XMF-F902TXRoof Mount Monitor with DVD

9-inch Roof-Mount DVD Player AVXMTG9B/P/S OPERATION MANUAL With DVD/CD/MP3 System TABLE OF CONTENTS ImportantNotices...... ... ... ... ... ... ... ... ... ... 2Congratulations ....... ... ... ... ... ... ... ... ... ... 3 Features .. ... ....... ... ... ... ... ... ... ... ... ... 3Controls and Indicators Diagram . . . . . . . . . . . . . . . . . . . . . 4Remote Control Operation. . . . . . . . . . . . . . . . . . . . . . . . . . 6Loading and Playing Discs. . . . . . . . . . . . . . . . . . . . . . . ...12 Settings and Adjustments . . . . . . . . . . . . . . . . . . . . . . . ...12 Playing JPG Files ...... ... ... ... ... ... ... ... ... ...16 Playing MP3 Files ..... ... ... ... ... ... ... ... ... ...17 SourceFeatures....... ... ... ... ... ... ... ... ... ...18Troubleshooting ....... ... ... ... ... ... ... ... ... ...20 Specifications . ....... ... ... ... ... ... ... ... ... ...22 DVDBasics ... ....... ... ... ... ... ... ... ... ... ...10Notes..... ... ....... ... ... ... ... ... ... ... ... ...23 1 Safety PrecautionsFor safety reasons, when changing video media, it isrecommended that the vehicle is not in motion, and that you donot allow children to unfasten seat-belts to change video mediaor make any adjustments to the system. System adjustments canbe accomplished using the remote control, while seat-beltsremain fastened. Enjoy your AUDIOVOX entertainment systembut remember that the safety of all passengers remains thenumber one priority. An LCD panel and/or video monitor may be installed in a motorvehicle and visible to the driver only if the LCD panel or videomonitor is used for vehicle information, system control, rear orside observation or navigation. If the LCD panel or video monitoris used for television reception, video or DVD play, the LCD panelor video monitor must be installed so that these features will onlyfunction when the vehicle is in “park” or when the vehicle'sparking brake is applied.When connecting power and ground in a mobile videoinstallation, insure that the ACC wire is fused at the point where itis connected to the vehicle’s ACC wiring. Failure to do so canresult in damage to the vehicle if a short circuit develops betweenthe vehicle connection point and the mobile video product.An LCD panel and/or video monitor used for television reception,video or DVD play that operates when the vehicle is in gear orwhen the parking brake is not applied must be installed to the rearof the driver seat where it will not be visible, directly or indirectly,to the operator of the motor vehicle. WARNING Do not use any solvents or cleaning materials when cleaningthe video monitor. Do not use any abrasive cleaners, they may scratch the screen.Use only lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in fully closed position when not in use.Before putting on headphones, always adjust the volume setting to OFF or lowest position. Remember to leave the dome light switch in the off or auto position when the vehicle is unattended, as the dome lights, ifleft on, can drain the vehicle battery. Do not put pressure on the screen.Caution children to avoid touching or scratching the screen, as it may become dirty or damaged IMPORTANT NOTICES 2 Licensed under one or more of the following patents, PatentNumbers 5,775,762, 5,927,784, and 6,678,892. CONGRATULATIONS 3 FEATURES 9” TFT LCD monitorBuilt-in DVD playerAuto on with disc insertionSelectable IR transmit codesMulti-lingual OSD (On Screen Display) for control of picture quality and functionsAudio/Video source inputsDome lights with built-in three way switchLast memory for DVDBuilt-in 16 channel frequency wireless FM modulatorEarphone jackScreen mode selection (16:9/4:3)Backlight controlsDay/night picture modesAV outputUSB/SD support Congratulations on your purchase of the AUDIOUVOX AVXMTG9B/P/S DVD player with Drop-Down Video/Monitor. TheAVXMTG9/B/P/S DVD player has been designed to give you and your family many years of video entertainment in the mobileenvironment. Please read the directions that follow in order to familiarize yourself with the product to ensure that you obtain thebest results from your equipment. 1. EJECT( ) Button - Press this button to eject discs from the disc compartment. ( ) Button - Press this button to select or aspect ratios. Button - , h , , Ch3 88.5 Mhz, ,,,,,, ,,, ,,,. SCREEN RELEASE (PRESS) Button - Press this button to release theLCD screen. The screen will drop down slightly. Pivot the screendownward until a comfortable viewing angle is reached Button - Press d Press to adjust in the following sequence: Brightness, Contrast, Hue, Saturation, Reset. 6 SOURCE Button - Press to select the source menu: DVD/AV1/SD/USB.7. POWER( ) Button - Press this button to turn the system on or off.8. STOP( ) Button - Press this button to stop playback.9. PLAY/PAUSE( ) Button - Press to start playback or pause playing.10. VOLUME ( ) Button - Press this button to decrease the volume or decrease the level of selected picture controls. 11. VOLUME ( ) Button - Press this button to increase the volume or increase the level of selected picture controls. 12. DOME LIGHTS - Provides additional interior illumination.13. Ventilation openings14. LCD Cut Off Switch - Used to turn off the LCD screen when in the closed position. 15. 9” LCD screen16. Wireless Headphone Transmitter - Transmits audio to an optional wireless headphone. 17. Infrared Remote Sensor - Allows remote control to operate the unit.2. SCREEN MODE Wide (16:9) Normal (4:3) 3. FMM Used to select the frequency in sequence rotation: FM OFF C 1 88.1 Mhz Ch2 88.3 Mhz Ch4 88.7 Mhz Ch5 88.9 Mhz Ch6 89.1 Mhz Ch7 89.3 Mhz Ch8 89.5 Mhz Ch9 89.7 Mhz Ch10 89.9MHz Ch11 90.1 Mhz Ch12 90.3 Mhz Ch13 90.5 Mhz Ch14 90.7 Mhz Ch15 90.9 Mhz Ch16 91.1 Mhz 4. . 5. PIC to enter the picture a justment mode. -+ CONTROLS AND INDICATORS DIAGRAM 4 Front View 1. DVD disc insertion slot - For loading and removing disks. Unit will turn on and load a disk when a dis…

Text truncated - open the document above for the full version.

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

1) How does this device operate? Playing DVD and powered from Car Cigarette lighter.. 2) Provide information on the device and its antenna. The transmitter’s antenna is a copper wire which length is about 35cm, this is permanently attached antenna and meets the requirements of the section. 3) How is it installed? The EUT will direct plug into IPod unique connector. And power by 12Vdc Car Power. 4) What test procedure was used? Operating condition is according to ANSI C63.4-2003 5) If tested in a car, how was it configured/tested? N/A 6) Was the tuning range properly verified? The test lab should indicate in the report that the tuning controls were manually adjusted to verify maximum tuning range. EUT was adjusted to work at the selected channels: 88.1 MHz, 89.7 MHz, and 91.1 MHz. The EUT will not allow operation below 88.1 MHz and will not allow operation above 91.1 MHz. 7) Was the bandwidth properly tested with maximum audio input? Emissions from the intentional radiator shall be confined within a band 200 kHz wide centered on the operation frequency. The 200 kHz band shall lie wholly within the frequency range of 88 – 108 MHz. Setup the EUT and simulators as shown in the report. Enable RF signal and confirm EUT active. Modulate output capacity of EUT up to specifications. 8) Provide the test report. Test Report Submitted. signature ： name ：Sean Liu Title: Manager Telephone: 008675526503290 Email:[email protected] Date: 2010-11-04 Accurate Technology Co., Ltd. Address: F1, Bldg. A&D, Changyuan New Material Port, Keyuan Rd., Science & Industry Park, Nanshan District, Shenzhen 518057 , P. R. China Tel: +86-755-26503290 Fax: +86-755-26503396 E-mail: [email protected] Http://www.atc-lab.com

FCC Certification label Sample

FCC Certification Label Location Sample Label location

Antenna

Applicant：Lightcomm Technology Co., Ltd. FCC ID：XMF-F902TX Operation Description FM transmission is achieved by MTK IC MT1389P to control ROHM IC BH1411 via interface I2C. Its working voltage is 3.3 V. Oscillator frequency is 16 MHz. There are 16 frequencies of transmission. IC BH1411 has functions of audio stereo modulation and RF modulation, the RF stability is controlled by internal phase-lock loop circuit. The RF signal is output to match network and bandpass filter and then is transmitted by antenna. The antenna is made of copper wire which length is about 35cm. Common grounding on PCB is not connected to real external ground. Power supply is DC 12V.

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 5 5 4 4 3 3 2 2 1 1 DD CC BB AA FM TX MODULE FM TX MODULE 1 OF 1 2009/03/18 3.0 SHEN ZHEN HCN ELECTRONICS.,LTD REV MOD RCORD DOCUMENT: TITLE: DRAWER:DESIGN:APPROVED:STANDARD: ITEM NO: RCH +3V3 ANT LCH SDA SCL SDA SCL RCH ANT +3 V3 LCH +3V3 R2 7K5 C19 33P C4 0.1uF R1410K R61K R2010K C8222PC6 102P R4 7K5 C3 10uF R10510 X116M C9 105P R13 4K7 R1210K C17 100P C20*** C15 105P + C11 22uF D1 KV-1476 R510K R710K R1810K C16 33P C13 330P U1BH1411F 5 6 7 8 1 2 3 4 16 15 14 9 10 11 1213 20 19 18 17 24 23 22 21 GND PHD-OUT GATE DRAIN RIN R-EMP FLT MPX D0-SCL BUS-MODE X-OSC VCC RF-OSC RF-GND RF-OUTPLL-VCC D4-3W D3-SER D2-AD2 D1-SDA LIN L-EMP PDOWN MUTE C12 474P R818K L2 82NH 12 R910K R1115K R1910K R310K C2 102P C14 222P C7 222P C21 *** R1610K C101U CON1 1 2 3 4 5 6 7 8 9 10 11 12 13 R15 22K R173K3 C1 105P R110K L1 82NH 12 C5 105P C18 100P PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

Page 1 of 47 FCC ID: XMF-F902TX ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20102244 FCC CERTIFICATION On Behalf of Lightcomm Technology Co., Ltd. Roof Mount monitor with DVD Model No.: F902, AVXMTG9B, AVXMTG9S, AVXMTG9P FCC ID: XMF-F902TX Prepared for : Lightcomm Technology Co., Ltd. Address : Rooms M207-8, Haleson Building, 1 Jubilee Street Central, Hong Kong Prepared by : Accurate Technology Co., Ltd. Address : F1, Bldg. A, Changyuan New Material Port, Keyuan Rd. Science & Industry Park, Nanshan, Shenzhen, Guangdong P.R. China Tel: (0755) 26503290 Fax: (0755) 26503396 Report Number : ATE20102244 Date of Test : November 2-3, 2010 Date of Report : November 3, 2010 Page 2 of 47 FCC ID: XMF-F902TX ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20102244 TABLE OF CONTENTS Description Page Test Report Certification 1. GENERAL INFORMATION .......................................................................................................... 4 1.1. Description of Device (EUT)....................................................................................................................4 1.2. Description of Test Facility ......................................................................................................................4 1.3. Measurement Uncertainty.........................................................................................................................5 2. MEASURING DEVICE AND TEST EQUIPMENT ..................................................................... 6 3. SUMMARY OF TEST RESULTS................................................................................................... 7 4. HARMONICS AND SPURIOUS RADIATED EMISSION FOR FCC PART 15 SECTION 15.239(C) ..................................................................................................................................................... 8 4.1. Block Diagram of Test Setup....................................................................................................................8 4.2. The Emission Limit for section 15.239(c) ................................................................................................9 4.3. Configuration of EUT on Measurement ...................................................................................................9 4.4. Operating Condition of EUT ..................................................................................................................10 4.5. Test Procedure ........................................................................................................................................10 4.6. The Field Strength of Radiation Emission Measurement Results ..........................................................11 5. FUNDAMENTAL RADIATED EMISSION FOR FCC PART 15 SECTION 15.239(B) ........ 17 5.1. Block Diagram of Test Setup..................................................................................................................17 5.2. The Emission Limit For Section 15.239(b) ............................................................................................17 5.3. EUT Configuration on Measurement .....................................................................................................18 5.4. Operating Condition of EUT ..................................................................................................................18 5.5. Test Procedure ........................................................................................................................................18 5.6. The Emission Measurement Result ........................................................................................................19 6. OCCUPIED BANDWIDTH FOR FCC PART 15 SECTION 15.239(A) ................................... 25 6.1. The Requirement For Section 15.239(a).................................................................................................25 6.2. EUT Configuration on Measurement .....................................................................................................25 6.3. Operating Condition of EUT ..................................................................................................................25 6.4. Test Procedure ........................................................................................................................................25 6.5. Test Result ..............................................................................................................................................26 7. TUNING RANGE ........................................................................................................................... 27 7.1. The Requirement For Section 15.239 .....................................................................................................27 7.2. EUT Configuration on Measurement .....................................................................................................27 7.3. Operating Condition of EUT ..................................................................................................................27 7.4. Test Procedure ........................................................................................................................................27 7.5. Test Result ..............................................................................................................................................28 APPENDIX I ( TEST CURVES) (18 pages) Page 3 of 47 FCC ID: XMF-F902TX ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20102244 Test Report Certification Applicant : Lightcomm Technology Co., Ltd. Manufacturer : Huizhou Hengdu Electronics Co., Ltd. EUT Description : Roof Mount monitor with DVD (A) MODEL NO.: F902, AVXMTG9B, AVXMTG9S, AVXMTG9P (B) SERIAL NO.: N/A (C) POWER SUPPLY: DC 12V Measurement Procedure Used: FCC Rules and Regulations Part 15 Subpart C Section 15.239 ANSI 63.4: 2003 The device described above is tested by ACCURATE TECHNOLOGY C…

Text truncated - open the document above for the full version.

Radiated emissions test˖TX with DVD Radiated emissions test: TX with SD card