XMF-MDT1005MK10.1 inch QUAD CORE TABLET PDVD COMBO

SLTDVD1024 SYLVANIA is a registered trademark of OSRAM SYLVANIA INC. used under license. files OK Settings -->Connected devices--> Connection preferences-->Cast -->Tap the icon( ) on right corner to Enable wireless display--> You can find the external device name-->Click the external device name--> The external device will show connection info “DECLINE” or “ACCEPT”-->Click “ACCEPT” to connect. ?123 8. Transfer files between a tablet and PC c) You can locate the tablet on your PC as a removable disk. 6 (25.15*17.8*3.52cm) 4400 battery Up to 3h with DVD(default setting and test with earbud on) Up to 6h with wifi(default setting and test with earbud on) IPS DVD/VCD/CD/MP3(no blue-ray disc) Battery playback Wi-Fi Android 10(Go edition) Wi-Fi cannot be connected Make sure Wi-Fi is set on; Make sure the wireless router support Wi-Fi 802.11 b/g/n connections. “Safe Mode” appears at left bottom side Keep pressing , press “Restart” to restart the unit, it will get back to normal. Cannot turn on Charge the device until battery is full for first time use; For device not used for long, please charge about 5~10 minutes first, charging icon will appear. Chinese characters displayed when turning on It's caused by mis-operation. Please keep pressing , until system auto re-start. Google, Android, Google Play and other marks are trademarks of Google LLC that improperly burned discs cannot be recognized. To make a warranty claim, do not return this product to the store. Please email or call 1-800-968-9853. 90 days Warranty This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us. This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz).We exclude all claims for special,incidental, and consequential damages caused by breach of express orimplied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.For faster service, locate the model, type, and serial numbers on your appliance. [email protected] LIMITED PRODUCT WARRANTY Ver1.0, 0620

DATE:2020-07-17 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd. and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Lightcomm Technology Co., Ltd. and UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK, HONG KONG Signature: Name: Jack Sun Title: Certification Manager Company: Lightcomm Technology Co., Ltd.

Differences Declaration To whom concern, We company Lightcomm Technology Co., Ltd. hereby declares: The product models SLTDVD1024, SLTDVD1024_18DISP, MDT9001, MDT9002, MDT9003, MDT1001, MDT1002, MDT1005, MDT100X, DL9002, DL9003, DL1001, DL1002 are identical in the same PCB layout, interior structure and electrical circuits, the only difference is the model name for commercial purpose. Authorized signature: Date: 2020-07-24

Lightcomm Technology Co., Ltd. DATE : 2020-07-17 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: XMF-MDT1005MK Product Name: 10.1" QUAD CORE TABLET PDVD COMBO Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature: Name: Jack Sun Title: Certification Manager Company: Lightcomm Technology Co., Ltd.

Test model number: SLTDVD1024

10.0 mm 10.0 mm 79.8 mm 59.8 mm S/N ：A2008338340000001至A2008338340090000 IMPORTED BY/IMPORTÉE PAR: C.I.LTD. MISSISSAUGA, ON, L5S 2A3. CANADA. MADE IN CHINA/ FABRIQUÉ EN CHINE S/N:A2008338340000001 August,2020 79.8*59.8*0.2MM -0.1~0mm 20PHZ051-RL-V1.1 MDT1005 Cut line 切线 Remarks: 注释: 类型 Structure Style 材质/工艺 Material 尺寸 Size 公差 Tolerance 描述 Description Size marking 规格标注 文件名 File Name 机型 Project# 比例 Scale 1:1 设计 Designer 审核 Checked 设计日期 Design Date HuiHong Chen Sara 2020.07.21 technique 10.1" QUAD CORE TABLET/PDVD COMBO DC INPUT: 5V 2 A SLTDVD1024 TEMPERATURE CAUTION: Operating ambient temperature range: 0°C~40°C. Do not leave the player in a closed car on a sunny day, exposed to direct sunlight or near any source of heat such as a TV set. [Otherwise the surface may warp,change color or be damaged.] When the player is used for a long period,the surface may be hot, this is not a malfunction, however, take caution against burns. OTHER CAUTION: Charge only with the supplied power adaptor. BEWARE OF WATER SPLASH: For avoiding electric shock or short circuit,do not place the player near where liquid splashed. LASER BEAM WARNING: Do not stare at the laser beam. Strong light will cause eye injury. Complies with DHHS Rules 21 Subchapter J parts 1040-10 and 1040-11 at date of manufacture. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: XMF-MDT1005MK

Model No.: SLTDVD1024 Label location

Test model number: SLTDVD1024

Global United Technology Services Co., Ltd. Report No.: GTS202007000024F01 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 48 1 Cover Page Test Report (Bluetooth) Applicant: Lightcomm Technology Co., Ltd. Address of Applicant: UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK Manufacturer: Lightcomm Technology Co., Ltd. Address of Manufacturer: UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK Factory: Huizhou Hengdu Electronics Co., Ltd. Address of Factory: No.8 Huitai Road, Huinan High-tech Industrial Park, Huiao Avenue, Huizhou, Guangdong, China Equipment Under Test (EUT) Product Name: 10.1" QUAD CORE TABLET PDVD COMBO Model No.: SLTDVD1024, SLTDVD1024_18DISP, MDT9001, MDT9002, MDT9003, MDT1001, MDT1002, MDT1005, MDT100X, DL9002, DL9003, DL1001, DL1002 FCC ID: XMF-MDT1005MK Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: July 10, 2020 Date of Test: July 10-17, 2020 Date of report issued: July 17, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202007000024F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 48 2 Version Version No. Date Description 00 July 17, 2020 Original Prepared By: Date: July 17, 2020 Project Engineer Check By: Date: July 17, 2020 Reviewer Report No.: GTS202007000024F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 48 3 Contents Page 1 COVER PAGE .......................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 7 5.7 TEST LOCATION .................................................................................................................................. 7 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 7.1 ANTENNA REQUIREMENT ................................................................................................................... 10 7.2 CONDUCTED EMISSIONS ................................................................................................................... 11 7.3 CONDUCTED PEAK OUTPUT POWER .................................................................................................. 14 7.4 20DB EMISSION BANDWIDTH ............................................................................................................. 18 7.5 CARRIER FREQUENCIES SEPARATION ................................................................................................ 22 7.6 HOPPING CHANNEL NUMBER ............................................................................................................. 26 7.7 DWELL TIME ..................................................................................................................................... 28 7.8 PSEUDORANDOM FREQUENCY HOPPING SEQUENCE .......................................................................... 30 7.9 BAND EDGE ...................................................................................................................................... 31 7.9.1 Conducted Emission Method ..................................................................................................... 31 7.9.2 Radiated Emission Method ........................................................................................................ 35 7.10 SPURIOUS EMISSION .....................................................................…

Text truncated - open the document above for the full version.

Test model number: SLTDVD1024 Radiated Emission Conducted Emission