to ascertain that Lightcomm Technology Co., Ltd. （Product：Roof Mount monitor with DVD Model name: F101-J, AVXMTG10UA, F902-J, AVXMTG9A B/P/S, F1203-J, AVXMTG12U, AVXMTG12UA）has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Client’s signature: Client’s name / title: Jiang Lin Huang / EMC Engineer Contact information / address: Rooms M207-8, Haleson Building, 1 Jubilee Street Central, Hong Kong

FCC Certification Label Sample

FCC Certification label location Sample Label location

FM Wireless Module Antenna FM Wireless Module FM Wireless Module Infra-red module Infra-red module

Page 1 of 33 FCC ID: XMF-F101-J1 ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20120578 FCC CERTIFICATION On Behalf of Lightcomm Technology Co., Ltd. Roof Mount monitor with DVD Model No.: F101-J, AVXMTG10UA, F902-J, AVXMTG9A B/P/S, F1203-J, AVXMTG12U, AVXMTG12UA FCC ID: XMF-F101-J1 Prepared for : Lightcomm Technology Co., Ltd. Address : Rooms M207-8, Haleson Building, 1 Jubilee Street Central, Hong Kong Prepared by : Accurate Technology Co., Ltd. Address : F1, Bldg. A, Changyuan New Material Port, Keyuan Rd. Science & Industry Park, Nanshan, Shenzhen, Guangdong P.R. China Tel: (0755) 26503290 Fax: (0755) 26503396 Report Number : ATE20120578 Date of Test : April 5-11, 2012 Date of Report : April 11, 2012 Page 2 of 33 FCC ID: XMF-F101-J1 ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20120578 TABLE OF CONTENTS Description Page Test Report Certification 1. GENERAL INFORMATION .......................................................................................................... 4 1.1. Description of Device (EUT)....................................................................................................................4 1.2. Description of Test Facility ......................................................................................................................4 1.3. Measurement Uncertainty.........................................................................................................................5 2. MEASURING DEVICE AND TEST EQUIPMENT ..................................................................... 6 3. SUMMARY OF TEST RESULTS................................................................................................... 7 4. HARMONICS AND SPURIOUS RADIATED EMISSION FOR FCC PART 15 SECTION 15.239(C) ..................................................................................................................................................... 8 4.1. Block Diagram of Test Setup....................................................................................................................8 4.2. The Emission Limit for section 15.239(c) ................................................................................................9 4.3. Configuration of EUT on Measurement ...................................................................................................9 4.4. Operating Condition of EUT ..................................................................................................................10 4.5. Test Procedure ........................................................................................................................................10 4.6. The Field Strength of Radiation Emission Measurement Results ..........................................................11 5. FUNDAMENTAL RADIATED EMISSION FOR FCC PART 15 SECTION 15.239(B) ........ 14 5.1. Block Diagram of Test Setup..................................................................................................................14 5.2. The Emission Limit For Section 15.239(b) ............................................................................................14 5.3. EUT Configuration on Measurement .....................................................................................................15 5.4. Operating Condition of EUT ..................................................................................................................15 5.5. Test Procedure ........................................................................................................................................15 5.6. The Emission Measurement Result ........................................................................................................16 6. OCCUPIED BANDWIDTH FOR FCC PART 15 SECTION 15.239(A) ................................... 19 6.1. The Requirement For Section 15.239(a).................................................................................................19 6.2. EUT Configuration on Measurement .....................................................................................................19 6.3. Operating Condition of EUT ..................................................................................................................19 6.4. Test Procedure ........................................................................................................................................19 6.5. Test Result ..............................................................................................................................................20 7. TUNING RANGE ........................................................................................................................... 21 7.1. The Requirement For Section 15.239 .....................................................................................................21 7.2. EUT Configuration on Measurement .....................................................................................................21 7.3. Operating Condition of EUT ..................................................................................................................21 7.4. Test Procedure ........................................................................................................................................21 7.5. Test Result ..............................................................................................................................................22 8. ANTENNA REQUIREMENT........................................................................................................ 23 8.1. The Requirement ....................................................................................................................................23 8.2. Antenna Construction .............................................................................................................................23 APPENDIX I ( TEST CURVES) (9 pages) Page 3 of 33 FCC ID: XMF-F101-J…

Text truncated - open the document above for the full version.

Radiated emissions test